Structural Aspects of the Formation of Multilayer Composites from Dissimilar Materials upon High-Pressure Torsion.

A multi-metal composite was consolidated from the Ti50Ni25Cu25 and Fe50Ni33B17 alloys by room-temperature high-pressure torsion (HPT). The structural research methods used in this study were X-ray diffractometry, high-resolution transmission electron microscopy, scanning electron microscopy with an electron microprobe analyzer in the mode of backscattered electrons, and the measurement of indentation hardness and modulus of the composite constituents. The structural aspects of the bonding process have been examined. The method of joining materials using their coupled severe plastic deformation has been established to play a leading role in the consolidation of the dissimilar layers upon HPT.

Crystallization Features of Amorphous Rapidly Quenched High Cu Content TiNiCu Alloys upon Severe Plastic Deformation.

In recent years, the methods of severe plastic deformation and rapid melt quenching have proven to be an effective tool for the formation of the unique properties of materials. The effect of high-pressure torsion (HPT) on the structure of the amorphous alloys of the quasi-binary TiNi-TiCu system with a copper content of more than 30 at.% produced by melt spinning technique has been analyzed using the methods of scanning electron microscopy, X-ray diffraction analysis, and differential scanning calorimetry (DSC). The structure examinations have shown that the HPT of the alloys with a Cu content ranging from 30 to 40 at.% leads to nanocrystallization from the amorphous state. An increase in the degree of deformation leads to a substantial change in the character of the crystallization reflected by the DSC curves of the alloys under study. The alloys containing less than 34 at.% Cu exhibit crystallization peak splitting, whereas the alloys containing more than 34 at.% Cu exhibit a third peak at lower temperatures. The latter effect suggests the formation of regions of possible low-temperature crystallization. It has been established that the HPT causes a significant decrease in the thermal effect of crystallization upon heating of the alloys with a high copper content relative to that of the initial amorphous melt quenched state.