Organic-Inorganic Hybrid Materials: Tailoring Carbon Dioxide-Based Polycarbonate with POSS-SH Crosslinking.

A novel functional polycarbonate (PAGC), characterized by the presence of double bonds within its side chain, was successfully synthesized through a ternary copolymerization of propylene oxide (PO), allyl glycidyl ether (AGE), and carbon dioxide (CO2). Polyhedral oligomeric silsesquioxanes octamercaptopropyl (POSS-SH) was employed as a crosslinking agent, contributing to the formation of organic-inorganic hybrid materials. This incorporation was facilitated through thiol-ene click reactions, enabling effective interactions between the POSS molecules and the double bonds in the side chains of the polycarbonate. Scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) confirmed a homogeneous distribution of silicon (Si) and sulfur (S) in the polycarbonate matrix. The thiol-ene click reaction between POSS-SH and the polycarbonate led to a micro-crosslinked structure. This enhancement significantly increased the tensile strength of the polycarbonate to 42 MPa, a notable improvement over traditional poly (propylene carbonate) (PPC). Moreover, the cross-linked structure exhibited enhanced solvent resistance, expanding the potential applications of these polycarbonates in various plastic materials.

Biodegradable polycarbonates from lignocellulose based 4-pentenoic acid and carbon dioxide.

The production of biodegradable polycarbonate by copolymerizing CO2 with epoxides has emerged as an effective method to utilize CO2 in response to growing concerns about CO2 emissions and plastic pollution. Previous studies have mainly focused on the preparation of CO2-based polycarbonates from petrochemical-derived propylene oxide (PO) or cyclohexene oxide (CHO). However, to reduce dependence on fossil fuels, the development of 100% bio-based polymers has gained attention in polymer synthesis. Herein, we reported the synthesis of glycidyl 4-pentenoate (GPA) from lignocellulose based 4-pentenoic acid (4-PA), which was further copolymerized with CO2 using a binary catalyst SalenCoCl/PPNCl to produce bio-based polycarbonates with vinyl side chains and molecular weights up to 17.1 kg/mol. Introducing a third monomer, PO, allows for the synthesis of the GPA/PO/CO2 terpolymer, and the glass transition temperature (T g) of the terpolymer can be adjusted from 2°C to 19°C by controlling the molar feeding ratio of GPA to PO from 7:3 to 3:7. Additionally, post-modification of the vinyl side chains enables the production of functional polycarbonates, providing a novel approach to the preparation of bio-based materials with diverse side chains and functions.

Copolymerization of Carbon Dioxide with 1,2-Butylene Oxide and Terpolymerization with Various Epoxides for Tailorable Properties.

The copolymerization of carbon dioxide (CO2) with epoxides demonstrates promise as a new synthetic method for low-carbon polymer materials, such as aliphatic polycarbonate materials. In this study, a binary Schiff base cobalt system was successfully used to catalyze the copolymerization of 1,2-butylene oxide (BO) and CO2 and its terpolymerization with other epoxides such as propylene oxide (PO) and cyclohexene oxide (CHO). 1H nuclear magnetic resonance (1H NMR), diffusion-ordered spectroscopy (DOSY), gel permeation chromatography (GPC), and differential scanning calorimetry (DSC) confirmed the successful synthesis of the alternating terpolymer. In addition, the effects of the polymerization reaction conditions and copolymerization monomer composition on the polymer structure and properties were examined systematically. By regulating the epoxide feed ratio, polycarbonates with an adjustable glass transition temperature (Tg) (11.2-67.8 °C) and hydrophilicity (water contact angle: 85.2-95.2°) were prepared. Thus, this ternary polymerization method provides an effective method of modulating the surface hydrophobicity of CO2-based polymers and their biodegradation properties.

Sidechain Metallopolymers with Precisely Controlled Structures: Synthesis and Application in Catalysis.

Inspired by the cooperative multi-metallic activation in metalloenzyme catalysis, artificial enzymes as multi-metallic catalysts have been developed for improved kinetics and higher selectivity. Previous models about multi-metallic catalysts, such as cross-linked polymer-supported catalysts, failed to precisely control the number and location of their active sites, leading to low activity and selectivity. In recent years, metallopolymers with metals in the sidechain, also named as sidechain metallopolymers (SMPs), have attracted much attention because of their combination of the catalytic, magnetic, and electronic properties of metals with desirable mechanical and processing properties of polymeric backbones. Living and controlled polymerization techniques provide access to SMPs with precisely controlled structures, for example, controlled degree of polymerization (DP) and molecular weight dispersity (D), which may have excellent performance as multi-metallic catalysts in a variety of catalytic reactions. This review will cover the recent advances about SMPs, especially on their synthesis and application in catalysis. These tailor-made SMPs with metallic catalytic centers can precisely control the number and location of their active sites, exhibiting high catalytic efficiency.

Bis-cycloheptyl-fused bis(imino)pyridine-cobalt catalysts for PE wax formation: positive effects of fluoride substitution on catalytic performance and thermal stability.

The α,α'-bis(imino)-2,3:5,6-bis(pentamethylene)pyridyl-cobalt(ii) chlorides, [2,3:5,6-{C4H8C(N(2-R1-4-R3-6-R2C6H2))}2C5HN] CoCl2 (R1 = Me, R2 = R3 = CH(p-FPh)2Co1; R1 = Et, R2 = R3 = CH(p-FPh)2Co2; R1 = i-Pr, R2 = R3 = CH(p-FPh)2Co3; R1 = Cl, R2 = R3 = CH(p-FPh)2Co4; R1 = F, R2 = R3 = CH(p-FPh)2Co5; R1 = F, R2 = R3 = CHPh2Co5'', R1 = R2 = Me, R3 = CH(p-FPh)2Co6; R1 = R3 = Me, R2 = CH(p-FPh)2Co7), have been synthesized by a one-pot template reaction of α,α'-dioxo-2,3:5,6-bis(pentamethylene)pyridine, cobalt(ii) chloride and the respective aniline in n-butanol. By contrast, the mixed cobalt(ii) chloride/acetate complex, [2,3:5,6-{C4H8C(N(2-F-4,6-(CH(p-FPh)2)2C6H2))}2C5HN]CoCl(OAc) (Co5'), was isolated when the corresponding template reaction was carried out in acetic acid. Structural characterization of Co4, Co5 and Co5'' revealed distorted square pyramidal geometries while six-coordinate Co5', incorporating a chelating acetate ligand, exhibited a distorted octahedral geometry. On activation with either MAO or MMAO, 2-fluoride-4,6-bis{di(p-fluorophenyl)methyl}-substituted Co5 showed maximum catalytic activity for ethylene polymerization at a high operating temperature of 60 °C (up to 2.1 × 107 g (PE) mol-1 (Co) h-1), producing highly linear (Tms > 121 °C), low molecular weight polyethylene waxes (Mw range: 1.5-5.0 kg mol-1) with narrow dispersity (Mw/Mn range: 1.7-2.9). End-group analysis of the waxes reveals ß-H elimination as the dominant chain transfer process.

High molecular weight polyethylenes of narrow dispersity promoted using bis(arylimino)cyclohepta[b]pyridine-cobalt catalysts ortho-substituted with benzhydryl & cycloalkyl groups.

A one-pot template strategy has been utilized to synthesize sterically enhanced bis(imino)cyclohepta[b]pyridine-cobalt(ii) chlorides, [2-{(Ar)N[double bond, length as m-dash]CMe}-9-{N(Ar)}C10H10N]CoCl2 (Ar = 2-(C5H9)-4,6-(CHPh2)2C6H2Co1, 2-(C6H11)-4,6-(CHPh2)2C6H2Co2, 2-(C8H15)-4,6-(CHPh2)2C6H2Co3, 2-(C12H23)-4,6-(CHPh2)2C6H2Co4, 2,6-(C5H9)2-4-(CHPh2)C6H2Co5). All five complexes have been characterized by a combination of FT-IR spectroscopy, elemental analysis and single crystal X-ray diffraction. The molecular structures of Co1, Co3 and Co5 highlight the substantial steric hindrance imparted by the 2-cycloalkyl-6-benzhydryl or 2,6-dicyclopentyl ortho-substitution pattern; distorted square pyramidal geometries are exhibited in each case. On activation with methylaluminoxane (MAO) or modified methylaluminoxane (MMAO), all the complexes (apart from Co4/MAO) were active ethylene polymerization catalysts (up to 3.70 × 106 g PE per mol (Co) per h for Co5/MMAO), operating effectively at temperatures between 50 °C and 60 °C, producing polyethylenes with high molecular weights (up to 589.5 kg mol-1 for Co3/MAO). Furthermore, all polymers were highly linear (Tm > 130 °C) with narrow dispersities (Mw/Mn range: 2.0-3.0). The coexistence of two chain termination pathways, ß-H elimination and transfer to aluminum, has been demonstrated using 13C/1H NMR spectroscopy.

1,5-Naphthyl-linked bis(imino)pyridines as binucleating scaffolds for dicobalt ethylene oligo-/polymerization catalysts: exploring temperature and steric effects.

Six examples of dinuclear bis(imino)pyridine-cobalt(ii) complexes, [1,5-{2-(CMe[double bond, length as m-dash]N)-6-(CMe[double bond, length as m-dash]N(2,6-R12-4-R2-C6H2))C5H3N}2(C10H6)]Co2Cl4 (R1 = Me, R2 = H Co1; R1 = Et, R2 = H Co2; R1 = iPr, R2 = H Co3; R1 = Me, R2 = Me Co4; R1 = Et, R2 = Me Co5; R1 = CHPh2, R2 = Me Co6), have been prepared from the corresponding bis(tridentate) compartmental ligands (L1-L6) in reasonable yields. The molecular structures of Co3 and Co5 revealed two N,N,N-cobalt dichloride units to adopt anti-positions about the 1,5-naphthyl linking unit, with each cobalt center exhibiting a distorted trigonal bipyramidal geometry. On activation with either MAO or MMAO, Co1-Co6 were shown to promote both polymerization and oligomerization of ethylene with high overall activities (up to 1.03 × 107 gPE per·mol(Co) per·h for Co1/MAO at 70 °C). Curiously, on increasing the reaction temperature a larger proportion of polymer was noted, while at lower temperature an enhanced selectivity for oligomer was seen. In general, the oligomeric products displayed Schulz-Flory distributions with high selectivities for α-olefins (>99%). On the other hand, the highly linear polymers displayed narrow dispersities and comprised both fully saturated and unsaturated chain ends with the vinyl content (-CH[double bond, length as m-dash]CH2) found to rise with the reaction temperature. By modulating the steric hindrance exerted by the ortho-R1 substituents in the precatalyst, polyethylenes displaying a remarkably broad range of molecular weights could be obtained [from 4.52 kg mol-1 (R1 = Me) to 246.7 kg mol-1 (R1 = CHPh2)].

ortho-Cycloalkyl substituted N,N'-diaryliminoacenaphthene-Ni(ii) catalysts for polyethylene elastomers; exploring ring size and temperature effects.

A family of six unsymmetrical N,N'-diiminoacenaphthene-nickel(ii) bromide complexes, [1-{2,6-(Ph2CH)2-4-MeC6H2N}-2-(ArN)C2C10H6]NiBr2 (Ar = 2-(C6H11)-6-MeC6H2Ni1, 2-(C5H9)-6-MeC6H2Ni2, 2-(C8H15)-6-MeC6H2Ni3, 2-(C6H11)-4,6-Me2C6H2Ni4, 2-(C5H9)-4,6-Me2C6H2Ni5, 2-(C8H15)-4,6-Me2C6H2Ni6), each bearing one ring-size variable 4-R-2-methyl-6-cycloalkyl-substituted N-aryl group and one N'-4-methyl-2,6-dibenzhydrylphenyl group, have been prepared and fully characterized. The molecular structures of Ni1, Ni2, Ni3 and Ni5 reveal distorted tetrahedral geometries with different degrees of steric protection imparted by the two inequivalent N-aryl groups. On activation with either EASC or MMAO, all the precatalysts are highly active (up to 17.45 × 106 g PE mol-1 (Ni) h-1) for ethylene polymerization at 20-50 °C with their activities correlating with the type of cycloalkyl ortho-substituent: cyclooctyl (Ni6, Ni3) > the cyclopentyl (Ni5, Ni2) > cyclohexyl (Ni4, Ni1) for either R = H or Me. Moderately branched to hyperbranched polyethylenes (Tm's as low as 44.2 °C) can be obtained with molecular weights in the range 2.14-6.68 × 105 g mol-1 with the branching content enhanced by the temperature of the polymerization. Dynamic mechanical analysis (DMA) and monotonic tensile stress-strain tests have been employed on the polyethylene samples and reveal the more branched materials to show good elastic recovery properties (up to 75.5%).

N-(2,2-Dimethyl-1-(quinolin-2-yl)propylidene) arylaminonickel Complexes and Their Ethylene Oligomerization.

A series of N-(2,2-dimethyl-1-(quinolin-2-yl)propylidene) arylamines was sophisticatedly synthesized and reacted with nickel(II) bromine for the formation of the corresponding nickel complexes. All the organic compounds were characterized by IR, NMR spectra and elemental analysis, while all the nickel complexes were characterized by IR spectra and elemental analysis. On activation with ethylaluminium sesquichloride (EASC) and modified methylaluminoxane (MMAO), all nickel precatalysts exhibited good activities toward ethylene oligomerization, indicating the positive efficiency of gem-dimethyl substitutents; in which major hexenes were obtained with MMAO. The catalytic parameters were verified, and the steric and electronic influences of substituents with ligands were observed, with a slight change of activities under different ethylene pressures.