ABSTRACT
This research performed cellulase production by Aspergillus fumigatus A4112 and evaluated its potential use in palm oil mill effluent (POME) hydrolysis to recover oil simultaneously with the generation of fermentable sugar useful for biofuel production under non-sterilized conditions. Empty fruit bunch (EFB) without pretreatment was used as carbon source. The combination of nitrogen sources facilitated CMCase production. The maximum activity (3.27 U/mL) was obtained by 1.0 g/L peptone and 1.5 g/L (NH4)2SO4 and 20 g/L EFB at 40 °C for 7 days. High level of FPase activity (39.51 U/mL) was also obtained. Interestingly, the enzyme retained its cellulase activities more than 60% at ambient temperature over 15 days. In enzymatic hydrolysis, Triton X-100 was an effective surfactant to increase total oil recovery in the floating form. High yield of reducing sugar (50.13 g/L) and 21% (v/v) of floating oil was recoverable at 65 °C for 48 h. Methane content of the raw POME increased from 41.49 to 64.94% by using de-oiled POME hydrolysate which was higher than using the POME hydrolysate (59.82%). The results demonstrate the feasibility of the constructed process for oil recovery coupled with a subsequent step for methane yield enhancement in biogas production process that benefits the palm oil industry.
ABSTRACT
This study aimed to increase the value of brewers' spent grain (BSG) by using it as feedstock to produce lignocellulolytic enzymes and lactic acid (LA). Twenty-two fungal strains were screened for lignocellulolytic enzyme production from BSG. Among them, Trichoderma sp. showed the highest cellulase activity (35.84 ± 0.27 U/g-BSG) and considerably high activities of xylanase (599.61 ± 23.09 U/g-BSG) and ß-glucosidase (16.97 ± 0.77 U/g-BSG) under successive solid-state and submerged fermentation. The processes were successfully scaled up in a bioreactor. The enzyme cocktail was recovered and characterized. The maximum cellulase and xylanase activities were found at pH 5.0 and 50 °C, and the activities were highly stable at pH 4-8 and 30-50 °C. The enzyme cocktail was applied in simultaneous saccharification and fermentation of acid-pretreated BSG for LA production. The maximum LA obtained was 59.3 ± 1.0 g/L. This study has shown the efficient biovalorization of BSG, and this approach may also be applicable to other agro-industrial wastes.
Subject(s)
Cellulases , Lactic Acid , Fermentation , Bioreactors , Industrial Waste/analysis , Edible Grain/chemistryABSTRACT
Green biorefinery process was conducted to extract α-chitin and high-value co-products from shrimp shell waste through microbial fermentation using mature coconut water (MCW) as a sole nutrient source. Symbiotic co-lactic acid fermentation (Co-LAF) by Lactobacillus plantarum and Streptococcus thermophilus produced higher levels of lactic acid (LA) and protease activity than their mono-cultures, which led to greater demineralization (DM) and deproteinization (DP) of shrimp shell powder (SSP). After optimizing Co-LAF through Response Surface Methodology and successive fermentation by an acid-active proteolytic fungus Rhizopus oligosporus, the highest DM of 94.0 ± 0.91 % and DP of 86.7 ± 0.1 % were achieved. Based on FT-IR, XRD, and SEM analysis, the bio-extracted chitin had similar structural characteristics to commercial α-chitin but with better quality. These strategies not only contribute to environmentally-friendly and cost-effective extraction of α-chitin (303 ± 18 mg/g-SSP), but also co-produce LA (57.18 ± 0.89 g/L), acid protease (4.33 ± 0.5 U/mL), bio-calcium (277 ± 12 mg-CaSO4/g-SSP), protein hydrolysate (268 ± 5 mg/g-SSP), and pigments (28.78 ± 1.56 µg/g-SSP).
Subject(s)
Chitin , Lactobacillales , Animals , Chitin/chemistry , Fermentation , Lactobacillales/metabolism , Spectroscopy, Fourier Transform Infrared , Crustacea/metabolism , Peptide Hydrolases , Lactic AcidABSTRACT
The glycoside hydrolase (GH) 87 α-1,3-glucanase (Agl-EK14) gene was cloned from the genomic DNA of the gram-negative bacterium Flavobacterium sp. EK14. The gene consisted of 2940 nucleotides and encoded 980 amino acid residues. The deduced amino acid sequence of Agl-EK14 included a signal peptide, a catalytic domain, a first immunoglobulin-like domain, a second immunoglobulin-like domain, a ricin B-like lectin domain, and a carboxyl-terminal domain (CTD) involved in extracellular secretion. Phylogenetic analysis of the catalytic domain of GH87 enzymes suggested that Agl-EK14 is distinct from known clusters, such as clusters composed of α-1,3-glucanases from bacilli and mycodextranases from actinomycetes. Agl-EK14 without the signal peptide and CTD hydrolyzed α-1,3-glucan, and the reaction residues from 1 and 2% substrates were almost negligible after 1440 min reaction. Agl-EK14 hydrolyzed the cell wall preparation of Aspergillus oryzae and released glucose, nigerose, and nigero-triose from the cell wall preparation. After treatment of A. oryzae live mycelia with Agl-EK14 (at least 0.5 nmol/ml), mycelia were no longer stained by red fluorescent protein-fused α-1,3-glucan binding domains of α-1,3-glucanase Agl-KA from Bacillus circulans KA-304. Results suggested that Agl-EK14 can be applied to a fungal cell wall lytic enzyme.
Subject(s)
Flavobacterium , Glycoside Hydrolases , Flavobacterium/genetics , Flavobacterium/metabolism , Phylogeny , Glycoside Hydrolases/metabolism , Protein Sorting Signals/genetics , Cell Wall/metabolismABSTRACT
Oleaginous microalga Scenedesmus sp. SPP was rapidly immobilized in oleaginous fungal pellets by their opposite-surface-charges. Microalgae-fungal (MF) pellets were more effective in bioremediation of non-sterile secondary effluent than mono-culture. The optimal hydraulic retention time for dual bioremediation in semi-continuous mode was 72 h. The MF pellets coated with 0.4 %-chitosan improved removal efficiencies of COD, total nitrogen (TN), and total phosphorus (TP) up to 96.2±0.0 %, 88.2±2.8 % and 71.5±0.7 %, respectively, likely because of better cell retention and more nutrient adsorption and assimilation. Dual bioremediation by coated MF pellets was also successfully scaled up in 30-L bubble-column photobioreactors with improved COD, TN, and TP removal efficiencies of 98.5±0.0 %, 90.2±0.0 % and 79.5±2.1 %, respectively. This system also effectively removed CO2 from simulated flue gas at 71.2±0.4 % and produced biomass with high lipid content. These results highlight the effectiveness of bio-immobilization by fungal pellets; chitosan coating; and their practical applications in bioremediation and CO2 sequestration.
Subject(s)
Chitosan , Microalgae , Carbon Dioxide , Photobioreactors , Biodegradation, Environmental , Nitrogen , BiomassABSTRACT
Nigero-oligosaccharides are α-1,3-linked oligomers of glucose. Glycoside hydrolase 87 type α-1,3-glucanase Agl-KA from Bacillus circulans KA304 is an endo-lytic enzyme that releases nigero-oligosaccharides (tetra-, tri-, and di-saccharide) from α-1,3-glucan. α-1,3-Glucan is insoluble under natural conditions, thus the efficiency of enzymatic hydrolysis is low and only 5 mM of reducing sugars were released from 1% glucan by Agl-KA. To improve hydrolytic efficiency, α-1,3-glucan was solubilized by 1 M NaOH and alkaline-solubilized glucan was adjusted to approximately pH 8. As a result, glucan maintained a solubilized state. This alkaline-pretreated α-1,3-glucan (1%) was hydrolyzed by Agl-KA (0.64 nmol/mL) and approximately 11.6 mM of reducing sugars were released at 240 min of reaction. When 0.016, 0.032, and 0.13 nmol/mL enzyme were added, reducing sugar reached approximately 5.1, 7.5, and 9.8 mM, respectively, and reaction mixtures containing 0.016 and 0.032 nmol/mL enzyme gradually became cloudy. Our findings suggest α-1,3-glucan cannot maintain its solubilized state and gradually becomes insoluble. For deletion enzyme of α-1,3-glucan binding domains from Agl-KA (AglΔDCD-UCD) on glucan hydrolysis (2%), reducing sugar concentrations released by AglΔDCD-UCD were almost the same as Agl-KA. These findings suggest that alkaline-pretreated α-1,3-glucan maintains a soluble state during a short time period and that glucan is efficiently hydrolyzed even by α-1,3-glucanase without α-1,3-glucan binding domains.
Subject(s)
Glucans , Glycoside Hydrolases , Hydrolysis , Glucans/metabolism , Glycoside Hydrolases/metabolism , Oligosaccharides , SugarsABSTRACT
The GH-16 type ß-1,3-glucanase (BgluC16MK) gene of Lysobacter sp. MK9-1 was cloned to study its antifungal activities. BgluC16MK displays amino acid sequence similarity with GluC from L. enzymogenes strain N4-7. BgluC16MK includes a signal sequence, a catalytic domain and carbohydrate-binding module family 6-type ß-glucan binding domain (B-GBD). The expression of the BgluC16MK gene in Escherichia coli without the signal sequence resulted in antifungal activity at a dose of 0.6-0.8 nmol/disk. However, BgluC16MK displayed antifungal activity at a dose of 0.025 nmol/disk in combination with Chi19MK. Substrate-specific assay revealed that purified BgluC16MK hydrolyzed insoluble curdlan more readily than the soluble substrate. Furthermore, to explore the binding selectivity of B-GBD of BgluC16MK, we constructed a fusion protein (B-GBD-GFP) using the B-GBD and green fluorescent protein. The activity of the fusion protein against various substrates indicates that B-GBD was selective for glucans with ß-1,3-linkages. An additional study demonstrated the binding ability of B-GBD-GFP to the cell-wall of living fungi, such as T. reesei and Aspergillus oryzae. These findings suggest that BgluC16MK can be utilized to generate antifungal enzyme preparations and that the fusion protein B-GBD-GFP can be used to identify the fungal cell surface structure using ß-glucans.
ABSTRACT
Agl-KA, an α-1,3-glucan-hydrolyzing enzyme from Bacillus circulans KA-304, has three α-1,3-glucan-binding domains DS1, CB6, and DS2 (DCD). While their individual binding activities toward insoluble α-1,3-glucan and fungal cell-wall are weak, the three domains in combination bind strongly to the α-1,3-glucan and the cell-wall. In this study, we constructed DCD-tetraRFP by fusing DCD with DsRed-Express2, a tetrameric red fluorescent protein. DCD-tetraRFP forms a tetramer in an aqueous solution and contains twelve substrate-binding domains in one complex. We also constructed DCD-monoGFP by fusing DCD with AcGFP1, a monomeric green fluorescent protein. The molecular weight of DCD-tetraRFP and DCD-monoGFP were compared. The results of gel filtration chromatography and dynamic light scattering indicated that DCD-tetraRFP was larger than DCD-monoGFP, suggesting that DCD-tetraRFP had a tetrameric structure. In addition, DCD-tetraRFP bound to insoluble α-1,3-glucan strongly, and the amount of DCD-tetraRFP binding to 0.01% α-1,3-glucan was about twice of DCD-monoGFP. The Kd values of DCD-tetraRFP (measurements per subunit) and DCD-monoGFP were 0.16 and 0.84 µM, respectively. Adding DCD-tetraRFP to a suspension of α-1,3-glucan caused glucan aggregation; however, adding DCD-monoGFP did not. These data suggested that DCD-tetraRFP had four DCDs sterically arranged in different directions so that DCD-tetraRFP cross-linked with the substrate, causing aggregation. Lastly, the aggregates of DCD-tetraRFP and α-1,3-glucan captured Aspergillus oryzae conidia and decreased their biofilm formation by 80% in a 24-well dish.
Subject(s)
Cell Wall , Glucans , Biofilms , Cell Wall/metabolism , Glucans/metabolism , Luminescent Proteins , Red Fluorescent ProteinABSTRACT
Chitin extraction from shrimp shell powder (SSP) using protease-producing microbes is an attractive approach for valorizing shrimp shell waste because it is simple and environmentally friendly. In this study, the protease production and chitin extraction from SSP by Bacillus cereus HMRSC30 were simultaneously optimized using statistical approaches. As a result, fermentation in medium composed of 30 g/L SSP, 0.2 g/L MgSO4 · 7H2O, 3 g/L (NH4)2SO4, 0.5 g/L K2HPO4, and 1.5 g/L KH2PO4 (pH 6.5) for 7 days maximized protease production (197.75 ± 0.33 U/mL) to approximately 1.64-fold compared to unoptimized condition (126.8 ± 0.047 U/mL). This level of enzyme production was enough to achieve 97.42 ± 0.28% deproteinization (DP) but low demineralization (DM) of 53.76 ± 0.21%. The high DM of 90% could be easily accomplished with the post-treatment using 0.4 M HCl and acetic acid. In addition, the study evaluated the possible roadmap to maximize the value of generated products and obtain additional profits from this microbial process. The observation showed the possibility of serving crude chitin as a bio-adsorbent with the highest removal capacity against Coomassie brilliant blue (97.99%), followed by methylene blue (74.42%). The recovered protease exhibited the function to remove egg yolk stain, indicating its potential for use as a detergent in de-staining. The results corroborated the benefits of microbial fermentation by B. cereus HMRSC30 as green process for comprehensive utilization of shrimp shell waste as well as minimizing waste generation along the established process.
Subject(s)
Bacillus cereus , Chitin , Animals , Bacillus cereus/metabolism , Chitin/metabolism , Crustacea/metabolism , Fermentation , Peptide HydrolasesABSTRACT
Fungal xylanase was produced from lignocellulosic palm wastes through combined solid-state fermentation (SSF) and submerged fermentation (SmF) by Aspergillus tubingensis TSIP9 in a helical-impeller equipped bioreactor. The combined SSF-SmF promoted the xylanase production by 15 and 70% higher than SSF and SmF, respectively. Sequential purification yielded 7.4-fold purified xylanase with 9.07% recovery. The maximum activities of crude and purified xylanase were observed at the same pH of 5.0 and the same temperature of 50 °C while purified xylanase is more active and highly stable at a wider pH range of 3-8 and temperature of 30-60 °C. The half-life of purified xylanase at various temperatures was also much improved by 2-8 folds compared to crude xylanase. Michaelis-Menten constants, Vmax and Km, for purified xylanase are 2,602.8 U/mg and 32.4 mg/mL, respectively. Purified xylanase activity was most enhanced with Ca2+ followed by Zn2+ and Fe2+ at 10 mM while significantly inhibited by Co2+, Cu2+, Pb2+, and Ag+. This study has shown the effectiveness of combined SSF-SmF for xylanase production and superior properties of purified xylanase for industrial processes.
Subject(s)
Arecaceae/metabolism , Aspergillus/enzymology , Endo-1,4-beta Xylanases/isolation & purification , Fermentation , Bioreactors , Endo-1,4-beta Xylanases/metabolism , Half-Life , Hot Temperature , Hydrogen-Ion Concentration , KineticsABSTRACT
The chitin-assimilating gram-negative bacterium, Lysobacter sp. MK9-1, was isolated from soil and was the source of a glycoside hydrolase family 19-type chitinase (Chi19MK) gene that is 933-bp long and encodes a 311-residue protein. The deduced amino acid sequence of Chi19MK includes a signal peptide, an uncharacterized sequence, a carbohydrate-binding module family 12-type chitin binding domain, and a catalytic domain. The catalytic domain of Chi19MK is approximately 60% similar to those of ChiB from Burkholderia gladioli CHB101, chitinase N (ChiN) from Chitiniphilus shinanonensis SAY3T, ChiF from Streptomyces coelicolor A3(2), Chi30 from Streptomyces olivaceoviridisis, ChiA from Streptomyces cyaneus SP-27, and ChiC from Streptomyces griseus HUT6037. Chi19MK lacking the signal and uncharacterized sequences (Chi19MKΔNTerm) was expressed in Escherichia coli Rosetta-gami B(DE3), resulting in significant chitinase activity in the soluble fraction. Purified Chi19MKΔNTerm hydrolyzed colloidal chitin and released disaccharide. Furthermore, Chi19MKΔNTerm inhibited hyphal extension in Trichoderma reesei and Schizophyllum commune. Based on quantitative antifungal activity assays, Chi19MKΔNTerm inhibits the growth of Trichoderma viride with an IC50 value of 0.81 µM.
Subject(s)
Antifungal Agents/pharmacology , Chitinases/metabolism , Lysobacter/enzymology , Chitinases/genetics , Cloning, Molecular , Escherichia coli/genetics , Escherichia coli/metabolism , Lysobacter/genetics , Schizophyllum/drug effects , Trichoderma/drug effectsABSTRACT
The genes encoding α-1,3-glucanases (Agls; AglST1 and AglST2) from Streptomyces thermodiastaticus HF3-3 were cloned and were then expressed in Escherichia coli Rosetta-gami B (DE3). We purified the resultant histidine (His)-tagged α-1,3-glucanases (recombinant enzymes, rAglST1 and rAglST2). Both the recombinant enzymes were similar to the wild-type enzymes. We examined the effects of rAglST1 and rAglST2 on the formation and degradation of biofilms on glass plates with Streptococcus mutans NRBC 13955 by evaluating the biofilm content (%), release of reducing sugar (mM), release of S. mutans (log CFU/mL), and the biofilm structure using laser scanning microscopy (LSM). The results showed that after incubation for 16 h, rAglST1 and rAglST2 reduced the formation of biofilm to 52% and 49% of the control, respectively. The result may reflect the fact that the concentration of the reducing sugar and the number of S. mutans cells in the rAglATs-added medium were higher than in the control medium. After an 8-h treatment with rAglST1 and rAglST2, biofilms decreased to less than 60% of the control. The number of S. mutans cells in the reaction mixture gradually increased during the incubation period. The enzymes can degrade the biofilms that were pre-formed on the glass plate by more than 50% after a 30-min incubation in the presence of toothpaste ingredients (1% w/v of sodium fluoride, benzethonium chloride, and sodium dodecyl sulfate) at 50°C. Our study showed that rAglST1 and rAglST2 have advantageous properties for dental care applications.
Subject(s)
Bacterial Proteins/pharmacology , Biofilms/drug effects , Glycoside Hydrolases/pharmacology , Streptomyces/enzymology , Bacterial Proteins/genetics , Bacterial Proteins/metabolism , Biofilms/growth & development , Escherichia coli/genetics , Escherichia coli/metabolism , Glycoside Hydrolases/genetics , Glycoside Hydrolases/metabolism , Hydrogen-Ion Concentration , Recombinant Proteins/metabolism , Recombinant Proteins/pharmacology , Streptococcus mutans/drug effects , Streptococcus mutans/growth & development , Streptococcus mutans/metabolism , Streptomyces/genetics , Temperature , Toothpastes/chemistryABSTRACT
Xylanase producing bacteria, Bacillus subtilis, was bombarded by an atmospheric pressure plasma jet (APPJ) and screened for higher catalytic activity. The bacteria were bombarded with plasma of argon or helium with energy of 120 W for a duration of 1-5 min. A mutant with higher xylanase activity was observed under argon plasma treatment at 1 min on media containing xylan as substrate. Subsequently, the xylanase gene from the mutant was sequenced and named MxynA. Sequence analysis revealed only a single missense mutation on the MxynA gene causing amino acid substitution from threonine to serine at position 162 (T162S) within the xylanase protein of the mutant. Consequently, MxynA was subcloned into expression vector, pETDuet-1 under T7 promoter and expressed in E. coli BL21 (DE3). The optimum temperature and pH of MxynA and its parent expressed in E. coli, named CxynA were 60 °C and pH 5, respectively. Moreover, MxynA showed higher xylanase activity approximately 4 fold higher than that of the control upon a wide range of pH and temperature conditions. From kinetic parameters analysis, the mutant showed higher enzyme turnover (k cat) than the control. The hydrolysis ability of the MxynA enzyme on lignocellulosic wastes, such as rice straw, corncob and para grass was investigated using the released reducing sugar as an indicator. The MxynA enzyme showed a greater amount of reducing sugar released from all lignocellulosic wastes other than the control, particularly from para grass. This study demonstrated that the T162S mutation possibly improved the catalytic efficiency of MxynA.
ABSTRACT
The α-1,3-glucanase from Paenibacillus glycanilyticus FH11 (Agl-FH1), a member of the glycoside hydrolase family 87 (GH87), hydrolyzes α-1,3-glucan with an endo-action. GH87 enzymes are known to degrade dental plaque produced by oral pathogenic Streptococcus species. In this study, the kinetic analyses revealed that this enzyme hydrolyzed α-1,3-tetraglucan into glucose and α-1,3-triglucan with ß-configuration at the reducing end by an inverting mechanism. The crystal structures of the catalytic domain (CatAgl-FH1) complexed with or without oligosaccharides at 1.4-2.5 or 1.6 Å resolutions, respectively, are also presented. The initial crystal structure of CatAgl-FH1 was determined by native single-wavelength anomalous diffraction. The catalytic domain was composed of two modules, a ß-sandwich fold module, and a right-handed ß-helix fold module. The structure of the ß-sandwich was similar to those of the carbohydrate-binding module family 35 members. The glycerol or nigerose enzyme complex structures demonstrated that this ß-sandwich fold module is a novel carbohydrate-binding module with the capabilities to bind saccharides and to promote the degradation of polysaccharides. The structures of the inactive mutant in complexes with oligosaccharide showed that at least eight subsites for glucose binding were located in the active cleft of the ß-helix fold and the architecture of the active cleft was suitable for the recognition and hydrolysis of α-1,3-glucan by the inverting mechanism. The structural similarity to GH28 and GH49 enzymes and the results of site-directed mutagenesis indicated that three Asp residues, Asp1045, Asp1068, and Asp1069, are the most likely candidates for the catalytic residues of Agl-FH1. DATABASE: Structural data are available in RCSB Protein Data Bank under the accession numbers 6K0M (CatAgl-FH1), 6K0N (WT/nigerose), 6K0P (D1045A/nigerose), 6K0Q (D1068A/nigerose), 6K0S (D1069A/ nigerose), 6K0U (D1068A/oligo), and 6K0V (D1069A/oligo). ENZYMES: Agl-FH1, α-1,3-glucanase (EC3.2.1.59) from Paenibacillus glycanilyticus FH11.
Subject(s)
Biocatalysis , Glycoside Hydrolases/chemistry , Glycoside Hydrolases/metabolism , Paenibacillus/enzymology , Amino Acid Sequence , Catalytic Domain , Glucans/chemistry , Glucans/metabolism , Hydrolysis , Models, Molecular , Polysaccharides/chemistry , Polysaccharides/metabolism , Protein Conformation , Substrate SpecificityABSTRACT
Glycoside hydrolase (GH) 87-type α-1,3-glucanase hydrolyses the α-1,3-glucoside linkages of α-1,3-glucan, which is found in fungal cell walls and extracellular polysaccharides produced by oral Streptococci. In this study, we report on the molecular structure of the catalytic unit of GH 87-type α-1,3-glucanase, Agl-KA, from Bacillus circulans, as determined by x-ray crystallography at a resolution of 1.82 Å. The catalytic unit constitutes a complex structure of two tandemly connected domains-the N-terminal galactose-binding-like domain and the C-terminal right-handed ß-helix domain. While the ß-helix domain is widely found among polysaccharide-processing enzymes, complex formation with the galactose-binding-like domain was observed for the first time. Biochemical assays showed that Asp1067, Asp1090 and Asp1091 are important for catalysis, and these residues are indeed located at the putative substrate-binding cleft, which forms a closed end and explains the product specificity.
Subject(s)
Bacillus/enzymology , Bacterial Proteins/metabolism , Catalytic Domain , Glucans/metabolism , Glycoside Hydrolases/metabolism , Amino Acid Sequence , Bacillus/genetics , Bacterial Proteins/chemistry , Bacterial Proteins/genetics , Biocatalysis , Crystallography, X-Ray , Glycoside Hydrolases/chemistry , Glycoside Hydrolases/genetics , Kinetics , Models, Molecular , Mutation , Protein Binding , Protein Conformation , Sequence Homology, Amino Acid , Substrate SpecificityABSTRACT
The cellulose binding domain (CBD) of cellulosome-integrating protein A from Clostridium thermocellum NBRC 103400 was genetically fused to FMN-dependent NADH-azoreductase (AZR) and glucose 1-dehydrogenase (GDH) from Bacillus subtilis. The fusion enzymes, AZR-CBD and CBD-GDH, were expressed in Escherichia coli Rosetta-gami B (DE3). The enzymes were purified from cell-free extracts, and the specific activity of AZR-CBD was 15.1 U/mg and that of CBD-GDH was 22.6 U/mg. AZR-CBD and CBD-GDH bound strongly to 0.5 % swollen cellulose at approximately 95 and 98 % of the initial protein amounts, respectively. After immobilization onto the swollen cellulose, AZR-CBD and CBD-GDH retained their catalytic activity. Both enzymes bound weakly to 0.5 % microcrystalline cellulose, but the addition of a high concentration of microcrystalline cellulose (10 %) improved the binding rate of both enzymes. A reactor for flow injection analysis was filled with microcrystalline cellulose-immobilized AZR-CBD and CBD-GDH. This flow injection analysis system was successfully applied for the determination of glucose, and a linear calibration curve was observed in the range of approximately 0.16-2.5 mM glucose, with a correlation coefficient, r, of 0.998.
ABSTRACT
Extracellular α-1,3-glucanase HF90 (AglST2), with a sodium dodecyl sulfate (SDS)-PAGE-estimated molecular mass of approximately 91 kDa, was homogenously purified from the culture filtrate of Streptomyces thermodiastaticus HF3-3. AglST2 showed a high homology with mycodextranase in an amino acid sequence and demonstrated specificity with an α-1,3-glycosidic linkage of homo α-1,3-glucan. It has been suggested that AglST2 may be a new type of α-1,3-glucanase. The optimum pH and temperature of AglST2 were pH 5.5 and 60°C, respectively. AglST2 action was significantly stimulated in the presence of 5-20% (w/v) NaCl, and 1 mM metal ions Mn2+ and Co2+. On the other hand, it was inhibited by 1 mM of Ag+, Cu2+, Fe2+ and Ni2+. Regarding the stability properties, AglST2 retained more than 80% of its maximum activity over a pH range of 5.0-7.0 at up to 60°C and in the presence of 0-20% (w/v) NaCl. Based on these results, the properties of AglST2 were comparable with those of AglST1, which had been previously purified and characterized from S. thermodiastaticus HF3-3 previously. The N-terminal amino acid sequence of AglST2 showed a good agreement with that of AglST1, suggesting that AglST1 was generated from AglST2 by proteolysis during cultivation. MALDI-TOF mass analysis suggested that AglST1 might be generated from AglST2 by the proteolytic removal of C-terminus polypeptide (approximately 20 kDa). Our investigation thus revealed the properties of AglST2, such as tolerance against high temperature, salts, and surfactants, which have promising industrial applications.
Subject(s)
Glucans/metabolism , Glycoside Hydrolases/physiology , Streptomyces/enzymology , Amino Acid Sequence , Enzyme Stability , Glycoside Hydrolases/isolation & purification , Glycoside Hydrolases/metabolism , Hot Temperature , Hydrogen-Ion Concentration , Hydrolysis , Industrial Microbiology , Metals , Molecular Weight , Sodium Chloride , Substrate Specificity , Surface-Active AgentsABSTRACT
α-1,3-Glucanase hydrolyzes α-1,3-glucan, an insoluble linear α-1,3-linked homopolymer of glucose that is found in the extracellular polysaccharides produced by oral streptococci in dental plaque and in fungal cell walls. This enzyme could be of application in dental care and the development of fungal cell-wall lytic enzymes, but its three-dimensional structure has not been available to date. In this study, the recombinant catalytic domain of α-1,3-glucanase FH1 from Paenibacillus glycanilyticus FH11, which is classified into glycoside hydrolase family 87, was prepared using a Brevibacillus choshinensis expression system and purified in a soluble form. Crystals of the purified protein were produced by the sitting-drop vapor-diffusion method. Diffraction data were collected to a resolution of 1.6â Å using synchrotron radiation. The crystals obtained belonged to the tetragonal space group P41212 or P43212, with unit-cell parameters a = b = 132.6, c = 76.1â Å. The space group and unit-cell parameters suggest that there is one molecule in the asymmetric unit.
Subject(s)
Brevibacillus/enzymology , Catalytic Domain/physiology , Gene Expression Regulation, Bacterial , Gene Expression Regulation, Enzymologic , Glycoside Hydrolases/biosynthesis , Paenibacillus/enzymology , Amino Acid Sequence , Brevibacillus/chemistry , Brevibacillus/genetics , Crystallography, X-Ray/methods , Glucans/biosynthesis , Glucans/genetics , Glycoside Hydrolases/genetics , Paenibacillus/chemistry , Paenibacillus/geneticsABSTRACT
α-1,3-Glucanase (Agl-KA) of Bacillus circulans KA-304 consists of an N-terminal discoidin domain (DS1), a carbohydrate binding module family 6 (CBM6), threonine and proline repeats (TP), a second discoidin domain (DS2), an uncharacterized conserved domain (UCD), and a C-terminal catalytic domain. Previously, we reported that DS1, CBM6, and DS2 have α-1,3-glucan-binding activity and contribute to α-1,3-glucan hydrolysis. In this study, UCD deletion mutant (AglΔUCD) was constructed, and its properties were compared with those of Agl-KA. α-1,3-Glucan hydrolyzing, α-1,3-glucan binding, and protoplast-forming activities of AglΔUCD were almost the same as those of Agl-KA. kcat/Km values of AgΔUCD and Agl-KA were 11.4 and 11.1 s-1 mg-1 mL, respectively. AglΔUCD and Agl-KA exhibited similar characteristics, such as optimal pH, pH stability, optimal temperature, and thermostability. These results suggest that UCD is not α-1,3-glucan-binding and flexible linker domain, and that deletion of UCD does not affect the affinity of N-terminal binding domains and the catalytic action of the C-terminal domain. Subsequently, heterologous UCenzyme productivity of AglΔD in Escherichia coli was compared with that of Agl-KA. The productivity of AglΔUCD was about 4-fold larger than that of Agl-KA after an 8-h induction at 30°C. In the case of induction at 20°C, the productivity of AglΔUCD was also larger than that of Agl-KA. These findings indicate that deletion of only UCD enhances the enzyme productivity in E. coli.
Subject(s)
Bacillus/enzymology , Bacterial Proteins/chemistry , Escherichia coli/enzymology , Escherichia coli/genetics , Glycoside Hydrolases/chemistry , Bacterial Proteins/genetics , Cloning, Molecular , Glucans/metabolism , Glycoside Hydrolases/genetics , Hydrolysis , Kinetics , Protein Domains , Sequence DeletionABSTRACT
Chitinase 1 (Chi1) is an acidic and thermostable hydrolytic enzyme capable of the breakdown of chitin, a resilient biopolymer that is the primary building block of fungi cell walls and marine exoskeletons. In this study, Chi1 was purified from the bacterium Streptomyces thermodiastaticus HF 3-3, and its properties were carefully characterized. The molecular mass of Chi1 was estimated to be approximately 46 kDa and, through sequencing, its N-terminal amino acid sequence was identified as ADSGKVKL. Although the optimal operating temperature and pH for Chi1 were determined to be 65°C and pH 5.5, respectively, the purified enzyme was stable over wide pH (1.5-9) and temperature ranges. Moreover, Chi1 retained 87% of its activity in the presence of 15% NaCl. While Chi1 activity was inhibited by Ag+ and Mn2+, other chemicals tested had no significant effect on its enzymatic activity. The Km and Vmax values of Chi1 for the substrate colloidal chitin were 1.23 ± 0.7 mg/mL and 6.33 ± 1.0 U/mg, respectively. Thin-layer chromatography analysis of the enzymatic reaction end products mainly detected diacetylchitobiose. We also cloned the Chi1 gene and purified the recombinant protein; the properties of the recombinant enzyme were nearly identical to those of the native enzyme. Therefore, Chi1 purified from S. thermodiastaticus HF 3-3 is unique, as it is highly stable under broad range of pH values, temperatures, and chemical exposures. Combined, these properties make this enzyme attractive for use in the industrial bioconversion of chitin.