Automated, High-Throughput Screening of Hybrid Elastin-like Polypeptide/Polysaccharide Multilayer Film Deposition.

The self-assembled layer-by-layer technique has attracted a great deal of attention as a method for engineering bio-functional surfaces under mild chemical conditions. The production of multilayer films, starting from newly designed building blocks, may be laborious, considering the inherent limitations for anticipating how minimal changes in the macromolecular composition may impact both film deposition and performance. This paper presents an automated, high-throughput approach to depositing polyelectrolyte multilayers (PEMs) in multiwell plates, enabling the screening of nearly 100 film formulations in the same process. This high-throughput layer-by-layer (HT-LbL) method runs in an affordable, fully commercial platform using Python-coded routines that can be easily adapted for the materials science lab settings. The HT-LbL system was validated by investigating the deposition of polysaccharide-based films in multiwell plates, probing the absorbance signal of ionically stained polyelectrolyte multilayers (PEMs) prepared in one single batch. The HT-LbL method was also used to investigate the deposition of PEMs with a small library of genetically engineered elastin-like polypeptides (ELPs) with different levels of ionizable and hydrophobic amino acid residues. The deposition of ELP/chitosan films was assessed based on the signal of fluorescently labeled species (chitosan or ELP-mCherry), demonstrating that both electrostatic and hydrophobic residues are essential for film buildup. The growth and surface properties of ELP-mCherry/chitosan films also seemed susceptible to the assembly pH, forming a higher film growth and a rougher and more hydrophobic surface for both polyelectrolytes deposited under a low ionization degree. Overall, this study illustrates the challenge of predicting the growth and properties of multilayer films and how the HT-LbL can accelerate the development of multilayer films that demand high levels of testing and optimization.

Amino acid-functionalized chitosan beads for in vitro copper ions uptake in the presence of histidine.

One of the hallmarks of Alzheimer's Disease (AD) is the anomalous binding involving amyloid-ß (Aß) peptide and metal ions, such as copper, formed through histidine (His) residues. Herein, adsorption experiments were performed to test the in vitro ability of chitosan to uptake copper ions in the presence of histidine. The characterization of the beads was assessed before and after the adsorption process by scanning electron microscope, X-ray diffraction and Fourier-transform infrared spectroscopy. Amino acid functionalization of chitosan-based beads promoted an increase in the copper ions adsorption capacity (2.47 mmol of Cu(II)/gram of adsorbent). Nevertheless, depending on the order of addition of histidine to the system, different adsorption behaviors were observed. The kinetics showed that, once the Cu(II)-His bond was established, functionalized beads were less efficient to capture Cu(II), which promoted a decrease in the overall adsorption capacity. However, when chitosan and histidine were simultaneously added to the Cu(II) solution, there was no decrease in adsorption capacity. To sum up, chitosan-based materials are an interesting model to provide a better understanding on the biomolecules­copper interactions that occur in AD, as well as a possible chelating agent that can interfere in the bonds between Aß residues and copper ions.

Probing axial metal distribution on biopolymer-based layer-by-layer films for antimicrobial use.

This study presents the axial molar composition of polysaccharide-based polyelectrolyte multilayer (PEM) films loaded with silver ions for antimicrobial applications. Individual polymers (chitosan, hyaluronan or alginate) and silver composition were determined using X-Ray Photoelectron Spectroscopy coupled with C60+ cluster ion sputtering technique, while the influence of silver loading on film topography was assessed using Atomic Force Microscopy. Despite the use of the layer-by-layer approach for film assembly, these PEM films present a non-stratified, nanoblend-like, polymer composition, with a nearly uniform metal distribution over the axial direction. Results also show surface antimicrobial activity towards Staphylococcus aureus bacteria and Candida albicans fungi over 20 h for hyaluronan/chitosan PEM, which is associated with its higher silver loading capacity. The interplay of bulk film composition and surface properties may provide valuable insights for engineering advanced materials with controlled spatio-temporal behavior.

Interplay of the Assembly Conditions on Drug Transport Mechanisms in Polyelectrolyte Multilayer Films.

The layer-by-layer film deposition is a suitable strategy for the design and functionalization of drug carriers with superior performance, which still lacks information describing the influence of assembly conditions on the mechanisms governing the drug release process. Herein, traditional poly(acrylic acid)/poly(allylamine) polyelectrolyte multilayers (PEM) were explored as a platform to study the influence of the assembly conditions such as pH, drug loading method, and capping layer deposition on the mechanisms that control the release of calcein, the chosen model drug, from PEM. Films with 20-40 bilayers were assembled at pH 4.5 or 8.8, and the drug loading process was carried out during- or post-film assembly. Release data were fitted to three release models, namely, Higuchi, Ritger-Peppas, and Berens-Hopfenberg, to investigate the mechanism governing the drug transport, such as the apparent diffusion and the relaxation time. The postassembly drug loading method leads to a higher drug loading capacity than the during-assembly method, attributed to the washing out of calcein during film assembly steps in the latter method. Higuchi's and Ritger-Peppas' model analyses indicate that the release kinetic constant increased with the number of bilayers for the postassembly method. The opposite trend is observed for the during-assembly method. The Berens-Hopfenberg release model enabled the decoupling of each drug transport mechanism's contribution, indicating the increase of the diffusion contribution with the number of bilayers for the postassembly method at pH 4.5 and the increase of the polymer relaxation contribution for the during-assembly method at pH 8.8. Deborah's number, which represents the ratio of the polymer relaxation time to the diffusion time, follows the trends observed for the relaxation contribution for the conditions investigated. The deposition of the capping phospholipid layer over the payload also favored the polymer relaxation contribution in the drug release, featuring new strategies to investigate the drug release in PEM.

Tracking Sulfonated Polystyrene Diffusion in a Chitosan/Carboxymethyl Cellulose Layer-by-Layer Film: Exploring the Internal Architecture of Nanocoatings.

Since chitosan presents the ability to interact with a wide range of molecules, it has been one of the most popular natural polymers for the construction of layer-by-layer thin films. In this study, depth-profiling X-ray photoelectron spectroscopy (XPS) was employed to track the diffusion of sulfonated polystyrene (SPS) in carboxymethyl cellulose/chitosan (CMC/Chi) multilayers. Our findings suggest that the CMC/Chi film does not constitute an electrostatic barrier sufficient to block diffusion of SPS, and that diffusion can be controlled by adjusting the diffusion time and the molecular weight of the polymers that compose the CMC/Chi system. In addition to monitoring the diffusion, it was also possible to observe a process of preferential interaction between Chi and SPS. Thus, the nitrogen N 1s peak, due to functional groups found exclusively in chitosan chains, was the key factor to identifying the molecular interactions involving chitosan and the different polyanions. Accordingly, the presence of a strong polyanion such as SPS shifts the N 1s peak to a higher level of binding energy. Such results highlight that understanding the fundamentals of polymer interactions is a major step to fine-tuning the internal architecture of LbL structures for specific applications (e.g., drug release).

Copper Ion Uptake by Chitosan in the Presence of Amyloid-ß and Histidine.

Alzheimer's disease (AD) is related to the anomalous binding that occurs between amyloid-ß peptide (Aß) and copper ion, through imidazole ring of histidine (His), as stated in the literature. It is also known that high-affinity metal ion chelators can be pharmacologically used as a possible therapeutic approach. In this work, we tested the ability "in vitro" of chitosan (Chi) to reduce Aß aggregation and Thioflavin T binding assay indicated that chitosan has affinity for Aß and interferes in its aggregation. We also tested the ability of Chi to uptake copper ions in the presence of Aß or His. Equilibrium data reveals that chitosan acted as an effective chelating agent competing with Aß and histidine for copper binding. The addition of histidine or Aß in the system promotes an unfolding of chitosan chains, as verified by small-angle X-ray scattering. Extended X-ray absorption fine structure and XPS spectra show that new copper interactions with groups containing nitrogen in the presence of histidine may occur. These results can help understanding fundamental chemical interactions among species detected in AD and biopolymers, opening up possibilities for new treatment approaches for this disease.

Investigation of the Internal Chemical Composition of Chitosan-Based LbL Films by Depth-Profiling X-ray Photoelectron Spectroscopy (XPS) Analysis.

Chitosan-based thin films were assembled using the layer-by-layer technique, and the axial composition was accessed using X-ray photoelectron spectroscopy with depth profiling. Chitosan (CHI) samples possessing different degrees of acetylation ([Formula: see text]) and molecular weight ([Formula: see text]) produced via the ultrasound-assisted deacetylation reaction were used in this study along with two different polyanions, namely, sodium polystyrenesulfonate (PSS) and carboxymethylcellulose (CMC). When chitosan, a positively charged polymer in aqueous acid medium, was combined with a strong polyanion (PSS), the total positive charge of chitosan, directly related to its [Formula: see text], was the key factor affecting the film formation. However, for CMC/CHI films, the pH of the medium and [Formula: see text] of chitosan strongly affected the film structure and composition. Consequently, the structure and the axial composition of chitosan-based films can be finely adjusted by choosing the polyanion and defining the chitosan to be used according to its DA and [Formula: see text] for the desired application, as demonstrated by the antibacterial tests.

Roughness dynamic in surface growth: Layer-by-layer thin films of carboxymethyl cellulose/chitosan for biomedical applications.

Surfaces are responsible for important interactions of biomaterials since they create the interface with the biological environment and affect the response that the body will have to the material. Surface roughness and morphology have great impact on the material performance, affecting cell, bacterial, and biomolecular adhesion. Thin films of chitosan and carboxymethyl cellulose were produced by layer-by-layer deposition at different pH values and had their surface growth process studied throughout roughness measurements. Both polymers are nontoxic and biocompatible to the human biological system, with biomedical applications from tissue engineering to drug delivery. Growth exponents are presented, and it is suggested that fractal-based growth models are suitable for describing surface evolution and morphology of carboxymethyl cellulose/chitosan layer-by-layer thin film growth during deposition, primarily nonlinear models.

Nanofilms of hyaluronan/chitosan assembled layer-by-layer: An antibacterial surface for Xylella fastidiosa.

In this work, nanofilms of hyaluronan/chitosan (HA/CHI) assembled layer by layer were synthesized; their application as a potential antimicrobial material was demonstrated for the phytopathogen Xylella fastidiosa, a gram-negative bacterium, here used as a model. For the synthesis, the influence of pH and ionic strength of these natural polymer stem-solutions on final characteristics of the HA/CHI nanofilms was studied in detail. The antibacterial effect was evaluated using widefield fluorescence microscopy. These results were correlated with the chemical properties of the nanofilms, studied by FTIR and Raman spectroscopy, as well as with their morphology and surface properties characterized using SEM and AFM. The present findings can be extended to design and optimize HA/CHI nanofilms with enhanced antimicrobial behavior for other type of phytopathogenic gram-negative bacteria species, such as Xanthomonas citri, Xanthomas campestri and Ralstonia solanacearum.

Removal of glyphosate herbicide from water using biopolymer membranes.

Enormous amounts of pesticides are manufactured and used worldwide, some of which reach soils and aquatic systems. Glyphosate is a non-selective herbicide that is effective against all types of weeds and has been used for many years. It can therefore be found as a contaminant in water, and procedures are required for its removal. This work investigates the use of biopolymeric membranes prepared with chitosan (CS), alginate (AG), and a chitosan/alginate combination (CS/AG) for the adsorption of glyphosate present in water samples. The adsorption of glyphosate by the different membranes was investigated using the pseudo-first order and pseudo-second order kinetic models, as well as the Langmuir and Freundlich isotherm models. The membranes were characterized regarding membrane solubility, swelling, mechanical, chemical and morphological properties. The results of kinetics experiments showed that adsorption equilibrium was reached within 4 h and that the CS membrane presented the best adsorption (10.88 mg of glyphosate/g of membrane), followed by the CS/AG bilayer (8.70 mg of glyphosate/g of membrane). The AG membrane did not show any adsorption capacity for this herbicide. The pseudo-second order model provided good fits to the glyphosate adsorption data on CS and CS/AG membranes, with high correlation coefficient values. Glyphosate adsorption by the membranes could be fitted by the Freundlich isotherm model. There was a high affinity between glyphosate and the CS membrane and moderate affinity in the case of the CS/AG membrane. Physico-chemical characterization of the membranes showed low values of solubility in water, indicating that the membranes are stable and not soluble in water. The SEM and AFM analysis showed evidence of the presence of glyphosate on CS membranes and on chitosan face on CS/AG membranes. The results showed that the glyphosate herbicide can be adsorbed by chitosan membranes and the proposed membrane-based methodology was successfully used to treat a water sample contaminated with glyphosate. Biopolymer membranes therefore potentially offer a versatile method to eliminate agricultural chemicals from water supplies.