Chiral Tetrakis Eu(III) Complexes with Ammonium Cations for Improved Circularly Polarized Luminescence.

Large dissymmetry factor of the circularly polarized luminescence (gCPL) was observed in ligand and coordination tuned chiral tetrakis europium (Eu(III)) complexes with ammonium cations. The gCPL value was estimated to be -1.54, which is the largest among chiral luminescent molecules. Through photophysical measurements, single crystal X-ray structural analyses and quantum chemical calculations, changes in the geometric and electronic structures were observed for a series of chiral tetrakis Eu(III) complexes which enhanced the gCPL value. The emission quantum yield and photosensitized energy transfer efficiencies of chiral Eu(III) complexes with ammonium cations were also larger than that with previous Cs+. Based on the systematic modifications and analyses for chiral tetrakis Eu(III) complex, effect of the ammonium cation on enhanced CPL brightness is reported.

An encompassed representation of timescale hierarchies in first-order reaction network.

Complex networks are pervasive in various fields such as chemistry, biology, and sociology. In chemistry, first-order reaction networks are represented by a set of first-order differential equations, which can be constructed from the underlying energy landscape. However, as the number of nodes increases, it becomes more challenging to understand complex kinetics across different timescales. Hence, how to construct an interpretable, coarse-graining scheme that preserves the underlying timescales of overall reactions is of crucial importance. Here, we develop a scheme to capture the underlying hierarchical subsets of nodes, and a series of coarse-grained (reduced-dimensional) rate equations between the subsets as a function of time resolution from the original reaction network. Each of the coarse-grained representations guarantees to preserve the underlying slow characteristic timescales in the original network. The crux is the construction of a lumping scheme incorporating a similarity measure in deciphering the underlying timescale hierarchy, which does not rely on the assumption of equilibrium. As an illustrative example, we apply the scheme to four-state Markovian models and Claisen rearrangement of allyl vinyl ether (AVE), and demonstrate that the reduced-dimensional representation accurately reproduces not only the slowest but also the faster timescales of overall reactions although other reduction schemes based on equilibrium assumption well reproduce the slowest timescale but fail to reproduce the second-to-fourth slowest timescales with the same accuracy. Our scheme can be applied not only to the reaction networks but also to networks in other fields, which helps us encompass their hierarchical structures of the complex kinetics over timescales.

Advanced theoretical design of light-driven molecular rotary motors: enhancing thermal helix inversion and visible-light activation.

In this study, we have advanced the field of light-driven molecular rotary motors (LDMRMs) by achieving two pivotal goals: lowering the thermal helix inversion (THI) barrier and extending the absorption wavelength into the visible spectrum. This study involves the structural reengineering of a second-generation visible LDMRM, resulting in the synthesis of a novel class, specifically, 2-((2S)-5-methoxy-2-methyl-2,3-dihydro-1H-cyclopenta[a]naphthalen-1-yl)-3-oxo-2,3-dihydro-1H-dibenzo[e,g]indole-6,9-dicarbonitrile. This redesigned motor stands out with its two photoisomerization stages and two thermal helix inversions, featuring exceptionally low THI barriers (4.00 and 2.05 kcal mol-1 at the OM2/MRCI level for the EM → EP and ZM → ZP processes, respectively). Moreover, it displays absorption wavelengths in the visible light range (482.98 and 465.76 nm for the EP and ZP isomers, respectively, at the TD-PBE0-D3/6-31G(d,p) level), surpassing its predecessors in efficiency, as indicated by the narrow HOMO-LUMO energy gap. Ultrafast photoisomerization kinetics (approximately 0.8-1.6 ps) and high quantum yields (around 0.3-0.6) were observed through trajectory surface hopping simulations. Additionally, the simulated time-resolved fluorescence emission spectrum indicates a significantly reduced "dark state" duration (0.09-0.26 ps) in these newly designed LDMRMs compared to the original ones, marking a substantial leap forward in the design and efficiency of LDMRMs.

Guest-Responsive Near-Infrared-Luminescent Metal-Organic Cage Organized by Porphyrin Dyes and Yb(III) Complexes.

Metal-organic cages (MOCs) with luminophores have significant advantages for the facile detection of specific molecules based on turn-on or turn-off luminescence changes induced by host-guest complexation. One important challenge is the development of turn-on-type near-infrared (NIR)-luminescent MOCs. In this study, we synthesized a novel MOC consisting of two porphyrin dyes linked by four Yb(III) complexes, which exhibit bimodal red and NIR fluorescence signals upon photoexcitation of the porphyrin π system. Single-crystal X-ray structural analysis and computational molecular modeling revealed that planar aromatic perfluorocarbons were intercalated into the MOC. The tight packing between the MOC and guests enhanced the NIR fluorescence of Yb(III) by suppressing energy transfer from the photoexcited porphyrin to oxygen molecules. Guest-responsive turn-on NIR fluorescence changes in an MOC were successfully demonstrated.

Singlet fission initiating organic photosensitizations.

The feasibility of singlet fission (SF) in organic photosensitizers is investigated through spin-flip long-range corrected time-dependent density functional theory. This study focuses on four major organic photosensitizer molecules: benzophenone, boron-dipyrromethene, methylene blue, and rose bengal. Calculations demonstrate that all these molecules possess moderate [Formula: see text]-stacking energies and closely-lying singlet (S) and quintet (triplet-triplet, TT) excitations, satisfying the essential conditions for SF: (1) Near-degenerate low-lying S and (TT) excitations with a significant S-T energy gap, and (2) Moderate [Formula: see text]-stacking energy of chromophores, slightly higher than solvation energy, enabling dissociation for triplet-state chromophore generation. Moreover, based on the El-Sayed rule, intersystem crossing is found to simultaneously proceed at very slow rates in all these photosensitizers. This is attributed to the fact that the lowest singlet excitation of the monomers partly involves [Formula: see text] transitions alongside the main [Formula: see text] transitions. The proposed mechanisms are strongly substantiated by comparisons with experimental studies.

Defect passivation in methylammonium/bromine free inverted perovskite solar cells using charge-modulated molecular bonding.

Molecular passivation is a prominent approach for improving the performance and operation stability of halide perovskite solar cells (HPSCs). Herein, we reveal discernible effects of diammonium molecules with either an aryl or alkyl core onto Methylammonium-free perovskites. Piperazine dihydriodide (PZDI), characterized by an alkyl core-electron cloud-rich-NH terminal, proves effective in mitigating surface and bulk defects and modifying surface chemistry or interfacial energy band, ultimately leading to improved carrier extraction. Benefiting from superior PZDI passivation, the device achieves an impressive efficiency of 23.17% (area ~1 cm2) (low open circuit voltage deficit ~0.327 V) along with superior operational stability. We achieve a certified efficiency of ~21.47% (area ~1.024 cm2) for inverted HPSC. PZDI strengthens adhesion to the perovskite via -NH2I and Mulliken charge distribution. Device analysis corroborates that stronger bonding interaction attenuates the defect densities and suppresses ion migration. This work underscores the crucial role of bifunctional molecules with stronger surface adsorption in defect mitigation, setting the stage for the design of charge-regulated molecular passivation to enhance the performance and stability of HPSC.

Theoretical Design and Synthesis of Caged Compounds Using X-Ray-Triggered Azo Bond Cleavage.

Caged compounds are frequently used in life science research. However, the light used to activate them is commonly absorbed and scattered by biological materials, limiting their use to basic research in cells or small animals. In contrast, hard X-rays exhibit high bio-permeability due to the difficulty of interacting with biological molecules. With the main goal of developing X-ray activatable caged compounds, azo compounds are designed and synthesized with a positive charge and long π-conjugated system to increase the reaction efficiency with hydrated electrons. The azo bonds in the designed compounds are selectively cleaved by X-ray, and the fluorescent substance Diethyl Rhodamine is released. Based on the results of experiments and quantum chemical calculations, azo bond cleavage is assumed to occur via a two-step process: a two-electron reduction of the azo bond followed by N─N bond cleavage. Cellular experiments also demonstrate that the azo bonds can be cleaved intracellularly. Thus, caged compounds that can be activated by an azo bond cleavage reaction promoted by X-ray are successfully generated.

Ultrafast Raman observation of the perpendicular intermediate phantom state of stilbene photoisomerization.

Trans-cis photoisomerization is generally described by a model in which the reaction proceeds via a common intermediate having a perpendicular conformation around the rotating bond, irrespective of from which isomer the reaction starts. Nevertheless, such an intermediate has yet to be identified unambiguously, and it is often called the 'phantom' state. Here we present the structural identification of the common, perpendicular intermediate of stilbene photoisomerization using ultrafast Raman spectroscopy. Our results reveal ultrafast birth and decay of an identical, short-lived transient that exhibits a vibrational signature characteristic of the perpendicular state upon photoexcitation of the trans and cis forms. In combination with ab initio molecular dynamics simulations, it is shown that the photoexcited trans and cis forms are funnelled off to the ground state through the same, perpendicular intermediate.

Ab initio molecular dynamics study of intersystem crossing dynamics for MH2 (M = Si, Ge, Sn, Pb) on spin-pure and spin-mixed potential energy surfaces.

Recently, surface-hopping ab initio molecular dynamics (SH-AIMD) simulations have come to be used to discuss the mechanisms and dynamics of excited-state chemical reactions, including internal conversion and intersystem crossing. In dynamics simulations involving intersystem crossing, there are two potential energy surfaces (PESs) governing the motion of nuclei: PES in a spin-pure state and PES in a spin-mixed state. The former gives wrong results for molecular systems with large spin-orbit coupling (SOC), while the latter requires a potential gradient that includes a change in SOC at each point, making the computational cost very high. In this study, we systematically investigate the extent to which the magnitude of SOC affects the results of the spin-pure state-based dynamics simulations for the hydride MH2 (M = Si, Ge, Sn, Pb) by performing SH-AIMD simulations based on spin-pure and spin-mixed states. It is clearly shown that spin-mixed state PESs are indispensable for the dynamics simulation of intersystem crossing in systems containing elements Sn and Pb from the fifth period onward. Furthermore, in addition to the widely used Tully's fewest switches (TFS) algorithm, the Zhu-Nakamura (ZN) global switching algorithm, which is computationally less expensive, is applied to SH for comparison. The results from TFS- and ZN-SH-AIMD methods are in qualitative agreement, suggesting that the less expensive ZN-SH-AIMD can be successfully utilized to investigate the dynamics of photochemical reactions based on quantum chemical calculations.

A Steric-Repulsion-Driven Clutch Stack of Triaryltriazines: Correlated Molecular Rotations and a Thermoresponsive Gearshift in the Crystalline Solid.

We report that a newly developed type of triaryltriazine rotor, which bears bulky silyl moieties on the para position of its peripheral phenylene groups, forms a columnar stacked clutch structure in the crystalline phase. The phenylene units of the crystalline rotors display two different and interconvertible correlated molecular motions. It is possible to switch between these intermolecular geared rotational motions via a thermally induced crystal-to-crystal phase transition. Variable-temperature solid-state 2H NMR measurements and X-ray diffraction studies revealed that the crystalline rotor is characterized by a vertically stacked columnar structure upon introducing a bulky Si moiety with bent geometry as the stator. The structure exhibits correlated flapping motions via a combination of 85° and ca. 95° rotations between 295 and 348 K, concurrent with a negative entropy change (ΔS‡ = -23 ± 0.3 cal mol-1 K-1). Interestingly, heating the crystal beyond 348 K induces an anisotropic expansion of the column and lowers the steric congestion between the adjacent rotators, thus altering the correlated motions from a flapping motion to a correlated 2-fold 180° rotation with a lower entropic penalty (ΔS‡ = -14 ± 0.5 cal mol-1 K-1). The obtained results of our study suggest that the intermolecular stacking of the C3-symmetric rotator driven by the steric repulsion of the bulky stator represents a promising strategy for producing various correlated molecular motions in the crystalline phase. Moreover, direct and reversible modulation of the intermolecularly correlated rotation is achieved via a thermally induced crystal-to-crystal phase transition, which operates as a gearshift function at the molecular level.

On-Surface Synthesis of Multiple Cu Atom-Bridged Organometallic Oligomers.

A metal-metal bond between coordination complexes has the nature of a covalent bond in hydrocarbons. While bimetallic and trimetallic compounds usually have three-dimensional structures in solution, the high directionality and robustness of the bond can be applied for on-surface syntheses. Here, we present a systematic formation of complex organometallic oligomers on Cu(111) through sequential ring opening of 11,11,12,12-tetraphenyl-1,4,5,8-tetraazaanthraquinodimethane and bonding of phenanthroline derivatives by multiple Cu atoms. A detailed characterization with a combination of scanning tunneling microscopy and density functional theory calculations revealed the role of the Cu adatoms in both enantiomers of the chiral oligomers. Furthermore, we found sufficient strength of the bonds against sliding friction by manipulating the oligomers up to a hexamer. This finding may help to increase the variety of organometallic nanostructures on surfaces.

Roles of Singlet Fission in the Photosensitization of Silicon Phthalocyanine.

The roles of singlet fission in the triplet generation of silicon phthalocyanine (SiPc), a compound analogous to the IRDye700DX photosensitizer used in near-infrared photoimmunotherapy, are investigated by considering the energetical relation between the excitations of this compound. These excitations are obtained through spin-flip long-range corrected time-dependent density functional theory calculations. To initiate singlet fission, chromophores must meet two conditions: (1) near-degenerate low-lying singlet and quintet (triplet-triplet) excitations with a considerable energy gap of the lowest singlet and triplet excited states and (2) moderate π-stacking energy of chromophores, which is higher than but not far from the solvation energy, to facilitate the dissociation and generation of triplet-state chromophores. The present calculations demonstrate that SiPc satisfies both of these conditions after the formation of π-stacking irrespective of the presence of an axial ligand(s), suggesting that singlet fission plays a crucial role in the triplet generation process, although intersystem crossing occurs simultaneously at a very slow rate.

Total and orbital density-based analyses of molecules revealing long-range interaction regions.

Total and orbital electron densities of molecules are explored for the effect of the long-range correction (LC) for density functional theory (DFT) exchange functionals by comparing to the effect of the ab initio coupled cluster singles and doubles (CCSD) method. Calculating the LC effect on the total electron densities shows that the LC stabilizes the electrons around the long-range interaction regions of kinetic energy density, which are assumed to be electrons other than free electrons and self-interacting electrons, while the CCSD method stabilizes the electrons in the long-range interaction regions in the vertical molecular planes. As a more precise test, the LC effect on orbital densities are compared to the CCSD effect on Dyson orbital densities. Surprisingly, these effects are similar for the unoccupied orbitals, indicating that the LC covers the effects required to reproduce the CCSD Dyson unoccupied orbitals. For exploring the discrepancies between these effects on the occupied orbitals, the photoionization cross sections are calculated as a direct test for the shapes of the HOMOs to investigate the differences between these effects on the occupied orbitals. Consequently, the LC clearly produces the canonical HOMOs close to the CCSD Dyson and experimental ones, except for the HOMO of benzene molecule that mixes with the HOMO - 1 for the CCSD Dyson orbitals. This indicates that the orbital analyses using the photoionization cross sections are available as a direct test for the quality of DFT functionals.

Reproducing the Reaction Route Map on the Shape Space from Its Quotient by the Complete Nuclear Permutation-Inversion Group.

This study develops an algorithm to reproduce reaction route maps (RRMs) in the shape space from the outputs of potential search algorithms. To demonstrate the algorithm, global reaction route mapping is utilized as a potential search algorithm, but the proposed algorithm should work with other potential search algorithms in principle. The proposed algorithm does not require any encoding of the molecular configurations and is thus applicable to complicated realistic molecules for which efficient encoding is not readily available. We show that subgraphs of an RRM mapped to each other by the action of the symmetry group are isomorphic and also provide an algorithm to compute the set of feasible transformations in the sense of Longuet-Higgins. We demonstrate the proposed algorithm in toy models and in more realistic molecules. Finally, we remark on absolute rate theory from our perspective.

Characterizing Reaction Route Map of Realistic Molecular Reactions Based on Weight Rank Clique Filtration of Persistent Homology.

A reaction route map (RRM) constructed using the GRRM program is a collection of elementary reaction pathways, each of which comprises two equilibrium (EQ) geometries and one transition state (TS) geometry connected by an intrinsic reaction coordinate (IRC). An RRM can be mathematically represented by a graph with weights assigned to both vertices, corresponding to EQs, and edges, corresponding to TSs, representing the corresponding energies. In this study, we propose a method to extract topological descriptors of a weighted graph representing an RRM based on persistent homology (PH). The work of Mirth et al. [ J. Chem. Phys. 2021, 154, 114114], in which PH analysis was applied to the (3N - 6)-dimensional potential energy surface of an N atomic system, is related to the present method, but our method is practically applicable to realistic molecular reactions. Numerical assessments revealed that our method can extract the same information as the method proposed by Mirth et al. for the 0-th and 1-st PHs, except for the death of the 1-st PH. In addition, the information obtained from the 0-th PH corresponds to the analysis using the disconnectivity graph. The results of this study suggest that the descriptors obtained using the proposed method accurately reflect the characteristics of the chemical reactions and/or physicochemical properties of the system.

Designing main-group catalysts for low-temperature methane combustion by ozone.

The catalytic combustion of methane at a low temperature is becoming increasingly key to controlling unburned CH4 emissions from natural gas vehicles and power plants, although the low activity of benchmark platinum-group-metal catalysts hinders its broad application. Based on automated reaction route mapping, we explore main-group elements catalysts containing Si and Al for low-temperature CH4 combustion with ozone. Computational screening of the active site predicts that strong Brønsted acid sites are promising for methane combustion. We experimentally demonstrate that catalysts containing strong Bronsted acid sites exhibit improved CH4 conversion at 250 °C, correlating with the theoretical predictions. The main-group catalyst (proton-type beta zeolite) delivered a reaction rate that is 442 times higher than that of a benchmark catalyst (5 wt% Pd-loaded Al2O3) at 190 °C and exhibits higher tolerance to steam and SO2. Our strategy demonstrates the rational design of earth-abundant catalysts based on automated reaction route mapping.

Computational survey of humin formation from 5-(hydroxymethyl)furfural under basic conditions.

A comprehensive reaction-path search for the oligomerization of 5-(hydroxymethyl)furfural (HMF) based on quantum chemical calculations was conducted to clarify the mechanism of humin formation in the oxidation of HMF to furan-2,5-dicarboxylic acid (FDCA), in which humin is a typical macromolecular byproduct. The present procedure repeatedly utilizes the multi-component artificial-force-induced reaction (MC-AFIR) method to investigate multistep oligomerization reactions. Although humin formation has been reported even in reagent-grade HMFs with 97-99% purity during their storage at low temperatures, no direct addition path of two HMFs with <185 kJ mol-1 barrier has been found, suggesting humin formation is caused by a reaction with impurities. Based on the reaction conditions, we considered the reactions of HMF + H2O, HMF + OH-, and HMF + O2 and identified three reaction paths with <65 kJ mol-1 barrier for the reaction of HMF + OH-. Further, the suppression of humin formation by the acetal protection of HMF is computationally confirmed.

Dimetal-Binding Scaffold 2-(Pyridin-2-yl)imidazo [1,5-b]pyridazine-7-ylidene: Synthesis of Trinuclear Heterobimetallic Complexes Involving Gold-Metal Interactions.

As a dimetal-binding rigid scaffold, 2-(pyridin-2-yl)imidazo[1,5-b]pyridazine-7-ylidene was introduced. The scaffold was first converted into a meridional Au,N,N-tridentate ligand through binding of a Au(I)Cl moiety at the carbene center. The Au(I) center and the N,N-chelating moiety were expected to function as metallophilic and 4e-σ-donative interaction sites, respectively, in the binding of the second metal center. In this manner, various trinuclear heterobimetallic complexes were synthesized with different 3d-metal sources, such as cationic CuI , CuII , NiII , and CoII salts. SC-XRD analysis showed that the mono-3d-metal di-gold(I) trinuclear heterobimetallic complexes were constructed through gold(I)-metal interactions. Metallophilic interactions were also investigated by quantum chemical calculations including the AIM and IGMH methods.

Ab initio calculations on structure and stability of BN/CC isosterism in azulene.

Herein, we investigated the thermodynamic stability and opto-electronic properties of a newly BN-doped azulene. The gas-phase formation enthalpies of 11 BN-doped azulene were calculated by the atomization energy method using three computational models (CBS-APNO, CBS-QB3, and G3MP2). The results suggest that AZ-1N9B exhibits the highest stability among the studied isomers. On the other hand, AZ-1B9N and AZ-9B10N display nearly equal stability with relative energies of 19.36 and 19.82 kcal/mol at CBS-QB3, respectively. These two isomers are considered the least stable among the investigated compounds. The frontier molecular orbitals (FMO), ionization energies (IE), and electron affinities (EA) of these isomers were discussed. Additionally, the electronic absorption spectra of the BN-doped azulenes were computed using the TD-B3LYP/6-31 + G(d,p) and TD-CAM-B3LYP level of theories, which using a long-range corrected hybrid functional in acetone. The computational results obtained in this research are align closely with the existing literature, thereby reinforcing the credibility and reliability of our findings.

Size dependent electrocatalytic activities of h-BN for oxygen reduction reaction to water.

Electrocatalytic activities for the oxygen reduction reaction (ORR) of Au electrodes modified by as prepared and size selected (0.45-1.0, 0.22-0.45, and 0.1-0.22 µm) h-BN nanosheet (BNNS), which is an insulator, were examined in O2 saturated 0.5M H2SO4 solution. The overpotential was reduced by all the BNNS modifications, and the smaller the size, the smaller the overpotential for ORR, i.e., the larger the ORR activity, in this size range. The overpotential was reduced by as much as ∼330 mV compared to a bare Au electrode by modifying the Au surface by the BNNS of the smallest size range (0.1-0.22 µm). The overpotential at this electrode was only 80 mV more than that at the Pt electrode. Both the rotation disk electrode experiments with Koutecky-Levich analysis and rotating ring disk electrode measurements showed that more than 80% of oxygen is reduced to water via the four-electron process at this electrode. These results strongly suggest and theoretical density functional theory calculations support that the ORR active sites are located at the edges of BNNS islands adsorbed on Au(111). The decrease in size of BNNS islands results in an effective increase in the number of the catalytically active sites and, hence, in the increase in the catalytic activity of the BNNS/Au(111) system for ORR.