Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 3 de 3
Filter
Add more filters











Database
Language
Publication year range
1.
RSC Adv ; 14(7): 4645-4652, 2024 Jan 31.
Article in English | MEDLINE | ID: mdl-38318625

ABSTRACT

Composite nanofiltration (NF) membranes prepared using interfacial polymerization (IP) have gained significant attention in the field of wastewater treatment. In this study, sodium camphor sulfonate (CSA-Na) and tetraethylammonium chloride (TEAC) were employed as aqueous phase additives to regulate the diffusion of piperazine (PIP) molecules through electrostatic interactions. The dissociated CSA-Na and TEAC in the aqueous solution formed an organic structure at a certain concentration, restricting the interfacial transport behavior of PIP monomers. The results show that when the content of CSA-Na is 2% w/v, TEAC is 3.9% w/v, that is, the material dosage ratio is 1 : 3, and the NF membrane shows the best performance, with a water flux of 55.61 L m-2 h-1 (test pressure is 0.5 MPa), and MgSO4 rejection rate of more than 98%.

2.
RSC Adv ; 13(32): 22113-22121, 2023 Jul 19.
Article in English | MEDLINE | ID: mdl-37492516

ABSTRACT

A series of thin film composite (TFC) membranes was prepared with piperazine (PIP) and m-phenylenediamine (MPD) in different ratios, and the magnesium-lithium separation performance of TFC membranes in salt-lake brine with the magnesium-lithium ratio of 28 were systematically compared. The prepared TFC membranes exhibited high rejection of magnesium ions and negative rejection of lithium ions with high water flux, enabling high magnesium-lithium separation efficiency. The characterisation using FTIR spectroscopy, XPS, zeta potential measurements, and SEM techniques indicated that the composition and surface morphology of the membrane prepared with dual aqueous monomers were found to be different from those prepared with single aqueous monomers under the similar conditions. The interfacial polymerization process of different monomers and the structure-performance mechanism of TFC membranes were further discussed.

3.
RSC Adv ; 10(27): 16168-16178, 2020 Apr 21.
Article in English | MEDLINE | ID: mdl-35493633

ABSTRACT

Thin-film composite (TFC) nanofiltration (NF) membranes were fabricated via the co-deposition of taurine, tannic acid (TA), and polyethyleneimine (PEI), followed by subsequent interfacial polymerization with trimesoyl chloride (TMC) on the surface of the polysulfone ultrafiltration substrates. The surface properties, including the roughness, hydrophilicity, surface potential, and NF performances were facilely tuned by varying the taurine content for the prepared TFC membranes. In addition, the as-prepared TFC NF membranes had an excellent antifouling property and flux recovery ratio (FRR) in humic acid (HA), bovine serum albumin (BSA) and sodium alginate (SA) filtration tests. These results also revealed that the taurine content controlled the formation of the striped surface. Thus, this work provided a viable strategy for fabricating TFC NF membranes with high selectivity and outstanding antifouling ability.

SELECTION OF CITATIONS
SEARCH DETAIL