The natural history and genotype-phenotype correlations of TMPRSS3 hearing loss: an international, multi-center, cohort analysis.

TMPRSS3-related hearing loss presents challenges in correlating genotypic variants with clinical phenotypes due to the small sample sizes of previous studies. We conducted a cross-sectional genomics study coupled with retrospective clinical phenotype analysis on 127 individuals. These individuals were from 16 academic medical centers across 6 countries. Key findings revealed 47 unique TMPRSS3 variants with significant differences in hearing thresholds between those with missense variants versus those with loss-of-function genotypes. The hearing loss progression rate for the DFNB8 subtype was 0.3 dB/year. Post-cochlear implantation, an average word recognition score of 76% was observed. Of the 51 individuals with two missense variants, 10 had DFNB10 with profound hearing loss. These 10 all had at least one of 4 TMPRSS3 variants predicted by computational modeling to be damaging to TMPRSS3 structure and function. To our knowledge, this is the largest study of TMPRSS3 genotype-phenotype correlations. We find significant differences in hearing thresholds, hearing loss progression, and age of presentation, by TMPRSS3 genotype and protein domain affected. Most individuals with TMPRSS3 variants perform well on speech recognition tests after cochlear implant, however increased age at implant is associated with worse outcomes. These findings provide insight for genetic counseling and the on-going design of novel therapeutic approaches.

Unconventional PDZ Recognition Revealed in α7 nAChR-PICK1 Complexes.

PDZ domains are modular domains that conventionally bind to C terminal or internal motifs of target proteins to control cellular functions through the regulation of protein complex assemblies. Almost all reported structures of PDZ-target protein complexes rely on fragments or peptides as target proteins. No intact target protein complexed with PDZ was structurally characterized. In this study, we used NMR spectroscopy and other biochemistry and biophysics tools to uncover insights into structural coupling between the PDZ domain of protein interacting with C-kinase 1 (PICK1) and α7 nicotinic acetylcholine receptors (α7 nAChR). Notably, the intracellular domains of both α7 nAChR and PICK1 PDZ exhibit a high degree of plasticity in their coupling. Specifically, the MA helix of α7 nAChR interacts with residues lining the canonical binding site of the PICK1 PDZ, while flexible loops also engage in protein-protein interactions. Both hydrophobic and electrostatic interactions mediate the coupling. Overall, the resulting structure of the α7 nAChR-PICK1 complex reveals an unconventional PDZ binding mode, significantly expanding the repertoire of functionally important PDZ interactions.

Augmented reality system based on the integration of polarization-independent metalens and micro-LEDs.

Augmented reality (AR), a technology that superimposes virtual information onto a user's direct view of real-world scenes, is considered one of the next-generation display technologies and has been attracting considerable attention. Here, we propose a flat optic AR system that synergistically integrates a polarization-independent metalens with micro light-emitting diodes (LEDs). A key component is a meticulously designed metalens with a numerical aperture of 0.25, providing a simulated focusing efficiency of approximately 76.5% at a wavelength of 532 nm. Furthermore, the laser measurement system substantiates that the fabricated metalens achieves a focusing efficiency of 70.8%. By exploiting the reversibility of light characteristics, the metalens transforms the divergent light from green micro-LEDs into a collimated beam that passes through the pupil and images on the retina. Monochromatic pixels with a size of 5×5 µm2 and a pitch of 10 µm can be distinctly resolved with a power efficiency of 50%. This work illustrates the feasibility of integrating the metalens with microdisplays, realizing a high-efficiency AR device without the need for additional optical components and showcasing great potential for the development of near-eye display applications.

The CXCR4 might be a potential biomarker for esophageal squamous cell carcinoma: A meta-analysis.

OBJECTIVE: To evaluate the relationship between CXCL12/CXCR4 and the progress, prognosis of esophageal squamous cell carcinoma (ESCC), providing evidence for potential early diagnosis, clinical treatment, prognosis evaluation, and therapeutic target of ESCC. METHODS: Databases of PubMed, the Cochrane Library, Embase, and Web of Science were searched for the relationship between CXCL12/CXCR4 and clinicopathological characteristics and survival time of ESCC. Stata16.0 software was used to conduct meta-analysis. RESULTS: A total of 10 studies involving 1216 cases of patients with ESCC were included in our study. The results indicated that high-level expression of CXCR4 was significantly correlated with tumor differentiation [OR = 0.69, 95% confidence interval (CI): (0.50, 0.97)], tumor infiltration [OR = 0.39, 95% CI: (0.25, 0.61)], lymph node metastasis [OR = 0.36, 95% CI: (0.21, 0.61)], clinical stage [OR = 0.33, 95% CI: (0.24, 0.45)] of ESCC. The expression of CXCR4 was also significantly correlated with OS [HR = 2.00, 95% CI: (1.63, 2.45)] and disease-free survival [HR = 1.76, 95% CI: (1.44, 2.15)] in patients of ESCC after surgical resection. No significant relationship was observed between the expression of CXCL12 and the clinicopathological characteristics of ESCC. CONCLUSION: CXCR4 might be a potential biomarker for the progress and prognosis evaluation, and therapeutic target for ESCC.

Study on the lignin-derived sp2-sp3 hybrid hard carbon materials and the feasibility for industrial production.

Hard carbon has been widely used in anode of lithium/sodium ion battery, electrode of supercapacitor, and carbon molecular sieve for CO2 capture and hydrogen storage. In this study the lignin derived hard carbon products are investigated, and the conclusions are abstracted as follows. (1) The lignin derived hard carbon products consist of microcrystal units of sp2 graphene fragments, jointed by sp3 carbon atoms and forming sp2-sp3 hybrid hard carbon family. (2) From the lignin precursors to the sp2-sp3 hybrid hard carbon products, most carbon atoms retain their original electron configurations (sp2 or sp3) and keep their composition in lignin. (3) The architectures of lignin-derived hard carbon materials are closely dependent on the forms of their lignin precursors, and could be preformed by different pretreatment techniques. (4) The carbonization of lignin precursors follows the mechanism "carbonization in situ and recombination nearby". (5) Due to the high carbon ratio and abundant active functional groups in lignin, new activation techniques could be developed for control of pore size and pore volume. In general lignin is an excellent raw material for sp2-sp3 hybrid hard carbon products, a green and sustainable alternative resource for phenolic resin, and industrial production for lignin derived hard carbon products would be feasible.

Competitive Coordination of Sodium Ions for High-Voltage Sodium Metal Batteries with Fast Reaction Speed.

The unstable electrode-electrolyte interface and the narrow electrochemical window of normal electrolytes hinder the potential application of high-voltage sodium metal batteries. These problems are actually related to the solvation structure of the electrolyte, which is determined by the competition between cations coordinated with anions or solvent molecules. Herein, we design an electrolyte incorporating ethyl (2,2,2-trifluoroethyl) carbonate and fluoroethylene carbonate, which facilitates a pronounced level of cation-anion coordination within the solvation sheath by enthalpy changes to reduce the overall coordination of cation-solvents and increase sensitivity to salt concentration. Such an electrolyte regulated by competitive coordination leads to highly reversible sodium plating/stripping with extended cycle life and a high Coulombic efficiency of 98.0%, which is the highest reported so far in Na||Cu cells with ester-based electrolytes. Moreover, 4.5 V high-voltage Na||Na3V2(PO4)2F3 cells exhibit a high rate capability up to 20 C and an impressive cycling stability with an 87.1% capacity retention after 250 cycles with limited Na. The proposed strategy of solvation structure modification by regulating the competitive coordination of the cation provides a new direction to achieve stable sodium metal batteries with high energy density and can be further extended to other battery systems by controlling enthalpy changes of the solvation structure.

[Immune Reconstitution after BTKi Treatment in Chronic Lymphocytic Leukemia].

OBJECTIVE: To analyze the immune reconstitution after BTKi treatment in patients with chronic lymphocytic leukemia (CLL). METHODS: The clinical and laboratorial data of 59 CLL patients admitted from January 2017 to March 2022 in Fujian Medical University Union Hospital were collected and analyzed retrospectively. RESULTS: The median age of 59 CLL patients was 60.5(36-78). After one year of BTKi treatment, the CLL clones (CD5 +/CD19 +) of 51 cases (86.4%) were significantly reduced, in which the number of cloned-B cells decreased significantly from (46±6.1)×109/L to (2.3±0.4)×109/L (P =0.0013). But there was no significant change in the number of non-cloned B cells (CD19 + minus CD5 +/CD19 +). After BTKi treatment, IgA increased significantly from (0.75±0.09)g/L to (1.31±0.1)g/L (P <0.001), while IgG and IgM decreased from (8.1±0.2)g/L and (0.52±0.6)g/L to (7.1±0.1)g/L and (0.47±0.1)g/L, respectively (P <0.001, P =0.002). BTKi treatment resulted in a significant change in T cell subpopulation of CLL patients, which manifested as both a decrease in total number of T cells from (2.1±0.1)×109/L to (1.6±0.4)×109/L and NK/T cells from (0.11±0.1)×109/L to (0.07±0.01)×109/L (P =0.042, P =0.038), both an increase in number of CD4 + cells from (0.15±6.1)×109/L to (0.19±0.4)×109/L and CD8 + cells from (0.27±0.01)×109/L to (0.41±0.08)×109/L (both P <0.001). BTKi treatment also up-regulated the expression of interleukin (IL)-2 while down-regulated IL-4 and interferon (IFN)-γ. However, the expression of IL-6, IL-10, and tumor necrosis factor (TNF)-α did not change significantly. BTKi treatment could also restored the diversity of TCR and BCR in CLL patients, especially obviously in those patients with complete remission (CR) than those with partial remission (PR). Before and after BTKi treatment, Shannon index of TCR in patients with CR was 0.02±0.008 and 0.14±0.001 (P <0.001), while in patients with PR was 0.01±0.03 and 0.05±0.02 (P >0.05), respectively. Shannon index of BCR in patients with CR was 0.19±0.003 and 0.33±0.15 (P <0.001), while in patients with PR was 0.15±0.009 and 0.23±0.18 (P <0.05), respectively. CONCLUSIONS: BTKi treatment can shrink the clone size in CLL patients, promote the expression of IgA, increase the number of functional T cells, and regulate the secretion of cytokines such as IL-2, IL-4, and IFN-γ. BTKi also promote the recovery of diversity of TCR and BCR. BTKi treatment contributes to the reconstitution of immune function in CLL patients.

Biomechanical Research of Three Parallel Cannulated Compression Screws in Oblique Triangle Configuration for Fixation of Femoral Neck Unstable Fractures.

OBJECTIVE: Surgical treatment with internal fixation, specifically percutaneous fixation with three cannulated compression screws (CCSs), is the preferred choice for young and middle-aged patients. The mechanical advantage of the optimal spatial configuration with three screws provides maximum dispersion and cortical support. We suspect that the spatial proportion of the oblique triangle configuration (OTC) in the cross-section of the femoral neck isthmus (FNI) may significantly improve shear and fatigue resistance of the fixed structure, thereby stabilizing the internal fixation system in femoral neck fracture (FNF). This study aims to explore the mechanical features of OTC and provide a mechanical basis for its clinical application. METHODS: Twenty Sawbone femurs were prepared as Pauwels type III FNF models and divided equally into two fixation groups: OTC and inverted equilateral triangle configuration (IETC). Three 7.3 mm diameter cannulated compression screws (CCSs) were used for fixation. The specimens of FNF after screw internal fixation were subjected to static loading and cyclic loading tests, respectively, with five specimens for each test. Axial stiffness, 5 mm failure load, ultimate load, shear displacement, and frontal rotational angle of two fragments were evaluated. In the cyclic loading test, the load sizes were 700 N, 1400 N, and 2100 N, respectively, and the fracture end displacement was recorded. Results were presented as means ± SD. Data with normal distributions were compared by the Student's t test. RESULTS: In the static loading test, the axial stiffness, ultimate load, shear displacement, and frontal rotational angle of two fragments were (738.64 vs. 620.74) N/mm, (2957.61 vs. 2643.06) N, (4.67 vs. 5.39) mm, and (4.01 vs. 5.52)° (p < 0.05), respectively. Comparison between the femoral head displacement after 10,000 cycles of 700N cyclic loading and total displacement after 20,000 cycles of 700-1400N cyclic loading showed the OTC group was less than the IETC group (p < 0.05). A comparison of femoral head displacement after 10,000 cycles of 1400N and 2100N cycles and total displacement after 30,000 cycles of 700-2100N cycles showed the OTC group was less than another group, but the difference was not significant (p > 0.05). CONCLUSION: When three CCSs are inserted in parallel to fix FNF, the OTC of three screws has obvious biomechanical advantages, especially in shear resistance and early postoperative weight-bearing, which provides a mechanical basis for clinical selection of ideal spatial configuration for unstable FNF.

Spatially Selective Solvation Structure by Electronegative Micro-Arrays for Stable Lithium-Metal Anode Interface.

For electrolytes with conventional lithium salt concentration, it is not easy to generate sufficient anion-derived beneficial inorganic components to stabilize the electrolyte-lithium metal anode interface due to the repulsion of the free-state anions by the anode. In this study, the above issues are solved through the strong interaction between electronegative materials and lithium ions (Li+ ). A locally high Li+ concentration strategy is proposed by preparing micro-arrays of electronegative nano-hydroxyapatite (nHA) on the Cu foil. It is found that the oxygen atoms in the phosphate group (-PO4 ) of the nHA can strongly adsorb Li+ to form a locally Li+ -rich region, which increases the probability of anions interacting with Li+ . The formation of more Li+ -coordinated anions at the electrolyte-anode interface can reduce the Li+ de-solvation energy barrier, and enable the anions to completely decompose into lithium fluoride (LiF) and lithium nitride (Li3 N) on the Li metal anode. The interfacial transfer dynamics is accelerated and the Li dendrites are effectively suppressed. Under high current density, the anode exhibits a long lifespan with high Coulombic efficiency and small polarization voltage. The nHA micro-arrays achieve the targeted solvation structure at the electrolyte-anode interface while ensuring conventional lithium salt concentration in the bulk electrolyte.

Effectiveness of a multicomponent activity and horticultural intervention for the hospitalized older adults: A randomized controlled trial: Effectiveness of Intervention for the Hospitalized Older Adults.

This study evaluated the effectiveness of different intervention programs in improving function among hospitalized older individuals using the Comprehensive Geriatric Assessment (CGA). A randomized controlled trial consisted of three groups: routine care, horticulture, and multicomponent activities (n = 32 each). Horticultural and multicomponent activity interventions showed beneficial effects on the CGA in hospitalized older individuals, particularly regarding cognitive function and quality-of-life. Additionally, horticultural activities significantly contributed to the perception of older adults' health status. We recommend to select older patients in geriatric wards with long-term hospitalization and adjust the frequency of activities or choose a single intervention program to provide long-term and effective intervention effects.

[Application prospect of reaction engineering approach in studying drying behavior of single droplet during spray drying of traditional Chinese medicine].

Spray drying technology is one of the most commonly used unit operations in the production of traditional Chinese medicine(TCM) preparations, offering advantages such as short drying time and uniform product quality. However, due to the properties of TCM extracts, such as high viscosity, strong hygroscopicity, and poor flowability, there is limited scope to solve the problems of wall adhesion and clumping in spray drying from the macroscopic perspective of pharmaceutical production. Therefore, it has become a trend to study and optimize the spray drying process from the microscopic point of view by investigating single droplet evaporation behavior. Based on the reaction engineering approach(REA), the single droplet drying system, as a novel method for studying droplets, collects parameter data on individual TCM droplets during the drying process and uses the REA to process the data and establish predictive models. This approach is crucial for understanding the mechanism of TCM spray drying. This paper summarized and analyzed the cha-racteristics of various single droplet systems, the application of REA in single droplet drying systems, and its significance in optimizing the process, predicting drying states, and shortening the development cycle in the field of TCM spray drying, and looked ahead to the prospects of this method, including the introduction of new parameters and imaging techniques, aiming to provide a reference for further research in the field of TCM spray drying.

Study on the microcrystal cellulose and the derived 2D graphene and relative carbon materials.

Microcrystal cellulose (MCC) is a green and sustainable resource that widely exists in various lignocellulose species in percentage 10% to 30%. The fine powder of MCC is often discarded in industrial productions that use lignocellulose as feedstock. The crystal structure of two types of MCC (sugarcane pith and bamboo pith) and their derived carbon materials are studied, and the key findings are summarized as follows. (1) In the MCC refined from sugarcane pith, there are large amount of cellulose 2D crystal, which can be converted to valuable 2D graphene crystal. (2) In the MCC refined from bamboo pith there are large amount of cluster microcrystal cellulose, which can be converted to soft and elastic graphene microcrystal (GMC). (3) The 2D cellulose in MCC of sugarcane pith has large surface area and is easily to be degraded to sugars by acid-base hydrolysis reaction, which can be carbonized to Fullerenes-like carbon spheres. (4) The crystal structures of MCC derived carbon materials are strongly impacted by the crystal structures of MCC, and the carbonization reaction of MCC follows "in situ carbonization" and "nearby recombination" mechanism. In general, the results from this study may open a new way for value-added applications of microcrystal cellulose.

Prediction of lithium-ion battery SOC based on the fusion of MHA and ConvolGRU.

If the charging state of the lithium-ion battery can be accurately predicted, overcharge and overdischarge of the battery can be avoided, and the service life of the battery can be improved. In order to improve the prediction accuracy of SOC, a prediction method combined with convolutional layer, multi-head attention mechanism and gated cycle unit is proposed to extract data feature information from different dimensions of space and time. Using the data set of the University of Maryland, we simulated the battery in real vehicle operating conditions at different temperatures (0 °C, 25 °C, 45 °C). The test results showed that the mean absolute error, root mean square error and maximum prediction error of the model were 0.53%, 0.67% and 0.4% respectively. The results show that the model can predict SOC accurately. At the same time, the comparison with other prediction models shows that the prediction accuracy of this model is the highest.

Association between the occurrence of buccally displaced canine and palatal and craniofacial morphology in adolescents.

The main objective of the present research study is to evaluate the association between the occurrence of buccally displaced canine (BDC) and the palatal as well as the craniofacial morphology in adolescents in accordance at the early permanent dentition. As the experimental group, 100 adolescents of Chinese ethnicity (mean age 13.05 years) with crowding and buccally displaced canine (BDC-c) were selected in comparison with the same number of candidates (mean age 12.59 years) without BDC and crowding as control group. Digital dental casts and cephalograms were collected for three dimensional (3D) and cephalometric measurements. An independent sample T-test was used to compare the cephalometric values between the two groups. Logistic regression as commonly statistical methods used in empirical study including categorical dependent variables was used to identify the joint effects of the dental variables' 3D measurements. When comparing the groups with above analysis, patients with BDC showed a statistically significant narrower and higher palatal vault. For the cephalometric variables, the anterior cranial base length, sagittal position of the maxilla (SNA), sagittal position of the mandible (SNB), and skeletal relationship between maxilla and mandible (ANB) appeared to be smaller, whilst palatal plane angle (SN-PP), Frankfort-mandibular plane angle (FMA), anterior facial height, and lower facial height were larger in BDC-c control group (p < 0.05). A smaller inter-first premolar width was significant in the prediction model (p = 0.002). This study highlights that BDC-c participants in early permanent dentition exhibited a narrower dental arch and higher palatal vault, of which a smaller inter-first premolar width would significantly increase the occurrence of BDC.

Technological process optimization and measurement of image quality of the electrically bifocal metalens.

This Letter describes the design procedure and process optimization of the electrically bifocal metalens. In our design, horizontal and vertical polarization is manipulated by applying a suitable voltage to a twisted nematic liquid crystal (TN-LC) cell. Each nanostructure is designed to be a rectangular prism, making different polarizations of light experience various phase delays, thus causing bi-focus. We selected lithographical methods to fabricate our metalens because of the minimum physical size, which can be as small as 50 nm, and the maximum aspect ratio, which is as high as 15. Furthermore, to increase the tolerance and make the sidewall vertical and smooth, we coated different characteristics of photoresist sensitivity to the upper and lower layers. After the development, the mushroom-type photoresist makes Ni easier to strip while in the lift-off process, thus increasing the quality of the whole metalens. Our experiment shows that the focal lengths and focusing efficiencies corresponding to the two polarizations are similar to the simulation results. The proposed electrically modulated bifocal metalens can be utilized in different applications and combined with other optical components.

Identification of cuticular protein genes and analysis of their roles in phosphine resistance of the rusty grain beetle Cryptolestes ferrugineus.

The rusty grain beetle, Cryptolestes ferrugineus (Stephens) is one of the most economically important stored grain pests, and it has evolved the high resistance to phosphine. Cuticular proteins (CPs) are the major structural components of insect cuticle, and previous studies have confirmed that CPs were involved in insecticide resistance. However, the CPs of C. ferrugineus are still poorly characterized, and thus we conducted transcriptome-wide identification of CP genes and analyze their possible relationships with phosphine resistance in this pest. In this study, a total of 122 putative CPs were annotated in the C. ferrugineus transcriptome data by blasting with the known CPs of Tribolium castaneum. The analysis of conserved motifs revealed these CPs of C. ferrugineus belonging to 9 different families, including 87 CPR, 13 CPAP1, 7 CPAP3, 3 Tweedle, 1 CPLCA, 1 CPLCG, 5 CPLCP, 2 CPCFC, and 3 CPFL proteins. The further phylogenetic analysis showed the different evolutionary patterns of CPs. Namely, we found some CPs (CPR family) formed species-specific protein clusters, indicating these CPs might occur independently among insect taxa, and while some other CPs (CPAP1 and CPAP3 family) shared a closer correlation based on the architecture of protein domains. Subsequently, the previous RNA-seq data were applied to establish the expression profiles of CPs in a phosphine susceptible and resistant populations of C. ferrugineus, and a large amount of CP genes were found to be over-expressed in resistant insects. Lastly, an up-regulated CP gene (CPR family) was selected for the further functional analysis, and after this gene was silenced via RNA interference (RNAi), the sensitivity to phosphine was significantly enhanced in C. ferrugineus. In conclusion, the present results provided us an overview of C. ferrugineus CPs, and which suggested that the CPs might play the critical roles in phosphine resistance.

The impact of end-stage kidney disease on mortality in patients after acute myocardial infarction: A nationwide study.

BACKGROUND: This study aimed to evaluate the impact of end-stage kidney disease (ESKD) on mortality in patients with first-time acute myocardial infarction (AMI). METHODS: This was a retrospective nationwide cohort study. Patients diagnosed with first-time AMI between January 1, 2000, and December 31, 2012, were included. All patients were followed-up until death or December 31, 2012, whichever occurred first. A one-to-one propensity score matching technique was used to match patients with ESKD to those without ESKD of similar sex, age, comorbidities, and coronary intervention (including percutaneous coronary intervention [PCI] and coronary artery bypass grafting [CABG]). Kaplan-Meier cumulative survival curves were constructed to compare AMI patients with and without ESKD. RESULTS: A total of 186 112 patients were enrolled and 8056 patients with ESKD were identified. Propensity score matched 8056 patients without ESKD were included in the comparison. Overall, the 12-year mortality rate was significantly higher in patients with ESKD than in those without ESKD (log-rank p < 0.0001), including the sex, age, and PCI and CABG subgroups. In Cox proportional-hazard regression analysis, ESKD was an independent risk factor for mortality after patients suffered from first-time AMI (hazard ratio, 1.77; 95% CI, 1.70-1.84; p < 0.0001). A forest plot for subgroup analysis revealed that in AMI patients, ESKD had a higher impact on mortality in male; younger age; without comorbidities such as hypertension, diabetes mellitus, peripheral vascular disease, heart failure, cerebrovascular accident, and chronic obstructive pulmonary disease; and receiving PCI and CABG subgroups. CONCLUSION: ESKD significantly increases the mortality risk in patients with first-time AMI, including both sexes, different ages, and whether PCI or CABG was performed. In patients with AMI, ESKD has a high impact on mortality in male, younger age, without comorbidities, and those undergoing PCI and CABG.

Assembling phenyl-modified colloidal silica on graphene oxide towards ethanol redispersible graphene oxide powder.

Recently, ethanol has shown promising potential in the large-scale reduction of graphene oxide (GO) into graphene. However, dispersion of GO powder in ethanol is a challenge due to its poor affinity, which hinders permeation and intercalation of ethanol between GO molecule layers. In this paper, phenyl-modified colloidal silica nanospheres (PSNS) were synthesized by phenyl-tri-ethoxy-silane (PTES) and tetra-ethyl ortho-silicate (TEOS) using a sol-gel method. PSNS was then assembled onto a GO surface to form a PSNS@GO structure by possible non-covalent π-π stacking interactions between the phenyl groups and GO molecules. The surface morphology, chemical composition, and dispersion stability were analyzed by scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetry, Raman spectroscopy, X-ray diffractometry, nuclear magnetic resonance, and particle sedimentation test. The results showed that the as-assembled PSNS@GO suspension had excellent dispersion stability with an optimal PSNS concentration of 5 vol% PTES. With the optimized PSNS@GO, ethanol can permeate between the GO layers and intercalate along with PSNS particles via formation of hydrogen bonds between assembled PSNS on GO and ethanol, achieving a stable dispersion of GO in ethanol. The optimized PSNS@GO powder remained redispersible after drying and milling according to this interaction mechanism which is favorable for large scale reduction processes. Higher PTES concentration may result in agglomeration of PSNS and formation of wrapping structures of PSNS@GO after drying and worsen its dispersion capability.

[Current research status and application prospect of numerical simulation in traditional Chinese medicine drying].

With the rapid development of computer technology, numerical simulation has gradually become an important method to study drying process and improve drying equipment. Using computer to simulate the drying process of traditional Chinese medicine(TCM) is characterized by intuitiveness, scientificity, and low cost, which serves as an auxiliary means for technical innovation in TCM drying. This paper summarizes the theories of different drying methods and the research status of numerical simulation in drying, introduces the modeling methods and software of numerical simulation, and expounds the significance of numerical simulation modeling in shortening the research and development cycle, improving drying equipment, and optimizing drying parameters. However, the current numerical simulation method for drying process has problems, such as low accuracy, lack of quantitative indicators for the control of simulation results on the process, and insufficient in-depth research on the mechanism of drug quality changes. Furthermore, this paper put forward the application prospect of numerical simulation in TCM drying, providing reference for the further study of numerical simulation in this field.