ABSTRACT
The structure and surface-interface instability of LiCoO2 thin-film electrodes during charge-discharge cycles are one of the main factors leading to the deterioration of electrochemical performance. Element doping and surface coating are effective strategies to tackle this issue. In this work, Al-doped and in situ Al2O3-coated LiCoO2 composite thin-film electrodes are prepared by magnetron sputtering. The results show that the resultant composite thin-film electrodes exhibited excellent cycling stability, with a discharge specific capacity of 40.2 µAh um-1 cm-2 after 240 cycles at 2.5 µA cm-2, with a capacity retention rate of 94.14%, compared to a discharge capacity of the unmodified sample of only 37.7 µAh um-1 cm-2 after 110 cycles, with a capacity retention rate of 80.04%. In addition, the rate performance of the prepared LiCoO2 film is significantly improved, and the discharge specific capacity of the Al-doped sample reaches 43.5 µAh um-1 cm-2 at 100 µA cm-2, which is 38.97% higher than that of the unmodified sample (31.3 µAh um-1 cm-2). The enhancement of electrochemical performance is mainly attributed to the synergistic effect of Al doping and in situ Al2O3 coating. The metal Al forms a conductive network in the film, while part of the Al will enter the LiCoO2 lattice to form a LiAl y Co1-y O2 solid solution, promoting the transport of lithium ions and improving the stability of the electrode structure. The in situ continuous deposition of the coating optimizes the active material coating-electrolyte interface.