One-pot Synthesis and Photophysical Studies of Α-cycloamino-substituted 5-aryl-2,2'-bipyridines.

A series of α-cycloamine substituted 2,2'-bipyridines 3ae'-3ce' was obtained via the one-pot approach based on ipso-substitution of a cyano-group in 1,2,4-triazines, followed by aza-Diels-Alder reaction in good yields. Photophysical properties, including fluorosolvatochromism, were studied for 3ae'-3ce' and were compared with α-unsubstituted 2,2'-bipyridines. In addition, dipole moments differences in ground and excited states were calculated by both Lippert-Mataga equation and DFT studies and were compared to each other. The correlation between the size of cycloamine unit and the dipole moments differences value (based on Lippert-Mataga equation) was observed. In addition charge transfer indices (DCT, Λ, H and t) were calculated to demonstrate influence of molecular structure on the intramolecular charge transfer degree.

Polymers and Polymer-Based Materials for the Detection of (Nitro-)explosives.

Methods for the remote detection of warfare agents and explosives have been in high demand in recent times. Among the several detection methods, fluorescence methods appear to be more convenient due to their low cost, simple operation, fast response time, and naked-eye-visible sensory response. For fluorescence methods, a large variety of fluorescent materials, such as small-molecule-based fluorophores, aggregation-induced emission fluorophores/materials, and supramolecular systems, have been reported in the literature. Among them, fluorescent (bio)polymers/(bio)polymer-based materials have gained wide attention due to their excellent mechanical properties and sensory performance, their ability to recognize explosives via different sensing mechanisms and their combinations, and, finally, the so-called amplification of the sensory response. This review provides the most up-to-date data on the utilization of polymers and polymer-based materials for the detection of nitroaromatic compounds (NACs)/nitro-explosives (NEs) in the last decade. The literature data have been arranged depending on the polymer type and/or sensory mechanism.

(1-(4-(5-Phenyl-1,3,4-oxadiazol-2-yl)phenyl)-1H-1,2,3-triazol-4-yl)-methylenyls α,ω-Bisfunctionalized 3- and 4-PEG: Synthesis and Photophysical Studies.

Two new azaheterocycle-based bolas, such as (1-(4-(5-phenyl-1,3,4-oxadiazol-2-yl)phenyl)-1H-1,2,3-triazol-4-yl)-methylenyls α,ω-bisfunctionalized PEGs, were prepared via Cu-catalyzed click reaction between 2-(4-azidophenyl)-5-(aryl)-oxadiazole-1,3,4 and terminal ethynyls derived from PEG-3 and PEG-4. Due to the presence of two heteroaromatic cores and a PEG linker, these bola molecules are considered as promising fluorescent chemosensors for electron-deficient species. As a result of a well-pronounced "turn-off" fluorescence response towards common nitro-explosive components, such as 2,4-dinitrotoluene (DNT) and 2,4,6-trinitrotoluene (TNT), hard-to-detect pentaerythritol tetranitrate (PETN), as well as Hg2+ cation was observed.

Comparison of Photophysical Properties of Lanthanide(III) Complexes of DTTA- or DO3A-Appended Aryl-2,2'-Bipyridines.

New Tb(III) and Eu(III) complexes based on aryl-2,2'-bipyridine ligands with a cyclic DO3A chelating unit appended in the alpha position of the bipyridine core were synthesized. The photophysical properties of these complexes were compared with those of complexes of ligands with identical aryl-2,2'-bipyridine chromophores, but with an acyclic DTTA residue as an additional chelating site in the alpha position of the bipyridine core. The nature of the polyaminocarboxylic acid fragments was found to have a significant influence on the luminescence. For some of the Eu(III) complexes, upon the transition from acyclic DTTA- to the cyclic DO3A-appended ligands, a noticeable increase in the intensity of Eu(III) luminescence was observed, with an increase in the quantum yield of up to 2.55 times. In contrast, for most of the Tb(III) complexes, a similar transition resulted in a noticeable decrease in the luminescence intensity of the Tb(III) cation.

Fluorescent Pyranoindole Congeners: Synthesis and Photophysical Properties of Pyrano[3,2-f], [2,3-g], [2,3-f], and [2,3-e]Indoles.

This paper reports the synthesis of four types of annulated pyranoindole congeners: pyrano[3,2-f]indole, pyrano[2,3-g]indole, pyrano[2,3-f]indole, and pyrano[2,3-e]indole and photophysical studies in this series. The synthesis of pyrano[3,2-f], [2,3-g], and [2,3-e]indoles involve a tandem of Bischler-Möhlau reaction of 3-aminophenol with benzoin to form 6-hydroxy- or 4-hydroxyindole followed by Pechmann condensation of these hydroxyindoles with ß-ketoesters. Pyrano[2,3-f]indoles were synthesized through the Nenitzescu reaction of p-benzoquinone and ethyl aminocrotonates and subsequent Pechmann condensation of the obtained 5-hydroxyindole derivatives. Among the pyranoindoles studied, the most promising were pyrano[3,2-f] and [2,3-g]indoles. These compounds were characterized by moderate to high quantum yields (30-89%) and a large (9000-15,000 cm-1) Stokes shift. More detailed photophysical studies were carried out for a series of the most promising derivatives of pyrano[3,2-f] and [2,3-g]indoles to demonstrate their positive solvatochromism, and the data collected was analyzed using Lippert-Mataga equation. Quantum chemical calculations were performed to deepen the knowledge of the absorption and emission properties of pyrano[3,2-f] and [2,3-g]indoles as well as to explain their unusual geometries and electronic structures.

4-(Aryl)-Benzo[4,5]imidazo[1,2-a]pyrimidine-3-Carbonitrile-Based Fluorophores: Povarov Reaction-Based Synthesis, Photophysical Studies, and DFT Calculations.

A series of novel 4-(aryl)-benzo[4,5]imidazo[1,2-a]pyrimidine-3-carbonitriles were obtained through the Povarov (aza-Diels-Alder) and oxidation reactions, starting from benzimidazole-2-arylimines. Based on the literature data and X-ray diffraction analysis, it was discovered that during the Povarov reaction, [1,3] sigmatropic rearrangement leading to dihydrobenzimidazo[1,2-a]pyrimidines took place. The structures of all the obtained compounds were confirmed based on the data from 1H- and 13C-NMR spectroscopy, IR spectroscopy, and elemental analysis. For all the obtained compounds, their photophysical properties were studied. In all the cases, a positive emission solvatochromism with Stokes shifts from 120 to 180 nm was recorded. Aggregation-Induced Emission (AIE) has been illustrated for compound 6c using different water fractions (fw) in THF. The compounds 6c and 6f demonstrated changes in emission maxima or/and intensities after mechanical stimulation.

Synthesis and Photophysical Properties of α-(N-Biphenyl)-Substituted 2,2'-Bipyridine-Based Push-Pull Fluorophores.

A series of new α-(N-biphenyl)-substituted 2,2'-bipyridines were obtained through the combination of the ipso-nucleophilic aromatic substitution of the C5-cyano group, aza-Diels-Alder and Suzuki cross-coupling reactions, starting from 5-cyano-1,2,4-triazines. For the obtained compounds, photophysical and fluorosolvatochromic properties were studied. Fluorophores 3l and 3b demonstrated unexpected AIEE activity, while 3a and 3h showed promising nitroexplosive detection abilities.

2,7-Diazapyrenes: a brief review on synthetic strategies and application opportunities.

2,7-Diazapyrenes are promising azaaromatic scaffolds with a unique structural geometry and supramolecular properties. This core moiety and its derivatives with some N-methyl cations like N-methyl-2,7,-diazapyrenium, and N,N'-dimethyl-2,7-diazapyrenium attract special attention due to their challenging photophysical properties, especially in the context of interactions with DNA and some of its mononucleotides. This review focuses on the analysis of the main synthetic approaches to 2,7-diazapyrene and its functional derivatives employing various strategies under different reaction conditions. The opportunities of applications of 2,7-diazapyrenes, including their remarkable photophysical and supramolecular properties, DNA-bindings, in sensors, molecular electronics, supramolecular systems, and related areas are also highlighted.

5-Aryl-6-arylthio-2,2'-bipyridine and 6-Arylthio-2,5-diarylpyridine Fluorophores: Pot, Atom, Step Economic (PASE) Synthesis and Photophysical Studies.

A PASE (pot, step, atom, economic) synthetic approach to 5-aryl-6-arylthio-2,2'-bipyridine and 6-arylthio-2,5-diarylpyridine ligands/fluorophores has been reported via SNH in 6-aryl-5H-1,2,4-triazines/aza-Diels-Alder reaction sequence. In this article, the "1,2,4-triazine" methodology was successfully used for the synthesis of C6-thiophenol-substituted (2,2'-bi)pyridines as it is well known that thio-substituted (bi)pyridines and their aza-analogs are of wide practical interest. The photophysical properties of the obtained compounds are studied and compared with those reported earlier for 6-substituted 2,2'-bipyridines. The influence of the nature of substituents in the 6-arylthio(bi)pyridine core on the photophysical properties is discussed. It was observed that the new compounds exhibited promising photophysical properties and could be considered as potential push-pull fluorophores. In addition, they demonstrated greater Stokes shift values compared to the previously described 6-H, 6-arylamino and 6-pentafluoro-2,2'-bipyridines and higher fluorescence quantum yields values compare to pentafluorophenyl-substituted 2,2'-bipyridines. Depending on a nature of (bi)pyridine fluorophore LE (locally excited) and/or ICT (intramolecular charge transfer) state were prevailing in emission spectra.

Computer vision vs. spectrofluorometer-assisted detection of common nitro-explosive components with bola-type PAH-based chemosensors.

Computer vision (CV) algorithms are widely utilized in imaging processing for medical and personal electronics applications. In sensorics CV can provide a great potential to quantitate chemosensors' signals. Here we wish to describe a method for the CV-assisted spectrofluorometer-free detection of common nitro-explosive components, e.g. 2,4-dinitrotoluene (DNT) and 2,4,6-trinitrotoluene (TNT), by using polyaromatic hydrocarbon (PAH, PAH = 1-pyrenyl or 9-anthracenyl) - based bola-type chemosensors. The PAH components of these chemical bolas are able to form stable, bright emissive in a visual wavelength region excimers, which allows their use as extended matrices of the RGB colors after imaging and digital processing. In non-polar solvents, the excimers have poor chemosensing properties, while in aqueous solutions, due to the possible micellar formation, these excimers provide "turn-off" fluorescence detection of DNT and TNT in the sub-nanomolar concentrations. A combination of these PAH-based fluorescent chemosensors with the proposed CV-assisted algorithm offers a fast and convenient approach for on-site, real-time, multi-thread analyte detection without the use of fluorometers. Although we focus on the analysis of nitro-explosives, the presented method is a conceptual work describing a general use of CV for quantitative fluorescence detection of various analytes as a simpler alternative to spectrofluorometer-assisted methods.

Marine biomaterials: Biomimetic and pharmacological potential of cultivated Aplysina aerophoba marine demosponge.

Marine demosponges of the Verongiida order are considered a gold-mine for bioinspired materials science and marine pharmacology. The aim of this work was to simultaneously isolate selected bromotyrosines and unique chitinous structures from A. aerophoba and to propose these molecules and biomaterials for possible application as antibacterial and antitumor compounds and as ready-to-use scaffolds for cultivation of cardiomyocytes, respectively. Among the extracted bromotyrosines, the attention has been focused on aeroplysinin-1 that showed interesting unexpected growth inhibition properties for some Gram-negative clinical multi-resistant bacterial strains, such as A. baumannii and K. pneumoniae, and on aeroplysinin-1 and on isofistularin-3 for their anti-tumorigenic activity. For both compounds, the effects are cell line dependent, with significant growth inhibition activity on the neuroblastoma cell line SH-SY5Y by aeroplysinin-1 and on breast cancer cell line MCF-7 by isofistularin-3. In this study, we also compared the cultivation of human induced pluripotent stem cell-derived cardiomyocytes (iPSC-CMs) on the A. aerophoba chitinous scaffolds, in comparison to chitin structures that were pre-coated with Geltrex™, an extracellular matrix mimetic which is used to enhance iPSC-CM adhesion. The iPSC-CMs on uncoated and pure chitin structures started contracting 24 h after seeding, with comparable behaviour observed on Geltrex-coated cell culture plates, confirming the biocompatibility of the sponge biomaterial with this cell type. The advantage of A. aerophoba is that this source organism does not need to be collected in large quantities to supply the necessary amount for further pre-clinical studies before chemical synthesis of the active compounds will be available. A preliminary analysis of marine sponge bioeconomy as a perspective direction for application of biomaterials and secondary bioactive metabolites has been finally performed for the first time.

Highly luminescent Zn-Cu-In-S/ZnS core/gradient shell quantum dots prepared from indium sulfide by cation exchange for cell labeling and polymer composites.

Gradient core-shell Zn-Cu-In-S/ZnS quantum dots (QDs) of small size and with highly efficient photoluminescence were synthesized via a multi-step high-temperature method involving cation exchange. The procedure starts with the preparation of indium sulfide nanoparticles followed by the addition of Cu and Zn precursors. At this stage, Zn replaces Cu atoms and as a result the concentration of Cu ions in the final QDs is only about 5% of the total In content in a QD. Zn incorporation and the formation of a gradient ZnS shell dramatically increases the photoluminescence quantum yield. Furthermore, the formation of the ZnS shell improves the chemical stability of Cu-In-S QDs, as demonstrated by the preparation of polystyrene-QD composites and labeling of glioma cells. This work provides an effective strategy for obtaining efficient and stable fluorophores free of heavy metals.

An effective and facile synthesis of new blue fluorophores on the basis of an 8-azapurine core.

A convenient synthesis of 2-aryl-2,4-dihydro-5H-[1,2,3]triazolo[4,5-d]pyrimidin-5-ones (DTPs) from 3,3-diamino-2-(arylazo)acrylonitriles through a versatile and readily accessible two-step procedure is described. Density functional theory (DFT) calculations were performed to explain the selectivity of the heterocyclization step, which predominantly afforded 6-amino-5-(arylazo)pyrimidin-2(1H)-thiones in chloroform or ethanol, and 2,3-dihydro-1,2,4-triazines in toluene or DMF. Novel 2-aryl-2,4-dihydro-5H-[1,2,3]triazolo[4,5-d]pyrimidin-5-ones were obtained in good yields and showed absorption in the ultraviolet region and good emission in the blue region. The photophysical properties of DTPs were better than those cited in select literature examples of 8-azapurines. Owing to the facile synthesis and good photophysical characteristics in an aqueous medium, the new DTPs should have potential applications as organic fluorophores in fluorescence imaging and materials science.

Fluorescent Detection of 2,4-DNT and 2,4,6-TNT in Aqueous Media by Using Simple Water-Soluble Pyrene Derivatives.

Pyrene-containing water-soluble probes for the fluorescent detection of nitroaromatic compounds (NACs), such as explosive components (2,4-DNT and 2,4,6-TNT) and herbicides (2,4-dinitrocresol, 2,4-DNOC), in aqueous media are reported. In the probes, the introduction of surface-active hydrophilic "heads" at the periphery of lipophilic (i.e., hydrophobic) pyrene "tails" resulted in the formation of highly fluorescent micelle-like aggregates/pre-associates in aqueous solutions at concentrations of ≤10(-5) m. The enhanced fluorescence quenching of the herein reported architectures is achieved in the presence of ultra-trace amounts of TNT or 2,4-DNT with values of Stern-Volmer quenching constant close to 1×10(5) m(-1) and a detection limit as low as 182 ppb. The most hydrophilic probes demonstrated higher response to 2,4-DNT over TNT. Filter paper test strips impregnated with 1×10(-5) m solutions of the probes were able to detect TNT, 2,4-DNT, and other NACs at levels as low as 50 ppb in water.