Resolving protein-mineral interfacial interactions during in vitro mineralization by atom probe tomography.

Organic macromolecules exert remarkable control over the nucleation and growth of inorganic crystallites during (bio)mineralization, as exemplified during enamel formation where the protein amelogenin regulates the formation of hydroxyapatite (HAP). However, it is poorly understood how fundamental processes at the organic-inorganic interface, such as protein adsorption and/or incorporation into minerals, regulates nucleation and crystal growth due to technical challenges in observing and characterizing mineral-bound organics at high-resolution. Here, atom probe tomography techniques were developed and applied to characterize amelogenin-mineralized HAP particles in vitro, revealing distinct organic-inorganic interfacial structures and processes at the nanoscale. Specifically, visualization of amelogenin across the mineralized particulate demonstrates protein can become entrapped during HAP crystal aggregation and fusion. Identification of protein signatures and structural interpretations were further supported by standards analyses, i.e., defined HAP surfaces with and without amelogenin adsorbed. These findings represent a significant advance in the characterization of interfacial structures and, more so, interpretation of fundamental organic-inorganic processes and mechanisms influencing crystal growth. Ultimately, this approach can be broadly applied to inform how potentially unique and diverse organic-inorganic interactions at different stages regulates the growth and evolution of various biominerals.

Changes in the C-terminal, N-terminal, and histidine regions of amelogenin reveal the role of oligomer quaternary structure on adsorption and hydroxyapatite mineralization.

Adsorption interactions between amelogenin and calcium phosphate minerals are believed to be important to amelogenin's function in enamel formation, however, the role of specific amino acid residues and domains within the protein in controlling adsorption is not well known. We synthesized "mechanistic probes" by systematically removing charged regions of amelogenin in order to elucidate their roles. The probes included amelogenin without the charged residues in the N-terminus (SEKR), without two, three, or eight histidines (H) in the central protein region (H2, H3, H8), or without the C-terminal residues (Delta). In-situ atomic force microscopy (AFM) adsorption studies onto hydroxyapatite (HAP) single crystals confirmed that the C-terminus was the dominant domain in promoting adsorption. We propose that subtle changes in protein-protein interactions for proteins with histidines and N-terminal residues removed resulted in changes in the oligomer quaternary size and structure that also affected protein adsorption. HAP mineralization studies revealed that the oligomer-HAP binding energy and protein layer thickness were factors in controlling the amorphous calcium phosphate (ACP) to HAP induction time. Our studies with mechanistic probes reveal the importance of the oligomer quaternary structure in controlling amelogenin adsorption and HAP mineralization.

Residue-Specific Insights into the Intermolecular Protein-Protein Interfaces Driving Amelogenin Self-Assembly in Solution.

Amelogenin, the dominant organic component (>90%) in the early stages of amelogenesis, orchestrates the mineralization of apatite crystals into enamel. The self-association properties of amelogenin as a function of pH and protein concentration have been suggested to play a central role in this process; however, the large molecular weight of the self-assembled quaternary structures has largely prevented structural studies of the protein in solution under physiological conditions using conventional approaches. Here, using perdeuterated murine amelogenin (0.25 mM, 5 mg/mL) and TROSY-based NMR experiments to improve spectral resolution, we assigned the 1H-15N spectra of murine amelogenin over a pH range (5.5 to 8.0) where amelogenin is reported to exist as oligomers (pH ≤∼6.8) and nanospheres (pH ≥∼7.2). The disappearance or intensity reduction of amide resonances in the 1H-15N HSQC spectra was interpreted to reflect changes in dynamics (intermediate millisecond-to-microsecond motion) and/or heterogenous interfaces of amide nuclei at protein-protein interfaces. The intermolecular interfaces were concentrated toward the N-terminus of amelogenin (L3-G8, V19-G38, L46-Q49, and Q57-L70) at pH 6.6 (oligomers) and at pH 7.2 (nanospheres) including the entire N-terminus up to Q76 and regions distributed through the central hydrophobic region (Q82-Q101, S125-Q139, and F151-Q154). At all pH levels, the C-terminus appeared disordered, highly mobile, and not involved in self-assembly, suggesting nanosphere structures with solvent-exposed C-termini. These findings present unique, residue-specific insights into the intermolecular protein-protein interfaces driving amelogenin quaternary structure formation and suggest that nanospheres in solution predominantly contain disordered, solvent-exposed C-termini.

Controls of nature: Secondary, tertiary, and quaternary structure of the enamel protein amelogenin in solution and on hydroxyapatite.

Amelogenin, a protein critical to enamel formation, is presented as a model for understanding how the structure of biomineralization proteins orchestrate biomineral formation. Amelogenin is the predominant biomineralization protein in the early stages of enamel formation and contributes to the controlled formation of hydroxyapatite (HAP) enamel crystals. The resulting enamel mineral is one of the hardest tissues in the human body and one of the hardest biominerals in nature. Structural studies have been hindered by the lack of techniques to evaluate surface adsorbed proteins and by amelogenin's disposition to self-assemble. Recent advancements in solution and solid state nuclear magnetic resonance (NMR) spectroscopy, atomic force microscopy (AFM), and recombinant isotope labeling strategies are now enabling detailed structural studies. These recent studies, coupled with insights from techniques such as CD and IR spectroscopy and computational methodologies, are contributing to important advancements in our structural understanding of amelogenesis. In this review we focus on recent advances in solution and solid state NMR spectroscopy and in situ AFM that reveal new insights into the secondary, tertiary, and quaternary structure of amelogenin by itself and in contact with HAP. These studies have increased our understanding of the interface between amelogenin and HAP and how amelogenin controls enamel formation.

The energetic basis for hydroxyapatite mineralization by amelogenin variants provides insights into the origin of amelogenesis imperfecta.

Small variations in the primary amino acid sequence of extracellular matrix proteins can have profound effects on the biomineralization of hard tissues. For example, a change in one amino acid within the amelogenin protein can lead to drastic changes in enamel phenotype, resulting in amelogenesis imperfecta, enamel that is defective and easily damaged. Despite the importance of these undesirable phenotypes, there is very little understanding of how single amino acid variation in amelogenins can lead to malformed enamel. Here, we aim to develop a thermodynamic understanding of how protein variants can affect steps of the biomineralization process. High-resolution, in situ atomic force microscopy (AFM) showed that altering one amino acid within the murine amelogenin sequence (natural variants T21 and P41T, and experimental variant P71T) resulted in an increase in the quantity of protein adsorbed onto hydroxyapatite (HAP) and the formation of multiple protein layers. Quantitative analysis of the equilibrium adsorbate amounts revealed that the protein variants had higher oligomer-oligomer binding energies. MMP20 enzyme degradation and HAP mineralization studies showed that the amino acid variants slowed the degradation of amelogenin by MMP20 and inhibited the growth and phase transformation of HAP. We propose that the protein variants cause malformed enamel because they bind excessively to HAP and disrupt the normal HAP growth and enzymatic degradation processes. The in situ methods applied to determine the energetics of molecular level processes are powerful tools toward understanding the mechanisms of biomineralization.

Solid-State NMR Identification of Intermolecular Interactions in Amelogenin Bound to Hydroxyapatite.

Biomineralization processes govern the formation of hierarchical hard tissues such as bone and teeth in living organisms, and mimicking these processes could lead to the design of new materials with specialized properties. However, such advances require structural characterization of the proteins guiding biomineral formation to understand and mimic their impact. In their "active" form, biomineralization proteins are bound to a solid surface, severely limiting our ability to use many conventional structure characterization techniques. Here, solid-state NMR spectroscopy was applied to study the intermolecular interactions of amelogenin, the most abundant protein present during the early stages of enamel formation, in self-assembled oligomers bound to hydroxyapatite. Intermolecular dipolar couplings were identified that support amelogenin dimer formation stabilized by residues toward the C-termini. These dipolar interactions were corroborated by molecular dynamics simulations. A ß-sheet structure was identified in multiple regions of the protein, which is otherwise intrinsically disordered in the absence of hydroxyapatite. To our knowledge, this is the first intermolecular protein-protein interaction reported for a biomineralization protein, representing an advancement in understanding enamel development and a new general strategy toward investigating biomineralization proteins.

Identification of major matrix metalloproteinase-20 proteolytic processing products of murine amelogenin and tyrosine-rich amelogenin peptide using a nuclear magnetic resonance spectroscopy based method.

OBJECTIVE: The aim of this study was to identify major matrix metalloproteinase-20 (MMP20) proteolytic processing products of amelogenin over time and determine if the tyrosine-rich amelogenin peptide (TRAP) was a substrate of MMP20. DESIGN: Recombinant15N-labeled murine amelogenin and 13C,15N-labeled TRAP were incubated with MMP20 under conditions where amelogenin self-assembles into nanospheres. Digestion products were fractionated by reverse-phase high-performance liquid chromatography at various time points. Product identification took advantage of the intrinsic disorder property of amelogenin that results in little change to its fingerprint 1H-15N heteronuclear single-quantum coherence nuclear magnetic resonance spectrum in 2% acetic acid upon removing parts of the protein, allowing cleavage site identification by observing which amide cross peaks disappear. RESULTS: The primary product in five out of the six major reverse-phase high-performance liquid chromatography bands generated after a 24 h incubation of murine amelogenin with MMP20 were: S55-L163, P2-L147, P2-E162, P2-A167, and P2-R176. After 72 h these products were replaced with five major reverse-phase high-performance liquid chromatography bands containing: L46-A170, P2-S152, P2-F151, P2-W45, and short N-terminal peptides. TRAP was completely digested by MMP20 into multiple small peptides with the initial primary site of cleavage between S16 and Y17. CONCLUSIONS: Identification of the major MMP20 proteolytic products of amelogenin confirm a dynamic process, with sites towards the C-terminus more rapidly attacked than sites near the N-terminus. This observation is consistent with nanosphere models where the C-terminus is exposed and the N-terminus more protected. One previously reported end-product of the MMP20 proteolytic processing of amelogenin, TRAP, is shown to be an in vitro substrate for MMP20.

The effect of lysophosphatidic acid using a hydrogel or collagen sponge carrier on bone healing in dogs.

OBJECTIVES: The purposes of this study were to determine: 1) the efficacy of polycaprolactone-g-polyethylene glycol (PCL-g-PEG) and polylactic-co-glycolic acid (PLGA-g-PEG) hydrogels and an absorbable collagen sponge (ACS) as carriers for lysophosphatidic acid (LPA), 2) the effect of LPA on bone healing in dogs, and 3) the ideal dose of LPA to maximally stimulate bone healing. METHODS: Bilateral ulnar ostectomies were performed on purpose bred dogs. Control defects were filled with a PCL-g-PEG or PLGA-g-PEG hydrogel, or a saline soaked ACS. Contralateral defects were filled with a PCL-g-PEG or PLGA-g-PEG hydrogel, or an ACS with each carrying differing concentrations of an LPA solution. Dual-energy X-ray absorptiometry (DXA) was performed. Total bone area (TBA), mineral density (BMD), and mineral content (BMC) were determined at each time point. Relationships between the effect of treatment over time on TBA, BMC and BMD were determined. RESULTS: Phase 1 - There was no significant difference in DXA-based TBA (p = 0.09), BMC (p = 0.33), or BMD (p = 0.74) over time between LPA treatments, or between the LPA treated and control groups TBA (p = 0.95), BMC (p = 0.99), or BMD (p = 0.46). Phase 2 - There was no significant difference over time between LPA treatments in DXA-based TBA (p = 0.33), BMC (p = 0.45), or BMD (p = 0.43), or between the LPA treated and control groups TBA (p = 0.94), BMC (p = 0.38), or BMD (p = 0.17). Phase 3 - There was no significant difference over time between LPA treatments in DXA-based TBA (p = 0.78), BMC (p = 0.88), or BMD (p = 0.35), or between the LPA treated and control groups TBA (p = 0.07), BMC (p = 0.85), or BMD (p = 0.06). There was a significant increase in TBA (p <0.0001) and BMC (p = 0.0014), but a significant decrease in BMD (p <0.0001) was noted over time when all groups were combined. CLINICAL SIGNIFICANCE: Although LPA has shown promise as an osteoinductive agent in research, its performance as a bone graft substitute, as utilized in this study, is unsupported. Further studies are necessary to determine the incorporation and elution kinetics of LPA from the PLGA-g-PEG hydrogel and from an ACS. Hydrogels may have clinical applications for delaying or preventing bone formation.

Sequence-Defined Energetic Shifts Control the Disassembly Kinetics and Microstructure of Amelogenin Adsorbed onto Hydroxyapatite (100).

The interactions between proteins and surfaces are critical to a number of important processes including biomineralization, the biocompatibility of biomaterials, and the function of biosensors. Although many proteins exist as monomers or small oligomers, amelogenin is a unique protein that self-assembles into supramolecular structures called "nanospheres," aggregates of hundreds of monomers that are 20-60 nm in diameter. The nanosphere quaternary structure is observed in solution; however, the quaternary structure of amelogenin adsorbed onto hydroxyapatite (HAP) surfaces is not known even though it may be important to amelogenin's function in forming highly elongated and intricately assembled HAP crystallites during enamel formation. We report studies of the interactions of the enamel protein, amelogenin (rpM179), with a well-defined (100) face prepared by the synthesis of large crystals of HAP. High-resolution in situ atomic force microscopy (AFM) was used to directly observe protein adsorption onto HAP at the molecular level within an aqueous solution environment. Our study shows that the amelogenin nanospheres disassemble onto the HAP surface, breaking down into oligomeric (25-mer) subunits of the larger nanosphere. In some cases, the disassembly event is directly observed by in situ imaging for the first time. Quantification of the adsorbate amounts by size analysis led to the determination of a protein binding energy (17.1k(b)T) to a specific face of HAP (100). The kinetics of disassembly are greatly slowed in aged solutions, indicating that there are time-dependent increases in oligomer-oligomer binding interactions within the nanosphere. A small change in the sequence of amelogenin by the attachment of a histidine tag to the N-terminus of rpM179 to form rp(H)M180 results in the adsorption of a complete second layer on top of the underlying first layer. Our research elucidates how supramolecular protein structures interact and break down at surfaces and how small changes in the primary sequence of amelogenin can affect the disassembly process.

The leucine-rich amelogenin protein (LRAP) is primarily monomeric and unstructured in physiological solution.

Amelogenin proteins are critical to the formation of enamel in teeth and may have roles in controlling growth and regulating microstructures of the intricately woven hydroxyapatite (HAP). Leucine-rich amelogenin protein (LRAP) is a 59-residue splice variant of amelogenin and contains the N- and C-terminal charged regions of the full-length protein thought to control crystal growth. Although the quaternary structure of full-length amelogenin in solution has been well studied and can consist of self-assemblies of monomers called nanospheres, there is limited information on the quaternary structure of LRAP. Here, sedimentation velocity analytical ultracentrifugation (SV) and small angle neutron scattering (SANS) were used to study the tertiary and quaternary structure of LRAP at various pH values, ionic strengths, and concentrations. We found that the monomer is the dominant species of phosphorylated LRAP (LRAP(+P)) over a range of solution conditions (pH 2.7-4.1, pH 4.5-8, 50 mmol/L(mM) to 200 mM NaCl, 0.065-2 mg/mL). The monomer is also the dominant species for unphosphorylated LRAP (LRAP(-P)) at pH 7.4 and for LRAP(+P) in the presence of 2.5 mM calcium at pH 7.4. LRAP aggregates in a narrow pH range near the isoelectric point of pH 4.1. SV and SANS show that the LRAP monomer has a radius of ∼2.0 nm and an asymmetric structure, and solution NMR studies indicate that the monomer is largely unstructured. This work provides new insights into the secondary, tertiary, and quaternary structure of LRAP in solution and provides evidence that the monomeric species may be an important functional form of some amelogenins.

Intracellular accumulation dynamics and fate of zinc ions in alveolar epithelial cells exposed to airborne ZnO nanoparticles at the air-liquid interface.

Airborne nanoparticles (NPs) that enter the respiratory tract are likely to reach the alveolar region. Accumulating observations support a role for zinc oxide (ZnO) NP dissolution in toxicity, but the majority of in-vitro studies were conducted in cells exposed to NPs in growth media, where large doses of dissolved ions are shed into the exposure solution. To determine the precise intracellular accumulation dynamics and fate of zinc ions (Zn(2+)) shed by airborne NPs in the cellular environment, we exposed alveolar epithelial cells to aerosolized NPs at the air-liquid interface (ALI). Using a fluorescent indicator for Zn(2+), together with organelle-specific fluorescent proteins, we quantified Zn(2+) in single cells and organelles over time. We found that at the ALI, intracellular Zn(2+) values peaked 3 h post exposure and decayed to normal values by 12 h, while in submerged cultures, intracellular Zn(2+) values continued to increase over time. The lowest toxic NP dose at the ALI generated peak intracellular Zn(2+) values that were nearly three-folds lower than the peak values generated by the lowest toxic dose of NPs in submerged cultures, and eight-folds lower than the peak values generated by the lowest toxic dose of ZnSO4 or Zn(2+). At the ALI, the majority of intracellular Zn(2+) was found in endosomes and lysosomes as early as 1 h post exposure. In contrast, the majority of intracellular Zn(2+) following exposures to ZnSO4 was found in other larger vesicles, with less than 10% in endosomes and lysosomes. Together, our observations indicate that low but critical levels of intracellular Zn(2+) have to be reached, concentrated specifically in endosomes and lysosomes, for toxicity to occur, and point to the focal dissolution of the NPs in the cellular environment and the accumulation of the ions specifically in endosomes and lysosomes as the processes underlying the potent toxicity of airborne ZnO NPs.

A solution NMR investigation into the impaired self-assembly properties of two murine amelogenins containing the point mutations T21→I or P41→T.

Amelogenesis imperfecta describes a group of inherited disorders that results in defective tooth enamel. Two disorders associated with human amelogenesis imperfecta are the point mutations T21→I or P40→T in amelogenin, the dominant protein present during the early stages of enamel biomineralization. The biophysical properties of wildtype murine amelogenin (M180) and two proteins containing the equivalent mutations in murine amelogenin, T21→I (M180-I) and P41→T (M180-T), were probed by NMR spectroscopy. At low protein concentration (0.1mM), M180, M180-I, and M180-T are predominately monomeric at pH 3.0 in 2% acetic acid and neither mutation produces a major structural change. Chemical shift perturbation studies as a function of protein (0.1-1.8mM) or NaCl (0-400mM) concentrations show that the mutations affect the self-association properties by causing self-assembly at lower protein or salt concentrations, relative to wildtype amelogenin, with the largest effect observed for M180-I. Under both conditions, the premature self-assembly is initiated near the N-terminus, providing further evidence for the importance of this region in the self-assembly process. The self-association of M180-I and M180-T at lower protein concentrations and lower ionic strengths than wildtype M180 may account for the clinical phenotypes of these mutations, defective enamel formation.

Neutron reflectometry studies of the adsorbed structure of the amelogenin, LRAP.

Amelogenins make up over 90% of the protein present during enamel formation and have been demonstrated to be critical in proper enamel development, but the mechanism governing this control is not well understood. Leucine-rich amelogenin peptide (LRAP) is a 59-residue splice variant of amelogenin and contains the charged regions from the full protein thought to control crystal regulation. In this work, we utilized neutron reflectivity (NR) to investigate the structure and orientation of LRAP adsorbed from solutions onto molecularly smooth COOH-terminated self-assembled monolayer (SAM) surfaces. Sedimentation velocity (SV) experiments revealed that LRAP is primarily a monomer in saturated calcium phosphate (SCP) solutions (0.15 M NaCl) at pH 7.4. LRAP adsorbed as ∼32 Šthick layers at ∼70% coverage as determined by NR. Rosetta simulations of the dimensions of LRAP in solution (37 Šdiameter) indicate that the NR determined z dimension is consistent with an LRAP monomer. SV experiments and Rosetta simulations show that the LRAP monomer has an extended, asymmetric shape in solution. The NR data suggests that the protein is not completely extended on the surface, having some degree of structure away from the surface. A protein orientation with the C-terminal and inner N-terminal regions (residues ∼8-24) located near the surface is consistent with the higher scattering length density (SLD) found near the surface by NR. This work presents new information on the tertiary and quaternary structure of LRAP in solution and adsorbed onto surfaces. It also presents further evidence that the monomeric species may be an important functional form of amelogenin proteins.

Injectable and thermogelling hydrogels of PCL-g-PEG: mechanisms, rheological and enzymatic degradation properties.

We report new injectable and thermosensitive hydrogels from polycaprolactone-graft-polyethylene glycol (PCL-g-PEG). The PCL-g-PEG polymer aqueous solution was injectable and formed a physical hydrogel at human body temperature. The rheological properties, sol-gel transition mechanisms, and in vitro degradation properties of PCL-g-PEG hydrogels were investigated. Rheological results demonstrate that hydrogels with tunable storage moduli (G') that span four orders of magnitude, from 0.2 to 5500 Pa, can be obtained by varying polymer concentrations. Hydrophobic dye solubilization, dynamic light scattering, and X-ray diffraction results suggest that micelle aggregation and partial crystallization of the polycaprolactone segment lead to the sol-gel transition with increasing temperature. The degradation of PCL-g-PEG hydrogels was slow in the absence of the enzyme lipase, but can be substantially increased by lipase in a concentration-dependent manner. The PCL-g-PEG hydrogel has a low critical gelation concentration, high storage modulus, and easily handled solid morphology, representing great advantages over our previously developed structurally analogous PLGA-g-PEG. The results presented showcase the potential biomedical application of the versatile PCL-g-PEG hydrogels.

Injectable and thermosensitive PLGA-g-PEG hydrogels containing hydroxyapatite: preparation, characterization and in vitro release behavior.

Here we report the design and characterization of injectable and thermosensitive hydrogel composites comprised of poly(lactic acid-co-glycolic acid)-g-poly(ethylene glycol)(PLGA-g-PEG) containing hydroxyapatite (HA) for potential application in bone tissue engineering. Inclusion of HA into the hydrogels would provide both enhanced mechanical properties and bioactivity to the composites. The effects of HA on the properties of the hydrogels were investigated in terms of storage modulus, sol-gel transition properties, pH and in vitro dye release behavior. The hydrogel composites were also studied by scanning electron microscopy (SEM), x-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). The results revealed that hydrogel composites preserved their sol-gel transition properties in the presence of HA. The storage modulus of the hydrogels was enhanced in a HA-content dependent manner, and the acidic pH environment of the hydrogel was neutralized by HA, both representing great advantages over the hydrogel alone. SEM images showed that HA particles were well dispersed and distributed within the hydrogel matrix. The composites showed a sustained release of a small molecule model dye for up to two weeks with slight increase of release with addition of HA. This work demonstrates the formation of novel thermogelling composites of PLGA-g-PEG and HA that are injectable and promote controlled release.

Cellular recognition and trafficking of amorphous silica nanoparticles by macrophage scavenger receptor A.

The cellular uptake of engineered nanoparticles (ENPs) is known to involve active transport mechanisms, yet the biological molecules involved are poorly understood. We demonstrate that the uptake of amorphous silica ENPs by macrophage cells, and the secretion of proinflammatory cytokines, is strongly inhibited by silencing expression of scavenger receptor A (SR-A). Conversely, ENP uptake is augmented by introducing SR-A expression into human cells that are normally non-phagocytic. Confocal microscopy analyses show that the majority of single or small clusters of silica ENPs co-localize with SR-A and are internalized through a pathway characteristic of clathrin-dependent endocytosis. In contrast, larger silica ENP agglomerates (>500 nm) are poorly co-localized with the receptor, suggesting that the physical agglomeration state of an ENP influences its cellular trafficking. As SR-A is expressed in macrophages throughout the reticulo-endothelial system, this pathway is likely an important determinant of the biological response to ENPs.

A solution NMR investigation into the murine amelogenin splice-variant LRAP (Leucine-Rich Amelogenin Protein).

Amelogenins are the dominant proteins present in ameloblasts during the early stages of enamel biomineralization, making up >90% of the matrix protein. Along with the full-length protein there are several splice-variant isoforms of amelogenin present including LRAP (Leucine-Rich Amelogenin Protein), a protein that consists of the first 33 and the last 26 residues of full-length amelogenin. Using solution-state NMR spectroscopy we have assigned the (1)H-(15)N HSQC spectrum of murine LRAP (rp(H)LRAP) in 2% acetic acid at pH 3.0 by making extensive use of previous chemical shift assignments for full-length murine amelogenin (rp(H)M180). This correlation was possible because LRAP, like the full-length protein, is intrinsically disordered under these solution conditions. The major difference between the (1)H-(15)N HSQC spectra of rp(H)M180 and rp(H)LRAP was an additional set of amide resonances for each of the seven non-proline residues between S12 and Y12 near the N-terminus of rp(H)LRAP indicating that the N-terminal region of LRAP exists in two different conformations. Analysis of the proline carbon chemical shifts suggests that the molecular basis for the two states is not a cis-trans isomerization of one or more of the proline residues in the N-terminal region. Starting from 2% acetic acid, where rp(H)LRAP was monomeric in solution, NaCl addition effected residue specific changes in molecular dynamics manifested by the reduction in intensity and disappearance of (1)H-(15)N HSQC cross peaks. As observed for the full-length protein, these perturbations may signal early events governing supramolecular self-assembly of rp(H)LRAP into nanospheres. However, the different patterns of (1)H-(15)N HSQC cross peak perturbation between rp(H)LRAP and rp(H)M180 in high salt suggest that the termini may behave differently in their respective nanospheres, and perhaps, these differences contribute to the cell signaling properties attributable to LRAP but not to the full-length protein.

The leucine rich amelogenin protein (LRAP) adsorbs as monomers or dimers onto surfaces.

Amelogenin is believed to be involved in controlling the formation of the highly anisotropic and ordered hydroxyapatite crystallites that form enamel. The adsorption behavior of amelogenin proteins onto substrates is very important because protein-surface interactions are critical to its function. We have previously used LRAP, a splice variant of amelogenin, as a model protein for the full-length amelogenin in solid-state NMR and neutron reflectivity studies at interfaces. In this work, we examined the adsorption behavior of LRAP in greater detail using model self-assembled monolayers containing COOH, CH(3), and NH(2) end groups as substrates. Dynamic light scattering (DLS) experiments indicated that LRAP in phosphate buffered saline and solutions containing low concentrations of calcium and phosphate consisted of aggregates of nanospheres. Null ellipsometry and atomic force microscopy (AFM) were used to study protein adsorption amounts and quaternary structures on the surfaces. Relatively high amounts of adsorption occurred onto the CH(3) and NH(2) surfaces from both buffer solutions. Adsorption was also promoted onto COOH surfaces only when calcium was present in the solutions suggesting an interaction that involves calcium bridging with the negatively charged C-terminus. The ellipsometry and AFM studies revealed that LRAP adsorbed onto the surfaces as small subnanosphere-sized structures such as monomers or dimers. We propose that the monomers/dimers were present in solution even though they were not detected by DLS or that they adsorbed onto the surfaces by disassembling or "shedding" from the nanospheres that are present in solution. This work reveals the importance of small subnanosphere-sized structures of LRAP at interfaces.

Syndecan-1 mediates the coupling of positively charged submicrometer amorphous silica particles with actin filaments across the alveolar epithelial cell membrane.

The cellular interactions and pathways of engineered submicro- and nano-scale particles dictate the cellular response and ultimately determine the level of toxicity or biocompatibility of the particles. Positive surface charge can increase particle internalization, and in some cases can also increase particle toxicity, but the underlying mechanisms are largely unknown. Here we identify the cellular interaction and pathway of positively charged submicrometer synthetic amorphous silica particles, which are used extensively in a wide range of industrial applications, and are explored for drug delivery and medical imaging and sensing. Using time lapse fluorescence imaging in living cells and other quantitative imaging approaches, it is found that heparan sulfate proteoglycans play a critical role in the attachment and internalization of the particles in alveolar type II epithelial cell line (C10), a potential target cell type bearing apical microvilli. Specifically, the transmembrane heparan sulfate proteoglycan, syndecan-1, is found to mediate the initial interactions of the particles at the cell surface, their coupling with actin filaments across the cell membrane, and their subsequent internalization via macropinocytosis. The observed interaction of syndecan molecules with the particle prior to their engagement with actin filaments suggests that the particles initiate their own internalization by facilitating the clustering of the molecules, which is required for the actin coupling and subsequent internalization of syndecan. Our observations identify a new role for syndecan-1 in mediating the cellular interactions and fate of positively charged submicrometer amorphous silica particles in the alveolar type II epithelial cell, a target cell for inhaled particles.

Modification of polyurethane to reduce occlusion of enteral feeding tubes.

Feeding tubes are used to supply nutritional formula to immobilized patients. The most common cause for failure of enteral feeding tubes is their occlusion. The purpose of this study was to examine whether occlusion of enteral feeding tubes could be minimized using an additive. An open, intermittent enteral feeding system was simulated in the laboratory and data were collected over a period ranging from 2 to 6 days. Feeding formula was cycled through a feeding tube in either the presence or absence of simulated gastric acid in an effort to generate a reproducible occlusion. Pressures in the tube were measured frequently throughout these cycles. We observed pressure spikes with each cycle, but never a complete occlusion. Pressure spikes formed only when simulated gastric acid was mixed with the feeding solution. Large amounts of feeding formula adsorbed onto polyurethane (PU) surfaces in the presence of gastric acid. Also, this subtle change in surface chemistry significantly affected the number of pressure spikes observed. The maximum pressure required to maintain flow in the tube was reduced by about half from 2.0 psi to 0.8 psi when polyvinyl alcohol (PVA) was added. The addition of PVA to PU also reduced the contact angle from 83 degrees (untreated) to approximately 64 degrees in the presence of PVA. Furthermore, when formula was added to PU in the presence of PVA the thickness of the layer that remained on the surface was almost 10 times greater in controls than on PVA-treated surfaces. These results suggest that a treatment that increases the hydrophilicity of the feeding tube may help minimize clogging.