ABSTRACT
Cellulose nanocrystals (CNCs) are cellulose-derived nanomaterials that can be easily obtained, e.g., from vegetable waste produced by circular economies. They show promising antimicrobial activity and an absence of side effects and toxicity. This study investigated the ability of CNCs to reduce microbial adherence and biofilm formation using in vitro microbiological models reproducing the oral environment. Microbial adherence by microbial strains of oral interest, Streptococcus mutans and Candida albicans, was evaluated on the surfaces of salivary pellicle-coated enamel disks in the presence of different aqueous solutions of CNCs. The anti-biofilm activity of the same CNC solutions was tested against S. mutans and an oral microcosm model based on mixed plaque inoculum using a continuous-flow bioreactor. Results showed the excellent anti-adherent activity of the CNCs against the tested strains from the lowest concentration tested (0.032 wt. %, p < 0.001). Such activity was significantly higher against S. mutans than against C. albicans (p < 0.01), suggesting a selective anti-adherent activity against pathogenic strains. At the same time, there was a minimal, albeit significant, anti-biofilm activity (0.5 and 4 wt. % CNC solution for S. mutans and oral microcosm, respectively, p = 0.01). This makes CNCs particularly interesting as anticaries agents, encouraging their use in the oral field.
ABSTRACT
STATEMENT OF PROBLEM: Titanium has been considered the standard element in implant manufacturing. Recent studies have evaluated the role of titanium as a biological modulator of oral health. However, evidence regarding the association between the release of metal particles and peri-implantitis is lacking. PURPOSE: The purpose of this scoping review was to evaluate the literature regarding the release of metal particles in peri-implant tissues correlated with the methods of detection and the local and systemic implications. MATERIAL AND METHODS: The study was performed in adherence with the Preferred Reporting Items for Systematic reviews and Meta-Analyses extension for Scoping Reviews (PRISMA-ScR) guidelines and was registered with the National Institute for Health Research PROSPERO (Submission No. 275576; ID: CRD42021275576). A systematic search was conducted in the Cochrane Central Register of Controlled Trials, EMBASE, MEDLINE via PubMed, Scopus, and Web of Science bibliographic databases, complemented by a manual evaluation. Only in vivo human studies written in the English language and published between January 2000 and June 2022 were included. RESULTS: In total, 10 studies were included according to eligibility criteria. Different tissues and analytic techniques were reported: the characterization technique most used was inductively coupled plasma mass spectrometry. All 10 studies analyzed the release of metal particles in patients with dental implants, continuously detecting titanium. None of the studies reported a significant association between metal particles and biological effects. CONCLUSIONS: Titanium is still considered the material of choice in implant dentistry, despite the detection of metal particles in peri-implant tissues. Further studies are necessary to evaluate the association between analytes and local health or inflammatory status.
ABSTRACT
Several chronic disorders including type 2 diabetes (T2D), obesity, heart disease and cancer are preceded by a state of chronic low-grade inflammation. Biomarkers for the early assessment of chronic disorders encompass acute phase proteins (APP), cytokines and chemokines, pro-inflammatory enzymes, lipids and oxidative stress mediators. These substances enter saliva through the blood flow and, in some cases, there is a close relation between their salivary and serum concentration. Saliva can be easily collected and stored with non-invasive and cost-saving procedures, and it is emerging the concept to use it for the detection of inflammatory biomarkers. To this purpose, the present review aims to discuss the advantages and challenges of using standard and cutting-edge techniques to discover salivary biomarkers which may be used in diagnosis/therapy of several chronic diseases with inflammatory consequences with the pursuit to possibly replace conventional paths with detectable soluble mediators in saliva. Specifically, the review describes the procedures used for saliva collection, the standard approaches for the measurement of salivary biomarkers and the novel methodological strategies such as biosensors to improve the quality of care for chronically affected patients.
Subject(s)
Diabetes Mellitus, Type 2 , Humans , Diabetes Mellitus, Type 2/diagnosis , Biomarkers , Cytokines , Inflammation/diagnosis , Oxidative StressABSTRACT
The use of alternative matrices in toxicological analyses has been on the rise in clinical and forensic settings. Oral fluid (OF), as non-invasive fluid, has attracted attention in the field of drug screening, both for therapeutic and forensic purposes, as well as for medical diagnosis, clinical management, on-site (real time) doping and for monitoring environmental exposure to toxic substances. A good correlation between OF and blood is now established for drug concentrations. Therefore, OF might be a potential substitute of blood, especially for long-term surveillance (e.g., therapeutic drugs) or to screen a large number of patients, as well as for the development of salivary point-of-care technologies. In this review, we aimed to summarize and critically evaluate the current literature that focused on the comparison of drugs detection in OF and blood specimens.
Subject(s)
Saliva , Substance Abuse Detection , Humans , Forensic MedicineABSTRACT
OBJECTIVES: The aim of the present systematic review and meta-analysis is to assess the accuracy of automated landmarking using deep learning in comparison with manual tracing for cephalometric analysis of 3D medical images. METHODS: PubMed/Medline, IEEE Xplore, Scopus and ArXiv electronic databases were searched. Selection criteria were: ex vivo and in vivo volumetric data images suitable for 3D landmarking (Problem), a minimum of five automated landmarking performed by deep learning method (Intervention), manual landmarking (Comparison), and mean accuracy, in mm, between manual and automated landmarking (Outcome). QUADAS-2 was adapted for quality analysis. Meta-analysis was performed on studies that reported as outcome mean values and standard deviation of the difference (error) between manual and automated landmarking. Linear regression plots were used to analyze correlations between mean accuracy and year of publication. RESULTS: The initial electronic screening yielded 252 papers published between 2020 and 2022. A total of 15 studies were included for the qualitative synthesis, whereas 11 studies were used for the meta-analysis. Overall random effect model revealed a mean value of 2.44 mm, with a high heterogeneity (I2 = 98.13%, τ2 = 1.018, p-value < 0.001); risk of bias was high due to the presence of issues for several domains per study. Meta-regression indicated a significant relation between mean error and year of publication (p value = 0.012). CONCLUSION: Deep learning algorithms showed an excellent accuracy for automated 3D cephalometric landmarking. In the last two years promising algorithms have been developed and improvements in landmarks annotation accuracy have been done.
Subject(s)
Deep Learning , Humans , Anatomic Landmarks , Reproducibility of Results , Cephalometry/methods , Imaging, Three-Dimensional/methods , AlgorithmsABSTRACT
This systematic review aims to evaluate the evidence on the efficacy of mouth rinses on SARS-CoV-2 from in vitro studies. Five electronic databases were searched up to February 2021; no language or time restrictions were used. Two independent reviewers conducted both selection and data extraction processes. The toxicological data reliability assessment tool was used to evaluate the risk of bias. Starting from 239 articles, retrieved by the electronic search, only eight studies were included in our systematic review. Povidone Iodine (PVP-I) was effective in killing SARS-CoV-2, demonstrated higher virucidal activity than other commonly used active ingredients. Conflicting results were found about the effectiveness of Chlorhexidine (CHX) while hydrogen peroxide (H2O2) proved less effective than PVP-I. Other active ingredients, such as quaternary ammonium compounds and Ethanol (particularly when combined with essential oils), have also shown promising results in reducing viral load, with results comparable to PVP-I.
Subject(s)
Anti-Infective Agents, Local , COVID-19 , Anti-Infective Agents, Local/pharmacology , Humans , Hydrogen Peroxide/pharmacology , Mouthwashes/pharmacology , Reproducibility of Results , SARS-CoV-2ABSTRACT
The recent introduction of three-dimensional (3D) printing is revolutionizing dentistry and is even being applied to orthodontic treatment of malocclusion. Clear, personalized, removable aligners are a suitable alternative to conventional orthodontic appliances, offering a more comfortable and efficient solution for patients. Including improved oral hygiene and aesthetics during treatment. Contemporarily, clear aligners are produced by a thermoforming process using various types of thermoplastic materials. The thermoforming procedure alters the properties of the material, and the intraoral environment further modifies the properties of a clear aligner, affecting overall performance of the material. Direct 3D printing offers the creation of highly precise clear aligners with soft edges, digitally designed and identically reproduced for an entire set of treatment aligners; offering a better fit, higher efficacy, and reproducibility. Despite the known benefits of 3D printing and the popularity of its dental applications, very limited technical and clinical data are available in the literature about directly printed clear aligners. The present article discusses the advantages of 3D printed aligners in comparison to thermoformed ones, describes the current state of the art, including a discussion of the possible road blocks that exist such as a current lack of approved and marketed materials and limited existence of aligner specific software. The present review suggests the suitability of 3D direct printed aligners is superior to that of thermoformed manufactured aligners because of the prior's increased accuracy, load resistance, and lower deformation. It is an overall more stable way to produce an aligner where submillimeter movements can make a difference in treatment outcome. Direct 3D printing represents a complex method to control the thickness of the aligner and therefore has a better ability to control the force vectors that are used to produce tooth movement. There is currently no other approved material on the market that can do this. The conclusion of this article is that we encourage further in vitro and in vivo studies to test these new technologies and materials.
ABSTRACT
The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) outbreak started just a couple of months ago and it grew rapidly causing several deaths and morbidities. The mechanism behind the transmission of the virus is still not completely understood despite a multitude of new specific manuscripts being published daily. This article highlights the oral cavity as a possible viral transmission route into the body via the Angiotensin converting enzyme 2 receptor. It also provides guidelines for routine protective measures in the dental office while delivering oral health care.
Subject(s)
Coronavirus Infections/epidemiology , Dental Care , Mouth/virology , Peptidyl-Dipeptidase A , Pneumonia, Viral/epidemiology , Angiotensin-Converting Enzyme 2 , Betacoronavirus , COVID-19 , Coronavirus Infections/prevention & control , Delivery of Health Care , Humans , Oral Health , Pandemics/prevention & control , Pneumonia, Viral/prevention & control , Practice Guidelines as Topic , SARS-CoV-2ABSTRACT
OBJECTIVE: To compare the effectiveness of a novel cetylpyridinium chloride (CPC)-hyaluronic acid (HA)-based mouthrinse with chlorhexidine (CHX) and placebo mouthrinses in preventing plaque and gingivitis. The secondary outcomes were calculus, extrinsic stains, oral malodour and occurrence of adverse events. METHODS: A 21-day randomized, double-blind, three-arm parallel study with random allocation of young dental students to any of the three mouthrinse groups. Thorough prophylaxis was done at baseline followed by a baseline examination for oral malodour, extrinsic stains, calculus, gingivitis and plaque by a single examiner. All the subjects used the allocated mouthrinse twice daily for 21 days and were examined again at the end of the experimental period. They were also interviewed for adverse events. Change in the scores of clinical indices was calculated and compared between the groups. RESULTS: A total of 75 subjects were included and completed the experiment. There was a significant difference for change in plaque index scores between the groups (P = .015); subjects in the placebo group experienced higher levels of plaque accumulation than the other groups. Teeth staining increased in the CHX (P < .001) and placebo groups (P = .002), but not in CPC-HA users (P = .573). No significant differences were found between the three experimental groups for change in the gingival index (P = .08), calculus scores (P = .494), oral malodour (P = .870) and reporting of adverse events (P = .249). CONCLUSIONS: CPC-HA and CHX had similar effectiveness in preventing plaque accumulation, while no differences were observed between the mouthrinses for preventing gingivitis. Dental staining was caused by CHX and the placebo mouthrinses but not by CPC-HA mouthrinse.
Subject(s)
Anti-Infective Agents, Local , Gingivitis , Cetylpyridinium , Chlorhexidine , Dental Plaque Index , Double-Blind Method , Humans , Hyaluronic Acid , Mouthwashes , Treatment OutcomeABSTRACT
BACKGROUND: Poor oral hygiene is strongly associated with oral and systemic diseases. Alongside mechanical tooth cleaning, the adjunctive use of mouthrinses has been widely advocated. Although research on the efficacy of various mouthrinse formulations is very active, there are a lack of conclusive data regarding their adverse effects. METHODS: We undertook a systematic review in accordance wih PRISMA guidelines of electronic databases of clinical trials of any duration with daily home use of mouthwashes, presenting clinical and subjective side effects (PROSPERO registration: CRD42016054037). RESULTS: After evaluating 614 titles and abstracts, 154 studies were selected for full-text analysis; 85 final papers were included. Based on the active ingredient in the test product, nine categories were created: cetyl pyridinium chloride, essential oils, chlorhexidine, triclosan, natural products, diclofenac, fluorides, delmopinol, and miscellaneous active substances. Most of the studies were of short duration (less than 6 months) with a defective 'methods' description; the reporting of adverse events often being overlooked. Both local morphological (oral mucosa and dental-crown staining, mucosal lesions) and functional (taste modifications, abnormal oral sensation) alterations were reported. Tooth staining was the most commonly listed adverse event, but it was quantitatively assessed only in a very small number of papers; most studies relied on patient reports. Staining was time associated; the longer the study, the higher its reported incidence and severity. CONCLUSIONS: The reduced report of side effects may partly be due to a lack of an objective measure and lack of general guidelines that demand studies report their adverse events. The most frequently reported adverse effect was teeth staining. As in most studies, the effect was associated with trial duration; clinical trials should be of sufficient duration. New investigations meeting the suggested criteria of a minimal duration of 6 months should be planned.
ABSTRACT
BACKGROUND: The purpose of this study was to examine surface electromyographic (sEMG) activity of masticatory muscles before and after functional orthopaedic therapy with Sander appliance. MATERIAL AND METHODS: Ten adolescents (5 girls, 5 boys) with an Angle Class II, division I malocclusion, 9-13 years old, were submitted to sEMG before and after functional orthopaedic therapy. To verify the neuromuscular equilibrium, the standardized EMG activities of right and left masseter and anterior temporal muscles were recorded during maximum voluntary clench, and analysed calculating: POC (index of the symmetric distribution of the muscular activity determined by the occlusion); TC (index of presence of mandibular torque) and Ac (index suggesting the position of occlusal barycentre). The total muscular activity was also calculated. Pre- and post- functional therapy data were compared with Wilcoxon Signed-Rank Test. RESULTS: Before treatment, all subjects had a good neuromuscular equilibrium, which was not altered by treatment. CONCLUSIONS: sEMG evaluations allow to quantify the impact of occlusion on masticatory muscle activity and to control that the functional orthopaedic therapy maintain a good muscular coordination. Key words:Functional appliance, Sander appliance, electromyography, masticatory muscles.
ABSTRACT
PURPOSE: To determine the dental implant and prostheses success rate in a cohort of patients who underwent a vascularized fibula-free flap (FFF) for maxillary or mandibular reconstruction. METHODS: The investigators implemented a retrospective cohort study composed of patients who had undergone primary or secondary FFF reconstruction jaw surgery plus placement of 2-6 implants in the reconstructed arch, which were restored with an implant-supported prosthesis. The sample was composed of all patients who underwent FFF surgery between 1998 and 2012 and had either simultaneous or secondary dental implant placement. A total of 28 patients met inclusion criteria. Of these, 22 patients participated in the retrospective review. Patients were examined by an independent observer between January-December 2015. In addition, all patients completed a questionnaire to access satisfaction with the implant-supported prosthesis. RESULTS: The patient cohort consisted of 12 males and 10 females, age 12-70 years. A total of 100 implants were placed, 92 implants in fibular bone and 8 implants in native bone. In the maxilla, 35 implants were placed into fibular bone and 4 into native bone (11 in irradiated patients and 28 in non-irradiated patients). In the mandible, 57 implants were placed into fibular bone and 4 into native bone (15 in irradiated patients and 46 in non-irradiated patients). The mean follow-up after implant loading was 7.8 years (range 1.3-17.5 years). The implant survival rate was 98% (95% CI: 92.2%-99.5%). No statistically significant difference was found in implant success between maxillary and mandibular implants, or between radiated and non-radiated bone. The prostheses success rate, determined by clinical exam and patient satisfaction, was 100%. CONCLUSION: The results of this study suggest that implant survival is high and implant-supported prostheses are a reliable rehabilitation option in patients whose jaws have been reconstruction with a FFF.
Subject(s)
Dental Implants , Fibula/transplantation , Free Tissue Flaps , Mandibular Reconstruction/methods , Maxilla/surgery , Adolescent , Adult , Aged , Child , Cohort Studies , Female , Humans , Male , Mandibular Reconstruction/rehabilitation , Middle Aged , Retrospective Studies , Time Factors , Young AdultABSTRACT
BACKGROUND: To investigate the modifications induced by rapid maxillary expansion (RME) on the electromyographic (EMG) activities of the anterior temporal and superficial masseter muscles, in patients without pre-treatment EMG alterations. MATERIAL AND METHODS: Twenty-one patients with unilateral posterior cross-bite selected from the orthodontic department of the University of L'Aquila (Italy), were enrolled. There was no control group in this study since each subject acted as a control of her/himself. Two surface EMG recordings were taken: T0 (before RME) and at T1 (3 month after the end of expansion). To verify the neuromuscular equilibrium, the EMG activities of both right and left masseter and anterior temporal muscles were recorded during a test of maximum clench. EMG indexes were compared by paired Student's t-test. RESULTS: In both occasions, all indices showed a good symmetry between the right and left side masticatory muscles. No statistically significant differences were found between the two recordings. CONCLUSIONS: In children without pre-treatment EMG alterations, no variations in standardized muscular activity after RME were found. The treatment did not alter the equilibrium of the masseter and temporal muscles. Key words:Rapid maxillary expansion, electromyography, masticatory muscles.
ABSTRACT
PURPOSE: Nowadays, with the increased diffusion of Cone Beam Computerized Tomography (CBCT) scanners in dental and maxillo-facial practice, 3D cephalometric analysis is emerging. Maxillofacial surgeons and dentists make wide use of cephalometric analysis in diagnosis, surgery and treatment planning. Accuracy and repeatability of the manual approach, the most common approach in clinical practice, are limited by intra- and inter-subject variability in landmark identification. So, we propose a computer-aided landmark annotation approach that estimates the three-dimensional (3D) positions of 21 selected landmarks. METHODS: The procedure involves an adaptive cluster-based segmentation of bone tissues followed by an intensity-based registration of an annotated reference volume onto a patient Cone Beam CT (CBCT) head volume. The outcomes of the annotation process are presented to the clinician as a 3D surface of the patient skull with the estimate landmark displayed on it. Moreover, each landmark is centered into a spherical confidence region that can help the clinician in a subsequent manual refinement of the annotation. The algorithm was validated onto 18 CBCT images. RESULTS: Automatic segmentation shows a high accuracy level with no significant difference between automatically and manually determined threshold values. The overall median value of the localization error was equal to 1.99 mm with an interquartile range (IQR) of 1.22-2.89 mm. CONCLUSION: The obtained results are promising, segmentation was proved to be very robust and the achieved accuracy level in landmark annotation was acceptable for most of landmarks and comparable with other available methods.
Subject(s)
Algorithms , Anatomic Landmarks/diagnostic imaging , Cone-Beam Computed Tomography/methods , Image Processing, Computer-Assisted/methods , Imaging, Three-Dimensional/methods , Skull/diagnostic imaging , Cephalometry , Humans , Reproducibility of ResultsABSTRACT
INTRODUCTION: Poor oral hygiene is a major risk factor for oral diseases. Regular home-based care is essential to maintain good oral hygiene. In particular, mouthrinses can support conventional tooth brushing in reducing accumulation of oral plaque. Areas covered: The most common molecules contained in mouthrinses (chlorhexidine, essential oils, cetyl pyridinium chloride, triclosan, octeneidine, delmopinol, polyvinylpyrrolidone, hyaluronic acid, natural compounds) are discussed, together with relevant clinical and in vitro studies, focusing on their effects on periodontal health. Currently, chlorhexidine is the most efficacious compound, with both antiplaque and antibacterial activities. Similar results are reported for essential oils and cetyl pyridinium chloride, although with a somewhat reduced efficacy. Considering the adverse effects of chlorhexidine and its time-related characteristics, this molecule may best be indicated for acute/short-term use, while essential oils and cetyl pyridinium chloride may be appropriate for long-term, maintenance treatment. Expert opinion: The literature has not clearly demonstrated which compound is the best for mouthrinses that combine good efficacy and acceptable side effects. Research should focus on substances with progressive antibacterial activity, prompting a gradual change in the composition of oral biofilm and mouthrinses that combine two or more molecules acting synergistically in the mouth.
Subject(s)
Mouthwashes/therapeutic use , Periodontal Diseases/drug therapy , Disinfectants/therapeutic use , Humans , Treatment OutcomeABSTRACT
OBJECTIVE: To assess whether three-dimensional morphometric parameters could be useful in nasal septal deviation (NSD) diagnosis and, secondarily, whether CBCT could be considered an adequate imaging technique for the proposed task. METHODS: We analysed images of 46 subjects who underwent CBCT for reasons not related to this study. Two experienced operators divided all the images into healthy and NSD subjects. Subsequently, the images were segmented using ITK Snap in order to obtain the three-dimensional model of the nasal airways and compute four morphological parameters: septal deviation angle (SDA), percentage of volume difference between right and left side of the nasal airways, nasal airway total volume and a new synthetic septal deviation index (SDI). Principal component analysis (PCA) was used to unveil relationships between each variable and the global nasal airway variability. RESULTS: Differences between the groups were found in SDA (p < 0.001), in volume percentage difference (p < 0.05) and in SDI (p < 0.001). PCA showed high correlation between the SDI and the first principal component (0.97, p < 0.001). CONCLUSIONS: Among the analysed parameters, SDI seemed to be the most suitable for the quantitative assessment of NSD, and CBCT allowed accurate assessment of airway morphology.
Subject(s)
Cone-Beam Computed Tomography/methods , Nasal Septum/abnormalities , Adult , Female , Humans , Image Processing, Computer-Assisted/methods , Imaging, Three-Dimensional/methods , Male , Middle Aged , Nasal Cavity/diagnostic imaging , Nasal Septum/diagnostic imaging , Organ Size , Principal Component Analysis , Radiographic Image Interpretation, Computer-Assisted/methodsABSTRACT
OBJECTIVES: Zirconia-based prostheses are used for esthetic crown and fixed restorations, but follow-ups are still limited. The authors evaluated the 7-year clinical results of 303 zirconia core restorations, performed in a general dental private practice. MATERIALS AND METHODS: Clinical events (fracture and loss of retention, gingivitis, tenderness, excess cement, and temporary pain) were recorded in 303 zirconia core restorations positioned in 88 patients. Kaplan-Meier survival probability estimates were computed for failures (needed the replacement or removal of the prosthesis) and complications (resolved without replacing the prosthesis). RESULTS: One hundred and fifty single crowns (130 tooth-supported, 20 implant-supported) and 153 multiple units up to 6 elements (49 tooth-supported, 104 implant-supported) were followed-up for 7 years in 88 patients (40 men, 48 women), aged 35-89 years (mean 57). During the follow-up period, there were no complications for 287 (95 %) of the restorations. Sixteen restorations/abutment teeth (5 %) had some complication: extraction of abutment tooth (7, 2 %); caries (2, 1 %), porcelain veneer fracture (3, 1 %), loss of retention (4, 1 %). Nine (3 %) restorations were recorded as failures. The overall 7-year survival probability estimate for failures was 0.966 (95 % confidence limits, 0.932 and 0.983), for complications was 0.976 (95 % confidence limits 0.947 and 0.989), with a cumulative survival rate of 94.7 %. CONCLUSIONS: Within the analyzed follow-up, zirconia core restorations appear a good clinical solution, with favorable functional properties. CLINICAL RELEVANCE: All ceramic restorations can be successfully used for both single-and multiple-unit prostheses, either teeth or implants supported.
Subject(s)
Crowns , Dental Prosthesis, Implant-Supported , Denture, Partial, Fixed , Adult , Aged , Aged, 80 and over , Dental Restoration Failure , Esthetics, Dental , Female , General Practice, Dental , Humans , Male , Middle Aged , Prospective Studies , ZirconiumABSTRACT
OBJECTIVE: To identify esthetic characteristics of the orbital soft tissues of attractive Italian adult women and men. MATERIALS AND METHODS: Three-dimensional computerized digitizers were used to collect the coordinates of facial landmarks in 199 healthy, normal subjects aged 18 to 30 years (71 women, 128 men; mean age, 22 years) and in 126 coetaneous attractive subjects (92 women, 34 men; mean age, 20 years) selected during beauty competitions. From the landmarks, six linear distances, two ratios, six angles, and two areas were calculated. Attractive subjects were compared with normal ones by computing z-scores. RESULTS: Intercanthal width was reduced while eye fissure lengths were increased in both genders. Orbital heights (os-or) were increased only in attractive women, with a significant gender-related difference. The inclinations of the eye fissure were increased in attractive subjects, while the inclinations of the orbit were reduced. For several of the analyzed measurements, similar patterns of z-scores were observed for attractive men and women (r â=â .883). CONCLUSION: Attractive women and men had several specific esthetic characteristics in their orbital soft tissues; esthetic reference values can be used to determine optimal goals in surgical treatment.
Subject(s)
Beauty , Orbit/anatomy & histology , Adolescent , Adult , Anatomic Landmarks/anatomy & histology , Cephalometry/methods , Computers, Handheld , Eyelids/anatomy & histology , Female , Humans , Imaging, Three-Dimensional/methods , Italy , Male , Sex Factors , White People , Young AdultABSTRACT
OBJECTIVE: To provide quantitative information about the facial soft tissue of Italian and Northern Sudanese subjects with Down syndrome by using summary anthropometric measurements. DESIGN, SETTING, AND PATIENTS: The three-dimensional coordinates of soft tissue facial landmarks were obtained using a computerized digitizer in 54 Italian subjects with Down syndrome (20 females and 34 males, 13 to 52 years), in 64 Northern Sudanese subjects with Down syndrome (18 females and 46 males, 5 to 34 years), and in 578 Italian and 653 Northern Sudanese reference subjects, matched for sex and age. From the landmarks, 16 facial dimensions were calculated. Data from subjects with Down syndrome were compared with those collected from control individuals by computing z scores. Two summary anthropometric measurements for quantifying craniofacial variations were obtained: the mean z score (an index of overall facial size) and its standard deviation, the craniofacial variability index (an index of facial harmony). RESULTS: In subjects with Down syndrome, facial size was significantly smaller and craniofacial variability was significantly greater than in typically developed individuals; 93% of Italian and 81% of Northern Sudanese subjects with Down syndrome had one or both values outside the normal interval. Overall, Italian subjects with Down syndrome differed more from the norm than did those from Northern Sudan. In the Northern Sudanese subjects, the mean z scores and the craniofacial variability index were significantly influenced by age: Older Northern Sudanese subjects with Down syndrome had smaller mean z scores and craniofacial variability index values than younger subjects. CONCLUSIONS: The two ethnic groups had different alterations in their soft tissue facial dimensions that were partially influenced by age.
Subject(s)
Down Syndrome/pathology , Face/abnormalities , Adolescent , Adult , Anatomic Landmarks , Anthropometry , Child , Child, Preschool , Female , Humans , Italy , Male , Middle Aged , SudanABSTRACT
OBJECTIVE: The purpose of this study was to verify the characteristics of surface electromyography (sEMG) of masticatory muscles in patients with temporomandibular disorders (TMDs) with differing pathology. STUDY DESIGN: A total of 24 patients with TMDs were categorized according to the Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD); magnetic resonance imaging (MRI) classified the patients as having disk displacement alone (DD) (mean age, 22 years; SD, 5; 3 men, 6 women) or having osteoarthrosis with or without disk displacement (OA) (mean age, 37 years; SD, 10; 4 men, 11 women); sEMG was performed according to a standardized protocol. RESULTS: The MRI score was significantly correlated to the torque coefficient (r = 0.57) and the temporalis (r = 0.85) and masseter (r = 0.46) muscle standardized symmetry. The discriminating ability of participant age and sEMG scores in separating the 2 groups was assessed by receiver operating characteristic analysis. Each of the sEMG scores showed a significant ability in discriminating between osteoarthrosis and disk displacement. CONCLUSIONS: The recording of the masticatory muscle function through sEMG can be a first diagnostic approach to patients with TMDs, reserving MRI assessment to selected cases.