Electrochemical intercalation of rubidium into graphite, hard carbon, and soft carbon.

The electrochemical insertion of Rb into carbonaceous materials, including graphite, was achieved herein. Rubidium ions were reversibly inserted into and extracted from graphite via electrochemical processes using different non-aqueous electrolytes containing rubidium bis(trifluoromethanesulfonyl)amide (RbTFSA) salts in carbonate esters, glymes, and ionic liquids, similar to the process used for other lighter alkali metal ions such as Li+ and K+. The chemical compositions of the rubidiated graphite were determined to be RbC8, RbC24, and RbC36 at each step of the electrochemical reduction process. Graphite underwent a phase transition to RbC8 exhibiting a stage-1 structure, with stage-3 RbC36 and stage-2 RbC24 as intermediates, as confirmed by ex situ and in situ X-ray diffraction and ex situ Raman spectroscopy, similar to the electrochemical phase evolution of staged potassium graphite intercalation compounds (K-GICs). Furthermore, Rb was reversibly inserted into and extracted from graphitizable and non-graphitizable carbons such as pitch-derived soft carbon and commercial hard carbon, along with other alkali metals such as Li, Na, and K.

Surfactant-Free Formate/O2 Biofuel Cell with Electropolymerized Phenothiazine Derivative-Modified Enzymatic Bioanode.

A formate (HCOO-) bioanode was developed by utilizing a phenothiazine-based electropolymerized layer deposited on sucrose-derived carbon. The electrode modified with NAD-dependent formate dehydrogenase and the electropolymerized layer synergistically catalyzed the oxidation of the coenzyme (NADH) and fuel (HCOO-) to achieve efficient electron transfer. Further, the replacement of carbon nanotubes with water-dispersible sucrose-derived carbon used as the electrode base allowed the fabrication of a surfactant-free bioanode delivering a maximum current density of 1.96 mA cm-2 in the fuel solution. Finally, a separator- and surfactant-free HCOO-/O2 biofuel cell featuring the above bioanode and a gas-diffusion biocathode modified with bilirubin oxidase and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate) was fabricated, delivering a maximum power density of 70 µW cm-2 (at 0.24 V) and an open-circuit voltage of 0.59 V. Thus, this study demonstrates the potential of formic acid as a fuel and possibilities for the application of carbon materials in bioanodes.

Impact of electrolyte decomposition products on the electrochemical performance of 4 V class K-ion batteries.

In the pursuit of long-life K-ion batteries (KIBs), half-cell measurements using highly reactive K metal counter electrodes are a standard practice. However, there is increasing evidence of electrolyte decomposition by K metal impacting electrode performance. Herein, we systematically explored the K metal-treated electrolytes KPF6, KN(SO2F)2 (KFSA), and their combination in ethylene carbonate/diethyl carbonate (EC/DEC), referred to as K-KPF6, K-KFSA, and K-KPF6:KFSA, respectively, after storage in contact with K metal. Through mass spectrometry analysis, we identified significant formation of carbonate ester-derived decomposition products such as oligocarbonates for K-KPF6, while K-KFSA predominantly generates anions combining FSA- with the solvent structures. Using three-electrode cells, we delineated the positive effects of the K-KFSA and K-KPF6:KFSA electrolytes on graphite negative electrode performance and the negative impact of oligocarbonates in K-KPF6 on K2Mn[Fe(CN)6] positive electrodes. The interactions between the decomposition products and the electrodes were further evaluated using density functional theory calculations. Full cell measurements using K-KPF6:KFSA showed an improved energy density and capacity retention of 78% after 500 cycles compared with an untreated electrolyte (72%). Hard X-ray photoelectron spectroscopy indicated the incorporation of the FSA-derived structures into the solid electrolyte interphase at graphite, which was not observed in K metal-free cells. Overall, this work indicates further complexities to consider in KIB measurements and suggests the potential application of decomposition products as electrolyte additives.

In situ Observation of Evolving H2 and Solid Electrolyte Interphase Development at Potassium Insertion Materials within Highly Concentrated Aqueous Electrolytes.

The solid-electrolyte interphase (SEI) is key to stable, high voltage lithium-ion batteries (LIBs) as a protective barrier that prevents electrolyte decomposition. The SEI is thought to play a similar role in highly concentrated water-in-salt electrolytes (WISEs) for emerging aqueous batteries, but its properties remain unknown. In this work, we utilized advanced scanning electrochemical microscopy (SECM) and operando electrochemical mass spectrometry (OEMS) techniques to gain deeper insight into the SEI that occurs within highly concentrated WISEs. As a model, we focus on a 55 mol/kg K(FSA)0.6 (OTf)0.4 electrolyte and a 3,4,9,10-perylenetetracarboxylic diimide negative electrode. For the first time, our work showed distinctly passivating structures with slow apparent electron transfer rates alike to the SEI found in LIBs. In situ analyses indicated stable passivating structures when PTCDI was stepped to low potentials (≈-1.3 V vs. Ag/AgCl). However, the observed SEI was discontinuous at the surface and H2 evolution occurred as the electrode reached more extreme potentials. OEMS measurements further confirmed a shift in the evolution of detectable H2 from -0.9 V to <-1.4 V vs. Ag/AgCl when changing from dilute to concentrated electrolytes. In all, our work shows a combined approach of traditional battery measurements with in situ analyses for improving characterization of other unknown SEI structures.

Sulfated Alginate as an Effective Polymer Binder for High-Voltage LiNi0.5Mn1.5O4 Electrodes in Lithium-Ion Batteries.

Although the increasing demand for high-energy-density lithium-ion batteries (LIBs) has inspired extensive research on high-voltage cathode materials, such as LiNi0.5Mn1.5O4 (LNMO), their commercialization is hindered by problems associated with the decomposition of common carbonate solvent-based electrolytes at elevated voltages. To address these problems, we prepared high-voltage LNMO composite electrodes using five polymer binders (two sulfated and two nonsulfated alginate binders and a poly(vinylidene fluoride) conventional binder) and compared their electrochemical performances at ∼5 V vs Li/Li+. The effects of binder type on electrode performance were probed by analyzing cycled electrodes using soft/hard X-ray photoelectron spectroscopy and scanning transmission electron microscopy. The best-performing sulfated binder, sulfated alginate, uniformly covers the surface of LNMO and increased its affinity for the electrolyte. The electrolyte decomposition products generated in the initial charge-discharge cycle on the alginate-covered electrode participated in the formation of a protective passivation layer that suppressed further decomposition during subsequent cycles, resulting in enhanced cycling and rate performances. The results of this study provide a basis for the cost-effective and technically undemanding fabrication of high-energy-density LIBs.

Active material and interphase structures governing performance in sodium and potassium ion batteries.

Development of energy storage systems is a topic of broad societal and economic relevance, and lithium ion batteries (LIBs) are currently the most advanced electrochemical energy storage systems. However, concerns on the scarcity of lithium sources and consequently the expected price increase have driven the development of alternative energy storage systems beyond LIBs. In the search for sustainable and cost-effective technologies, sodium ion batteries (SIBs) and potassium ion batteries (PIBs) have attracted considerable attention. Here, a comprehensive review of ongoing studies on electrode materials for SIBs and PIBs is provided in comparison to those for LIBs, which include layered oxides, polyanion compounds and Prussian blue analogues for positive electrode materials, and carbon-based and alloy materials for negative electrode materials. The importance of the crystal structure for electrode materials is discussed with an emphasis placed on intrinsic and dynamic structural properties and electrochemistry associated with alkali metal ions. The key challenges for electrode materials as well as the interface/interphase between the electrolyte and electrode materials, and the corresponding strategies are also examined. The discussion and insights presented in this review can serve as a guide regarding where future investigations of SIBs and PIBs will be directed.

Na Diffusion in Hard Carbon Studied with Positive Muon Spin Rotation and Relaxation.

The diffusive nature of Na+ in Na-inserted hard carbon (C x Na), which is the most common anode material for a Na-ion battery, was studied with a positive muon spin rotation and relaxation (µ+SR) technique in transverse, zero, and longitudinal magnetic fields (TF, ZF, and LF) at temperatures between 50 and 375 K, where TF (LF) denotes the applied magnetic field perpendicular (parallel) to the initial muon spin polarization. At temperatures above 150 K, TF-µ+SR measurements showed a distinct motional narrowing behavior, implying that Na+ begins to diffuse above 150 K. The presence of two different muon sites in C x Na was confirmed with ZF- and LF-µ+SR measurements; one is in the Na-inserted graphene layer, and the other is in the Na-vacant graphene layer adjacent to the Na-inserted graphene layer. A systematic increase in the field fluctuation rate (ν) with increasing temperature also evidenced a thermally activated Na diffusion, particularly above 150 K. Assuming the two-dimensional diffusion of Na+ in the graphene layers, the self-diffusion coefficient of Na+ (D Na J) at 300 K was estimated to be 2.5 × 10-11 cm2/s with a thermal activation energy of 39(7) meV.

Solvate electrolytes for Li and Na batteries: structures, transport properties, and electrochemistry.

Polar solvents dissolve Li and Na salts at high concentrations and are used as electrolyte solutions for batteries. The solvents interact strongly with the alkali metal cations to form complexes in the solution. The activity (concentration) of the uncoordinated solvent decreases as the salt concentration is increased. At extremely high salt concentrations, all the solvent molecules are involved in the coordination of the ions and form the solvates of the salts. In this article, we review the structures, transport properties, and electrochemistry of Li/Na salt solvates. In molten solvates, the activity of the uncoordinated solvent is negligible; this is the main origin of their peculiar characteristics, such as high thermal stability, wide electrochemical window, and unique ion transport. In addition, the solvent activity greatly influences the electrochemical reactions in Li/Na batteries. We highlight the attractive features of molten solvates as promising electrolytes for next-generation batteries.

Structural Effects of Solvents on Li-Ion-Hopping Conduction in Highly Concentrated LiBF4/Sulfone Solutions.

Li-ion-hopping conduction is known to occur in certain highly concentrated electrolytes, and this conduction mode is effective for achieving lithium batteries with high rate capabilities. Herein, we investigated the effects of the solvent structure on the hopping conduction of Li ions in highly concentrated LiBF4/sulfone electrolytes. Raman spectroscopy revealed that a Li+ ion forms complexes with sulfone and anions, and contact ion pairs and ionic aggregates are formed in the highly concentrated electrolytes. Li+ exchanges ligands (sulfone and BF4-) rapidly to produce unusual hopping conduction in highly concentrated electrolytes. The structure of the solvent significantly influences the hopping conduction process. We measured the self-diffusion coefficients of Li+ (DLi), anions (Danion), and sulfone solvents (Dsol) in electrolytes. The ratio of the self-diffusion coefficients (DLi/Dsol) tended to be higher for cyclic sulfones (sulfolane and 3-methylsulfolane) than for acyclic sulfones, which suggests that cyclic sulfone molecules facilitate Li-ion hopping. The hopping conduction increases the Li+-transference number (tLi+abc) under anion-blocking conditions, and tLi+abc of [LiBF4]/[cyclic sulfone] = 1/2 is as high as 0.8.

Transport Properties of Flexible Composite Electrolytes Composed of Li1.5Al0.5Ti1.5(PO4)3 and a Poly(vinylidene fluoride-co-hexafluoropropylene) Gel Containing a Highly Concentrated Li[N(SO2CF3)2]/Sulfolane Electrolyte.

Flexible solid-state electrolyte membranes are beneficial for feasible construction of solid-state batteries. In this study, a flexible composite electrolyte was prepared by combining a Li+-ion-conducting solid electrolyte Li1.5Al0.5Ti1.5(PO4)3 (LATP) and a poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) gel containing a highly concentrated electrolyte of Li[N(SO2CF3)2] (LiTFSA)/sulfolane using a solution casting method. We successfully demonstrated the operation of Li/LiCoO2 cells with the composite electrolyte; however, the rate capability of the cell degraded with increasing LATP content. We investigated the Li-ion transport properties of the composite electrolyte and found that the gel formed a continuous phase in the composite electrolyte and Li-ion conduction mainly occurred in the gel phase. Solid-state 6Li magic-angle spinning NMR measurements for LATP treated with the 6LiTFSA/sulfolane electrolyte suggested that the Li+-ion exchange occurred at the interface between LATP and 6LiTFSA/sulfolane. However, the kinetics of Li+ transfer at the interface between LATP and the PVDF-HFP gel was relatively slow. The interfacial resistance of LATP/gel was evaluated to be 67 Ω·cm2 at 30 °C, and the activation energy for interfacial Li+ transfer was 39 kJ mol-1. The large interfacial resistance caused the less contribution of LATP particles to the Li-ion conduction in the composite electrolyte.

100 m Long Thermally Drawn Supercapacitor Fibers with Applications to 3D Printing and Textiles.

Supercapacitor fibers, with short charging times, long cycle lifespans, and high power densities, hold promise for powering flexible fabric-based electronics. To date, however, only short lengths of functioning fiber supercapacitors have been produced. The primary goal of this study is to introduce a supercapacitor fiber that addresses the remaining challenges of scalability, flexibility, cladding impermeability, and performance at length. This is achieved through a top-down fabrication method in which a macroscale preform is thermally drawn into a fully functional energy-storage fiber. The preform consists of five components: thermally reversible porous electrode and electrolyte gels; conductive polymer and copper microwire current collectors; and an encapsulating hermetic cladding. This process produces 100 m of continuous functional supercapacitor fiber, orders of magnitude longer than any previously reported. In addition to flexibility (5 mm radius of curvature), moisture resistance (100 washing cycles), and strength (68 MPa), these fibers have an energy density of 306 µWh cm-2 at 3.0 V and ≈100% capacitance retention over 13 000 cycles at 1.6 V. To demonstrate the utility of this fiber, it is machine-woven and used as filament for 3D printing.

Quantitative Mapping of Molecular Substituents to Macroscopic Properties Enables Predictive Design of Oligoethylene Glycol-Based Lithium Electrolytes.

Molecular details often dictate the macroscopic properties of materials, yet due to their vastly different length scales, relationships between molecular structure and bulk properties can be difficult to predict a priori, requiring Edisonian optimizations and preventing rational design. Here, we introduce an easy-to-execute strategy based on linear free energy relationships (LFERs) that enables quantitative correlation and prediction of how molecular modifications, i.e., substituents, impact the ensemble properties of materials. First, we developed substituent parameters based on inexpensive, DFT-computed energetics of elementary pairwise interactions between a given substituent and other constant components of the material. These substituent parameters were then used as inputs to regression analyses of experimentally measured bulk properties, generating a predictive statistical model. We applied this approach to a widely studied class of electrolyte materials: oligo-ethylene glycol (OEG)-LiTFSI mixtures; the resulting model enables elucidation of fundamental physical principles that govern the properties of these electrolytes and also enables prediction of the properties of novel, improved OEG-LiTFSI-based electrolytes. The framework presented here for using context-specific substituent parameters will potentially enhance the throughput of screening new molecular designs for next-generation energy storage devices and other materials-oriented contexts where classical substituent parameters (e.g., Hammett parameters) may not be available or effective.

Highly concentrated LiN(SO2CF3)2/dinitrile electrolytes: Liquid structures, transport properties, and electrochemistry.

Liquid structures, transport properties, and electrochemical properties of binary mixtures of lithium bis(trifluoromethanesulfonyl)amide (LiTFSA) and dinitrile solvents [succinonitrile (SN), glutaronitrile (GN), and adiponitrile (ADN)] were investigated. In the LiTFSA/SN and LiTFSA/ADN systems, the stable crystalline solvates of LiTFSA-(SN)1.5 [melting point (Tm): 59 °C] and LiTFSA-(ADN)1.5 (Tm: 50 °C) were formed, respectively. In contrast, the LiTFSA/GN mixtures of a wide range of compositions were found to be glass-forming liquids at room temperature. Raman spectroscopy of LiTFSA/GN liquid mixtures revealed that increasing the LiTFSA concentration results in the formation of the solvent-bridged network structure Li+-GN-Li+. In addition, the considerable formation of contact ion pairs and ionic aggregates was observed in highly concentrated electrolytes. In the liquids, the Li+ ion dynamically exchanged ligands (GN and TFSA) and higher LiTFSA concentrations led to an increase in the ratio of the self-diffusion coefficients of Li+ and TFSA-, DLi/DTFSA, as determined by pulsed field gradient NMR spectroscopy. The Li+ transference number (tLi+ ) of the [LiTFSA]/[GN] = 1/1.5 electrolyte in an electrochemical cell under anion-blocking conditions was estimated to be as high as 0.74. Furthermore, electrochemical measurements revealed that the reductive stability of the LiTFSA/GN electrolyte increases with increasing LiTFSA concentration. A [LiTFSA]/[GN] = 1/1.5 electrolyte is stable against the Li metal electrode, provided that the polarization is relatively small. Owing to high tLi+ , a Li-S battery with the [LiTFSA]/[GN] = 1/1.5 electrolyte showed a high rate discharge capability despite its low ionic conductivity (0.21 mS cm-1) at room temperature.

Enhanced Cycling Performance of Ni-Rich Positive Electrodes (NMC) in Li-Ion Batteries by Reducing Electrolyte Free-Solvent Activity.

The interfacial (electro)chemical reactions between electrode and electrolyte dictate the cycling stability of Li-ion batteries. Previous experimental and computational results have shown that replacing Mn and Co with Ni in layered LiNixMnyCo1-x-yO2 (NMC) positive electrodes promotes the dehydrogenation of carbonate-based electrolytes on the oxide surface, which generates protic species to decompose LiPF6 in the electrolyte. In this study, we utilized this understanding to stabilize LiNi0.8Mn0.1Co0.1O2 (NMC811) by decreasing free-solvent activity in the electrolyte through controlling salt concentration and salt dissociativity. Infrared spectroscopy revealed that highly concentrated electrolytes with low free-solvent activity had no dehydrogenation of ethylene carbonate, which could be attributed to slow kinetics of dissociative adsorption of Li+-coordinated solvents on oxide surfaces. The increased stability of the concentrated electrolyte against solvent dehydrogenation gave rise to high capacity retention of NMC811 with capacities greater than 150 mA h g-1 (77% retention) after 500 cycles without oxide-coating and Ni-concentration gradients or electrolyte additives.

Molecular Design of Stable Sulfamide- and Sulfonamide-based Electrolytes for Aprotic Li-O2 Batteries.

Electrolyte instability is one of the most challenging impediments to enabling Lithium-Oxygen (Li-O2) batteries for practical use. The use of physical organic chemistry principles to rationally design new molecular components may enable the discovery of electrolytes with stability profiles that cannot be achieved with existing formulations. Here, we report on the development of sulfamide- and sulfonamide-based small molecules that are liquids at room temperature, capable of dissolving reasonably high concentration of Li salts (e.g., LiTFSI), and are exceptionally stable under the harsh chemical and electrochemical conditions of aprotic Li-O2 batteries. In particular, N,N-dimethyl-trifluoromethanesulfonamide was found to be highly resistant to chemical degradation by peroxide and superoxide, stable against electrochemical oxidation up to 4.5 VLi, and stable for > 90 cycles in a Li-O2 cell when cycled at < 4.2 VLi. This study provides guiding principles for the development of next-generation electrolyte components based on sulfamides and sulfonamides.

Three-Dimensionally Hierarchical Ni/Ni3S2/S Cathode for Lithium-Sulfur Battery.

Lithium-sulfur (Li-S) batteries have attracted interest as a promising energy-storage technology due to their overwhelming advantages such as high energy density and low cost. However, their commercial success is impeded by deterioration of sulfur utilization, significant capacity fade, and poor cycle life, which are principally originated from the severe shuttle effect in relation to the dissolution and migration of lithium polysulfides. Herein, we proposed an effective and facile strategy to anchor the polysulfides and improve sulfur loading by constructing a three-dimensionally hierarchical Ni/Ni3S2/S cathode. This self-supported hybrid architecture is sequentially fabricated by the partial sulfurization of Ni foam by a mild hydrothermal process, followed by physical loading of elemental sulfur. The incorporation of Ni3S2, with high electronic conductivity and strong polysulfide adsorption capability, can not only empower the cathode to alleviate the shuttle effect, but also afford a favorable electrochemical environment with lower interfacial resistance, which could facilitate the redox kinetics of the anchored polysulfides. Consequently, the obtained Ni/Ni3S2/S cathode with a sulfur loading of ∼4.0 mg/cm2 demonstrated excellent electrochemical characteristics. For example, at high current density of 4 mA/cm2, this thick cathode demonstrated a discharge capacity of 441 mAh/g at the 150th cycle.

Amphoteric water as acid and base for protic ionic liquids and their electrochemical activity when used as fuel cell electrolytes.

Amphoteric water was mixed with equimolar amounts of a super-strong acid, trifluoromethanesulfonic acid (TfOH), and a super-strong base, 1,8-diazabicyclo[5.4.0]-7-undecene (DBU). Bulk physicochemical and electrochemical properties of the mixtures were compared with those of the best ever reported protic ionic liquid (PIL), diethylmethylammonium trifluoromethanesulfonate ([dema][TfO]), which has excellent physicochemical properties as a fuel cell electrolyte. The acidic mixture ([H3O][TfO]) behaved as a protic ionic liquid, while the basic mixture ([DBU]OH) showed incomplete proton transfer. The Walden plot indicated that [H3O][TfO] behaves as a good PIL, similar to [dema][TfO], whereas [DBU]OH behaves as a poor PIL. [H3O][TfO] showed excellent H2/O2 fuel cell performance at 80 °C; however, the performance deteriorated as the bulk water content increased, because of the retardation of the electrode kinetics due to the oxidation of Pt in the presence of bulk water. On the other hand, [DBU]OH exhibited very poor performance possibly because of the existence of neutral species in the system.

Stability of Glyme Solvate Ionic Liquid as an Electrolyte for Rechargeable Li-O2 Batteries.

A solvate ionic liquid (SIL) was compared with a conventional organic solvent for the electrolyte of the Li-O2 battery. An equimolar mixture of triglyme (G3) and lithium bis(trifluoromethanesulfonyl)amide (Li[TFSA]), and a G3/Li[TFSA] mixture containing excess glyme were chosen as the SIL and the conventional electrolyte, respectively. Charge behavior and accompanying gas evolution of the two electrolytes was investigated by electrochemical mass spectrometry (ECMS). From the linear sweep voltammetry performed on an as-prepared cell, we demonstrate that the SIL has a higher oxidative stability than the conventional electrolyte and, furthermore, offers the advantage of lower volatility, which would benefit an open-type lithium-O2 cell design. Moreover, CO2 evolution during galvanostatic charge was less in the SIL, which implies less side reaction. However, O2 evolution during charge did not reach the theoretical value in either of the two electrolytes. Several mass spectral fragments were generated during the charge process, which provided evidence for side reactions of glyme-based electrolytes. We further relate the difference in observed discharge product morphology for these electrolytes to the solubility of the superoxide intermediate, determined by rotating ring disk electrode (RRDE) measurements.

One-pot pyrolysis of lithium sulfate and graphene nanoplatelet aggregates: in situ formed Li2S/graphene composite for lithium-sulfur batteries.

Lithium sulfide (Li2S) as a cathodic material in Li-S batteries can not only deliver a high theoretical specific capacity of 1166 mA h g(-1), but also is essential for batteries using Li-free anode materials such as silicon and graphite. Various efforts have been made to synthesize a highly efficient Li2S-carbon composite; however, the electronically and ionically insulating nature and high melting point of Li2S strongly complicate the synthetic procedures, making it difficult to realize the expected capacity. Herein, a very simple method is proposed to prepare Li2S/graphene composites by one-pot pyrolysis of a mixture of graphene nanoplatelet aggregates (GNAs) and low-cost lithium sulfate (Li2SO4). For the first time, the entire pyrolysis process is clarified by thermogravimetry-mass spectrometry, wherein GNAs were found to partly serve as a carbon source to reduce Li2SO4 to Li2S, while the remaining GNAs formed thin graphene sheets as a result of this in situ etching, as a highly conductive host can immobilize the generated Li2S by intimate contact. Consequently, the obtained Li2S/graphene composite, combined with a Li2Sx-insoluble (x = 4-8) electrolyte developed by our group, exhibits excellent electrochemical behavior for Li-S batteries.

Li(+) solvation in glyme-Li salt solvate ionic liquids.

Certain molten complexes of Li salts and solvents can be regarded as ionic liquids. In this study, the local structure of Li(+) ions in equimolar mixtures ([Li(glyme)]X) of glymes (G3: triglyme and G4: tetraglyme) and Li salts (LiX: lithium bis(trifluoromethanesulfonyl)amide (Li[TFSA]), lithium bis(pentafluoroethanesulfonyl)amide (Li[BETI]), lithium trifluoromethanesulfonate (Li[OTf]), LiBF4, LiClO4, LiNO3, and lithium trifluoroacetate (Li[TFA])) was investigated to discriminate between solvate ionic liquids and concentrated solutions. Raman spectra and ab initio molecular orbital calculations have shown that the glyme molecules adopt a crown-ether like conformation to form a monomeric [Li(glyme)](+) in the molten state. Further, Raman spectroscopic analysis allowed us to estimate the fraction of the free glyme in [Li(glyme)]X. The amount of free glyme was estimated to be a few percent in [Li(glyme)]X with perfluorosulfonylamide type anions, and thereby could be regarded as solvate ionic liquids. Other equimolar mixtures of [Li(glyme)]X were found to contain a considerable amount of free glyme, and they were categorized as traditional concentrated solutions. The activity of Li(+) in the glyme-Li salt mixtures was also evaluated by measuring the electrode potential of Li/Li(+) as a function of concentration, by using concentration cells against a reference electrode. At a higher concentration of Li salt, the amount of free glyme diminishes and affects the electrode reaction, leading to a drastic increase in the electrode potential. Unlike conventional electrolytes (dilute and concentrated solutions), the significantly high electrode potential found in the solvate ILs indicates that the solvation of Li(+) by the glyme forms stable and discrete solvate ions ([Li(glyme)](+)) in the molten state. This anomalous Li(+) solvation may have a great impact on the electrode reactions in Li batteries.