Differences in Oligomerization of the SARS-CoV-2 Envelope Protein, Poliovirus VP4, and HIV Vpu.

Viroporins constitute a class of viral membrane proteins with diverse roles in the viral life cycle. They can self-assemble and form pores within the bilayer that transport substrates, such as ions and genetic material, that are critical to the viral infection cycle. However, there is little known about the oligomeric state of most viroporins. Here, we use native mass spectrometry in detergent micelles to uncover the patterns of oligomerization of the full-length SARS-CoV-2 envelope (E) protein, poliovirus VP4, and HIV Vpu. Our data suggest that the E protein is a specific dimer, VP4 is exclusively monomeric, and Vpu assembles into a polydisperse mixture of oligomers under these conditions. Overall, these results revealed the diversity in the oligomerization of viroporins, which has implications for the mechanisms of their biological functions as well as their potential as therapeutic targets.

Rapid Biomolecular Trifluoromethylation Using Cationic Aromatic Sulfonate Esters as Visible-Light-Triggered Radical Photocages.

Described here is a photodecaging approach to radical trifluoromethylation of biomolecules. This was accomplished by designing a quinolinium sulfonate ester that, upon absorption of visible light, achieves decaging via photolysis of the sulfonate ester to ultimately liberate free trifluoromethyl radicals that are trapped by π-nucleophiles in biomolecules. This photodecaging process enables protein and protein-interaction mapping experiments using trifluoromethyl radicals that require only 1 s reaction times and low photocage concentrations. In these experiments, aromatic side chains are labeled in an environmentally dependent fashion, with selectivity observed for tryptophan (Trp), followed by histidine (His) and tyrosine (Tyr). Scalable peptide trifluoromethylation through photodecaging is also demonstrated, where bespoke peptides harboring trifluoromethyl groups at tryptophan residues can be synthesized with 5-7 min reaction times and good yields.

Differences in Oligomerization of the SARS-CoV-2 Envelope Protein, Poliovirus VP4, and HIV Vpu.

Viroporins constitute a class of viral membrane proteins with diverse roles in the viral life cycle. They can self-assemble and form pores within the bilayer that transport substrates, such as ions and genetic material, that are critical to the viral infection cycle. However, there is little known about the oligomeric state of most viroporins. Here, we use native mass spectrometry (MS) in detergent micelles to uncover the patterns of oligomerization of the full-length SARS-CoV-2 envelope (E) protein, poliovirus VP4, and HIV Vpu. Our data suggest that the E protein is a specific dimer, VP4 is exclusively monomeric, and Vpu assembles into a polydisperse mixture of oligomers under these conditions. Overall, these results revealed the diversity in the oligomerization of viroporins, which has implications for mechanisms of their biological functions as well as their potential as therapeutic targets.

Donor-Acceptor Pyridinium Salts for Photo-Induced Electron-Transfer-Driven Modification of Tryptophan in Peptides, Proteins, and Proteomes Using Visible Light.

Tryptophan (Trp) plays a variety of critical functional roles in protein biochemistry; however, owing to its low natural frequency and poor nucleophilicity, the design of effective methods for both single protein bioconjugation at Trp as well as for in situ chemoproteomic profiling remains a challenge. Here, we report a method for covalent Trp modification that is suitable for both scenarios by invoking photo-induced electron transfer (PET) as a means of driving efficient reactivity. We have engineered biaryl N-carbamoyl pyridinium salts that possess a donor-acceptor relationship that enables optical triggering with visible light whilst simultaneously attenuating the probe's photo-oxidation potential in order to prevent photodegradation. This probe was assayed against a small bank of eight peptides and proteins, where it was found that micromolar concentrations of the probe and short irradiation times (10-60 min) with violet light enabled efficient reactivity toward surface exposed Trp residues. The carbamate transferring group can be used to transfer useful functional groups to proteins including affinity tags and click handles. DFT calculations and other mechanistic analyses reveal correlations between excited state lifetimes, relative fluorescence quantum yields, and chemical reactivity. Biotinylated and azide-functionalized pyridinium salts were used for Trp profiling in HEK293T lysates and in situ in HEK293T cells using 440 nm LED irradiation. Peptide-level enrichment from live cell labeling experiments identified 290 Trp modifications, with 82% selectivity for Trp modification over other π-amino acids, demonstrating the ability of this method to identify and quantify reactive Trp residues from live cells.

Photochemical protein modification in complex biological environments: recent advances and considerations for future chemical methods development.

The development of organic reactions that covalently modify biological matter in complex biological mixtures has become an invaluable asset in drug discovery. Out of the techniques developed to date, optically controlled chemistries are of particular utility owing to both the spatiotemporal control afforded by optical control as well as the impressive array of transformations that are driven by the highly reactive intermediates generated upon excitation. This minireview discusses recent advances in the development of photochemical reactions for use in complex mixtures and highlights key considerations for future photochemical reaction designs.

Targeting Tryptophan for Tagging Through Photo-induced Electron Transfer.

The chemical modification of tryptophan (Trp) has been the subject of interest for nearly 100 years, yet the development modification conditions that exploit Trp's inherent photolability have remained elusive. In this perspective, we discuss our recently reported method for Tryptophan (Trp) photobioconjugation that uses N -carbamoyl pyridinium salts to engage Trp in photo-induced electron transfer. We detail our inspiration and rationale as well as place our report in the context of select prior art in the field.

Selective Modification of Tryptophan Residues in Peptides and Proteins Using a Biomimetic Electron Transfer Process.

We report here a photochemical process for the selective modification of tryptophan (Trp) residues in peptides and small proteins using electron-responsive N-carbamoylpyridinium salts and UV-B light. Preliminary mechanistic experiments suggest that the photoconjugation process proceeds through photoinduced electron transfer (PET) between Trp and the pyridinium salt, followed by fragmentation of the pyridinium N-N bond and concomitant transfer of this group to Trp. The reaction displays excellent site selectivity for Trp and is tolerant to other, redox-active amino-acid residues. Moreover, the reaction proceeds in pure aqueous conditions without the requirement of organic cosolvents or photocatalysts, is enhanced by glutathione, and operates efficiently over a wide range of peptide concentrations (10-700 µM). The scope of the process was explored through the labeling of 6-Trp-containing peptides and proteins ranging from 1 to 14 kDa. We demonstrate the versatility of the N-carbamoylpyridinium salt both by tuning the electrochemical and photochemical properties of the pyridinium scaffold to enable challenging photoconjugation reactions and by using the carbamoyl moiety to tether a plethora of productive functional groups, including reactive handles, purification tags, and removable protecting groups.

Dual-Reactivity trans-Cyclooctenol Probes for Sulfenylation in Live Cells Enable Temporal Control via Bioorthogonal Quenching.

Sulfenylation (RSH → RSOH) is a post-translational protein modification associated with cellular mechanisms for signal transduction and the regulation of reactive oxygen species. Protein sulfenic acids are challenging to identify and study due to their electrophilic and transient nature. Described here are sulfenic acid modifying trans-cycloocten-5-ol (SAM-TCO) probes for labeling sulfenic acid functionality in live cells. These probes enable a new mode of capturing sulfenic acids via transannular thioetherification, whereas "ordinary" trans-cyclooctenes react only slowly with sulfenic acids. SAM-TCOs combine with sulfenic acid forms of a model peptide and proteins to form stable adducts. Analogously, SAM-TCO with the selenenic acid form of a model protein leads to a selenoetherification product. Control experiments illustrate the need for the transannulation process coupled with the activated trans-cycloalkene functionality. Bioorthogonal quenching of excess unreacted SAM-TCOs with tetrazines in live cells provides both temporal control and a means of preventing artifacts caused by cellular-lysis. A SAM-TCO biotin conjugate was used to label protein sulfenic acids in live cells, and subsequent quenching by tetrazine prevented further labeling even under harshly oxidizing conditions. A cell-based proteomic study validates the ability of SAM-TCO probes to identify and quantify known sulfenic acid redox proteins as well as targets not captured by dimedone-based probes.

A protein functionalization platform based on selective reactions at methionine residues.

Nature has a remarkable ability to carry out site-selective post-translational modification of proteins, therefore enabling a marked increase in their functional diversity1. Inspired by this, chemical tools have been developed for the synthetic manipulation of protein structure and function, and have become essential to the continued advancement of chemical biology, molecular biology and medicine. However, the number of chemical transformations that are suitable for effective protein functionalization is limited, because the stringent demands inherent to biological systems preclude the applicability of many potential processes2. These chemical transformations often need to be selective at a single site on a protein, proceed with very fast reaction rates, operate under biologically ambient conditions and should provide homogeneous products with near-perfect conversion2-7. Although many bioconjugation methods exist at cysteine, lysine and tyrosine, a method targeting a less-explored amino acid would considerably expand the protein functionalization toolbox. Here we report the development of a multifaceted approach to protein functionalization based on chemoselective labelling at methionine residues. By exploiting the electrophilic reactivity of a bespoke hypervalent iodine reagent, the S-Me group in the side chain of methionine can be targeted. The bioconjugation reaction is fast, selective, operates at low-micromolar concentrations and is complementary to existing bioconjugation strategies. Moreover, it produces a protein conjugate that is itself a high-energy intermediate with reactive properties and can serve as a platform for the development of secondary, visible-light-mediated bioorthogonal protein functionalization processes. The merger of these approaches provides a versatile platform for the development of distinct transformations that deliver information-rich protein conjugates directly from the native biomacromolecules.

Multiplexed identification, quantification and genotyping of infectious agents using a semiconductor biochip.

The emergence of pathogens resistant to existing antimicrobial drugs is a growing worldwide health crisis that threatens a return to the pre-antibiotic era. To decrease the overuse of antibiotics, molecular diagnostics systems are needed that can rapidly identify pathogens in a clinical sample and determine the presence of mutations that confer drug resistance at the point of care. We developed a fully integrated, miniaturized semiconductor biochip and closed-tube detection chemistry that performs multiplex nucleic acid amplification and sequence analysis. The approach had a high dynamic range of quantification of microbial load and was able to perform comprehensive mutation analysis on up to 1,000 sequences or strands simultaneously in <2 h. We detected and quantified multiple DNA and RNA respiratory viruses in clinical samples with complete concordance to a commercially available test. We also identified 54 drug-resistance-associated mutations that were present in six genes of Mycobacterium tuberculosis, all of which were confirmed by next-generation sequencing.

Effect of atmospheric anisoplanatism on earth-to-satellite time transfer over laser communication links.

The need for an accurate time reference on orbiting platforms motivates study of time transfer via free-space optical communication links. The impact of atmospheric turbulence on earth-to-satellite optical time transfer has not been fully characterized, however. We analyze limits to two-way laser time transfer accuracy posed by anisoplanatic non-reciprocity between uplink and downlink. We show that despite limited reciprocity, two-way time transfer can still achieve sub-picosecond accuracy in realistic propagation scenarios over a single satellite visibility period.

Biosynthesis of the C15-acetogenin laurepoxide may involve bromine-induced skeletal rearrangement of a Δ4-oxocene precursor.

An electrophilic bromine catalyzed skeletal rearrangement of an Δ4-oxocene to an epoxy furan has been described. This skeletal rearrangement suggests a plausible mechanism for the biosynthesis of the C15-acetogenin laurepoxide.

Enantioselective synthesis of cyclobutanes via sequential Rh-catalyzed bicyclobutanation/Cu-catalyzed homoconjugate addition.

Enantiomerically enriched cyclobutanes are constructed by a three-component process in which t-butyl (E)-2-diazo-5-arylpent-4-enoates are treated with Rh2(S-NTTL)4 to provide enantiomerically enriched bicyclobutanes, which can subsequently engage in homoconjugate addition/enolate trapping sequence to give densely functionalized cyclobutanes with high diastereoselectivity. This three-component, two-catalyst procedure can be carried out in a single flask. Rh2(S-NTTL)4-catalyzed reaction of t-butyl (Z)-2-diazo-5-phenylpent-4-enoate gives the Büchner cyclization product in excellent enantioselectivity.

Genetically encoded tetrazine amino acid directs rapid site-specific in vivo bioorthogonal ligation with trans-cyclooctenes.

Bioorthogonal ligation methods with improved reaction rates and less obtrusive components are needed for site-specifically labeling proteins without catalysts. Currently no general method exists for in vivo site-specific labeling of proteins that combines fast reaction rate with stable, nontoxic, and chemoselective reagents. To overcome these limitations, we have developed a tetrazine-containing amino acid, 1, that is stable inside living cells. We have site-specifically genetically encoded this unique amino acid in response to an amber codon allowing a single 1 to be placed at any location in a protein. We have demonstrated that protein containing 1 can be ligated to a conformationally strained trans-cyclooctene in vitro and in vivo with reaction rates significantly faster than most commonly used labeling methods.

Diels-Alder cycloaddition for fluorophore targeting to specific proteins inside living cells.

The inverse-electron-demand Diels-Alder cycloaddition between trans-cyclooctenes and tetrazines is biocompatible and exceptionally fast. We utilized this chemistry for site-specific fluorescence labeling of proteins on the cell surface and inside living mammalian cells by a two-step protocol. Escherichia coli lipoic acid ligase site-specifically ligates a trans-cyclooctene derivative onto a protein of interest in the first step, followed by chemoselective derivatization with a tetrazine-fluorophore conjugate in the second step. On the cell surface, this labeling was fluorogenic and highly sensitive. Inside the cell, we achieved specific labeling of cytoskeletal proteins with green and red fluorophores. By incorporating the Diels-Alder cycloaddition, we have broadened the panel of fluorophores that can be targeted by lipoic acid ligase.

Design and synthesis of highly reactive dienophiles for the tetrazine-trans-cyclooctene ligation.

Computation was used to design a trans-cyclooctene derivative that displays enhanced reactivity in the tetrazine-trans-cycloctene ligation. The optimized derivative is an (E)-bicyclo[6.1.0]non-4-ene with a cis-ring fusion, in which the eight-membered ring is forced to adopt a highly strained 'half-chair' conformation. Toward 3,6-dipyridyl-s-tetrazine in MeOH at 25 °C, the strained derivative is 19 and 27 times more reactive than the parent trans-cyclooctene and 4E-cyclooct-4-enol, respectively. Toward 3,6-diphenyl-s-tetrazine in MeOH at 25 °C, the strained derivative is 160 times more reactive than the parent trans-cyclooctene.

Total Synthesis of Hyacinthacine A2: Stereocontrolled 5-aza-cyclooctene Photoisomerization and Transannular Hydroamination with Planar-to-Point Chirality Transfer.

The total synthesis of hyacinthacine A2 is reported via a novel transannular hydroamination in which planar chirality of a 5-aza-trans-cyclooctene precursor is transferred to point chirality in the product. Key to the success of this strategy was the development of a method for establishing absolute planar chirality via stereocontrolled photoisomerization of a 5-aza-cis-cyclooctene. This was accomplished by constructing a 5-aza-cis-cyclooctene precursor with a trans-fused acetonide. The improved diastereoselectivity observed upon photoisomerization of this derivative is attributed to the conformational strain of the eight-membered ring in the minor diastereomer.

Unusually reactive and selective carbonyl ylides for three-component cycloaddition reactions.

Conditions are described for the Rh-catalyzed formation of highly functionalized dihydro- and tetrahydrofuran products via three-component reactions of aldehydes, alpha-alkyl-alpha-diazoesters, and dipolarophiles. The alkyl-substituted carbonyl ylides that are generated in this fashion are highly reactive in cycloaddition reactions and display a scope of reactivity that is much broader than the three-component reactions of carbonyl ylides derived from ethyl diazoacetate or alpha-aryl-alpha-diazoesters. The reactions of alkyl-substituted carbonyl ylides proceed with high regioselectivity and diastereoselectivity that are rationalized in terms of an asynchronous, endo-selective transition state.

Sterically bulky tris(triazolyl)borate ligands as water-soluble analogues of tris(pyrazolyl)borate.

The recently synthesized 3-tert-butyl-5-methyl-1,2,4-triazole reacted with KBH4 to give the new potassium tris(3-tert-butyl-5-methyl-1,2,4-triazolyl)borate K(Ttz(tBu,Me)) ligand. Ttz(tBu,Me) formed a four-coordinate (Ttz(tBu,Me))CoCl complex and five-coordinate (Ttz(tBu,Me))CoNO3 and (Ttz(tBu,Me))ZnOAc complexes. When these complexes were compared to their Tp(tBu,Me) analogues, it was found that Ttz(tBu,Me) resulted in negligible steric differences. K(Ttz(tBu,Me)) is more water-soluble than K(Tp(tBu,Me)), so bulky tris(triazolyl)borate ligands should lead to functional models for enzyme active sites in an aqueous environment and the creation of water-soluble analogues of Tp catalysts.

Synthesis of zinc, copper, nickel, cobalt, and iron complexes using tris(pyrazolyl)methane sulfonate ligands: a structural model for N,N,O binding in metalloenzymes.

Ligands of intermediate steric bulk were designed to mimic metalloenzymes with histidine and carboxlyate binding sites. The reaction between tris(3-isopropylpyrazolyl)methane and butyllithium followed by SO3NMe3 in THF yielded the new ligand lithium tris(3-isopropylpyrazolyl)methane sulfonate (LiTpmsiPr). Various metal salts reacted with LiTpmsiPr to give the octahedral complexes M(TpmsiPr)2 (M = Zn, Cu, Ni, Co, Fe) in which each ligand has N,N,O binding to the metal. In the reaction between LiTpmsiPr and ZnCl2, in addition to the major product Zn(TpmsiPr)2, [LiTpmsiPrZnCl2].2THF was also formed as a minor product with a tetrahedral zinc atom coordinated to either N,N,Cl,Cl in the solid phase or N,N,N,Cl in acetonitrile solution. Although TpmsiPr is coordinatively flexible and can act as a bipodal or tripodal ligand, it appears to favor the formation of octahedral L2M complexes.