Bismuth-oxide nanoparticles: study in a beam and as deposited.

Bi2O3 is a promising material for solid-oxide fuel cells (SOFC) due to the high ionic conductivity of some phases. The largest value is reached for its δ-phase, but it is normally stable at temperatures too high for SOFC operation, while nanostructured oxide is believed to have more suitable stabilization temperature. However, to manufacture such a material with a controlled chemical composition is a challenging task. In this work, we investigated the fabrication of nanostructured Bi2O3 films formed by deposition of free Bi-oxide nanoparticles created in situ. The particle-production method was based on reactive sputtering and vapour aggregation. Depending on the fabrication conditions, the nanoparticles contained either a combination of Bi-metal and Bi-oxide, or only Bi-oxide. Prior to deposition, the free particles were probed in the beam - by synchrotron-based photoelectron spectroscopy (PES), which allowed assessing their composition "on the-fly". The nanoparticle films obtained after deposition were studied by PES, scanning electron microscopy, transmission electron microscopy, and electron diffraction. The films' chemical composition, grain dimensions, and crystal structure were probed. Our analysis suggests that our method produced Bi-oxide films in more than one polymorph of Bi2O3.

Tin-oxide nanoparticles deposited from a beam: what happens to the composition?

The debate around the oxidation states occurring in laboratory-prepared tin-oxide samples has been for a long time an obstacle for an unambiguous assignment of characterization studies performed on such samples. In particular the changes in the Sn core-level energies caused by oxidation - i.e. the chemical shifts - as measured by photoelectron spectroscopy (PES) have been under discussion. The assignment problem is especially pronounced for nanoscale structures, which are important for photovoltaics, electronics, catalysis, and gas sensing. The reasons for the difficulties lie both in the natural properties of tin oxides, which can have substantial deficiencies of oxygen and tin in the lattice, and in the shortcomings of the fabrication and PES-characterization procedures themselves. Our recent PES study on tin-oxide nanoparticles fabricated by vapour-aggregation gave a chemical shift two times larger than earlier reported for Sn(iv) oxide for the Sn 4d level. The implemented fabrication technique forms an in-vacuum beam of particles whose composition can be both controlled and characterized by PES. In the present work SnO and SnO2 nanoparticles fabricated this way were deposited from the beam and probed by PES directly, as well as after exposure to air. The deposited nanoparticle films were also imaged by TEM (Transmission Electron Microscopy). The effects of the deposition process and exposure to air on the chemical composition were studied. The PES study of deposited SnO2 nanoparticles in the Sn 4d and Sn 3d core-level regions revealed the same core level shift as for unsupported nanoparticles, indicating that the chemical composition is preserved in the deposition process. The TEM study demonstrated a crystalline structure of separate SnO2 particles with lattice constants close to the macroscopic Sn(iv)-oxide. The PES study on the particles exposed to air showed changes in the composition. For the film of initially SnO particles a higher intermediate oxide was created. For the SnO2 nanoparticle film a lower, but strong, intermediate oxide was observed, likely at the surface.

Metal-passivated PbS nanoparticles: fabrication and characterization.

Organic-shell-free PbS nanoparticles have been produced in the size range relevant for quantum-dot solar cells (QDSCs) by a vapor aggregation method involving magnetron reactive sputtering. This method creates a beam of free 5-10 nm particles in a vacuum. The dimensions of the particles were estimated after their deposition on a substrate by imaging them using ex situ SEM and HRTEM electron microscopy. The particle structure and chemical composition could be deduced "on the fly", prior to deposition, using X-ray photoelectron spectroscopy (XPS) with tunable synchrotron radiation. Our XPS results suggest that under certain conditions it is possible to fabricate particles with a semiconductor core and 1 to 2 monolayer shells of metallic lead. For this case the absolute energy of the highest occupied molecular orbital (HOMO) in PbS has been determined to be (5.0 ± 0.5) eV below the vacuum level. For such particles deposited on a substrate HRTEM has confirmed the XPS-based conclusions on the crystalline PbS structure of the semiconductor core. Absorption spectroscopy on the deposited film has given a value of ∼1 eV for the lowest exciton. Together with the valence XPS results this has allowed us to reconstruct the energy level scheme of the particles. The results obtained are discussed in the context of the properties of PbS QDSCs.

Core-shell structure disclosed in self-assembled Cu-Ag nanoalloy particles.

Core-shell segregation of copper and silver in self-assembled, free nanoparticles is established by means of photoelectron spectroscopy in a wide range of relative Cu-Ag concentrations. These conclusions are based on the analysis of the photon-energy-dependent changes of the Cu 3d and Ag 4d photoelectron spectra. The nanoparticles are formed from mixed Cu-Ag atomic vapor created by magnetron sputtering of a bimetallic sample in a gas-aggregation cluster source. Even at similar Cu and Ag fractions in the primary vapor the surface of the nanoparticles is dominated by silver. Only at low Ag concentration copper appears on the surface of nanoparticles. For the latter case, a threefold decrease in the Ag 4d spin-orbit splitting has been detected. The specific component distribution and electronic structure changes are discussed in connection with the earlier results on Cu-Ag macroscopic and surface alloys.

Photon energy dependent valence band response of metallic nanoparticles.

We show that the valence band response to photon impact in metallic nanoparticles is highly energy dependent. This is seen as drastic variations of cross sections in valence photoionization of free and initially charge-neutral nanosized metal clusters. The effect is demonstrated in a combined experimental and theoretical study of Rb clusters. The experimental findings are interpreted theoretically using a jellium model and superatom description. The variations are attributed to the changing overlap with the photon energy between the wave functions of diffuse delocalized valence electrons and continuum electrons producing a series of minima in the cross section.

Plasmon single- and multi-quantum excitation in free metal clusters as seen by photoelectron spectroscopy.

Plasmons are investigated in free nanoscale Na, Mg, and K metal clusters using synchrotron radiation-based x-ray photoelectron spectroscopy. The core levels for which the response from bulk and surface atoms can be resolved are probed over an extended binding energy range to include the plasmon loss features. In all species the features due to fundamental plasmons are identified, and in Na and K also those due to either the first order plasmon overtones or sequential plasmon excitation are observed. These features are discussed in view of earlier results for planar macroscopic samples and free clusters of the same materials.

A dose dependence study of O(2) adsorbed on large Ar clusters.

An investigation of the behavior of O(2) molecules in and on O(2)-doped large (N approximately 8000) Ar host clusters has been performed by means of core and valence photoelectron spectroscopy. Data from pure O(2) and Ar clusters, as well as from O(2)-doped Ar clusters, are presented. The experimental data together with calculations of the binding energy shifts of oxygen molecular ions in and on the surface of a large host Ar cluster show that the diffusion behavior has a strong dependence on the doping pressure. We conclude that the oxygen molecules in the doped Ar host do not partake in band formation, since there is clear vibrational resolution in the spectral features stemming from screened O(2) (+) ions. This implies that valence photoelectron spectroscopy can be used to determine the geometrical structure of this and certain, similar, cluster systems.

Charge delocalization dynamics of ammonia in different hydrogen bonding environments: free clusters and in liquid water solution.

Valence and core level photoelectron spectra and Auger electron spectra of ammonia in pure clusters have been measured. The Auger electron spectra of gas-phase ammonia, pure ammonia clusters and ammonia in aqueous solution are compared and interpreted via ab initio calculations of the Auger spectrum of the ammonia monomer and dimer. The calculations reveal that the final two-hole valence states can be delocalized over both ammonia molecules. Features at energies pertaining to delocalized states involving one, or more, hydrogen bonding orbitals can be found in both the ammonia cluster Auger electron spectrum and in that of the liquid solvated molecule. The lower Coulombic repulsion between two delocalized valence final state holes gives higher kinetic energy of the Auger electrons which is also observed in the spectra. This decay path--specific to the condensed phase--is responsible for more than 5% of the total cluster Auger intensity. Moreover, this interpretation is also applicable to the solid phase since the same features have been observed, but not assigned, in the Auger spectrum of solid ammonia.

Localized versus delocalized excitations just above the 3d threshold in krypton clusters studied by Auger electron spectroscopy.

We present Auger spectroscopy studies of large krypton clusters excited by soft x-ray photons with energies on and just above the 3d(52) ionization threshold. The deexcitation spectra contain new features as compared to the spectra measured both below and far above threshold. Possible origins of these extra features, which stay at constant kinetic energies, are discussed: (1) normal Auger process with a postcollision interaction induced energy shift, (2) recapture of photoelectrons into high Rydberg orbitals after Auger decay, and (3) excitation into the conduction band (or "internal" ionization) followed by Auger decay. The first two schemes are ruled out, hence internal ionization remains the most probable explanation.

Adsorption of polar molecules on krypton clusters.

The formation process of binary clusters has been studied using synchrotron based core level photoelectron spectroscopy. Free neutral krypton clusters have been produced by adiabatic expansion and doped with chloromethane molecules using the pickup technique. The comparison between the integrated intensities, linewidths, and level shifts of the cluster features of pure krypton and of chloromethane-krypton clusters has been used to obtain information about the cluster geometry. We have shown that most of the chloromethane molecules remain on the surface of the clusters.

Synchrotron radiation study of chloromethane clusters: effects of polarizability and dipole moment on core level chemical shifts.

Free neutral chloromethane clusters have been produced by adiabatic expansion and investigated by means of photoelectron spectroscopy. By studying the differences between the cluster binding energy shifts at the Cl 2p and C 1s thresholds we have shown that antiparallel packing is the dominant local structure of the clusters. This geometry is induced by the polar character of the constituent molecules, and it accords with the structures of chloromethane solids and dimers. Furthermore, results obtained from the analysis of the outer valence levels of the clusters support the suggested local structure. The roles of the polarizability and of the dipole moment of the constituent molecules in the cluster binding energy shifts are discussed in comparison with a recent investigation of bromomethane clusters.

Self-assembled heterogeneous argon/neon core-shell clusters studied by photoelectron spectroscopy.

Clusters formed by a coexpansion process of argon and neon have been studied using synchrotron radiation. Electrons from interatomic Coulombic decay as well as ultraviolet and x-ray photoelectron spectroscopy were used to determine the heterogeneous nature of the clusters and the cluster structure. Binary clusters of argon and neon produced by coexpansion are shown to exhibit a core-shell structure placing argon in the core and neon in the outer shells. Furthermore, the authors show that 2 ML of neon on the argon core is sufficient for neon valence band formation resembling the neon solid. For 1 ML of neon the authors observe a bandwidth narrowing to about half of the bulk value.

Two size regimes of methanol clusters produced by adiabatic expansion.

Free neutral methanol clusters produced by adiabatic expansion have been studied by photoelectron spectroscopy and line shape modeling. The results show that clusters belonging to two distinct size regimes can be produced by changing the expansion conditions. While the larger size regime can be well described by line shapes calculated for clusters consisting of hundreds of molecules, the smaller size regime corresponds to methanol oligomers, predominantly of cyclic structure. There is little contribution from dimers to the spectra.

Preferential site occupancy of krypton atoms on free argon-cluster surfaces.

Argon clusters have been doped with krypton atoms in a pick-up setup and investigated by means of ultraviolet and x-ray photoelectron spectroscopy (UPS and XPS). The width of the krypton surface feature in the XPS spectra from mixed krypton/argon clusters has been studied and found to be narrower than in the case of homogeneous krypton clusters. By considering known spectral broadening mechanisms of the cluster features and the electron binding energy shift of the cluster surface feature relative to the atomic signal, we conclude that krypton ad-atoms preferentially occupy high-coordination surface sites on the argon host-cluster.

Lineshapes in carbon 1s photoelectron spectra of methanol clusters.

A general protocol for theoretical modeling of inner-shell photoelectron spectra of molecular clusters is presented and applied to C1s spectra of oligomers and medium-sized clusters of methanol. The protocol employs molecular dynamics for obtaining cluster geometries and a polarizable force field for computing site-specific chemical shifts in ionization energy and linewidth. Comparisons to spectra computed from first-principle theories are used to establish the accuracy of the proposed force field approach. The model is used to analyze the C1s photoelectron spectrum of medium-sized clusters in terms of surface and bulk contributions. By treating the surface-to-bulk ratio as an adjustable parameter, satisfactory fits are obtained to experimental C1s spectra of a beam of methanol clusters.

The far from equilibrium structure of argon clusters doped with krypton or xenon.

Heterogeneous clusters created by doping Ar host clusters with Kr or Xe are shown to have radically different structures from the mixed clusters of the same type created by co-expansion of Ar-Kr or Ar-Xe gas mixtures. In contrast to the co-expansion case, the doped mixed clusters can be produced with Kr or Xe on the surface and Ar in the bulk. With the doping technique it is thus possible to control the surface composition of a specific cluster. A study of the cluster properties as a function of the doping pressure is also reported for the case of Ar clusters doped with Xe. The clusters have been studied by means of synchrotron radiation based X-ray photoelectron spectroscopy.

Postcollision interaction in noble gas clusters: observation of differences in surface and bulk line shapes.

The surface and bulk components of the x-ray photoelectron spectra of free noble gas clusters are shown to display differences in the influence of postcollision interaction between the photoelectron and the Auger electron on the spectral line shape; the bulk component is observed to be less affected than the surface and atomic parts of the spectra. A model for postcollision interaction in nonmetallic solids and clusters is also provided which takes the polarization screening into account. Core-level photoelectron spectra of Ar, Kr, and Xe have been recorded to verify the dependence of the postcollision interaction effect on the polarizability of the sample.

The electronic structure of free water clusters probed by Auger electron spectroscopy.

(H2O)(N) clusters generated in a supersonic expansion source with N approximately 1000 were core ionized by synchrotron radiation, giving rise to core-level photoelectron and Auger electron spectra (AES), free from charging effects. The AES is interpreted as being intermediate between the molecular and solid water spectra showing broadened bands as well as a significant shoulder at high kinetic energy. Qualitative considerations as well as ab initio calculations explain this shoulder to be due to delocalized final states in which the two valence holes are mostly located at different water molecules. The ab initio calculations show that valence hole configurations with both valence holes at the core-ionized water molecule are admixed to these final states and give rise to their intensity in the AES. Density-functional investigations of model systems for the doubly ionized final states--the water dimer and a 20-molecule water cluster--were performed to analyze the localization of the two valence holes in the electronic ground states. Whereas these holes are preferentially located at the same water molecule in the dimer, they are delocalized in the cluster showing a preference of the holes for surface molecules. The calculated double-ionization potential of the cluster (22.1 eV) is in reasonable agreement with the low-energy limit of the delocalized hole shoulder in the AES.

Femtosecond interatomic Coulombic decay in free neon clusters: large lifetime differences between surface and bulk.

A quantitative determination of 2s vacancy lifetimes in surface and bulk atoms of free Ne clusters has been made. While for free atoms the 2s inner-valence hole has a ps lifetime, it reduces to 6+/-1 fs for cluster bulk atoms. For surface atoms, the lifetime is on average longer than 30 fs. The lifetime estimate was obtained from fits of high-resolution photoelectron spectra of Ne clusters. The shortening of the lifetime is attributed to the coordination dependent interatomic Coulombic decay, which is extremely sensitive to internuclear distances.

The size of neutral free clusters as manifested in the relative bulk-to-surface intensity in core level photoelectron spectroscopy.

A new approach for obtaining an estimate of the effective size of the free neutral clusters is proposed. The approach relies on an experimental measure of the surface and interior or "bulk" cluster atoms provided by the x-ray photoelectron spectroscopy and on a model for the attenuation of photoelectrons ejected from the bulk of the cluster as the result of the ionizing irradiation. The experimental part gives the ratio of the electron signal from the bulk cluster atoms to that from the cluster surface atoms for a wide range of cluster sizes and electron kinetic energies. The attenuated response of the bulk atoms is modeled using an exponential law with the cluster size and kinetic-energy-dependent electron escape depth as parameters. For the experimental size range, model-based calculations for Ar, Kr, and Xe clusters are presented. The cluster size estimates obtained from comparison of the model calculations and experimental results agree well with those determined from the parameters of the cluster creation process. The combination of experiment and modeling also makes it possible to estimate the effective escape depth for electron propagation in free clusters. For Ar, Kr, and Xe clusters of varying mean size, absolute determination of the surface and bulk electron binding energies of the core levels used in the experiments has also been made.