Photophysical image analysis: Unsupervised probabilistic thresholding for images from electron-multiplying charge-coupled devices.

We introduce the concept photophysical image analysis (PIA) and an associated pipeline for unsupervised probabilistic image thresholding for images recorded by electron-multiplying charge-coupled device (EMCCD) cameras. We base our approach on a closed-form analytic expression for the characteristic function (Fourier-transform of the probability mass function) for the image counts recorded in an EMCCD camera, which takes into account both stochasticity in the arrival of photons at the imaging camera and subsequent noise induced by the detection system of the camera. The only assumption in our method is that the background photon arrival to the imaging system is described by a stationary Poisson process (we make no assumption about the photon statistics for the signal). We estimate the background photon statistics parameter, λbg, from an image which contains both background and signal pixels by use of a novel truncated fit procedure with an automatically determined image count threshold. Prior to this, the camera noise model parameters are estimated using a calibration step. Utilizing the estimates for the camera parameters and λbg, we then introduce a probabilistic thresholding method, where, for the first time, the fraction of misclassified pixels can be determined a priori for a general image in an unsupervised way. We use synthetic images to validate our a priori estimates and to benchmark against the Otsu method, which is a popular unsupervised non-probabilistic image thresholding method (no a priori estimates for the error rates are provided). For completeness, we lastly present a simple heuristic general-purpose segmentation method based on the thresholding results, which we apply to segmentation of synthetic images and experimental images of fluorescent beads and lung cell nuclei. Our publicly available software opens up for fully automated, unsupervised, probabilistic photophysical image analysis.

Geometry-Dependent Elastic Flow Dynamics in Micropillar Arrays.

Regular device-scale DNA waves for high DNA concentrations and flow velocities have been shown to emerge in quadratic micropillar arrays with potentially strong relevance for a wide range of microfluidic applications. Hexagonal arrays constitute another geometry that is especially relevant for the microfluidic pulsed-field separation of DNA. Here, we report on the differences at the micro and macroscopic scales between the resulting wave patterns for these two regular array geometries and one disordered array geometry. In contrast to the large-scale regular waves visible in the quadratic array, in the hexagonal arrays, waves occur in a device-scale disordered zig-zag pattern with fluctuations on a much smaller scale. We connect the large-scale pattern to the microscopic flow and observe flow synchronization that switches between two directions for both the quadratic and hexagonal arrays. We show the importance of order using the disordered array, where steady-state stationary and highly fluctuating flow states persist in seemingly random locations across the array. We compare the flow dynamics of the arrays to that in a device with sparsely distributed pillars. Here, we observe similar vortex shedding, which is clearly observable in the quadratic and disordered arrays. However, the shedding of these vortices couples only in the flow direction and not laterally as in the dense, ordered arrays. We believe that our findings will contribute to the understanding of elastic flow dynamics in pillar arrays, helping us elucidate the fundamental principles of non-Newtonian fluid flow in complex environments as well as supporting applications in engineering involving e.g., transport, sorting, and mixing of complex fluids.

Using symmetry to control viscoelastic waves in pillar arrays.

Solutions of macromolecules exhibit viscoelastic properties and unlike Newtonian fluids, they may break time-reversal symmetry at low Reynolds numbers resulting in elastic turbulence. Furthermore, under some conditions, instead of the chaotic turbulence, the result is large-scale waves in the form of cyclic spatial and temporal concentration variations, as has been shown for macromolecular DNA flowing in microfluidic pillar arrays. We here demonstrate how altering the symmetry of the individual pillars can be used to influence the symmetry of these waves. We control the extent of instabilities in viscoelastic flow by leveraging the effects of the symmetry of the pillars on the waves, demonstrating suppressed viscoelastic fluctuations with relevance for transport and sorting applications, or conversely opening up for enhanced viscoelasticity-mediated mixing. The onset of waves, which changes flow resistance, occurs at different Deborah numbers for flow in different directions through the array of triangular pillars, thus breaking the symmetry of the flow resistance along the device, opening up for using the occurrence of the waves to construct a fluidic diode.

Short and long-range cyclic patterns in flows of DNA solutions in microfluidic obstacle arrays.

We observe regular patterns emerging across multiple length scales with high-concentration DNA solutions in microfluidic pillar arrays at low Reynolds numbers and high Deborah numbers. Interacting vortices between pillars lead to long-range order in the form of large travelling waves consisting of DNA at high concentration and extension. Waves are formed in quadratic arrays of pillars, while randomizing the position of the pillar in each unit cell of a quadratic array leads to suppression of the long-range patterns. We find that concentrations exceeding the overlap concentration of the DNA enables the waves, and exploring the behavior of the waves as a function of flow rate, buffer composition, concentration and molecular length, we identify elastic effects as central to the origin of the waves. Our work may not only help increase the low throughput that often limits sample processing in microfluidics, it may also provide a platform for further studies of the underlying viscoelastic mechanisms.

Use of dielectrophoresis for directing T cells to microwells before nanostraw transfection: modelling and experiments.

Nanostraw substrates have great potential for achieving minimally invasive cell transfection. Cells located on the nanostraw substrate are subjected to mild DC electric pulses applied across the nanostraw substrate, which open pores in the cell membrane on top of the nanostraws and drives charged cargo through these pores via electrophoresis. However, with this method, the current may leak through uncovered nanostraws, thereby decreasing the desired effect in the cell-covered nanostraws. A minimization of the number of uncovered nanostraws could be achieved by high cell coverage, but this is challenging when working with small cell populations. Nanostraw substrates of smaller area could be covered by smaller cell populations but are hard to integrate into fluidics systems. Here, we use simulations and experiments to show that this issue can be addressed by covering the nanostraw substrate with an insulating layer containing pores of similar size to cells. The pores act as traps into which cells can be guided using dielectrophoresis, ensuring a high degree of occupancy while maintaining a high cell viability, even if the total number of cells is low.

High-Throughput Separation of Long DNA in Deterministic Lateral Displacement Arrays.

Length-based separation of DNA remains as relevant today as when gel electrophoresis was introduced almost 100 years ago. While new, long-read genomics technologies have revolutionised accessibility to powerful genomic data, the preparation of samples has not proceeded at the same pace, with sample preparation often constituting a considerable bottleneck, both in time and difficulty. Microfluidics holds great potential for automated, sample-to-answer analysis via the integration of preparatory and analytical steps, but for this to be fully realised, more versatile, powerful and integrable unit operations, such as separation, are essential. We demonstrate the displacement and separation of DNA with a throughput that is one to five orders of magnitude greater than other microfluidic techniques. Using a device with a small footprint (23 mm × 0.5 mm), and with feature sizes in the micrometre range, it is considerably easier to fabricate than parallelized nano-array-based approaches. We show the separation of 48.5 kbp and 166 kbp DNA strands achieving a significantly improved throughput of 760 ng/h, compared to previous work and the separation of low concentrations of 48.5 kbp DNA molecules from a massive background of sub 10 kbp fragments. We show that the extension of DNA molecules at high flow velocities, generally believed to make the length-based separation of long DNA difficult, does not place the ultimate limitation on our method. Instead, we explore the effects of polymer rotations and intermolecular interactions at extremely high DNA concentrations and postulate that these may have both negative and positive influences on the separation depending on the detailed experimental conditions.

Charge-Based Separation of Micro- and Nanoparticles.

Deterministic Lateral Displacement (DLD) is a label-free particle sorting method that separates by size continuously and with high resolution. By combining DLD with electric fields (eDLD), we show separation of a variety of nano and micro-sized particles primarily by their zeta potential. Zeta potential is an indicator of electrokinetic charge-the charge corresponding to the electric field at the shear plane-an important property of micro- and nanoparticles in colloidal or separation science. We also demonstrate proof of principle of separation of nanoscale liposomes of different lipid compositions, with strong relevance for biomedicine. We perform careful characterization of relevant experimental conditions necessary to obtain adequate sorting of different particle types. By choosing a combination of frequency and amplitude, sorting can be made sensitive to the particle subgroup of interest. The enhanced displacement effect due to electrokinetics is found to be significant at low frequency and for particles with high zeta potential. The effect appears to scale with the square of the voltage, suggesting that it is associated with either non-linear electrokinetics or dielectrophoresis (DEP). However, since we observe large changes in separation behavior over the frequency range at which DEP forces are expected to remain constant, DEP can be ruled out.

Deterministic Lateral Displacement: Challenges and Perspectives.

The advent of microfluidics in the 1990s promised a revolution in multiple industries from healthcare to chemical processing. Deterministic lateral displacement (DLD) is a continuous-flow microfluidic particle separation method discovered in 2004 that has been applied successfully and widely to the separation of blood cells, yeast, spores, bacteria, viruses, DNA, droplets, and more. Deterministic lateral displacement is conceptually simple and can deliver consistent performance over a wide range of flow rates and particle concentrations. Despite wide use and in-depth study, DLD has not yet been fully elucidated or optimized, with different approaches to the same problem yielding varying results. We endeavor here to provide up-to-date expert opinion on the state-of-art and current fundamental, practical, and commercial challenges with DLD as well as describe experimental and modeling opportunities. Because these challenges and opportunities arise from constraints on hydrodynamics, fabrication, and operation at the micro- and nanoscale, we expect this Perspective to serve as a guide for the broader micro- and nanofluidic community to identify and to address open questions in the field.

Cell Sorting Using Electrokinetic Deterministic Lateral Displacement.

We show that by combining deterministic lateral displacement (DLD) with electrokinetics, it is possible to sort cells based on differences in their membrane and/or internal structures. Using heat to deactivate cells, which change their viability and structure, we then demonstrate sorting of a mixture of viable and non-viable cells for two different cell types. For Escherichia coli, the size change due to deactivation is insufficient to allow size-based DLD separation. Our method instead leverages the considerable change in zeta potential to achieve separation at low frequency. Conversely, for Saccharomyces cerevisiae (Baker's yeast) the heat treatment does not result in any significant change of zeta potential. Instead, we perform the sorting at higher frequency and utilize what we believe is a change in dielectrophoretic mobility for the separation. We expect our work to form a basis for the development of simple, low-cost, continuous label-free methods that can separate cells and bioparticles based on their intrinsic properties.

A Droplet-Based Microfluidics Route to Temperature-Responsive Colloidal Molecules.

Small clusters of spherical colloids that mimic real molecules, so-called colloidal molecules, hold great promise as building blocks in bottom-up routes to new materials. However, their typical hard sphere nature has hampered their assembly into ordered structures, largely due to a lack of control in the interparticle interactions. To provide easy external control of the interactions, the present work focuses on the preparation of colloidal molecules from temperature-responsive microgel particles that undergo a transition from a soft repulsive to a short-range attractive state as their characteristic volume phase transition temperature (VPTT) is crossed. Preparation of the colloidal molecules starts with the use of a droplet-based microfluidics device to form highly uniform water-in-oil (W/O) emulsion droplets containing, on average and with a narrow distribution, four microgels per droplet. Evaporation of the water then leads to the formation of colloidal molecule-like clusters, which can be harvested following cross-linking and phase transfer. We use a mixture of two types of microgels, one based on poly(N-isopropylacrylamide) (PNIPAM) and the other on poly(N-isopropylmethacrylamide) (PNIPMAM), to prepare bicomponent colloidal molecules, and show that the difference in VPTT between the two allows for induction of attractive interparticle interactions between the PNIPAM interaction sites at temperatures in between the two VPTTs, analogous to the interactions among patchy biomacromolecules such as many proteins.