KASP: a high-throughput genotyping system and its applications in major crop plants for biotic and abiotic stress tolerance.

Advances in plant molecular breeding have resulted in the development of new varieties with superior traits, thus improving the crop germplasm. Breeders can screen a large number of accessions without rigorous and time-consuming phenotyping by marker-assisted selection (MAS). Molecular markers are one of the most imperative tools in plant breeding programmes for MAS to develop new cultivars possessing multiple superior traits. Single nucleotide polymorphisms (SNPs) are ideal for MAS due to their low cost, low genotyping error rates, and reproducibility. Kompetitive Allele Specific PCR (KASP) is a globally recognized technology for SNP genotyping. KASP is an allele-specific oligo extension-based PCR assay that uses fluorescence resonance energy transfer (FRET) to detect genetic variations such as SNPs and insertions/deletions (InDels) at a specific locus. Additionally, KASP allows greater flexibility in assay design, which leads to a higher success rate and the capability to genotype a large population. Its versatility and ease of use make it a valuable tool in various fields, including genetics, agriculture, and medical research. KASP has been extensively used in various plant-breeding applications, such as the identification of germplasm resources, quality control (QC) analysis, allele mining, linkage mapping, quantitative trait locus (QTL) mapping, genetic map construction, trait-specific marker development, and MAS. This review provides an overview of the KASP assay and emphasizes its validation in crop improvement related to various biotic and abiotic stress tolerance and quality traits.

Transcriptome profiling and characterization of genes associated with tuberization under high temperature in aeroponics in potato cv. Kufri Anand.

BACKGROUND: High temperature stress is an important abiotic factor, which affects tuberization and ultimately causes heavy yield reduction in potato. OBJECTIVES: Identification and characterization of genes associated with tuberization under high temperature stress is essential for future management through biotechnology. METHODOLOGY: Two contrasting potato varieties Kufri Anand (profuse tuber-bearing) versus Kufri Frysona (very less/scanty tuber-bearing, control) were cultivated in aeroponics under high temperature stress, and transcriptomes were analyzed. RESULTS: Potato cv. Kufri Anand was found superior over control (Kufri Frysona) for tuber yield and its component traits along with root morphology under aeroponics. Transcriptomes of tuber and leaf tissues were analyzed. Statistically significant (p < 0.05) differentially expressed genes (DEGs) were categorised into up-regulated (> 2 log2 fold change, FC) and down-regulated (< -2 log2 FC) genes. DEGs were annotated by gene ontology and KEGG pathways. A few selected up-regulated genes of both tissues were identified, and phylogeny tree and motif analysis were analysed based on 36 peptide sequences representing 15 selected DEGs in this study. Further, gene expression markers were developed and validated by real time qPCR analysis for the identification of high temperature tolerant genotypes. CONCLUSION: A few key genes associated in tuberization under high temperature conditions were heat shock proteins (e.g. 18.5 kDa class I heat shock protein), sugar metabolism (e.g. glucosyltransferase), transcription factor (e.g. WRKY), and phytohormones (e.g. auxin-induced beta-glucosidase). Our study provides an overview of key genes involved in tuberization under high temperature stress in potato cv. Kufri Anand under aeroponics.

Utilization of crop wild relatives for biotic and abiotic stress management in Indian mustard [Brassica juncea (L.) Czern. & Coss.].

Brassica juncea (L.) Czern. & Coss. (Indian mustard) is an economically important edible oil crop. Over the years, plant breeders have developed many elite varieties of B. juncea with better yield traits, but research work on the introgression of stress resilience traits has largely been lagging due to scarcity of resistant donors. Crop wild relatives (CWRs) are the weedy relatives of domesticated plant species which are left unutilized in their natural habitat due to the presence of certain undesirable alleles which hamper their yield potential, and thus, their further domestication. CWRs of B. juncea namely include Sinapis alba L. (White mustard), B. tournefortii Gouan. (African mustard), B. fruticulosa Cirillo (Twiggy turnip), Camelina sativa L. (Gold-of-pleasure), Diplotaxis tenuisiliqua Delile (Wall rocket), D. erucoides L. (White wall rocket), D. muralis L. (Annual wall rocket), Crambe abyssinica R.E.Fr. (Abyssinian mustard), Erucastrum gallicum Willd. (Common dogmustard), E. cardaminoides Webb ex Christ (Dogmustard), Capsella bursa-pastoris L. (Shepherds purse), Lepidium sativum L. (Garden Cress) etc. These CWRs have withstood several regimes of biotic and abiotic stresses over the past thousands of years which led them to accumulate many useful alleles contributing in resistance against various environmental stresses. Thus, CWRs could serve as resourceful gene pools for introgression of stress resilience traits into Indian mustard. This review summarizes research work on the introgression of resistance against Sclerotinia stem rot (caused by Sclerotinia sclerotiorum), Alternaria blight (caused by Alternaria brassicae), white rust (caused by Albugo candida), aphid attack, drought and high temperature from CWRs into B. juncea. However, various pre- and post-fertilization barriers due to different ploidy levels are major stumbling blocks in the success of such programmes, therefore, we also insightfully discuss how the advances made in -omics technology could be helpful in assisting various breeding programmes aiming at improvisation of stress resilience traits in B. juncea.

Screening of wild species and transcriptome profiling to identify differentially regulated genes in response to late blight resistance in potato.

Late blight (Phytophthora infestans) is a serious disease of potatoes. The aim of this study was to screen wild potato species and identify differentially expressed genes (DEGs) associated with late blight resistance. Wild potato species such as PIN45 (Solanum pinnatisectum), CPH62 (Solanum cardiophyllum), JAM07 (Solanum jamesii), MCD24 (Solanum microdontum), PLD47 (Solanum polyadenium), and cv. Kufri Bahar (control) were tested by artificial inoculation of P. infestans under controlled conditions. Transcriptomes of the leaf tissues (96 h post-inoculation) were sequenced using the Illumina platform. Statistically significant (p < 0.05) DEGs were analyzed in wild species by comparison with the control, and upregulated (>2 log2 fold change, FC) and downregulated (<-2 log2 FC) genes were identified. DEGs were functionally characterized with Gene Ontology (GO) terms and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways. Selected genes were validated by real-time PCR analysis to confirm RNA-seq results. We identified some upregulated genes associated with late blight resistance in wild species such as cytochrome P450, proline-rich protein, MYB transcription factor MYB139, ankyrin repeat-containing protein, and LRR receptor-like serine/threonine-protein kinase in PIN45; glucosyltransferase, fructose-bisphosphate aldolase, and phytophthora-inhibited protease 1 in CPH62; steroid binding protein and cysteine proteinase 3 in JAM07; glycine-rich cell wall structural protein 1 and RING finger protein in MCD24; and cysteine proteinase 3 and major latex protein in PLD47. On the other hand, downregulated genes in these species were snakin-2 and WRKY transcription factor 3 in PIN45; lichenase and phenylalanine ammonia-lyase 1 in CPH62; metallothionein and LRR receptor-like serine/threonine-protein kinase in JAM07; UDP-glucoronosyl/UDP-glucosyl transferase family protein and steroid binding protein in MCD24; and cytoplasmic small heat shock protein class I and phosphatase PLD47. Our study identified highly resistant wild potato species and underlying genes such as disease resistance, stress response, phytohormones, and transcription factors (e.g., MYB, WRKY, AP2/ERF, and AN1) associated with late blight resistance in wild potato species.

A comprehensive and conceptual overview of omics-based approaches for enhancing the resilience of vegetable crops against abiotic stresses.

MAIN CONCLUSION: Abiotic stresses adversely affect the productivity and production of vegetable crops. The increasing number of crop genomes that have been sequenced or re-sequenced provides a set of computationally anticipated abiotic stress-related responsive genes on which further research may be focused. Knowledge of omics approaches and other advanced molecular tools have all been employed to understand the complex biology of these abiotic stresses. A vegetable can be defined as any component of a plant that is eaten for food. These plant parts may be celery stems, spinach leaves, radish roots, potato tubers, garlic bulbs, immature cauliflower flowers, cucumber fruits, and pea seeds. Abiotic stresses, such as deficient or excessive water, high temperature, cold, salinity, oxidative, heavy metals, and osmotic stress, are responsible for the adverse activity in plants and, ultimately major concern for decreasing yield in many vegetable crops. At the morphological level, altered leaf, shoot and root growth, altered life cycle duration and fewer or smaller organs can be observed. Likewise different physiological and biochemical/molecular processes are also affected in response to these abiotic stresses. In order to adapt and survive in a variety of stressful situations, plants have evolved physiological, biochemical, and molecular response mechanisms. A comprehensive understanding of the vegetable's response to different abiotic stresses and the identification of tolerant genotypes are essential to strengthening each vegetable's breeding program. The advances in genomics and next-generation sequencing have enabled the sequencing of many plant genomes over the last twenty years. A combination of modern genomics (MAS, GWAS, genomic selection, transgenic breeding, and gene editing), transcriptomics, and proteomics along with next-generation sequencing provides an array of new powerful approaches to the study of vegetable crops. This review examines the overall impact of major abiotic stresses on vegetables, adaptive mechanisms and functional genomic, transcriptomic, and proteomic processes used by researchers to minimize these challenges. The current status of genomics technologies for developing adaptable vegetable cultivars that will perform better in future climates is also examined.

Digitalization of potato breeding program: Improving data collection and management.

A plant breeding program involves hundreds of experiments, each having number of entries, genealogy information, linked experimental design, lists of treatments, observed traits, and data analysis. The traditional method of arranging breeding program information and data recording and maintenance is not centralized and is always scattered in different file systems which is inconvenient for retrieving breeding information resulting in poor data management and the loss of crucial data. Data administration requires a significant amount of manpower and resources to maintain nurseries, trials, germplasm lines, and pedigree records. Further, data transcription in scattered spreadsheets and files leads to nomenclature and typing mistakes, which affects data analysis and selection decisions in breeding programs. The accurate data recording and management tools could improve the efficiency of breeding programs. Recent interventions in data management using computer-based breeding databases and informatics applications and tools have made the breeder's life easier. Because of its digital nature, the data obtained is improved even further, allowing for the acquisition of images, voice recording and other specific data kinds. Public breeding programs are far behind the industry in the use of data management tools and softwares. In this article, we have compiled the information on available data recording tools and breeding data management softwares with major emphasis on potato breeding data management.

Molecular characterization and genetic diversity analysis in Indian mustard (Brassica juncea L. Czern & Coss.) varieties using SSR markers.

In this study, we evaluated genetic diversity in a panel of 87 Indian mustard varieties using 200 genomic-SSR markers. A total of 189 SSRs resulted into positive amplification with 174 (92.06%) SSRs generating polymorphic products and 15 (7.94%) SSRs producing monomorphic amplicons. A total of 552 alleles were obtained and allele number varied from 2-6 with an average number of 3.17 alleles per SSR marker. The major allele frequency ranged from 0.29 (ENA23) to 0.92 (BrgMS841) with an average value of 0.58 per SSR locus. The polymorphic information content (PIC) value ranged from 0.10 (BrgMS841) to 0.68 (BrgMS519) with 0.39 as mean PIC value. The gene diversity per locus ranged from 0.13 (BrgMS841) to 0.72 (ENA23 & BrgMS519) with a mean value of 0.48 per SSR primer pair. Both Unweighted Neighbor Joining-based dendrogram and population structure analysis divided all the 87 varieties into two major groups/subpopulations. Analysis of molecular variance (AMOVA) inferred the presence of more genetic variation (98%) among individuals than among groups (2%). A total of 31 SSRs produced 36 unique alleles for 27 varieties which will serve as unique DNA-fingerprints for the identification and legal protection of these varieties. Further, the results obtained provided a deeper insight into the genetic structure of Indian mustard varieties in India and will assist in formulating future breeding strategies aimed at Indian mustard genetic improvement.

Agro-morphological traits and SSR markers reveal genetic variations in germplasm accessions of Indian mustard - An industrially important oilseed crop.

Indian mustard is an economic and highly important industrial oilseed crop. In this study, genetic diversity among 135 Indian mustard germplasm accessions was evaluated using 11 agro-morphological descriptors and 227 SSRs. Morphological characterization of Indian mustard germplasm accessions exhibited a broad range of variation for characters including biological yield (CV = 25.63%), seed yield (CV = 23.23% and 1000-seed weight (CV = 23.14%); whereas traits such as days to maturity (CV = 2.91%) showed lowest degree of variation. Out of 227 SSR markers evaluated, a total of 159 (70.04%) SSRs produced polymorphic products and 68 (29.96%) SSRs resulted into monomorphic amplicons. The polymorphic markers amplified 575 alleles and the number of alleles ranged from 2-7 with 3.61 average number of alleles per locus. SSR markers BRMS-030, Ra2-E11, Ra2-G05, Ni4-G10 and Ol10B11 generated the highest number of alleles (7). SSR marker Ra2-G05 was having the highest allele frequency (0.84), while BRMS-002 was having the lowest major allele frequency (0.33). Polymorphism information content (PIC) values ranged from 0.24-0.61 with an average value of 0.39 per primer pair. Unweighted pair group method with arithmetic mean (UPGMA) cluster analysis based on morphological traits grouped Indian mustard genotypes into three clusters, while two clusters were obtained based on SSR based clustering. Population structure analysis provided a better estimate of genetic diversity and divided all the genotypes into five subpopulations. Genetically diverse accessions identified may be used for hybridization in Indian mustard crop improvement programs in future.

SeDeM Expert System, an Innovative Tool for Developing Directly Compressible Tablets: A Review.

BACKGROUND: SeDeM (Sediment Delivery Model) expert system is a preformulation tool employed for evaluating direct compression suitability of various excipients. SeDeM is a 12 parameters derived diagram and SeDeM-ODT (Sediment Delivery Model-Orodispersible tablets) is a 15 parameters derived diagram that can be used as a research tool for reducing the product development time. The best possible excipients for a specified pharmaceutical active ingredient could be screened for direct compression suitability. OBJECTIVE: SeDeM expert system has been successfully used and implemented for characterizing galenic properties of pharmaceutical excipients, direct compression suitability of excipients, development of ODT formulations, development of sustained-release formulations, and development of tablets of taste-masked drugs. CONCLUSION: In the present review paper, the development and applications of SeDeM and SeDeMODT systems have been discussed in detail.

Genetic diversity in leafy mustard (Brassica juncea var. rugosa) as revealed by agro-morphological traits and SSR markers.

Leafy mustard (B. juncea var. rugosa) constitutes an important group of vegetable mustard crops in India and is mainly cultivated in home-backyard and hilly regions of Uttarakhand and some North-eastern states. In the present study, various agro-morphological traits, physiological and biochemical traits along with SSR markers were used for genetic diversity evaluation in a germplasm collection of leafy mustard. This study revealed a significant variation among 59 accessions of leafy mustard in both qualitative and quantitative agro-morphological traits indicating the accessions' promising potential for consumption purpose and for use in breeding programs. Maximum variability was recorded for leaf area elongation rate (CV = 53.12%), followed by total plant weight (TPW) (CV = 50.63%) and seed yield per plant (CV = 44.33%). In molecular analysis, 155 SSRs evaluated resulted in 482 alleles and the number of alleles varied form 1 to 8 with an average of 3.11 alleles per marker. A total of 122 (78.70%) SSRs resulted into polymorphic amplicons. PIC value varied from 0.32 to 0.77 with an average value of 0.44 per SSR locus. The unweighted neighbour-joining-based dendrogram analysis divided all the 59 accessions into two major groups on the basis of both agro-morphological traits and SSR markers, whereas, three subpopulations/subgroups were predicted by population STRUCTURE analysis. AMOVA indicated the presence of more variability within population than among population. Overall, agro-morphologically better performing and genetically diverse genotypes have been identified which could be further used as donors for leafy mustard improvement programs.

Current achievements and future prospects of genetic engineering in Indian mustard (Brassica juncea L. Czern & Coss.).

MAIN CONCLUSION: Transgenic technology in Indian mustard has expedited crop improvement programs. Further, there is a need to optimize gene editing protocols and find out the suitable target genes to harvest the benefits of gene editing technology in this important edible oilseed crop. Brassica juncea is an economically and industrially important oilseed crop being grown mainly in India and in some parts of Canada, Russia, China and Australia. Besides being consumed as edible oil, it also has numerous applications in food and paint industry. However, its overall production and productivity are being hampered by a number of biotic and abiotic stress factors. Further, its oil and seedmeal quality needs to be improved for increasing food as well as feed value. However, the lack of resistant crossable germplasm or varieties necessitated the use of genetic engineering interventions in Indian mustard crop improvement. A number of genes conferring resistance to biotic stresses including lectins for aphids' control, chitinase, glucanase and osmotin for disease control and for abiotic stresses, CODA, LEA and ion antiporter genes have been transferred to Indian mustard. Both antisense and RNAi technologies have been employed for improving oil and seedmeal quality. Efforts have been made to improve the phytoremediation potential of this crop through genetic engineering approach. The deployment of barnase/barstar gene system for developing male sterile and restorer lines has really expedited hybrid development programs in Indian mustard. Further, there is a need to optimize gene editing protocols and to find out suitable target genes for gene editing in this crop. In this review paper, authors have attempted to review various genetic transformation efforts carried out in Indian mustard for its improvement to combat biotic and abiotic stress challenges, quality improvement and hybrid development.

Development of chitosan-catechol conjugates as mucoadhesive polymer: assessment of acute oral toxicity in mice.

Development of modified polymers is the focused area of research for developing stable, effective, sustainable and economical polymeric materials for developing different drug delivery systems. Modification of chitosan by catechol functionalization is useful for developing chitosan derivative with the improved mucoadhesive property. Present study was designed to perform single dose acute oral toxicity on chitosan-catechol conjugates in Swiss albino mice as per international guidelines. Oral administration of modified chitosan did not exhibit any significant change in body weight, behavioural pattern, haematology, food intake and clinical symptoms in the experimental animals. In the histopathological study, no pathological changes were observed in the vital organs of mice when administered perorally with 300 mg/kg and 2,000 mg/kg body-weight doses of chitosan-catechol polymeric conjugates. Overall, it was concluded from the acute oral toxicity study that the oral administration of chitosan-catechol conjugates in mice did not produce any toxicity. Hence, chitosan-catechol conjugates could be designated and recommended as safe polymeric material for developing different drug delivery systems.

Identification of New Source of Resistance to Powdery Mildew of Indian Mustard and Studying Its Inheritance.

Powdery mildew of Indian mustard (Brassica juncea), caused by Erysiphe cruciferarum, is emerging as major problem in India. All the Indian mustard cultivars presently grown in India are highly susceptible to powdery mildew and so far no resistance source has been reported. In this study, with an aim to identify resistant source, 1,020 Indian mustard accessions were evaluated against E. cruciferarum PMN isolate, at Wellington, The Nilgiris, Tamil Nadu, India under natural hot spot conditions. The study identified one accession (RDV 29) with complete resistance against E. cruciferarum PMN isolate for the first time, which was consistent in five independent evaluations. Genetic analysis of F1, F2 and backcross populations obtained from the cross RSEJ 775 (highly susceptible) × RDV 29 (highly resistant) for two season revealed that the resistance is governed by two genes with semi-dominant and gene dosage effect. Further, a new disease rating system using six scales (0, 1, 2, 3, 4, and 5) has also been proposed in this study to score powdery mildew based on progress of fungal growth in different plant parts of the F2 population. The outcome of this study viz. newly identified powdery mildew-resistant Indian mustard accession (RDV 29), information on inheritance of resistance and the newly developed disease rating scale will provide the base for development of powdery mildew-resistant cultivars of Indian mustard.

Patented therapeutic drug delivery strategies for targeting pulmonary diseases.

Introduction: Pulmonary route is one of the preferred routes for the administration of therapeutically active agents for systemic as well as localized delivery. Chronic obstructive pulmonary disease (COPD), bronchial asthma, pneumonia, pulmonary hypertension, bronchiolitis, lung cancer, and tuberculosis are the major chronic diseases associated with the pulmonary system. Knowledge about the affecting factors, namely, the etiology, pathophysiology, and the various barriers (mechanical, chemical, immunological, and behavioral) in pulmonary drug delivery is essential to develop an effective drug delivery system. Formulation strategies and mechanisms of particle deposition in the lungs also play an important role in designing a suitable delivery system.Areas covered: In the present paper, various drug delivery strategies, viz. nanoparticles, microparticles, liposomes, powders, and microemulsions have been discussed systematically, from a patent perspective.Expert opinion: Patent publications on formulation strategies have been instrumental in the evolution of new techniques and technologies for safe and effective treatment of pulmonary diseases. New delivery systems are required to be simple/reproducible/scalable/cost-effective scale for manufacturing ability and should be safe/effective/stable/controllable for meeting quality and regulatory compliance.

Expression of cry1Aa gene in cabbage imparts resistance against diamondback moth (Plutella xylostella).

Brassica oleracea cv. Pride of India is one of the most promising vegetable cultivars commercially grown as cash crop in Himachal Pradesh, India. However, its overall production is severely hampered by diamondback moth (Plutella xylostella), a notorious pest. To avoid yield losses caused by this pest, cryIAa gene was introduced into cabbage cv. Pride of India using Agrobacterium-mediated transformation method. In an attempt to maximize the transformation frequency, critical determinant factors such as explant type, pre-incubation and co-cultivation period, and acetosyringone effect were successfully optimized. The highest transformation frequency (4.67% and 14.50%) in cotyledon and hypocotyl explant was achieved with a pre-incubation period of 72 h and co-cultivation period of 48 h. Furthermore, transformation frequency was enhanced in cotyledon (18.66%) and hypocotyl (32.00%) explants, when selective regeneration medium was fortified with 100 µM acetosyringone, respectively. The transgene (cryIAa) integration and copy number were confirmed using PCR and Southern blotting. Reverse transcriptase PCR and quantitative real-time PCR analyses were performed that proved transcriptional expression of cryIAa gene in PCR-positive transgenic events. Transgenic cabbage-fed diamondback moth larvae showed significantly higher mortality, thereby proving transgene effectiveness against insect pest control.

SSR marker variations in Brassica species provide insight into the origin and evolution of Brassica amphidiploids.

BACKGROUND: Oilseed Brassica represents an important group of oilseed crops with a long history of evolution and cultivation. To understand the origin and evolution of Brassica amphidiploids, simple sequence repeat (SSR) markers were used to unravel genetic variations in three diploids and three amphidiploid Brassica species of U's triangle along with Eruca sativa as an outlier. RESULTS: Of 124 Brassica-derived SSR loci assayed, 100% cross-transferability was obtained for B. juncea and three subspecies of B. rapa, while lowest cross-transferability (91.93%) was obtained for Eruca sativa. The average % age of cross-transferability across all the seven species was 98.15%. The number of alleles detected at each locus ranged from one to six with an average of 3.41 alleles per primer pair. Neighbor-Joining-based dendrogram divided all the 40 accessions into two main groups composed of B. juncea/B. nigra/B. rapa and B. carinata/B. napus/B. oleracea. C-genome of oilseed Brassica species remained relatively more conserved than A- and B-genome. A- genome present in B. juncea and B. napus seems distinct from each other and hence provides great opportunity for generating diversity through synthesizing amphidiploids from different sources of A- genome. B. juncea had least intra-specific distance indicating narrow genetic base. B. rapa appears to be more primitive species from which other two diploid species might have evolved. CONCLUSION: The SSR marker set developed in this study will assist in DNA fingerprinting of various Brassica species cultivars, evaluating the genetic diversity in Brassica germplasm, genome mapping and construction of linkage maps, gene tagging and various other genomics-related studies in Brassica species. Further, the evolutionary relationship established among various Brassica species would assist in formulating suitable breeding strategies for widening the genetic base of Brassica amphidiploids by exploiting the genetic diversity present in diploid progenitor gene pools.

Molecular characterization of Turnip mosaic potyvirus (TuMV)-infecting radish (Raphanus sativus L.) crop in India.

Nine isolates of Turnip mosaic potyvirus (TuMV)-infecting radish collected from different regions of Northern India were characterized. All isolates except for New Delhi and Rajasthan isolates resulted positive for TuMV in double antibody sandwich-enzyme linked immunosorbent assay (DAS-ELISA). RNA was isolated from leaves of infected plants and used in reverse transcriptase-polymerase chain reaction (RT-PCR) with TuMV coat protein (CP) gene-specific primers. Viral amplicons of expected 1000 bp size were obtained, which were further subjected to cloning and sequencing. CP gene of all the seven isolates was 867 bp long, encoding 288 amino acid residues. Percent homology of CP gene of all the Indian isolates among themselves and with other TuMV isolates retrieved from NCBI was in the range of 87-99 and 92-100% at nucleotide and amino acid levels, respectively. Phylogenetic analysis based upon CP gene nucleotide and amino acid sequences with other TuMV isolates reported from across the globe using unweighted pair group method with arithmetic mean (UPGMA) inferred classification of test isolates into basal-BR group due to their occurrence nearest to the TuMV isolates belonging to the basal-BR group. Information generated about the characteristic features of TuMV and geographical distribution of particular virus genotype-infecting radish crop will provide a platform for formulating disease resistance strategies.

Genetic engineering strategies for biotic and abiotic stress tolerance and quality enhancement in horticultural crops: a comprehensive review.

Genetic engineering technique offers myriads of applications in improvement of horticultural crops for biotic and abiotic stress tolerance, and produce quality enhancement. During last two decades, a large number of transgenic horticultural crops has been developed and more are underway. A number of genes including natural and synthetic Cry genes, protease inhibitors, trypsin inhibitors and cystatin genes have been used to incorporate insect and nematode resistance. For providing protection against fungal and bacterial diseases, various genes like chitinase, glucanase, osmotin, defensin and pathogenesis-related genes are being transferred to many horticultural crops world over. RNAi technique has been found quite successful in inducing virus resistance in horticultural crops in addition to coat protein genes. Abiotic stresses such as drought, heat and salinity adversely affect production and productivity of horticultural crops and a number of genes encoding for biosynthesis of stress protecting compounds including mannitol, glycine betaine and heat shock proteins have been employed for abiotic stress tolerance besides various transcription factors like DREB1, MAPK, WRKY, etc. Antisense gene and RNAi technologies have revolutionized the pace of improvement of horticultural crops, particularly ornamentals for color modification, increasing shelf-life and reducing post-harvest losses. Precise genome editing tools, particularly CRISPR/Cas9, have been efficiently applied in tomato, petunia, citrus, grape, potato and apple for gene mutation, repression, activation and epigenome editing. This review provides comprehensive overview to draw the attention of researchers for better understanding of genetic engineering advancements in imparting biotic and abiotic stress tolerance as well as on improving various traits related to quality, texture, plant architecture modification, increasing shelf-life, etc. in different horticultural crops.