ABSTRACT
T cell responses play an important role in protection against beta-coronavirus infections, including SARS-CoV-2, where they associate with decreased COVID-19 disease severity and duration. To enhance T cell immunity across epitopes infrequently altered in SARS-CoV-2 variants, we designed BNT162b4, an mRNA vaccine component that is intended to be combined with BNT162b2, the spike-protein-encoding vaccine. BNT162b4 encodes variant-conserved, immunogenic segments of the SARS-CoV-2 nucleocapsid, membrane, and ORF1ab proteins, targeting diverse HLA alleles. BNT162b4 elicits polyfunctional CD4+ and CD8+ T cell responses to diverse epitopes in animal models, alone or when co-administered with BNT162b2 while preserving spike-specific immunity. Importantly, we demonstrate that BNT162b4 protects hamsters from severe disease and reduces viral titers following challenge with viral variants. These data suggest that a combination of BNT162b2 and BNT162b4 could reduce COVID-19 disease severity and duration caused by circulating or future variants. BNT162b4 is currently being clinically evaluated in combination with the BA.4/BA.5 Omicron-updated bivalent BNT162b2 (NCT05541861).
Subject(s)
BNT162 Vaccine , COVID-19 , Animals , Cricetinae , Humans , Antibodies, Neutralizing , Antibodies, Viral , COVID-19/prevention & control , Epitopes , SARS-CoV-2/geneticsABSTRACT
Amphotericin B (AmB) is gold standard therapy for leishmaniasis and fungal infections. Considering the global disease burden, nearly 90% of cases occur in economically vulnerable countries, making the cost of AmB therapy a critical healthcare challenge in controlling disease burden. All currently marketed AmB products are administered through an intravenous (i.v.) route and involve high treatment costs. Designing an orally effective AmB formulation can substantially reduce the cost of therapy and improve patient compliance. However, it is a challenging task because of the distinctive physicochemical properties of AmB. Previously, we developed a lipid-based prodrug of AmB, AmB-oleyl conjugate (AmB-OA), which showcased remarkable stability in the gastrointestinal (GI) environment and improved intestinal permeation. Hereby, we have developed self-nanoemulsifiying drug delivery system (SNEDDS) of AmB-OA to further enhance the oral bioavailability of AmB and potentiate its therapeutic benefits. SNEDDS was developed by screening a wide range of oils, surfactants, and cosurfactants, and formulation composition was optimized using extreme vertices design. AmB-OA SNEDDS possessed the ability of quick self-nanoemulsification on dilution (droplet size â¼56 nm) along with remarkable stability in the GI environment. Accelerated stability (40 °C/75% relative humidity) studies and freeze-thaw cycling studies proved that the formulation was stable at tropical conditions as well as temperature cycling stress. Drug transport analysis in Caco-2 cells revealed a remarkable increase in drug transport for AmB-OA SNEDDS compared to AmB along with minimal cellular toxicities. AmB-OA SNEDDS showcased â¼8.9-fold higher AUCTot than AmB in in vivo pharmacokinetic study, proving the effectiveness of formulation to enhance oral bioavailability. In vivo toxicity analysis highlighted the ameliorated toxicity risk associated with SNEDDS formulation. Therefore, the AmB-OA SNEDDS formulation may provide a cost-friendly and effective strategy to resolve the oral AmB drug delivery challenge.
Subject(s)
Prodrugs , Humans , Amphotericin B/pharmacology , Caco-2 Cells , Solubility , Drug Delivery SystemsABSTRACT
The onychomycosis treatment remains a big challenge for onychologist due to the shorter nail residence time of topical formulations and the lack of availability of novel formulations in markets for new generation antifungal drugs. The objective of this work was to design, develop, optimize, and evaluate microemulsion formulations for effective delivery of efinaconazole through transungual route in onychomycosis treatment. Capmul® MCM (Glyceryl Caprylate/Caprate) as oil, Labrasol® (caprylocaproyl polyoxyl-8 glycerides) as a surfactant, and Transcutol® P (diethylene glycol monoethyl ether) as co-surfactant exhibited higher solubility of efinaconazole and surfactant-cosurfactant mixture (Smix) in a ratio of 1:1 rendered higher microemulsion region in the pseudo-ternary phase diagram. The optimized microemulsion formulation containing 6%w/w oil phase, 22.5%w/w surfactant, 22.5%w/w co-surfactant, and 49%w/w demineralized water was converted into gel formulation using 1.0%w/w Carbopol® 934 P gelling agent and evaluated for stability of 6 months. The optimized microemulsion formulation globule size was less than 100 nm. The ex vivo permeation confirmed improved permeation of efinaconazole from microemulsion formulations (346.36±12.90µgcm-2) in comparison to reference formulation without observing any lag in drug permeation through the nail plate. The in vitro antifungal study data indicated increased antifungal efficacy relative to efinaconazole topical solution against Trichophyton rubrum, Trichophyton mentagrophytes, and Candida albicans species. Further, an in vitro cell cytotoxicity study exhibited no toxic effect for any excipients used in the formulation while applied on nail cells. Hence, the efinaconazole loaded microemulsion formulations could be considered as an effective therapy in the treatment of onychomycosis.
Subject(s)
Onychomycosis , Antifungal Agents/pharmacology , Antifungal Agents/therapeutic use , Arthrodermataceae , Emulsions , Humans , Nails , Onychomycosis/drug therapy , TriazolesABSTRACT
RNA interference (RNAi) has an unprecedented potential as a therapeutic strategy for reversibly silencing the expression of any gene. Therapeutic delivery of the RNAi mediator, i.e., small interfering RNA (siRNA), can be used to address diseases characterized by gene overexpression, for example inflammatory conditions like chronic obstructive pulmonary disease (COPD). Macrophages play a key role in COPD pathogenesis and are recruited to the airways and lung parenchyma, where they release proinflammatory cytokines, e.g., tumor necrosis factor-alpha (TNF-α). Hence, targeting TNF-α with siRNA is a promising therapeutic approach for COPD management. However, a safe and effective delivery system is required for delivery of TNF-α siRNA into the cytosol of hard-to-transfect macrophages. The purpose of this study was to optimize the intracellular delivery of TNF-α siRNA to the lipopolysaccharide-activated murine macrophage cell line RAW 264.7 using lipidoid-polymer hybrid nanoparticles (LPNs) composed of the lipid-like transfection agent lipidoid 5 (L5) and the biodegradable polymer poly (D,L-lactide-co-glycolide). Applying a quality-by-design approach, the influence of critical formulation variables, i.e., the L5 content and the L5:siRNA ratio (w/w), on critical quality attributes (CQAs) was investigated systematically using risk assessment and design of experiments, followed by delineation of an optimal operating space (OOS). The CQAs were identified based on the quality target product profile and included size, polydispersity index, zeta potential, encapsulation efficiency and loading for achieving efficient and safe TNF-α gene silencing in activated RAW 264.7 cells. Formulations inducing efficient gene silencing and low cytotoxicity were identified, and the optimal formulations displayed L5 contents of 15 and 20% (w/w), respectively, and an L5:siRNA weight ratio of 15:1. All tested formulations within the OOS mediated efficient and sequence-specific TNF-α gene silencing in RAW 264.7 cells at TNF-α-siRNA concentrations, which were significantly lower than the concentrations required of non-encapsulated TNF-α-siRNA, highlighting the benefit of the delivery system. The results also demonstrate that increasing the loading of siRNA into the delivery system does not necessarily imply enhanced gene silencing. This opens new avenues for further exploitation of LPNs as a robust platform technology for delivering TNF-α siRNA to macrophages, e.g., in the management of COPD.
ABSTRACT
Amphotericin B (AmB) is one of the most effective drugs used in the treatment of leishmaniasis and systemic fungal infections. Considering the global burden of leishmaniasis, â¼90% of disease cases occur in developing countries, suggestive of the need for an affordable AmB therapy. However, owing to the physicochemical properties of AmB, all the clinically available formulations must be administered by intravenous route, thereby creating a significant hurdle in patients' access to AmB due to pharmacoeconomic considerations. We have previously demonstrated that lipid conjugation (e.g., fatty acids) to AmB significantly decreases the toxicity of resulting prodrug by a favorable alteration in the aggregation pattern. The hypothesis of the present work was to investigate the potential of the previously established AmB-lipid conjugate [AmB-oleyl conjugate (AmB-OA)] in improving the physicochemical properties such as gastric instability and lower intestinal permeability that otherwise limits the oral delivery of AmB. The synthesized AmB-OA conjugate was remarkably stable at gastric pH in contrast to AmB and exhibited significantly higher permeation across the Caco-2 monolayer (indicative of intestinal permeability). Mechanistic studies revealed that AmB-OA retained an equivalent antifungal activity. Also, AmB-OA was found to interact preferentially with intracellular membranes of Saccharomyces cerevisiae, while AmB interacted with the plasma membrane. The results of Caco-2 monolayer permeation experiments were further confirmed by in vivo pharmacokinetics, which showed that AmB-OA exhibited a 3.13-fold increase in the Cmax and a 4.88-fold increase in AUCTot as compared to AmB. In conclusion, the lipid conjugation approach may provide an effective solution for current challenges in designing drug delivery systems intended for oral AmB therapy.
Subject(s)
Amphotericin B/chemistry , Amphotericin B/pharmacokinetics , Fatty Acids/chemistry , Gastrointestinal Tract/metabolism , Administration, Oral , Amphotericin B/pharmacology , Animals , Antifungal Agents/chemistry , Antifungal Agents/pharmacokinetics , Antifungal Agents/pharmacology , Biological Availability , Caco-2 Cells , Cell Line, Tumor , Cell Membrane/metabolism , Chemistry, Pharmaceutical/methods , Drug Delivery Systems/methods , Humans , Lipids/chemistry , Male , Rats, Sprague-Dawley , Saccharomyces cerevisiae/drug effectsABSTRACT
Understanding the release kinetics of siRNA from nanocarriers, their cellular uptake, their in vivo biodistribution and pharmacokinetics is a fundamental prerequisite for efficient optimisation of the design of nanocarriers for siRNA-based therapeutics. Thus, we investigated the influence of composition on the siRNA release from lipid-polymer hybrid nanoparticles (LPNs) consisting of cationic lipidoid 5 (L5) and poly(DL-lactic-co-glycolic acid) (PLGA) intended for pulmonary administration. An array of siRNA-loaded LPNs was prepared by systematic variation of: (i) the L5 content (10-20%, w/w), and (ii) the L5:siRNA ratio (10,1-30:1, w/w). For comparative purposes, L5-based lipoplexes, L5-based stable nucleic acid lipid nanoparticles (SNALPs). and dioleoyltrimethylammoniumpropane (DOTAP)-modified LPNs loaded with siRNA were also prepared. Release studies in buffer and lung surfactant-containing medium showed that siRNA release is dependent on the presence of both surfactant and heparin (a displacing agent) in the release medium, since these interact with the lipid shell structure thereby facilitating decomplexation of L5 and siRNA, as evident from the retarded siRNA release when the L5 content and the L5:siRNA ratio were increased. This confirms the hypothesis that siRNA loaded in LPNs is predominantly present as complexes with the cationic lipid and primarily is located near the particle surface. Cellular uptake and tolerability studies in the human macrophage cell line THP-1 and the type I-like human alveolar epithelial cell line hAELVi, which together represents a monolayer-based barrier model of lung epithelium, indicated that uptake of LPNs was much higher in THP-1 cells in agreement with their primary clearance role. In vivo biodistributions of formulations loaded with Alexa Fluor® 750-labelled siRNA after pulmonary administration in mice were compared by using quantitative fluorescence imaging tomography. The L5-modified LPNs, SNALPs and DOTAP-modified LPNs displayed significantly increased lung retention of siRNA as compared to L5-based lipoplexes, which had a biodistribution profile comparable to that of non-loaded siRNA, for which >50% of the siRNA dose permeated the air-blood barrier within 6â¯h and subsequently was excreted via the kidneys. Hence, the enhanced lung retention upon pulmonary administration of siRNA-loaded LPNs represents a promising characteristic that can be used to control the delivery of the siRNA cargo to lung tissue for local management of disease.
Subject(s)
Drug Carriers/chemistry , Lipids/chemistry , Lung/drug effects , Nanoparticles/chemistry , Polylactic Acid-Polyglycolic Acid Copolymer/chemistry , RNA, Small Interfering/administration & dosage , Administration, Inhalation , Animals , Drug Liberation , Epithelial Cells/drug effects , Epithelial Cells/metabolism , Gene Silencing , Humans , Lung/metabolism , Macrophages, Alveolar/drug effects , Macrophages, Alveolar/metabolism , Mice , Mice, Inbred BALB C , Models, Theoretical , RNA, Small Interfering/pharmacokinetics , THP-1 Cells , Tissue DistributionABSTRACT
BACKGROUND: With the recent approval of the first small interfering RNA (siRNA) therapeutic formulated as nanoparticles, there is increased incentive for establishing the factors of importance for the design of stable solid dosage forms of such complex nanomedicines. METHODS: The aims of this study were: (i) to identify factors of importance for the design of spray-dried siRNA-loaded lipidoid-poly(DL-lactic-co-glycolic acid) hybrid nanoparticles (LPNs), and (ii) to evaluate their influence on the resulting powders by using a quality-by-design approach. Critical formulation and process parameters were linked to critical quality attributes (CQAs) using design of experiments, and an optimal operating space (OOS) was identified. RESULTS: A series of CQAs were identified based on the quality target product profile. The loading (ratio of LPNs to the total solid content) and the feedstock concentration were determined as critical parameters, which were optimized systematically. Mannitol was chosen as stabilizing excipient due to the low water content of the resulting powders. The loading negatively affected the colloidal stability of the LPNs, whereas feedstock concentration correlated positively with the powder particle size. The optimal mannitol-based solid formulation, defined from the OOS, displayed a loading of 5% (w/w), mass median aerodynamic diameter of 3.3 ± 0.2 µm, yield of 60.6 ± 6.6%, and a size ratio of 1.15 ± 0.03. Dispersed micro-embedded LPNs had preserved physicochemical characteristics as well as in vitro siRNA release profile and gene silencing, as compared to non-spray-dried LPNs. CONCLUSION: The optimal solid dosage forms represent robust formulations suitable for higher scale-up manufacturing.
Subject(s)
Desiccation/methods , Lipids/chemistry , Nanoparticles/chemistry , Polylactic Acid-Polyglycolic Acid Copolymer/chemistry , RNA, Small Interfering/chemistry , Administration, Inhalation , Animals , Drug Compounding , Excipients/chemistry , Gene Silencing , Gene Transfer Techniques , Mannitol/chemistry , Mice , Nanomedicine , Particle Size , Powders , RAW 264.7 Cells , RNA, Small Interfering/administration & dosage , Solubility , Solvents/chemistryABSTRACT
Rheumatoid arthritis (RA) is a common autoimmune disease, which is characterized by painful chronic inflammation in the joints, and novel safe and efficacious treatments are urgently needed. RNA interference (RNAi) therapy based on small interfering RNA (siRNA) is a promising approach for silencing specific genes involved in inflammation. However, delivery of siRNA to the target site, i.e. the cytosol of immune cells, is a challenge. Here, we designed lipid-polymer hybrid nanoparticles (LPNs) composed of lipidoid and poly(DL-lactic-co-glycolic acid) loaded with a therapeutic cargo siRNA directed against the proinflammatory cytokine tumor necrosis factor (TNF), which plays a key role in the progression of RA. We compared their efficacy and safety with reference lipidoid-based stable nucleic acid lipid particles (SNALPs) in vitro and in vivo. Cryogenic transmission electron microscopy, atomic force microscopy and small-angle X-ray scattering revealed that the mode of loading of siRNA in lamellar structures differs between the two formulations. Thus, siRNA was tightly packed in LPNs, while LPNs displayed lower adhesion than SNALPs. The LPNs mediated a higher TNF silencing effect in vitro than SNALPs in the RAW 264.7 macrophage cell line activated with lipopolysaccharide. For both types of delivery systems, macropinocytosis was involved in cellular uptake. In addition, clathrin-mediated endocytosis contributed to uptake of SNALPs. LPNs loaded with TNF siRNA mediated sequence-specific suppression of inflammation in a murine experimental arthritis model upon intra-articular administration. Hence, the present study demonstrates that LPN-mediated TNF knockdown constitutes a promising approach for arthritis therapy of TNF-mediated chronic inflammatory conditions.
Subject(s)
Arthritis, Experimental/drug therapy , Inflammation/drug therapy , Lipids/chemistry , Nanoparticles/chemistry , Polymers/chemistry , RNA, Small Interfering/chemistry , Tumor Necrosis Factor-alpha/chemistry , Animals , Arthritis, Rheumatoid/drug therapy , Cell Line , Drug Compounding/methods , Female , Gene Silencing/physiology , Humans , Injections, Intra-Articular/methods , Mice , Mice, Inbred BALB C , Polylactic Acid-Polyglycolic Acid Copolymer/chemistry , RAW 264.7 Cells , RNA Interference/physiology , RNA, Small Interfering/administration & dosage , Tumor Necrosis Factor-alpha/administration & dosageABSTRACT
RNA interference (RNAi) therapeutics are one of the most promising biological interventions in the efficient management of difficult-to-treat diseases. RNAi is mediated by small interfering RNA (siRNA), which induces specific and highly potent gene silencing. However, intracellular delivery of exogenous, chemically synthesized siRNA to the RNAi pathway in the cytosol remains a challenge, and is fully dependent on technologies that can facilitate cytosolic delivery without undesired side effects. One example is a novel delivery system referred to as lipidoid-polymer hybrid nanoparticles (LPNs), which we recently showed mediates highly efficient and safe gene silencing. Here we describe a double emulsion solvent evaporation method for the preparation of siRNA-loaded LPNs and methodologies employed for their physicochemical characterization and biological performance. A solution of siRNA in aqueous buffer is emulsified by sonication with an organic phase containing lipid and polymer into a primary emulsion. Subsequently, the primary emulsion is emulsified with a secondary water phase containing polyvinyl alcohol by sonication, and the organic phase is evaporated, eventually resulting in LPNs. The physicochemical characterization includes determination of (1) hydrodynamic particle size distribution, (2) zeta potential, (3) siRNA encapsulation efficiency, and (4) practical siRNA loading. The transfection experiments are conducted in a cell-based model system using enhanced green fluorescence protein as reporter. The gene silencing effect is also confirmed at the mRNA level by reverse transcription polymerase chain reaction (RT-PCR). The effect of the siRNA-loaded LPNs on cell viability is measured using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay.
Subject(s)
Lipids/chemistry , Nanoparticles/chemistry , Polyvinyl Alcohol/chemistry , Transfection/methods , Cell Line, Tumor , Cell Survival/drug effects , Cell Survival/genetics , Cytosol , Emulsions , Humans , Particle Size , RNA Interference , RNA, Small Interfering/chemistry , RNA, Small Interfering/genetics , Sonication/instrumentation , Sonication/methodsABSTRACT
Corticosteroid resistance poses a major challenge to effective treatment of chronic obstructive pulmonary diseases. However, corticosteroid resistance can be overcome by co-administration of theophylline. The aim of this study was to formulate the corticosteroid budesonide with theophylline into inhalable dry powders intended for pulmonary combination therapy. Four types of spray-dried powders were prepared: (i) budesonide and theophylline co-dissolved and processed using a 2-fluid nozzle spray drier, (ii) budesonide nanocrystals and dissolved theophylline co-dispersed and processed using a 2-fluid nozzle spray drier, (iii) dissolved budesonide and dissolved theophylline processed using a 3-fluid nozzle spray drier, and (iv) budesonide nanocrystals and dissolved theophylline processed using a 3-fluid nozzle spray drier. Spray drying from the solutions resulted in co-amorphous (i) and partially amorphous powders (iii), whereas spray drying of the nanosuspensions resulted in crystalline products (ii and iv). Even though budesonide was amorphous in (i) and (iii), it failed to exhibit any dissolution advantage over the unprocessed budesonide. In contrast, the dissolution of budesonide from its nanocrystalline formulations, i.e., (ii) and (iv), was significantly higher compared to a physical mixture or unprocessed budesonide. Furthermore, the spray-dried powders obtained from the 2-fluid nozzle spray drier, i.e., (i) and (ii), exhibited co-deposition of budesonide and theophylline at the same weight ratio in the aerodynamic assessment using the New Generation Impactor. In contrast, the depositions of budesonide and theophylline deviated from the starting weight ratio in the aerodynamic assessment of spray-dried powders obtained from the 3-fluid nozzle spray drier, i.e., (iii) and (iv). Based on these results, the powders spray-dried from the suspension by using the 2-fluid nozzle spray drier, i.e., (ii), offered the best formulation properties given the physically stable crystalline solid-state properties and the co-deposition profile.
Subject(s)
Bronchodilator Agents/administration & dosage , Bronchodilator Agents/chemistry , Budesonide/administration & dosage , Budesonide/chemistry , Powders , Theophylline/administration & dosage , Theophylline/chemistry , Administration, Inhalation , Dosage Forms , Drug Combinations , Drug Therapy, Combination , Dry Powder Inhalers , Humans , Lung , Particle Size , SuspensionsABSTRACT
BACKGROUND: Antisense oligonucleotides (ASOs) are promising therapeutics for specific modulation of cellular RNA function. However, ASO efficacy is compromised by inefficient intracellular delivery. Lipid-polymer hybrid nanoparticles (LPNs) are attractive mediators of intracellular ASO delivery due to favorable colloidal stability and sustained release properties. METHODS: LPNs composed of cationic lipidoid 5 (L5) and poly(DL-lactic-co-glycolic acid) were studied for delivery of an ASO mediating splice correction of a luciferase gene transcript (Luc-ASO). Specific purposes were: (i) to increase the mechanistic understanding of factors determining the loading of ASO in LPNs, and (ii) to optimise the LPNs and customise them for Luc-ASO delivery in HeLa pLuc/705 cells containing an aberrant luciferase gene by using a quality-by-design approach. Critical formulation variables were linked to critical quality attributes (CQAs) using risk assessment and design of experiments, followed by delineation of an optimal operating space (OOS). RESULTS: A series of CQAs were identified based on the quality target product profile. The L5 content and L5:Luc-ASO ratio (w/w) were determined as critical formulation variables, which were optimised systematically. The optimised Luc-ASO-loaded LPNs, defined from the OOS, displayed high loading and mediated splice correction at well-tolerated, lower doses as compared to those required for reference L5-based lipoplexes, L5-modified stable nucleic acid lipid nanoparticles or LPNs modified with dioleoyltrimethylammonium propane (conventional cationic lipid). CONCLUSIONS: The optimal Luc-ASO-loaded LPNs represent a robust formulation that mediates efficient intracellular delivery of Luc-ASO. This opens new avenues for further development of LPNs as a broadly applicable technology platform for delivering nucleic acid cargos intracellularly.
Subject(s)
Drug Delivery Systems , Nanoparticles/chemistry , Oligonucleotides, Antisense/administration & dosage , RNA Splicing/genetics , Technology, Pharmaceutical/methods , Delayed-Action Preparations/administration & dosage , Genetic Therapy/methods , HeLa Cells , Humans , Lipids/chemistry , Luciferases/genetics , Polylactic Acid-Polyglycolic Acid Copolymer/chemistryABSTRACT
PURPOSE: The spray drying process is widely applied for pharmaceutical particle engineering. The purpose of this study was to investigate advantages and disadvantages of two-fluid nozzle and three-fluid nozzle spray drying processes to formulate inhalable dry powders. METHODS: Budesonide nanocomposite microparticles (BNMs) were prepared by co-spray drying of budesonide nanocrystals suspended in an aqueous mannitol solution by using a two-fluid nozzle spray drying process. Budesonide-mannitol microparticles (BMMs) were prepared by concomitant spray drying of a budesonide solution and an aqueous mannitol solution using a spray drier equipped with a three-fluid nozzle. The resulting dry powders were characterized by using X-ray powder diffraction (XRPD), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA) and Raman microscopy. A Next Generation Impactor was used to evaluate the aerodynamic performance of the dry powders. RESULTS: XRPD and DMA results showed that budesonide remained crystalline in the BNMs, whereas budesonide was amorphous in the BMMs. Spray drying of mannitol into microparticles resulted in a crystalline transformation of mannitol, evident from XRPD, DSC and Raman spectroscopy analyses. Both BMMs and BNMs displayed a faster dissolution rate than bulk budesonide. The yield of BNMs was higher than that of BMMs. The mass ratio between budesonide and mannitol was preserved in the BNMs, whereas the mass ratio in the BMMs was higher than the theoretical ratio. CONCLUSIONS: Spray drying is an enabling technique for preparation of budesonide amorphous solid dispersions and nanocrystal-embedded microparticles. Two-fluid nozzle spray drying is superior to three-fluid nozzle spray drying in terms of yield.
Subject(s)
Desiccation/methods , Dry Powder Inhalers/methods , Nanoparticles/chemistry , Powders/chemistry , Administration, Inhalation , Budesonide/chemistry , Chemistry, Pharmaceutical , Excipients/chemistry , Humans , Mannitol/chemistry , Particle Size , Surface Properties , Technology, Pharmaceutical , WaterABSTRACT
With recent advances in the field of RNAi-based therapeutics, it is possible to make any target gene 'druggable', at least in principle. The present review focuses on aspects critical for pulmonary delivery of formulations of nucleic acid-based drugs. The first part introduces the therapeutic potential of RNAi-based drugs for the treatment of lung diseases. Subsequently, we discuss opportunities for formulation-enabled pulmonary delivery of RNAi drugs in light of key physicochemical properties and physiological barriers. In the following section, an overview is included of methodologies for imparting inhalable characteristics to nucleic acid formulations. Finally, we review one of the bottlenecks in the early preclinical testing of inhalable nucleic acid-based formulations, in other words, devices suitable for pulmonary administration of powder-based formulations in rodents.
Subject(s)
Genetic Therapy/methods , Lung Diseases/drug therapy , Oligonucleotides, Antisense/administration & dosage , RNA, Small Interfering/administration & dosage , Administration, Inhalation , Animals , Disease Models, Animal , Dry Powder Inhalers , Humans , Lung Diseases/genetics , Mice , Oligonucleotides, Antisense/chemistry , Oligonucleotides, Antisense/genetics , Powders , RNA Interference , RNA, Small Interfering/chemistry , RNA, Small Interfering/genetics , RatsABSTRACT
Poorly soluble vitamin K cannot be absorbed by patients suffering from cholestasis due to extremely low level of bile salts in the intestine. A formulation of vitamin K including glycocholic acid (i.e. Konakion® MM), does not increase bioavailability because it is unstable due to protonation of glycocholic acid at gastric pH. To develop a stable formulation, saponins were introduced as neutral surfactants to (partly) replace glycocholic acid. Experimental design was made to investigate the effect of the composition on particle size at neutral pH and upon acidification at pH 1.5. Two formulations that were within the optimized composition window were loaded with vitamin K and those showed superior stability at low pH as compared to Konakion® MM: sizes were between 43 and 46â¯nm at pH 7.3 and between 46 and 58â¯nm after 1â¯h incubation at pH 1.5, respectively, but large aggregates were formed at pH 1.5 in presence of Konakion® MM. Micelles were cytocompatible with Caco-2 cells at concentration of surfactants (saponins and glycocholic acid) up to 0.15â¯mg/ml. Uptake of vitamin K by Caco-2 cells was 4.2-4.9â¯nmol/mg protein for saponins-containing formulations and 7.1â¯nmol/mg protein for Konakion® MM. This, together with the superior stability at low pH, makes saponins-containing mixed micelles promising oral formulations for vitamin K.
Subject(s)
Micelles , Saponins/chemistry , Vitamin K/administration & dosage , Administration, Oral , Caco-2 Cells , Cell Survival , Humans , Hydrogen-Ion Concentration , Vitamin K/chemistry , Vitamin K/metabolismABSTRACT
Therapeutics based on small interfering RNA (siRNA) have promising potential as antiviral and anti-inflammatory agents. To deliver siRNA across cell membranes to reach the RNAi pathway in the cytosol of target cells, non-viral nanoparticulate delivery approaches are explored. Recently, we showed that encapsulation of siRNA in lipid-polymer hybrid nanoparticles (LPNs), based on poly(DL-lactic-co-glycolic acid) (PLGA) and cationic lipid-like materials (lipidoids), remarkably enhances intracellular delivery of siRNA as compared to siRNA delivery with LPNs modified with dioleoyltrimethylammoniumpropane (DOTAP) as the lipid component. However, the potential immune modulation by these cationic lipids remains unexplored. By testing lipidoids and DOTAP for innate immune-receptor-activating properties in vitro, we found that neither lipidoids nor DOTAP activate human Toll-like receptor (TLR) 2, 3, 7, and 9. However, in contrast to DOTAP, lipidoids are strong agonists for TLR4 and activate murine antigen-presenting cells in vitro. This agonistic effect was further confirmed in silico using a prediction model based on crystal structures. Also, lipidoids formulated as lipoplexes or as stable nucleic acid lipid particles, which was the reference formulation for siRNA delivery, proved to activate TLR4. However, by combining lipidoids with PLGA into LPNs, TLR4 activation was abrogated. Thus, lipidoid-mediated TLR4 activation during siRNA delivery may be modulated via optimization of the formulation design.
ABSTRACT
Amphotericin B is an antimicrobial membrane-acting drug used in the treatment of systemic fungal infections. However, the clinical utility of AmB is often low as a result of (i) dose-limiting toxicity which is closely associated with its aggregation wherein the selectivity for its target i.e. ergosterol in fungal membranes is diminished and (ii) limited oral bioavailablity. The latter is attributed to the unfavorable physicochemical properties of the AmB e.g., low solubility, gastrointestinal instability, and poor intestinal permeability. The hypothesis of present work was that by applying a lipid conjugation approach the aggregation induced toxicity of AmB vis-à-vis permeability can be overcome. From the array of fatty acids, the oleic acid (OA) was selected for conjugation due to its great impact on increasing the Caco-2 permeability of AmB. AmB-OA conjugate was synthesized using standard carbodiimide chemistry and characterized thoroughly. Due to the reported strong correlation between the self-aggregation of AmB and toxicity, the aggregation behavior of AmB and AmB-OA was studied by in silico modeling and confirmed experimentally. In vitro hemolytic studies and viability assays in kidney cells (HEK 293 cells) suggested that AmB in aggregated was state highly toxic but not AmB-OA. In silico modeling suggested possible aggregation conformation of AmB-OA dimers that retains the selectivity for cholesterol even in aggregated state when embedded in in silico generated lipid bilayers. The results were further confirmed by assessing the interactions of monomeric and aggregated state of AmB and AmB-OA with that of cholesterol and ergosterol containing liposomes employing circular dichroism spectroscopy. The findings were subsequently corroborated by in vivo nephrotoxicity studies. To conclude, the lipid conjugation approach may be a promising strategy for reducing the dose-limiting toxicity of AmB.
Subject(s)
Amphotericin B/chemistry , Antifungal Agents/chemistry , Oleic Acid/chemistry , Amphotericin B/administration & dosage , Amphotericin B/toxicity , Animals , Antifungal Agents/administration & dosage , Antifungal Agents/toxicity , Apoptosis/drug effects , Cell Survival/drug effects , Cholesterol/chemistry , Computer Simulation , Creatinine/blood , Ergosterol/chemistry , Female , HEK293 Cells , Hemolysis/drug effects , Humans , Kidney/drug effects , Kidney/pathology , Liposomes , Mice , Models, Molecular , Oleic Acid/administration & dosage , Oleic Acid/toxicity , Urea/bloodABSTRACT
Chronic obstructive pulmonary disease (COPD) is a complex disease, characterized by persistent airflow limitation and chronic inflammation. The purpose of this study was to design lipid-polymer hybrid nanoparticles (LPNs) loaded with the corticosteroid, budesonide, which could potentially be combined with small interfering RNA (siRNA) for COPD management. Here, we prepared LPNs based on the biodegradable polymer poly(dl-lactic-co-glycolic acid) (PLGA) and the cationic lipid dioleyltrimethylammonium propane (DOTAP) using a double emulsion solvent evaporation method. A quality-by-design (QbD) approach was adopted to define the optimal formulation parameters. The quality target product profile (QTPP) of the LPNs was identified based on risk assessment. Two critical formulation parameters (CFPs) were identified, including the theoretical budesonide loading and the theoretical DOTAP loading. The CFPs were linked to critical quality attributes (CQAs), which included the intensity-based hydrodynamic particle diameter (z-average), the polydispersity index (PDI), the zeta-potential, the budesonide encapsulation efficiency, the actual budesonide loading and the DOTAP encapsulation efficiency. A response surface methodology (RSM) was applied for the experimental design to evaluate the influence of the CFPs on the CQAs, and to identify the optimal operation space (OOS). All nanoparticle dispersions displayed monodisperse size distributions (PDI<0.2) with z-averages of approximately 150nm, suggesting that the size is not dependent on the investigated CFPs. In contrast, the zeta-potential was highly dependent on the theoretical DOTAP loading. Upon increased DOTAP loading, the zeta-potential reached a maximal point, after which it remained stable at the maximum value. This suggests that the LPN surface is covered by DOTAP, and that the DOTAP loading is saturable. The actual budesonide loading of the LPNs was mainly dependent on the initial amount of budesonide, and a clear positive effect was observed, which shows that the interaction between drug and PLGA increases when increasing the initial amount of budesonide. The OOS was modeled by applying the QTPP. The OOS had a budesonide encapsulation efficiency higher than 30%, a budesonide loading above 15µg budesonide/mg PLGA, a zeta-potential higher than 35mV and a DOTAP encapsulation efficiency above 50%. This study shows the importance of systematic formulation design for understanding the effect of formulation parameters on the characteristics of LPNs, eventually resulting in the identification of an OOS.
Subject(s)
Anti-Inflammatory Agents/chemical synthesis , Budesonide/chemical synthesis , Chemical Engineering/methods , Nanoparticles/chemistry , Polymers/chemical synthesis , Quality Control , Anti-Inflammatory Agents/administration & dosage , Budesonide/administration & dosage , Fatty Acids, Monounsaturated/administration & dosage , Fatty Acids, Monounsaturated/chemical synthesis , Lipids , Nanoparticles/administration & dosage , Polymers/administration & dosage , Quaternary Ammonium Compounds/administration & dosage , Quaternary Ammonium Compounds/chemical synthesisABSTRACT
Medicines based on small interfering RNA (siRNA) are promising for the treatment of a number of lung diseases. However, efficient delivery systems and design of stable dosage forms are required for inhalation therapy, as well as cost-effective methods for manufacturing of the final product. In this study, a 3D-printed micromixer was used for preparation of siRNA-dendrimer nanocomplexes, which were subsequently processed into microparticle-based dry powders for inhalation using spray drying. By applying the disposable micromixer, nanocomplexes were prepared of an average hydrodynamic diameter comparable to that of nanocomplexes prepared by manual mixing, but with narrower size distribution and low batch-to-batch variation. The nanocomplexes were processed into nanoembedded microparticles using different saccharide excipients. Data showed that siRNA integrity and bioactivity are retained after processing, and nanocomplexes could be reconstituted from the dry powders. The amorphous saccharide excipients trehalose and inulin provided better stabilization than crystalline mannitol, and they enabled full reconstitution of the nanocomplexes. In particular, a binary mixture of trehalose and inulin showed optimal stabilization, and enhanced cellular uptake and gene silencing efficiency. This study demonstrates that inexpensive and scalable micromixers can be used to optimize the production of siRNA-dendrimer nanocomplexes, and they can be applied in combination with spray drying for the engineering of dry powder formulations suitable for delivery of siRNA to the therapeutic target site.
Subject(s)
Nanoparticles/chemistry , Pharmaceutical Preparations/chemistry , RNA, Small Interfering/chemistry , Administration, Inhalation , Dosage Forms , Excipients/chemistry , Gene Silencing/drug effects , Inulin/chemistry , Mannitol/chemistry , Microfluidics/methods , Particle Size , Powders/chemistry , Trehalose/chemistryABSTRACT
Safety and efficacy of therapeutics based on RNA interference, e.g., small interfering RNA (siRNA), are dependent on the optimal engineering of the delivery technology, which is used for intracellular delivery of siRNA to the cytosol of target cells. We investigated the hypothesis that commonly used and poorly tolerated cationic lipids might be replaced with more efficacious and safe lipidoids as the lipid component of siRNA-loaded lipid-polymer hybrid nanoparticles (LPNs) for achieving more efficient gene silencing at lower and safer doses. However, formulation design of such a complex formulation is highly challenging due to a strong interplay between several contributing factors. Hence, critical formulation variables, i.e. the lipidoid content and siRNA:lipidoid ratio, were initially identified, followed by a systematic quality-by-design approach to define the optimal operating space (OOS), eventually resulting in the identification of a robust, highly efficacious and safe formulation. A 17-run design of experiment with an I-optimal approach was performed to systematically assess the effect of selected variables on critical quality attributes (CQAs), i.e. physicochemical properties (hydrodynamic size, zeta potential, siRNA encapsulation/loading) and the biological performance (in vitro gene silencing and cell viability). Model fitting of the obtained data to construct predictive models revealed non-linear relationships for all CQAs, which can be readily overlooked in one-factor-at-a-time optimization approaches. The response surface methodology further enabled the identification of an OOS that met the desired quality target product profile. The optimized lipidoid-modified LPNs revealed more than 50-fold higher in vitro gene silencing at well-tolerated doses and approx. a twofold increase in siRNA loading as compared to reference LPNs modified with the commonly used cationic lipid dioleyltrimethylammonium propane (DOTAP). Thus, lipidoid-modified LPNs show highly promising prospects for efficient and safe intracellular delivery of siRNA.
Subject(s)
Gene Silencing/drug effects , Lactic Acid/chemistry , Lipids/chemistry , Nanoparticles/chemistry , Polyglycolic Acid/chemistry , Polymers/chemistry , RNA, Small Interfering/chemistry , Cations/chemistry , Cell Line, Tumor , Cell Survival/drug effects , Chemistry, Pharmaceutical/methods , Drug Delivery Systems/methods , Fatty Acids, Monounsaturated/chemistry , Humans , Polylactic Acid-Polyglycolic Acid Copolymer , Quaternary Ammonium Compounds/chemistry , RNA Interference/drug effectsABSTRACT
The present study evaluates the prophylactic efficacy of α-tocopherol (α-TOH), resveratrol (RES), and coenzyme Q10 (CoQ10) co-loaded self-nanoemulsifying drug delivery system (α-TOH-RES-CoQ10 SNEDDS) in 7,12-Dimethylbenz[a]anthracene (DMBA) induced breast cancer model. SNEDDS formulation components were rationally selected and optimized for maximum drug loading by applying the design of experiments and further evaluated for stability in simulated gastrointestinal fluids, functional stability of antioxidants, in vitro release, Caco-2 cell uptake, oral bioavailability and prophylactic anticancer activity. The SNEDDS demonstrated excellent stability in stimulated gastrointestinal fluids. The functional activity of antioxidants was confirmed by 2,2-diphenylpicrylhydrazyl (DPPH) scavenging assay wherein significantly (p > .05) higher antioxidant activity was observed in case of SNEDDS as compared with free antioxidants. Coumarin 6 (C-6)-loaded SNEDDS formulation demonstrated remarkably higher Caco-2 cell uptake in comparison with free C-6, indicative of efficient internalization of sub-micron SNEDDS droplets by Caco-2 cells. In line with Caco-2 cell uptake observations, α-TOH-RES-CoQ10-SNEDDS showed â¼2.30- and â¼3.64-fold increase in the AUC0-∞ values of RES and CoQ10 in comparison with free antioxidants. Significantly lower (p < .001) tumor volume (â¼327 mm3) was found in case of animals treated with α-TOH-RES-CoQ10-SNEDDS in comparison with free antioxidant combination (â¼1070 mm3) and DMBA control (â¼1540 mm3) groups. Conclusively, the proposed strategy posed great potential in improving the prophylactic activity of antioxidants and hold promise for further exploration.