Study on load allocation of land-based total nitrogen in the Bohai Sea.

Total nitrogen (TN) is one of the terrigenous pollutants in the Bohai Sea. A reasonable releasing scheme can effectively improve the seawater quality. Based on the observed TN concentrations and the national pollution control requirements, the TN load ratios of four major rivers around the Bohai Sea are adjusted in multiple levels within the range of 50 %-200 % in the frame of total control. Then, a pollutant transport model is used to evaluate each load allocation scheme by calculating the area of different seawater qualities. The optimum scheme is loads of the Yellow River and Luan River are set to 50 % and 200 % of the levels in 2018, and thus the area of heavily polluted seawater can be decreased by 33.14 %. Additionally, the reasonable TN reduction amounts of four major rivers in 2018-2020 are calculated according to the optimum scheme, which can be provided as a decision-making basis of marine managements.

Effect of exogenous organic acids on chemical compositions and sensory attributes of fortified sweet wines from dehydrated grapes.

In this study, acidity was regulated with the addition of exogenous tartaric acid and citric acid before bottling. The effect of exogenous organic acids on chemical compositions and sensory attributes of fortified sweet wines from dehydrated grapes were investigated. The results indicated that exogenous organic acids promoted the conversion of monomeric anthocyanins to copigmented anthocyanins in wines. Specifically, the combination of malvidin-3-O-glucoside and flavanols (catechin and epicatechin) was facilitated to form copigmented anthocyanins. Sensory analysis suggested that exogenous organic acids improved the balance of sugar and acidity and benefited the harmony in wines on the taste. Wines with a residual sugar and titratable acidity ratio of about 11:1 exhibited the more harmonious taste. In addition, it was also observed changes in the aroma profile related to volatile compounds, namely, more intense fruity aroma in wines with the addition of organic acids.

Multi-omics analysis reveals PUS1 triggered malignancy and correlated with immune infiltrates in NSCLC.

Non-small cell lung cancer (NSCLC) is the main pathological type of lung cancer. In this study, multi-omics analysis revealed a significant increase of pseudouridine synthase 1 (PUS1) in NSCLC and the high expression of PUS1 was associated with shorter OS (Overall Survival), PFS (Progression Free Survival), and PPS (Post Progression Survival) of NSCLC patients. Clinical subgroup analysis showed that PUS1 may be involved in the occurrence and development of NSCLC. Besides, TIMER, ESTIMATE, and IPS analysis suggested that PUS1 expression was associated with immune cell infiltration, and the expression of PUS1 was significantly negatively correlated with DC cell infiltration. GESA analysis also indicated PUS1 may involve in DNA_REPAIR, E2F_TARGETS, MYC_TARGETS_V2, G2M_CHECKPOINT and MYC_TARGETS_V1 pathways and triggered NSCLC malignancy through MCM5 or XPO1. Furthermore, PUS1 may be a potential target for NSCLC therapy.

Electrochemical Enhancement of Lithium-Ion Diffusion in Polypyrrole-Modified Sulfurized Polyacrylonitrile Nanotubes for Solid-to-Solid Free-Standing Lithium-Sulfur Cathodes.

The energy density of lithium-sulfurized polyacrylonitrile (Li-SPAN) batteries has chronically suffered from low sulfur content. Although a free-standing electrode can significantly reduce noncapacity mass contribution, the slow bulk reaction kinetics still constrain the electrochemical performance. In this regard, a novel electrochemically active additive, polypyrrole (PPy), is introduced to construct PAN nanotubes as a sulfur carrier. This hollow channel greatly facilitates charge transport within the electrode and increases the sulfur content. Both electrochemical tests and simulations show that the SPANPPy-1% cathode possesses a larger lithium-ion diffusion coefficient and a more homogeneous phase interface than the SPAN cathode. Consequently, significantly improved capabilities and rate properties are achieved, as well as decent exportations under high-sulfur-loading or lean-electrolyte conditions. In-situ and semi-situ characterizations are further performed to demonstrate the nucleation growth of lithium sulfide and the evolution of the electrode surface structure. This type of electrochemically active additive provides a well-supported implementation of high-energy-density Li-S batteries.

Stilbenes: A new strategy for protecting light-sensitive foods, a review of their structure classification and singlet oxygen quenching mechanism.

Natural stilbenes have been studied extensively as a result of their complicated structures and diverse biological activities. Singlet oxygen (1O2), a kind of reactive oxygen species (ROS) has a strong destructive effect on food systems (especially for light-sensitive foods). Many cutting-edge scientific studies have found that some stilbenes not only have extensive quenching properties for ROS, but also can selectively quench 1O2. However, the industry devoted too much energy on the development of more new stilbenes, lacking in-depth summaries and reflections on the characteristics of their basic structure and the mechanism of their extraordinary 1O2 quenching abilities. Therefore, we summarized the classification methods for stilbene compounds and evaluated similarities, differences and possible limitations of different classification methods. In addition, we described the role of different functional groups in stilbenes in quenching of 1O2 and summarized the quenching mechanism of 1O2 by stilbenes. By the way, the current application of stilbene compounds and their potential risks in the food industry were also mentioned in this article. The stilbenes can be used as antioxidants (especially new strategies against 1O2 oxidation) in food systems to improve the shelf life. At this stage, it is necessary to develop more effective and safe food antioxidant stilbenes based on their quenching mechanism.

A Metal-Organic Framework Based Quasi-Solid-State Electrolyte Enabling Continuous Ion Transport for High-Safety and High-Energy-Density Lithium Metal Batteries.

Solid-state lithium metal batteries are promising next-generation rechargeable energy storage systems. However, the poor compatibility of the electrode/electrolyte interface and the low lithium ion conductivity of solid-state electrolytes are key issues hindering the practicality of solid-state electrolytes. Herein, rational designed metal-organic frameworks (MOFs) with the incorporation of two types of ionic liquids (ILs) are fabricated as quasi-solid electrolytes. The obtained MOF-IL electrolytes offer continuous ion transport channels with the functional sulfonic acid groups serving as lithium ion hopping sites, which accelerate the Li+ transport both in the bulk and at the interfaces. The quasi-solid MOF-IL electrolytes exhibit competitive ionic conductivities of over 3.0 × 10-4 S cm-1 at room temperature, wide electrochemical windows over 5.2 V, and good interfacial compatibility, together with greatly enhanced Li+ transference numbers compared to the bare IL electrolyte. Consequently, the assembled quasi-solid Li metal batteries show either superior stability at low C rates or improved rate performance, related to the species of ILs. Overall, the quasi-solid MOF-IL electrolytes possess great application potential in high-safety and high-energy-density lithium metal batteries.

Efficient binding paradigm of protein and polysaccharide: Preparation of isolated soy protein-chitosan quaternary ammonium salt complex system and exploration of its emulsification potential.

Soy protein isolate (SPI) has good emulsifying ability, but is greatly affected by the environment. The addition of polysaccharides either increases or decreases the stability of SPI. We report and prepared for the first time SPI/HACC complexes with different polysaccharide contents (SPI/HACC ratios are 1:1, 2:1 and 5:1). The binding properties, microstructure and emulsifying properties of the SPI/HACC complexes were determined and analyzed. The results showed that the interaction them is mainly through hydrogen bonding, electrostatic interaction, hydrophobic interaction and steric hindrance effect. The combination of SPI and HACC overcomes their respective limitations and the microstructure is more flat and smooth. It was also found that the emulsifying ability and concentration of SPI showed a certain correlation and the addition of HACC significantly improved the emulsifying ability and storage stability of SPI. This study shows that the prepared SPI/HACC complex has great potential for application in the food industry.

Graphdiyne-like Porous Organic Framework as a Solid-Phase Sulfur Conversion Cathodic Host for Stable Li-S Batteries.

As a unique branch of Li-S batteries, solid-phase sulfur conversion polymer cathodes have shown superior stability with fast ion-transfer kinetics and high discharge capacities owing to the mere existence of short-chain sulfur species during charging/discharging. However, representative compounds such as sulfurized polyacrylonitrile (SPAN) and polyaniline (SPANI) suffer from low sulfur contents and poor cycling performances under large current densities due to the sulfurization occurring only on polymers' surface. Here, a graphdiyne-like porous organic framework, denoted as GPOF, is synthesized and used as a host for enabling solid-phase sulfur conversion. Plenty of unsaturated bonds in GPOF provide sufficient reaction sites to bind sulfur chains, resulting in a high active sulfur content in the cathode. Moreover, the microporous GPOF possesses suitable cavities to accommodate the volume expansion, leading to favorable long-term cycling stability. As a result, the sulfurized GPOF cathode (SGPOF-320) displays outstanding electrochemical stability with negligible capacity decline after 250 cycles at 0.2 C with an average discharge capacity of 925 mA h g-1. Our work applies a facile procedure to produce sulfur conversion porous polymer cathodes, which could provide a proper way for exploring more suitable cathode materials for high-performance Li-S batteries.

Alginate with citrus pectin and pterostilbene as healthy food packaging with antioxidant property.

A new type of film packaging made from natural polysaccharide materials, with its environmental safety and friendliness, is considered as a potential substitute for plastics. Novel polysaccharide composite films based upon citrus pectin (CP) and sodium alginate (SA) were successfully prepared and characterized, containing pterostilbene (PTE) at various concentrations (0.2, 0.4, 0.8, 1.6, 3.2 mM). The rheological analysis displayed that all film-forming liquids performed no gelation behavior with G" > G' at low frequency and weak gelation with G" < G' at high frequency. The SA-CP films had good tensile strength (TS) and elongation at break (EB), while adding PTE as an antioxidant to the film reduced both the values. Of note, the SA-CP films with PTE had better moisture resistance than that of the pure SA-CP films, which was related to the changes of its microstructure. The increased roughness of the films containing PTE was observed by microscope. After calcium chloride cross-linking, the water solubility of the films was reduced, while its thermal stability was improved. Notably, the accretion of PTE expressively enhanced the antioxidant properties of the SA-CP films. Thus, the SA-CP composite films containing PTE could be utilized as an excellent antioxidant packaging material.

Stabilizing a Lithium Metal Battery by an In Situ Li2S-modified Interfacial Layer via Amorphous-Sulfide Composite Solid Electrolyte.

A novel strategy has been proposed to produce in situ Li2S at the interfacial layer between lithium anode and the solid electrolyte, by using an amorphous-sulfide-LiTFSI-poly(vinylidene difluoride) (PVDF) composite solid electrolyte (SLCSE). Besides retarding the decomposition of PVDF in CSE, the Li2S-modified interfacial layer (SMIL) also improves the wettability between lithium metal and SLCSE which in turn optimizes the lithium deposition process. Our density functional theory calculation results reveal that the migration energy barrier of Li passing through SMIL is much lower than that of Li passing through LiF-modified interfacial layer (FMIL) formed from the decomposition of PVDF. The as-prepared SLCSE shows a Li ionic transference number of 0.44 and Li ion conductivity of 3.42 × 10-4 S/cm at room temperature, and the Li||SLCSE||LiFePO4 cell exhibits an outstanding rate performance with a capacity of 153, 144, 131, and 101 mAh/g at a current density of 0.05, 0.10, 0.25, and 0.50 mA/cm2, respectively.

Bayesian network to predict hepatitis B surface antigen seroclearance in chronic hepatitis B patients.

There is a need for an interpretable, accurate and interactions-considered model for predicting hepatitis B surface antigen (HBsAg) seroclearance. We aimed to construct a Bayesian network (BN) model using available medical records to predict HBsAg seroclearance in chronic hepatitis B (CHB) patients, and to evaluate the model's performance. This was a case-control study. A total of 1966 consecutive CHB patients (mean age 39.04 ± 11.23 years) between January 2006 and June 2015 were included. The demographic and clinical characteristics, laboratory data and imaging parameters were obtained and used to build a BN model to estimate the probability of HBsAg seroclearance. Baseline serum HBsAg and hepatitis Be antigen (HBeAg) levels, virological response and HBeAg seroclearance were the most significant predictors of HBsAg seroclearance. The post-test probability table showed that patients with baseline HBsAg concentrations ≤2000 IU/mL, negative baseline HBeAg, an initial virological response and without HBeAg seroclearance (i.e. no recurrence of HBeAg positivity during follow-up) were most likely to have HBsAg seroclearance. The constructed BN model had an area under the receiver operating characteristic curves of 0.896 (95% confidence interval [CI]: 0.892, 0.899), a sensitivity of 0.840 (95% CI: 0.833, 0.846), a specificity of 0.880 (95% CI: 0.876, 0.884) and an accuracy of 0.878 (95% CI: 0.874, 0.882) for predicting HBsAg seroclearance. The established BN model accurately estimated the probability of HBsAg seroclearance and is a promising tool to assist clinical decision-making.

Using Machine Learning Algorithms to Predict Hepatitis B Surface Antigen Seroclearance.

Hepatitis B surface antigen (HBsAg) seroclearance during treatment is associated with a better prognosis among patients with chronic hepatitis B (CHB). Significant gaps remain in our understanding on how to predict HBsAg seroclearance accurately and efficiently based on obtainable clinical information. This study aimed to identify the optimal model to predict HBsAg seroclearance. We obtained the laboratory and demographic information for 2,235 patients with CHB from the South China Hepatitis Monitoring and Administration (SCHEMA) cohort. HBsAg seroclearance occurred in 106 patients in total. We developed models based on four algorithms, including the extreme gradient boosting (XGBoost), random forest (RF), decision tree (DCT), and logistic regression (LR). The optimal model was identified by the area under the receiver operating characteristic curve (AUC). The AUCs for XGBoost, RF, DCT, and LR models were 0.891, 0.829, 0.619, and 0.680, respectively, with XGBoost showing the best predictive performance. The variable importance plot of the XGBoost model indicated that the level of HBsAg was of high importance followed by age and the level of hepatitis B virus (HBV) DNA. Machine learning algorithms, especially XGBoost, have appropriate performance in predicting HBsAg seroclearance. The results showed the potential of machine learning algorithms for predicting HBsAg seroclearance utilizing obtainable clinical data.

Few-Layer Boron Nitride with Engineered Nitrogen Vacancies for Promoting Conversion of Polysulfide as a Cathode Matrix for Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries have become one of the most promising candidates as next-generation batteries, owing to their high specific capacity, low cost, and environmental benignity. Although many strategies have been proposed to restrain the shuttle of lithium polysulfides (LiPSs) through physical trapping and chemical binding, the sluggish kinetics of PS conversion still degrade the capacity, rate, and cycling performance of Li-S batteries. Herein, a novel kind of few-layer BN with engineered nitrogen vacancies (v-BN) has been developed as a cathode matrix for Li-S batteries. The positive vacancies in the BN nanosheets not only promote the immobilization and conversion of LiPSs, but also accelerate the lithium ion diffusion in cathode electrodes. Compared with pristine BN, the v-BN cathodes exhibit higher initial capacities from 775 mA h g-1 to 1262 mA h g-1 at 0.1 C and a high average coulombic efficiency of over 98 % during 150 cycles. Upon increasing the current density to 1 C, the cell still preserves a capacity of 406 mA h g-1 after 500 cycles, exhibiting a capacity decay of only 0.084 % per cycle. The new vacancy-engineered material provides a promising method for achieving excellent performance in Li-S batteries.

Risk Factors Associated with Dengue Virus Infection in Guangdong Province: A Community-Based Case-Control Study.

Dengue fever (DF) is a mosquito-borne infectious disease that is now an epidemic in China, Guangdong Province, in particular and presents high incidence rates of DF. Effective preventive measures are critical for controlling DF in China given the absence of a licensed vaccination program in the country. This study aimed to explore the individual risk factors for the dengue virus infection in Guangdong Province and to provide a scientific basis for the future prevention and control of DF. A case-control study including 237 cases and 237 controls was performed. Cases were defined for samples who were IgG-antibody positive or IgM-antibody positive, and willing to participate in the questionnaire survey. Additionally, the controls were selected through frequency matching by age, gender and community information from individuals who tested negative for IgG and IgM and volunteered to become part of the samples. Data were collected from epidemiological questionnaires. Univariate analysis was performed for the preliminary screening of 28 variables that were potentially related to dengue virus infection, and multivariate analysis was performed through unconditioned logistic regression analysis to analyze statistically significant variables. Multivariate analysis revealed two independent risk factors: Participation in outdoor sports (odds ratio (OR) = 1.80, 95% confidence interval (CI) 1.17 to 2.78), and poor indoor daylight quality (OR = 2.27, 95% CI 1.03 to 5.03). Two protective factors were identified through multivariate analysis: 2 occupants per room (OR = 0.43, 95% CI 0.28 to 0.65) or ≥3 occupants per room (OR = 0.45, 95% CI 0.23 to 0.89) and air-conditioner use (OR = 0.46, 95% CI 0.22 to 0.97). The results of this study were conducive for investigating the risk factors for dengue virus infection in Guangdong Province. Effective and efficient strategies for improving environmental protection and anti-mosquito measures must be provided. In addition, additional systematic studies are needed to explore other potential risk factors for DF.

High-Charge Density Polymerized Ionic Networks Boosting High Ionic Conductivity as Quasi-Solid Electrolytes for High-Voltage Batteries.

Solid-state electrolytes are actively sought for their potential application in energy storage devices, especially lithium metal rechargeable batteries. However, one of the key challenges in the development of solid-state electrolytes is their lower ionic conductivity compared with that of liquid electrolytes (10-2 S cm-1 at room temperature), where a large gap still exists. Therefore, the pursuit of high ionic conductivity equal to that of liquid electrolytes remains the main objective for the design of solid-state electrolytes. Here, we show a series of high-charge density polymerized ionic networks as solid-state electrolytes that take inspiration from poly(ionic liquid)s. The obtained quasi-solid electrolyte slice displays an astonishingly high ionic conductivity of 5.89 × 10-3 S cm-1 at 25 °C (the highest conductivity among those of the state-of-art polymer gel electrolytes and polymer solid electrolytes) and ultrahigh decomposition potential, >5.2 V versus Li/Li+, which are attributed to the continuous ion transport channel formed by an ultrahigh ion density and an enhanced chemical stability endowed by highly cross-linked networks. The Li/LiFePO4 and Li/LiCoO2 batteries (3.0-4.4 V) assembled with the solid electrolytes show high stable capacities of around 155 and 130 mAh g-1, respectively. In principle, our work breaks new ground for the design and fabrication of the solid-state electrolytes in various energy conversion devices.

Enhanced Cycling Performance for Lithium-Sulfur Batteries by a Laminated 2D g-C3 N4 /Graphene Cathode Interlayer.

Decay in electrochemical performance resulting from the "shuttle effect" of dissolved lithium polysulfides is one of the biggest obstacles for the realization of practical applications of lithium-sulfur (Li-S) batteries. To meet this challenge, a 2D g-C3 N4 /graphene sheet composite (g-C3 N4 /GS) was fabricated as an interlayer for a sulfur/carbon (S/KB) cathode. It forms a laminated structure of channels to trap polysulfides by physical and chemical interactions. The thin g-C3 N4 /GS interlayer significantly suppresses diffusion of the dissolved polysulfide species (Li2 Sx ; 2

Improved Visible-Light-Induced Photocatalytic Performance of ZnAl Layered Double Hydroxide by Incorporation of Ni2.

NiZnAl layered double hydroxides (LDH) with Ni/Zn/Al ratios ranging from 0.1/2/1 to 1/2/1 were papered by coprecipitation. The prepared samples were characterized by multiple techniques including X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) surface area, scanning electronic microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and UV-vis diffuse-reflectance spectroscopy (UV-vis DRS). The incorporation of Ni2+ into the brucite sheets preserves the layered structure of ZnAl LDH. The doped Ni2+ serves as the photogenerated charges separator and improves the visible light photocatalytic activity of ZnAl LDH at a reasonable content. A degradation mechanism based on the hydroxyl radical as the active species was proposed.

Activation of 5-HT(2C) receptor promotes the expression of neprilysin in U251 human glioma cells.

Abeta accumulation, a hallmark of Alzheimer's disease, promotes the disease progress in multiple facets. Abeta is formed through amyloidogenic cleavage pathway of amyloid precursor protein (APP). Production of Abeta can be decreased via activation of 5-HT2C receptor, which enhances alternative APP non-amyloidogenic cleavage. Besides, as one of the best characterized Aß degrading enzymes, neprilysin (NEP) in AD progress has drawn more and more attention. We investigated whether there exists any connection between 5-HT2C receptor and NEP expression. The mRNA and protein expressions of NEP were increased after treatment of 5-HT2C receptor agonist RO-60-0175 in concentration- and time-dependent manners, and NEP expression was decreased after treatment of 5-HT2C receptor antagonist SB242084 correspondingly. These results suggest that 5-HT2C receptor may inhibit the Abeta formation by promoting NEP expression. The underlying mechanism will be explored in follow-up study and may provide potential target for AD therapy.