Investigating catalytic pathways: a comparative review of homogeneous and heterogeneous catalysis for 3-aroylimidazo[1,2-a]pyridine synthesis.

3-aroylimidazo[1,2-a]pyridines represent a class of derivatives in the imidazo[1,2-a]pyridine family known for their important biological and pharmaceutical activities. Consequently, various methodologies have been designed to simplify the synthesis of this structure, with an emphasis on the use of cost-effective starting materials and environmentally friendly protocols. All the methods developed in recent years (from 2016 to 2023) rely on homogeneous or heterogeneous catalysts. Therefore, we aim to perform a comparative analysis between these two approaches, elucidating their respective advantages and limitations. The first part of this work focuses on techniques employing homogeneous catalysts, followed by the next section devoted to heterogeneous catalysts. This comprehensive review should be of substantial interest to researchers in the fields of organic and medicinal chemistry, as it provides a valuable resource for their research.

A comprehensive assessment of carbon steel corrosion inhibition by 1,10-phenanthroline in the acidic environment: insights from experimental and computational studies.

1,10-Phenanthroline (PHN) is a nitrogen-containing heterocyclic organic compound that is widely used in a variety of applications, including chemosensors, biological studies, and pharmaceuticals, which promotes its use as an organic inhibitor to reduce corrosion of steel in acidic solution. In this regard, the inhibition ability of PHN was examined for carbon steel (C48) in a 1.0 M HCl environment by performing electrochemical impedance spectroscopy (EIS), potentiodynamic polarization (PDP), mass loss, and thermometric/kinetic. Additionally, scanning electron microscopy (SEM) was used to examine the surface morphology of C48 immersed in 1.0 M HCl protected with our inhibitor. According to the PDP tests, increasing the PHN concentration resulted in an improvement in corrosion inhibition efficiency. Besides, the maximum corrosion inhibition efficiency is about 90% at 328 K. Furthermore, the PDP assessments demonstrated that PHN functions as a mixed-type inhibitor. The adsorption analysis reveals that our title molecule mechanism is due to physical-chemical adsorption, as predicted by the Frumkin, Temkin, Freundlich, and Langmuir isotherms. The SEM technique exhibited that the corrosion barrier occurs due to the adsorption of the PHN compound through the metal/1.0 M HCl interface. In addition, the computational investigations based on a quantum calculation using density functional theory (DFT), reactivity (QTAIM, ELF, and LOL), and molecular-scale by Monte Carlo (MC) simulations confirmed the experimental results by providing further insight into the mode of adsorption of PHN on the metal surface, thus forming a protective film against corrosion on the C48 surface.

Mesoporous Silica Modified with 2-Phenylimidazo[1,2-a] pyridine-3-carbaldehyde as an Effective Adsorbent for Cu(II) from Aqueous Solutions: A Combined Experimental and Theoretical Study.

In this study, we will present an efficient and selective adsorbent for the removal of Cu(II) ions from aqueous solutions. The silica-based adsorbent is functionalized by 2-phenylimidazo[1,2-a] pyridine-3-carbaldehyde (SiN-imd-py) and the characterization was carried out by applying various techniques including FT-IR, SEM, TGA and elemental analysis. The SiN-imd-py adsorbent shows a good selectivity and high adsorption capacity towards Cu(II) and reached 100 mg/g at pH = 6 and T = 25 °C. This adsorption capacity is important compared to other similar adsorbents which are currently published. The adsorption mechanism, thermodynamics, reusability and the effect of different experimental conditions, such as contact time, pH and temperature, on the adsorption process, were also investigated. In addition, a theoretical study was carried out to understand the adsorption mechanism and the active sites of the adsorbent, as well as the stability of the complex formed and the nature of the bonds.

Evaluation of inhibitive corrosion potential of symmetrical hydrazine derivatives containing nitrophenyl moiety in 1M HCl for C38 steel: experimental and theoretical studies.

The exploitation of cost-effective, sustainable, green and efficient compounds is a renewed science and a demanding mission for today's chemists and technologists. In this view, the inhibitive corrosion properties of some hydrazine derivatives named (1E,2E)-bis(1-(2-nitrophenyl)ethylidene)hydrazine (SSBO), (1E,2E)-bis(1-(3-nitrophenyl)ethylidene)hydrazine (SSBM) and (1E,2E)-bis(1-(4-nitrophenyl)ethylidene)hydrazine (SSBP) on the C38 steel corrosion in 1M HCl media has been evaluated by different techniques like electrochemical impedance spectroscopy (EIS), potentiodynamic polarization (PDP), scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy. The EIS results showed that SSBM is the greatest inhibitor ( η > 93 %) among the three tested compounds. The SSBM gives considerable inhibition efficiency against corrosion of steel compared to the previous studies. The PDP curves indicated that the studied inhibitors were a mixed-type inhibitor with a predominantly cathodic control. Quantum calculations of some descriptors derived from the density functional theory (DFT), the transition state theory (TST), the quantum theory of atoms in molecules (QTAIM) and molecular dynamics simulation have delivered helpful information regarding electron transfer and mechanism during adsorption of inhibitors on C38 steel surface.

Experimental and theoretical study for removal of trimethoprim from wastewater using organically modified silica with pyrazole-3-carbaldehyde bridged to copper ions.

BACKGROUND: Human and veterinary antibiotics are typically discharged as parent chemicals in urine or feces and are known to be released into the environment via wastewater treatment plants (WWTPs). Several research investigations have recently been conducted on the removal and bioremediation of pharmaceutical and personal care products (PPCPs) disposed of in wastewater. RESULTS: SiNP-Cu, a chelating matrix, was produced by delaying and slowing 1.5-dimethyl-1H-pyrazole-3-carbaldehyde on silica gel from functionalized with 3-aminopropyltrimethoxysilane. The prepared sorbent material was characterized using several techniques including BET surface area, FT-IR spectroscopy, Scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and nitrogen adsorption-desorption isotherm. The pseudo-second-order model provided the best correlation due to the big match between the experimental and theoretical of different adsorption coefficients. The Langmuir and Freundlich adsorption models were used and the study showed a better match with the Freundlich model with a capacity of removal reached up to 420 mg g-1. The removal capacity was dependent on pH and increased by increasing pH. The removal percentage reached 91;5% at pH = 8. The adsorbent demonstrated a high percentage removal of TMP, reaching more than 94% when increased pH. The sample was simply regenerated by soaking it for a few minutes in 1 N HCl and drying it. The sorbent was repeated five times with no discernible decrease in removal capacity. The thermodynamic study also showed endothermic, increasing randomness and not spontaneous. The free energy was 2.71 kJ/mol at 320 K. The findings of the DFT B3LYP/6-31 + g (d, p) local reactivity descriptors revealed that nitrogen atoms and π-electrons of the benzene and pyrimidine rings in the TMP are responsible for the adsorption process with the SiNP surface. The negative values of the adsorption energies obtained by molecular dynamic simulation indicated the spontaneity of the adsorption process. CONCLUSION: The global reactivity indices prove that TMP is stable and it can be removed from wastewater using SiNP surface. The results of the local reactivity indices concluded that the active centers for the adsorption process are the nitrogen atoms and the π-electrons of the pyrimidine and benzene rings. Furthermore, the positive value of the maximum charge transfer number (ΔN) proves that TMP has a great tendency to donate electrons to SiNP surface during the process of adsorption.

A Highly Efficient Environmental-Friendly Adsorbent Based on Schiff Base for Removal of Cu(II) from Aqueous Solutions: A Combined Experimental and Theoretical Study.

Removal of heavy metals from drinking water sources and rivers is of strategic health importance and is essential for sustainable ecosystem development, in particular in polluted areas around the globe. In this work, new hybrid inorganic-organic material adsorbents made of ortho- (Si-o-OR) or para-Schiff base silica (Si-p-OR) were synthesized and characterized in depth. These hybrid adsorbents show a high selectivity to Cu(II), even in the presence of competing heavy metals (Zn(II), Cd(II), and Pb(II)), and also demonstrate great reusability after five adsorption-desorption cycles. Maximum sorption capacity for Cu(II) was found for Si-o-OR (79.36 mg g-1) and Si-p-OR (36.20 mg g-1) in no less than 25 min. Energy dispersive X-ray fluorescence and Fourier transform-infrared spectroscopy studies demonstrate that this uptake occurs due to a chelating effect, which allows these adsorbents to trap Cu(II) ions on their surfaces; this result is supported by a theoretical study for Si-o-OR. The new adsorbents were tested against real water samples extracted from two rivers from the Oriental region of Morocco.

Kinetics, thermodynamics, equilibrium, surface modelling, and atomic absorption analysis of selective Cu(ii) removal from aqueous solutions and rivers water using silica-2-(pyridin-2-ylmethoxy)ethan-1-ol hybrid material.

The removal of heavy metals is attracting considerable attention due to their undesirable effects on the environment. In this investigation, a new adsorbent based on silica functionalized with pyridin-2-ylmethanol (SiPy) was successfully synthesized to yield to a hybrid material. FTIR, SEM, TGA, and specific surface area analysis were used to characterize the structure and morphology of the SiPy hybrid material. Various heavy metal ions such as Cu(ii), Zn(ii), Cd(ii), and Pb(ii) were selected to examine the adsorption efficiency of the newly prepared adsorbent, optimized at varying solution pH, contact time, concentration, and temperature. The adsorbent SiPy displayed good adsorption capacity of 90.25, 75.38, 55.23, and 35.12 mg g-1 for Cu(ii), Zn(ii), Cd(ii), and Pb(ii), respectively, at 25 min and pH = 6. The adsorption behaviors of metal ions onto the SiPy adsorbent fitted well with the pseudo-second-order kinetic mode and the isotherm was better described by the Langmuir isotherm. The thermodynamic studies disclose spontaneous and endothermic adsorption process. Furthermore, the SiPy adsorbent retained good selectivity and regeneration properties after five adsorption-desorption cycles of Cu(ii). A computational investigation of the adsorption mechanism indicates that the N-pyridine, O-hydroxyl, and ether O-atoms play a predominant role during the capture of Cu(ii), Zn(ii), Cd(ii), and Pb(ii). This study proposes the SiPy adsorbent as an attractive material for the selective removal of Cu(ii) from real river water and real industrial wastewater.

Efficient and Environmentally Friendly Adsorbent Based on ß-Ketoenol-Pyrazole-Thiophene for Heavy-Metal Ion Removal from Aquatic Medium: A Combined Experimental and Theoretical Study.

A new sustainable and environmentally friendly adsorbent based on a ß-ketoenol-pyrazole-thiophene receptor grafted onto a silica surface was developed and applied to the removal of heavy-metal ions (Pb(II), Cu(II), Zn(II), and Cd(II)) from aquatic medium. The new material SiNPz-Th was well characterized and confirms the success of covalent binding of the receptor on the silica surface. The effect of environmental parameters on adsorption including pH, contact time, temperature, and the initial concentration were investigated. The maximum adsorption capacities of SiNPz-Th for Pb(II), Cu(II), Zn(II), and Cd(II) ions were 102.20, 76.42, 68.95, and 32.68 mg/g, respectively, at 30 min and pH = 6. The adsorption isotherms, kinetics, and thermodynamic process were investigated and showed efficiency and selectivity toward Pb(II) and good regeneration performance. Density functional theory, noncovalent-interaction, and quantum theory of atoms in molecules calculations were used to study and to gain a deeper understanding of both the adsorption mechanism and selectivity of metal ions onto the adsorbent. Accordingly, metal ions such as Pb(II), Cu(II), and Zn(II) were bidentate coordinated with the adsorbent by nitrogen and oxygen atoms of the Schiff base C=N and hydroxyl group -OH, respectively, to form stable complexes. Whereas Cd(II) was coordinated in a monodentate fashion with oxygen atom of the hydroxyl group. Furthermore, the affinity of SiNPz-Th toward the metal ions was decreased in the order of Pb(II) > Cu(II) > Zn(II) > Cd(II), in good agreement with the experimental results. All these results highlight that SiNPz-Th has good potential to be an advanced adsorbent for the removal of lead ions from real water.

Synthesis, Biochemical Characterization, and Theoretical Studies of Novel ß-Keto-enol Pyridine and Furan Derivatives as Potent Antifungal Agents.

In the present study, we report the design and synthesis of new derivatives of the ß-keto-enol grafted on pyridine and furan moieties (L 1 -L 11 ). Structures of compounds were fully confirmed by Fourier transform infrared spectroscopy (FT-IR), 1H NMR, 13C NMR, electrospray ionization/liquid chromatography-mass spectrometry (ESI/LC-MS), and elemental analysis. The compounds were screened for antifungal and antibacterial activities (Escherichia coli, Bacillus subtilis, and Micrococcus luteus). In vitro evaluation showed significant fungicidal activity for L 1 , L 4 , and L 5 against fungal strains (Fusarium oxysporum f.sp albedinis) compared to the reference standard. Especially, the exceptional activity has been demonstrated for L 1 with IC50 = 12.83 µg/mL. This compound and the reference benomyl molecule also showed a correlation between experimental antifungal activity and theoretical predictions by Petra/Osiris/Molinspiration (POM) calculations and molecular coupling against the Fgb1 protein. The highest inhibition of bacterial growth for L 1 is due to its strongest binding to the target protein. This report may stimulate the further synthesis of examples of this substance class for the development of new drugs.

Highly Selective Removal of Pb(II) by a Pyridylpyrazole-ß-ketoenol Receptor Covalently Bonded onto the Silica Surface.

Efficient materials capable of capturing toxic metals from water are widely needed. Herein, a new pyridylpyrazole-ß-ketoenol receptor, X-ray diffraction analyzed, was covalently incorporated into the silica surface to produce solid and recyclable adsorbent particles. The new material, fully characterized, revealed extremely efficient removal of toxic metals from water, with a selectivity order of Pb(II) > Zn(II) > Cu(II) > Cd(II). The adsorption was exceptionally rapid at optimum pH and concentrations, showing Pb(II) removal of 93 mg g-1 within 5 min and maximum Pb(II) adsorption of 110 mg g-1 after only 20 min. Sorption isotherms agreed well with the Langmuir model suggesting a monolayer adsorption, whereas kinetics agreed with the pseudo-second-order model suggesting a chemisorption binding mechanism. Thermodynamics of adsorption were fitted with an endothermic and spontaneous process. The material, recyclable for at least five cycles, is therefore promising for the cleanup of water polluted by toxic metals, especially lead.

Removal and extraction efficiency of Quaternary ammonium herbicides paraquat (PQ) from aqueous solution by ketoenol-pyrazole receptor functionalized silica hybrid adsorbent (SiNPz).

Pesticides and herbicides have been used extensively in agricultural practices to control pests and increase crop yields. Paraquat (PQT2+, 1,1-dimethyl-4,4-dipyridinium chloride) is one of the herbicide that belois classified as bipyridines and is used over the world. The objective of this study is to use ketoenol-pyrazole receptor functionalized silica hybrid as adsorbent for removal PQT2+ from aqueous solution. The adsorbent was synthesized, and characterized using scanning electron microscopy (SEM), nuclear magnetic resonance (NMR), Thermal analysis and other techniques. Different experimental parameters such as the effect of the amount of adsorbent, solution pH and temperatures and contact times were studied. Pseudo-order kinetics models were studied, and our data followed a pseudo second order. Experimental data were analyzed for both Langmuir and Freundlich models and the data fitted well with the Langmuir isotherm model. To understand the mechanism of adsorption, thermodynamic parameters like standard enthalpy, standard Gibbs free energy, and standard entropy were studied. The study indicated that the process is spontaneous, exothermic in nature and follow physisorption mechanisms. The novelty of this study showed surface of pyrazol-enol-imine-substituted silica (SiNPz) has the ability to highlight the surface designed for efficient removal of PQT2+, from aqueous solutions more than other studies. The study also showed that ketoenol-pyrazole receptor can be regenerated in five cycles using HNO3 without affecting its adsorption capacity.

Novel ß-keto-enol Pyrazolic Compounds as Potent Antifungal Agents. Design, Synthesis, Crystal Structure, DFT, Homology Modeling, and Docking Studies.

A new family of promising inhibitors bearing ß-keto-enol functionality with greatly improved pharmacophore properties has been prepared. Herein, a series of novel derivatives of ß-keto-enol group embedded with pyrazolic moiety has been designed and synthesized via a one-step procedure using mixed Claisen condensation in the attempt to develop potential antifungal agents. The structures of the synthesized compounds were confirmed by elemental analysis, FT-IR, ESI/LC-MS, and 1H and 13C NMR. In addition, X-ray diffraction analysis (XRD) was used to determine the single crystal structure of compound 10. All of the new compounds have been evaluated for their in vitro antifungal and antibacterial activities. Interestingly, the results indicate that most of the compounds display notable antifungal activity close to that of the benomyl fungicide taken as the standard drug. For the most active compound and for benomyl, a correlation has been evidenced between the experimental antifungal activity and the theoretical predictions by DFT calculations and molecular docking against Fgb1 protein.

Removal of toxic heavy metals from river water samples using a porous silica surface modified with a new ß-ketoenolic host.

A new hybrid adsorbent material for the efficient removal of heavy metals from natural real water solutions (Moroccan river water samples) was prepared by the immobilization of a new conjugated ß-ketoenol-pyridine-furan ligand onto a silica matrix. The thermodynamical properties including pH, adsorption isotherms, competitive adsorption, selectivity and regeneration were studied to investigate the effect of ketoenol-pyridine-furan-silica (SiNL) on the removal of Zn(II), Pb(II), Cd(II) and Cu(II) from aqueous solutions. An increase in adsorption as a function of pH and fast adsorption was reached within 25 min. The maximum sorption capacities for Zn(II), Pb(II), Cd(II) and Cu(II) were 96.17, 47.07, 48.30 and 32.15 mg·g-1, respectively. Furthermore, the material proved to be very stable - its adsorption capacity remained greater than 98% even after five cycles of adsorption/desorption. Compared to literature results, this material can be considered a high-performing remediation adsorbent for the extraction of Zn(II) from natural real water solution.

Synthesis, crystal structure, DFT studies and biological activity of (Z)-3-(3-bromophenyl)-1-(1,5-dimethyl-1H-pyrazol-3-yl)-3-hydroxyprop-2-en-1-one.

BACKGROUND: Nowadays, is emerging a new generation of highly promising inhibitors bearing the ß-ketoenol functionality. The present work relates to the first synthesis, the structure determination, the DFT studies and the use of a new biomolecule designed with a ß-ketoenol group bounded to a pyrazolic moiety. RESULT: A novel ß-ketoenol-pyrazole has been synthesized, well characterized and its structure was confirmed by single crystal X-ray diffraction. The electron densities and the HOMO-LUMO gap have been calculated using the DFT method with BLYP, PW91, PWC functionals and 6-31G* basis set. An evaluation of the molecule stability is provided by a NBO analysis and the calculated Fukui and Parr functions have been used to locate the reactive electrophile and nucleophile centers in the molecule. The synthesized compound, screened for its in vitro antifungal behavior against the Fusarium oxysporum f.sp. albedinis FAO fungal strains, shows a moderate activity with an inhibition percentage of 46%. The product was also tested against three bacterial strains (Escherichia coli, Bacillus subtilis and Micrococcus luteus), but no significant effect was observed against these organisms. CONCLUSIONS: Density functional calculations are used to evaluate the HOMO-LUMO energy gap, the molecular electrostatic potential and to provide a natural bond orbital analysis. The measured antimicrobial activities encourage us to continue searching for other structures, likely to be good antifungal candidates.

ß-Keto-enol Tethered Pyridine and Thiophene: Synthesis, Crystal Structure Determination and Its Organic Immobilization on Silica for Efficient Solid-Liquid Extraction of Heavy Metals.

Molecules bearing ß-keto-enol functionality are potential candidates for coordination chemistry. Reported herein is the first synthesis and use of a novel designed ligand based on ß-keto-enol group embedded with pyridine and thiophene moieties. The product was prepared in a one-step procedure by mixed Claisen condensation and was characterized by EA, m/z, FT-IR, (¹H, (13)C) NMR and single-crystal X-ray diffraction analysis. The new structure was grafted onto silica particles to afford a chelating matrix which was well-characterized by EA, FT-IR, solid-state (13)C-NMR, BET, BJH, SEM and TGA. The newly prepared organic-inorganic material was used as an adsorbent for efficient solid-phase extraction (SPE) of Cu(II), Zn(II), Cd(II) and Pb(II) from aqueous solutions and showed a capture capacity of 104.12 mg·g(-1), 98.90 mg·g(-1), 72.02 mg·g(-1), and 65.54 mg·g(-1), respectively. The adsorption capacity was investigated, in a batch method, using time of contact, pH, initial concentration, kinetics (Langmuir and Freundlich models), and thermodynamic parameters (ΔG°, ΔH° and ΔS°) of the system effects.

Synthesis of Novel ß-Keto-Enol Derivatives Tethered Pyrazole, Pyridine and Furan as New Potential Antifungal and Anti-Breast Cancer Agents.

Recently, a new generation of highly promising inhibitors bearing ß-keto-enol functionality has emerged. Reported herein is the first synthesis and use of novel designed drugs based on the ß-keto-enol group embedded with heterocyclic moieties such as pyrazole, pyridine, and furan, prepared in a one-step procedure by mixed Claisen condensation. All the newly synthesized compounds were characterized by FT-IR, ¹H-NMR, (13)C-NMR, ESI/LC-MS, elemental analysis, and evaluated for their in vitro antiproliferative activity against breast cancer (MDA-MB241) human cell lines and fungal strains (Fusarium oxysporum f.sp albedinis FAO). Three of the synthesized compounds showed potent activity against fungal strains with IC50 values in the range of 0.055-0.092 µM. The results revealed that these compounds showed better IC50 values while compared with positive controls.

Organically modified silica with pyrazole-3-carbaldehyde as a new sorbent for solid-liquid extraction of heavy metals.

A new chelating matrix, SiNP, has been prepared by immobilizing 1.5-dimethyl-1H-pyrazole-3-carbaldehyde on silica gel modified with 3-aminopropyl-trimethoxysilane. This new chelating material was well characterized by elemental analysis, FT-IR spectroscopy, cross polarization magic angle spinning solid state 13C-NMR, nitrogen adsorption-desorption isotherm, BET surface area, BJH pore size, and scanning electron microscopy (SEM). The new product exhibits good chemical and thermal stability as determined by thermogravimetry curves (TGA). The new prepared material was used as an adsorbent for the solid-phase extraction (SPE) of Pb(II), Cd(II), Cu(II) and Zn(II) from aqueous solutions using a batch method, prior to their determination by flame atomic adsorption spectrometry. The adsorption capacity was investigated using kinetics and pH effects. Common coexisting ions did not interfere with separation and determination.

Polysiloxane surface modified with bipyrazolic tripodal receptor for quantitative lead adsorption.

A new silica gel compound modified N,N-bis(3,5-dimethylpyrazol-1-ylmethyl) amine (SiN(2)Pz) was synthesized and characterized by elemental analysis, FT-IR, (13)C NMR of the solid state, nitrogen adsorption-desorption isotherm, BET surface area and BJH pore sizes. The new surface exhibits good chemical and thermal stability determined by thermogravimetry curves (TGA). The effect of pH and stirring time on the adsorption of Pb(II) were studied. The process of metal retention was followed by batch method and the optimum pH value for the quantitative adsorption of this toxic metal ion was 7. At this pH value, the new functionalized polysiloxane presents further improvements and shows higher affinity (123mg of Pb(2+)/g of silica) for the effective adsorption of Pb(II) compared to others described sorbents. The extracted amounts of Pb(II) were determined by atomic absorption measurements.