Enhancing the dissolution of phenylbutazone using Syloid® based mesoporous silicas for oral equine applications.

Three mesoporous silica excipients (Syloid® silicas AL-1 FP, XDP 3050 and XDP 3150) were formulated with a model drug known for its poor aqueous solubility, namely phenylbutazone, in an attempt to enhance the extent and rate of drug dissolution. Although other forms of mesoporous silica have been investigated in previous studies, the effect of inclusion with these specific Syloid® silica based excipients and more interestingly, with phenylbutazone, is unknown. This work reports a significant enhancement for both the extent and rate of drug release for all three forms of Syloid® silica at a 1:1 drug:silica ratio over a period of 30 min. An explanation for this increase was determined to be conversion to the amorphous form and an enhanced drug loading ability within the pores. Differences between the release profiles of the three silicas were concluded to be a consequence of the physicochemical differences between the three forms. Overall, this study confirms that Syloid® silica based excipients can be used to enhance dissolution, and potentially therefore bioavailability, for compounds with poor aqueous solubility such as phenylbutazone. In addition, it has been confirmed that drug release can be carefully tailored based on the choice of Syloid® silica and desired release profile.

Safe human exposure limits for airborne linear siloxanes during spaceflight.

BACKGROUND: Low molecular weight siloxanes are used in industrial processes and consumer products, and their vapors have been detected in the atmospheres of the Space Shuttle and International Space Station. Therefore, the National Aeronautics and Space Administration (NASA) developed spacecraft maximum allowable concentrations (SMACs) for siloxane vapors to protect astronaut health. Since publication of these original SMACs, new studies and new risk assessment approaches have been published that warrant re-examination of the SMACs. OBJECTIVE: To reevaluate SMACs published for octamethyltrisiloxane (L3) for exposures ranging from 1 hour to 180 days, to develop a 1000-day SMAC, and to expand the applicability of those values to the family of linear siloxanes. METHODS: A literature review was conducted to identify studies conducted since the SMACs for L3 were set in 1994. The updated data were reviewed to determine the sensitive toxicity endpoints, and current risk assessment approaches and methods for dosimetric adjustments were evaluated. RESULTS: Recent data were used to update the original 1-hour, 24-hour, 30-day, and 180-day SMACs for L3, and a 1000-day SMAC was developed to protect crewmembers during future exploration beyond Earth orbit. Group SMACs for the linear siloxane family, including hexamethyldisiloxane (L2), L3, decamethyltetrasiloxane (L4), and dodecamethylpentasiloxane (L5), were set for exposures of 1-hour to 1000 days. CONCLUSION: New SMACs, based on acute pulmonary and neurotoxicity at high doses only achievable with L2 and potential liver effects following longer-term exposures to L2 and L3, were established to protect crewmembers from the adverse effects of exposure to linear siloxanes.

Inclusion of fenofibrate in a series of mesoporous silicas using microwave irradiation.

A selection of porous silicas were combined with a model drug using a recently developed, controlled microwave heating process to determine if the application of microwave irradiation could enhance subsequent drug release. Five mesoporous silica types were investigated (core shell, core shell rehydrox, SBA-15, silica gel, SYLOID®) and, for comparison, one non-porous silica (stober). These were formulated using a tailored microwave heating method at drug/excipient ratios of 1:1, 1:3 and 1:5. In addition, all experiments were performed both in the presence and absence of water, used as a fluidising media to aid interaction between drug and support, and compared with results obtained using more traditional heating methods. All formulations were then characterised using differential scanning calorimetry (DSC), powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and Fourier transformation infrared spectroscopy (FT-IR). Pharmaceutical performance was investigated using in vitro drug release studies. A significant enhancement in the release profile of fenofibrate was observed for formulations prepared using microwave heating in the absence of water for five of the six silica based formulations. Of all the formulations analysed, the greatest extent of drug release within the experimental 30 min was the 1:5 core shell rehydrox achieving a total of 86.6 ± 2.8%. The non-porous (stober) particles did not exhibit an increased release of the drug under any experimental conditions studied. This anomaly is thought to be a result of the comparatively small surface area of the silica particles, thus preventing the adsorption of drug molecules.

Comparison of fenofibrate-mesoporous silica drug-loading processes for enhanced drug delivery.

Loading a poorly water-soluble drug onto a high surface area carrier such as mesoporous silica (SBA-15) can increase the drug's dissolution rate and oral bioavailability. The loading method can influence subsequent drug properties including solid state structure and release rate. The objective of this research was to compare several loading processes in terms of drug distribution throughout the mesoporous silica matrix, drug solid state form and drug release properties. A model poorly water-soluble drug fenofibrate was loaded onto SBA-15 using; (i) physical mixing, (ii) melt, (iii) solvent impregnation, (iv) liquid CO2 and (v) supercritical CO2 methods. Physical mixing resulted in heterogeneous drug-loading, with no evidence of drug in the mesopores and the retention of the drug in its crystalline state. The other loading processes yielded more homogeneous drug-loading; the drug was deposited into the mesopores of the SBA-15 and was non-crystalline. All the processing methods resulted in enhanced drug release compared to the unprocessed drug with the impregnation, liquid and SC-CO2 producing the greatest increase at t=30 min.

Inhalation dosimetry modeling with decamethylcyclopentasiloxane in rats and humans.

Decamethylcyclopentasiloxane (D(5)), a volatile cyclic methyl siloxane (VCMS), is used in industrial and consumer products. Inhalation pharmacokinetics of another VCMS, octamethylcyclotetrasiloxane (D(4)), have been extensively investigated and successfully modeled with a multispecies physiologically based pharmacokinetic (PBPK) model. Here, we develop an inhalation PBPK description for D(5), using the D(4) model structure as a starting point, with the objective of understanding factors that regulate free blood and tissue concentrations of this highly lipophilic vapor after inhalation in rats and humans. Compared with D(4), the more lipophilic D(5) required deep compartments in lung, liver, and plasma to account for slow release from tissues after cessation of exposures. Simulations of the kinetics of a stable D(5) metabolite, HO-D(5), required diffusion-limited uptake in fat, a deep tissue store in lung, and its elimination by fecal excretion and metabolism to linear silanols. The combined D(5)/HO-D(5) model described blood and tissue concentrations of parent D(5) and elimination of total radioactivity in single and repeat exposures in male and female rats at 7 and 160 ppm. In humans, D(5) kinetic data are more sparse and the model structure though much simplified, still required free and bound blood D(5) to simulate exhaled air and blood time courses from 1 h inhalation exposures at 10 ppm in five human volunteers. This multispecies PBPK model for D(5) highlights complications in interpreting kinetic studies where chemical in blood and tissues represents various pools with only a portion free. The ability to simulate free concentrations is essential for dosimetry based risk assessments for these VCMS.

Disposition of decamethylcyclopentasiloxane in Fischer 344 rats following single or repeated inhalation exposure to 14C-decamethylcyclopentasiloxane (14C-D5).

The disposition of decamethylcyclopentasiloxane (D5) in male and female Fischer 344 rats following single or repeated inhalation exposures was evaluated. Animals were administered a single 6-h nose-only exposure to 7 or 160 ppm 14C-D5 or fourteen 6-h nose-only exposures to unlabeled D5 followed on day 15 by a 6-h exposure to 14C-D5. Subgroups of exposed animals were used to evaluate body burden, distribution, elimination, and deposition on the fur. Retention of radioactivity following single and repeated exposures was relatively low (approximately 1-2% of inhaled D5). Radioactivity and parent D5 were widely distributed to tissues of both male and female rats, with the maximum concentration of radioactivity observed in most tissues by 3 h postexposure. Fat was a depot for D5, with elimination occurring much slower than observed for plasma and other tissues. In all groups, the primary route for elimination of radioactivity was through expired air. Analyses for parent D5 indicated that essentially all the radioactivity in the expired volatiles was unchanged D5. Repeated exposure gave rise to higher levels of parent D5 in the lung and fat of both sexes and in female liver relative to the single exposure. In fat, immediately after sacrifice approximately 50% of the radioactivity was attributed to parent. Five polar metabolites of D5 were identified in urine, with no parent D5 detected. Radiochromatograms demonstrated two peaks in feces. One corresponded to the retention time for D5. The second has been putatively identified as hydroxylated D5.

In vitro and in vivo percutaneous absorption of 14C-octamethylcyclotetrasiloxane (14C-D4) and 14C-decamethylcyclopentasiloxane (14C-D5).

Octamethylcyclotetrasiloxane (D4) and decamethylcyclopentasiloxane (D5) are cyclic siloxanes used as chemical intermediates with some applications in consumer products. The in vitro percutaneous absorption of 14C-D4 and 14C-D5 was studied in flow-through diffusion cells. Single doses were applied neat and in antiperspirant formulations to dermatomed human skin for 24h. The majority of applied D4 and D5 ( approximately 90%) volatilized before being absorbed. Only 0.5% of applied D4 was absorbed while the absorption of D5 (0.04%) was one order of magnitude lower. The largest percentage (>90%) of the absorbed D4 and D5 was found in the skin. The fate of D4 and D5 absorbed in the skin was studied in rat in vivo. A single dose of 14C-D4 (10, 4.8 and 2mg/cm2) and 14C-D5 (10mg/cm2) was topically applied inside a dosing chamber attached to the dorsal area. Rats were housed in metabolism cages up to 24h to enable collection of urine, feces, expired/escaped volatiles. The majority of applied D4 or D5 had volatilized from the skin surface. Less than 1.0% of the applied D4 and only 0.2% of applied D5 was absorbed with approximately 60% of absorbed D4 and 30% of absorbed D5 reaching systemic compartments. The amount absorbed into the skin decreased with time showing that residual D4 and D5 diffused back to the skin surface and continued to evaporate. Overall, a low tendency to pass through the skin into systemic compartments was demonstrated for both D4 (< or = 0.5% of applied dose) and D5 (<0.1% of applied dose).

The synthesis and characterisation of ferromagnetic CaMn2O4 nanowires.

The synthesis of marokite CaMn(2)O(4) nanowires using a hydrothermal method is reported. Transmission electron microscopy and electron diffraction measurements show that the nanowires are polycrystalline in nature with diameters between 10 and 20 nm and lengths ranging from approximately 100 to 500 nm. Most interestingly, in contrast with the bulk material, magnetization measurements show that these nanowires exhibit ferromagnetic ordering with a Curie temperature (T(C)) of approximately 40 K.

In vitro and in vivo evaluation of the estrogenic, androgenic, and progestagenic potential of two cyclic siloxanes.

The purpose of these experiments was to determine the potential estrogenic, androgenic, and progestagenic activity of two cyclic siloxanes, octamethylcyclotetrasiloxane (D4) and decamethylcyclopentasiloxane (D5). Receptor-binding experiments and a luciferase reporter gene assay were used to determine if the materials were able to bind and activate either the estrogen receptors (ERs) or progesterone receptors (PRs)-alpha or beta. The rat uterotrophic assay (RUA) for estrogenic activity and the Hershberger assay for androgenic activity were utilized as the in vivo assays. For the ER-binding studies, D4 was shown to bind to ERalpha but not to ERbeta. D5 did not bind to either of the two receptors. D4 activated the reporter gene at 10 microM, while D5 was considered negative in the estrogen reporter gene assay. Neither material was a ligand for the PRs. Both the RUA and Hershberger assays were conducted using whole-body inhalation of the two materials for 16 h/day. D4 resulted in a small but significant increase in both wet and blotted uterine weight as well as increases in both luminal and glandular epithelial cell height in both Sprague Dawley and Fischer 344 rats. D5 was negative in both rat strains, indicating that D5 does not possess estrogenic activity. Neither material possessed any significant antiestrogenic activity. Both materials were negative in the Hershberger assay indicating that neither material possesses any significant androgenic activity. Our studies have shown that D4 exhibits a low affinity for ERalpha in vitro and a weakly estrogenic response in vivo.