Precise mode control of laser-written waveguides for broadband, low-dispersion 3D integrated optics.

Three-dimensional (3D) glass chips are promising waveguide platforms for building hybrid 3D photonic circuits due to their 3D topological capabilities, large transparent windows, and low coupling dispersion. At present, the key challenge in scaling down a benchtop optical system to a glass chip is the lack of precise methods for controlling the mode field and optical coupling of 3D waveguide circuits. Here, we propose an overlap-controlled multi-scan (OCMS) method based on laser-direct lithography that allows customizing the refractive index profile of 3D waveguides with high spatial precision in a variety of glasses. On the basis of this method, we achieve variable mode-field distribution, robust and broadband coupling, and thereby demonstrate dispersionless LP21-mode conversion of supercontinuum pulses with the largest deviation of <0.1 dB in coupling ratios on 210 nm broadband. This approach provides a route to achieve ultra-broadband and low-dispersion coupling in 3D photonic circuits, with overwhelming advantages over conventional planar waveguide-optic platforms for on-chip transmission and manipulation of ultrashort laser pulses and broadband supercontinuum.

High-sensitivity fiber-tip acoustic sensor with ultrathin gold diaphragm.

Miniature acoustic sensors with high sensitivity are highly desired for applications in medical photoacoustic imaging, acoustic communications and industrial nondestructive testing. However, conventional acoustic sensors based on piezoelectric, piezoresistive and capacitive detectors usually require a large element size on a millimeter to centimeter scale to achieve a high sensitivity, greatly limiting their spatial resolution and the application in space-confined sensing scenarios. Herein, by using single-crystal two-dimensional gold flakes (2DGFs) as the sensing diaphragm of an extrinsic Fabry-Perot interferometer on a fiber tip, we demonstrate a miniature optical acoustic sensor with high sensitivity. Benefiting from the ultrathin thickness (∼8 nm) and high reflectivity of the 2DGF, the fiber-tip acoustic sensor gives an acoustic pressure sensitivity of ∼300 mV/Pa in the frequency range from 100 Hz to 20 kHz. The noise-equivalent pressure of the fiber-tip acoustic sensor at the frequency of 13 kHz is as low as 62.8 µPa/Hz1/2, which is one or two orders of magnitude lower than that of reported optical acoustic sensors with the same size.

Large area single crystal gold of single nanometer thickness for nanophotonics.

Two-dimensional single crystal metals, in which the behavior of highly confined optical modes is intertwined with quantum phenomena, are highly sought after for next-generation technologies. Here, we report large area (>104 µm2), single crystal two-dimensional gold flakes (2DGFs) with thicknesses down to a single nanometer level, employing an atomic-level precision chemical etching approach. The decrease of the thickness down to such scales leads to the quantization of the electronic states, endowing 2DGFs with quantum-confinement-augmented optical nonlinearity, particularly leading to more than two orders of magnitude enhancement in harmonic generation compared with their thick polycrystalline counterparts. The nanometer-scale thickness and single crystal quality makes 2DGFs a promising platform for realizing plasmonic nanostructures with nanoscale optical confinement. This is demonstrated by patterning 2DGFs into nanoribbon arrays, exhibiting strongly confined near infrared plasmonic resonances with high quality factors. The developed 2DGFs provide an emerging platform for nanophotonic research and open up opportunities for applications in ultrathin plasmonic, optoelectronic and quantum devices.

High performance artificial visual perception and recognition with a plasmon-enhanced 2D material neural network.

The development of neuromorphic visual systems has recently gained momentum due to their potential in areas such as autonomous vehicles and robotics. However, current machine visual systems based on silicon technology usually contain photosensor arrays, format conversion, memory and processing modules. As a result, the redundant data shuttling between each unit, resulting in large latency and high-power consumption, seriously limits the performance of neuromorphic vision chips. Here, we demonstrate an artificial neural network (ANN) architecture based on an integrated 2D MoS2/Ag nanograting phototransistor array, which can simultaneously sense, pre-process and recognize optical images without latency. The pre-processing function of the device under photoelectric synergy ensures considerable improvement of efficiency and accuracy of subsequent image recognition. The comprehensive performance of the proof-of-concept device demonstrates great potential for machine vision applications in terms of large dynamic range (180 dB), high speed (500 ns) and low energy consumption per spike (2.4 × 10-17 J).

Clinical Analysis of Atorvastatin Calcium, Fenofibrate, and Acipimox in the Treatment of Hypertriglyceridemia-induced Acute Pancreatitis.

Background: Hypertriglyceridemia-induced acute pancreatitis (HTG-AP) is an increasingly recognized and potentially severe form of acute pancreatitis. The effective management of HTG-AP is critical due to its association with significant morbidity and mortality. HTG-AP poses a considerable burden on affected individuals and healthcare systems. It can result in persistent upper abdominal pain, nausea, vomiting, abdominal distension, fever, and in severe cases, hypotension or shock and multiple organ dysfunction. Standard treatment strategies often involve lipid-lowering agents, but the optimal therapeutic approach remains a subject of ongoing research. This study aims to evaluate the efficacy of atorvastatin calcium, fenofibrate, and acipimox, either individually or in combination, in the treatment of HTG-AP, providing insights into more effective management strategies. Methods: 150 HTG-AP patients admitted to the first hospital of Putian from June 2020 to December 2022 were selected. The age range of the patients included in the study was between 30 and 70 years, with an average age of approximately 48 years. The cohort consisted of 90 males and 60 females, resulting in a male-to-female ratio of 3:2. The patients were grouped: atorvastatin calcium, acipimox, fenofibrate, fenofibrate + Atorvastatin calcium, fenofibrate + acipimox, and no drug. The therapeutic effects and clinical indicators of the six groups were compared. Results: Patients in the fenofibrate + acipimox and fenofibrate groups experienced significantly reduced hospitalization duration compared to the other groups. They also had shorter abdominal pain relief time and gastrointestinal function relief time. Additionally, these groups had lower peak levels of amylase (an enzyme) and cholesterol compared to the other groups. In terms of neutrophil (NEUT) increase, the fenofibrate + acipimox, atorvastatin calcium, and fenofibrate groups had significantly lower peak levels compared to the other groups, indicating a less pronounced increase in NEUT. Furthermore, the fenofibrate and acipimox groups exhibited significantly lower peak levels of C-reactive protein (CRP) compared to the other groups. CRP is an indicator of inflammation. On the other hand, the atorvastatin calcium group had higher levels of procalcitonin (a marker of infection) and a higher peak score on the acute physiology and chronic health evaluation II (APACHE II) scale, which assesses the severity of acute pancreatitis, compared to the other groups (all P < .05). Conclusion: The findings of this study highlight the effectiveness of combining fenofibrate and acipimox in the treatment of HTG-AP, leading to rapid disease recovery and significant improvement in clinical symptoms. These results have important implications for clinical practice, as the combination therapy can be widely adopted as an effective treatment strategy for HTG-AP patients. Moreover, this study provides valuable insights into the management of HTG-AP and suggests that lipid-lowering agents, such as atorvastatin calcium and fenofibrate, play a crucial role in the treatment of this condition. However, further research is needed to explore the optimal dosages, treatment durations, and potential side effects of these medications in HTG-AP patients.

Stretch tuning of dispersion in optical microfibers.

Dispersion management is vital for nonlinear optics and ultrafast lasers. We demonstrate that group velocity dispersion (GVD, or second-order dispersion, i.e., ß2) and group delay dispersion (GDD) in optical microfibers can be tuned simply by stretch due to their remarkable features of small diameter and diameter-dependent dispersion. We experimentally demonstrate that a pulling force of just a few mN would elongate the optical microfibers by up to 5%, bringing a significant change in the ß2 and GDD. This change can be increment or decrement, lying on the diameter of optical microfibers. Therefore, 10-cm-long optical microfibers would provide a GDD change of 104 fs2 when elongated by 5%, well in the elastic limit. Remarkably, this change is equivalent to the GDD (not GDD change) provided by a 0.5-m-long single-mode fiber. Experimental results and simulations show that the GDD change is due to the interplay between elongation, diameter shrink, and refractive index decrease. Benefited from the easy manipulation, tiny pulling force required, and full integration with conventional optical fibers, stretch tuning of dispersion in optical microfibers would find applications in dispersion management for ultrafast lasers and nonlinear optics.

Ultrabroadband High Photoresponsivity at Room Temperature Based on Quasi-1D Pseudogap System (TaSe4 )2 I.

Narrow bandgap materials have garnered significant attention within the field of broadband photodetection. However, the performance is impeded by diminished absorption near the bandgap, resulting in a rapid decline in photoresponsivity within the mid-wave infrared (MWIR) and long-wave infrared (LWIR) regions. Furthermore, they mostly worked in cryogenic temperature. Here, without the assistance of any complex structure and special environment, it is realized high responsivity covering ultra-broadband wavelength range (Ultraviolet (UV) to LWIR) in a single quasi-1D pseudogap (PG) system (TaSe4 )2 I nanoribbon, especially high responsivity (From 23.9 to 8.31 A W-1 ) within MWIR and LWIR region at room temperature (RT). Through direct probing the carrier relaxation process with broadband time-resolved transient absorption spectrum measurement, the underlying mechanism of majorly photoconductive effect is revealed, which causes an increased spectral weight extended to PG region. This work paves the way for realizing high-performance uncooled MWIR and LWIR detection by using quasi-1D PG materials.

An optical nanofibre-enabled on-chip single-nanoparticle sensor.

Single-nanoparticle detection has received tremendous interest due to its significance in fundamental physics and biological applications. Here, we demonstrate an optical nanofibre-enabled microfluidic sensor for the detection and sizing of nanoparticles. Benefitting from the strong evanescent field outside the nanofibre, a nanoparticle close to the nanofibre can scatter a portion of the field energy to the environment, resulting in a decrease in the transmitted intensity of the nanofibre. On the other hand, the narrow and shallow microfluidic channel provides a femtoliter-scale detection region, making nanoparticles flow through the detection region one by one. By real-time monitoring of the transmitted intensity of the nanofibre, the detection of a single polystyrene (PS) nanoparticle as small as 100 nm in diameter and exosomes in solution is realised. Based on a statistical analysis, the mean scattering signal is related to the size of the nanoparticle. Experimentally, a mixture of nanoparticles of different diameters (200, 500, and 1000 nm) in solution is identified. To demonstrate its potential in biological applications, high-throughput counting of yeasts using a pair of microchannels and dual-wavelength detection of fluorescently labelled nanoparticles are realised. We believe that the developed nanoparticle sensor holds great potential for the multiplexed and rapid sensing of diverse viruses.

Twisted Optical Micro/Nanofibers Enabled Detection of Subtle Temperature Variation.

The detection of subtle temperature variation plays an important role in many applications, including proximity sensing in robotics, temperature measurements in microfluidics, and tumor monitoring in healthcare. Herein, a flexible miniaturized optical temperature sensor is fabricated by embedding twisted micro/nanofibers in a thin layer of polydimethylsiloxane. Enabled by the dramatic change of the coupling ratio under subtle temperature variation, the sensor exhibits an ultrahigh sensitivity (-30 nm/°C) and high resolution (0.0012 °C). As a proof-of-concept demonstration, a robotic arm equipped with our sensor can avoid undesired collisions by detecting the subtle temperature variation caused by the existence of a human. Moreover, benefiting from the miniaturized and engineerable sensing structure, real-time measurement of subtle temperature variation in microfluidic chips is realized. These initial results pave the way toward a category of optical sensing devices ranging from robotic skin to human-machine interfaces and implantable healthcare sensors.

Atomically Smooth Gold Microflake-Enabled Fiber-Tip Fabry-Perot Interferometer for Temperature and Pressure Sensing.

Fiber-tip sensors based on the Fabry-Perot interferometer (FPI) are one of the most widely used devices for temperature and pressure measurements in space-confined scenarios. However, the deposited metal films with a polycrystalline structure tend to form microcracks under strain, which can undermine the optical quality factor and thus sensing performance of these fiber-tip sensors. Here, we demonstrate an atomically smooth gold microflake (GMF)-enabled fiber-tip FPI sensor with a Q factor as high as 628. Benefiting from the high reflectivity and flexibility of GMFs and the elasticity of the PDMS spacer, the fiber-tip FPI can maintain stable sensing performance under large deformation. For temperature sensing, the fiber-tip sensor exhibits a linear response to the temperature in the range 28-40 °C with a sensitivity as high as 1.74 nm °C-1. To realize linear and sensitive pressure sensing, we design and fabricate a PDMS clamped-beam structure on the fiber tip using a soft lithography technique, achieving a sensitivity of 11.48 nm kPa-1. Moreover, simultaneous measurement of the temperature and pressure is also demonstrated using the wavelength demodulation method. The simple and cost-effective fabrication of the clamped beam and the transferable GMFs allow for the facile integration of high-quality FP cavities on fiber tips, opening new opportunities for developing optical sensors with miniaturized sizes.

High-power continuous-wave optical waveguiding in a silica micro/nanofibre.

As miniature fibre-optic platforms, micro/nanofibres (MNFs) taper-drawn from silica fibres have been widely studied for applications from optical sensing, nonlinear optics to optomechanics and atom optics. While continuous-wave (CW) optical waveguiding is frequently adopted, so far almost all MNFs are operated in low-power region (e.g., <0.1 W). Here, we demonstrate high-power low-loss CW optical waveguiding in MNFs around 1550-nm wavelength. We show that a pristine MNF, even with a diameter down to 410 nm, can waveguide an optical power higher than 10 W, which is about 30 times higher than demonstrated previously. Also, we predict an optical damage threshold of 70 W. In high-power CW waveguiding MNFs, we demonstrate high-speed optomechanical driving of microparticles in air, and second harmonic generation efficiency higher than those pumped by short pulses. Our results may pave a way towards high-power MNF optics, for both scientific research and technological applications.

Waveguide-Integrated Light-Emitting Metal-Insulator-Graphene Tunnel Junctions.

Ultrafast interfacing of electrical and optical signals at the nanoscale is highly desired for on-chip applications including optical interconnects and data processing devices. Here, we report electrically driven nanoscale optical sources based on metal-insulator-graphene tunnel junctions (MIG-TJs), featuring waveguided output with broadband spectral characteristics. Electrically driven inelastic tunneling in a MIG-TJ, realized by integrating a silver nanowire with graphene, provides broadband excitation of plasmonic modes in the junction with propagation lengths of several micrometers (∼10 times larger than that for metal-insulator-metal junctions), which therefore propagate toward the junction edge with low loss and couple to the nanowire waveguide with an efficiency of ∼70% (∼1000 times higher than that for metal-insulator-metal junctions). Alternatively, lateral coupling of the MIG-TJ to a semiconductor nanowire provides a platform for efficient outcoupling of electrically driven plasmonic signals to low-loss photonic waveguides, showing potential for applications at various integration levels.

Molecular Plasmonics with Metamaterials.

Molecular plasmonics, the area which deals with the interactions between surface plasmons and molecules, has received enormous interest in fundamental research and found numerous technological applications. Plasmonic metamaterials, which offer rich opportunities to control the light intensity, field polarization, and local density of electromagnetic states on subwavelength scales, provide a versatile platform to enhance and tune light-molecule interactions. A variety of applications, including spontaneous emission enhancement, optical modulation, optical sensing, and photoactuated nanochemistry, have been reported by exploiting molecular interactions with plasmonic metamaterials. In this paper, we provide a comprehensive overview of the developments of molecular plasmonics with metamaterials. After a brief introduction to the optical properties of plasmonic metamaterials and relevant fabrication approaches, we discuss light-molecule interactions in plasmonic metamaterials in both weak and strong coupling regimes. We then highlight the exploitation of molecules in metamaterials for applications ranging from emission control and optical modulation to optical sensing. The role of hot carriers generated in metamaterials for nanochemistry is also discussed. Perspectives on the future development of molecular plasmonics with metamaterials conclude the review. The use of molecules in combination with designer metamaterials provides a rich playground both to actively control metamaterials using molecular interactions and, in turn, to use metamaterials to control molecular processes.

Photonic Nanolaser with Extreme Optical Field Confinement.

We proposed a photonic approach to a lasing mode supported by low-loss oscillation of polarized bound electrons in an active nano-slit-waveguide cavity, which circumvents the confinement-loss trade-off of nanoplasmonics, and offers an optical confinement down to sub-1-nm level with a peak-to-background ratio of ∼30 dB. Experimentally, the extremely confined lasing field is realized as the dominant peak of a TE_{0}-like lasing mode around 720-nm wavelength, in 1-nm-level width slit-waveguide cavities in coupled CdSe nanowire pairs. The measured lasing characteristics agree well with the theoretical calculations. Our results may pave a way towards new regions for nanolasers and light-matter interaction.

Strong mode coupling-enabled hybrid photon-plasmon laser with a microfiber-coupled nanorod.

Laser based on single plasmonic nanoparticle can provide optical frequency radiation far beyond the diffraction limit and is one of the ultimate goals of nanolasers, yet it remains a challenge to be realized because of the inherently high Ohmic loss. Here, we report the direct observation of lasing in microfiber-coupled single plasmonic nanoparticles enabled by strong mode coupling. We show that, by strongly coupling a gold nanorod (GNR) with the whispering gallery cavity of a dye-doped polymer microfiber (with diameter down to 2.0 µm), the substantially enhanced optical coherence of the hybrid photon-plasmon mode and effective gain accumulated from the active microfiber cavity enable single-mode laser emission from the GNR at room temperature with a threshold as low as 2.71 MW/cm2 and a linewidth narrower than 2 nm.

Optical Microfibers for Sensing Proximity and Contact in Human-Machine Interfaces.

The monitoring of proximity-contact events is essential for human-machine interactions, intelligent robots, and healthcare monitoring. We report a dual-modal sensor made with two functionalized optical microfibers (MFs), which is inspired by the somatosensory system of human skin. The integrated sensor with a hierarchical structure gradationally detects finger approaching and touching by measuring the relative humidity (RH) and force-triggered light intensity variations. Specifically, the RH sensory part shows enhanced evanescent absorption, achieving a sensitive RH measurement with a fast response (110 ms), a high resolution (0.11%RH), and a wide working range (10-100%RH). Enabled by the transition from guided modes into radiation modes of the waveguiding MF, the force sensory part exhibits a high sensitivity (6.2%/kPa) and a fast response (up to 1.5 kHz). By using a real-time data processing unit, the proximity-contact sensor (PCS) achieves continuous detection of the full-contact events, including finger approaching, contacting, pressing, releasing, and leaving. As a proof of concept, the electromagnetic-interference-free PCS enables a smart switch system to recognize the proximity and contact of bare/gloved fingers. Moreover, skin humidity detection and respiration monitoring are realized. These initial results pave the way toward a category of optical collaborative devices ranging from human-machine interfaces to multifunctional on-skin healthcare sensors.

Twin-nanofiber structure for a highly efficient single-photon collection.

Optical nanofiber-based single-photon source has attracted considerable interest due to its property of seamless integration with a single-mode fiber. With nanostructure engraved in the nanofiber, the single-photon collection efficiency can be greatly boosted with enhanced interaction between the single quantum emitter and the guided light. However, the prerequisite nanofabrication processes introduce complexities and extra loss. Here, we demonstrate that by simply placing a quantum emitter in the gap of two parallel nanofibers, single-photon coupling efficiency may reach 54.2%. Our numerical simulation results indicate that photon coupling efficiency of such simple structure is insensitive to the discrepancy in nanofiber radii, which further reduces the difficulties in device fabrication.

Polarization-independent photon up-conversion with a single lithium niobate waveguide.

We propose a polarization-independent up-conversion protocol for single-photon detection at telecom band with a single thin-film periodically poled lithium niobate waveguide. By choosing the proper waveguide parameters, the waveguide dispersion can compensate the crystal birefringence so that quasi-phase-matching conditions for transverse electric and transverse magnetic modes can be simultaneously fulfilled with single poling period. With this scheme, randomly-polarized single photons at 1550 nm can be up-converted with a normalized conversion efficiency of 163.8%/W cm2.

Atomically Smooth Single-Crystalline Platform for Low-Loss Plasmonic Nanocavities.

Nanoparticle-on-mirror plasmonic nanocavities, capable of extreme optical confinement and enhancement, have triggered state-of-the-art progress in nanophotonics and development of applications in enhanced spectroscopies. However, the optical quality factor and thus performance of these nanoconstructs are undermined by the granular polycrystalline metal films (especially when they are optically thin) used as a mirror. Here, we report an atomically smooth single-crystalline platform for low-loss nanocavities using chemically synthesized gold microflakes as a mirror. Nanocavities constructed using gold nanorods on such microflakes exhibit a rich structure of plasmonic modes, which are highly sensitive to the thickness of optically thin (down to ∼15 nm) microflakes. The microflakes endow nanocavities with significantly improved quality factor (∼2 times) and scattering intensity (∼3 times) compared with their counterparts based on deposited films. The developed low-loss nanocavities further allow for the integration with a mature platform of fiber optics, opening opportunities for realizing nanocavity-based miniaturized photonic devices for practical applications.

Optical fibre taper-enabled waveguide photoactuators.

Photoactuators have attracted significant interest for soft robot and gripper applications, yet most of them rely on free-space illumination, which requires a line-of-site low-loss optical path. While waveguide photoactuators can overcome this limitation, their actuating performances are fundamentally restricted by the nature of standard optical fibres. Herein, we demonstrated miniature photoactuators by embedding optical fibre taper in a polydimethylsiloxane/Au nanorod-graphene oxide photothermal film. The special geometric features of the taper endow the designed photoactuator with microscale active layer thickness, high energy density and optical coupling efficiency. Hence, our photoactuator show large bending angles (>270°), fast response (1.8 s for 180° bending), and low energy consumption (<0.55 mW/°), significantly exceeding the performance of state-of-the-art waveguide photoactuators. As a proof-of-concept study, one-arm and two-arm photoactuator-based soft grippers are demonstrated for capturing/moving small objects, which is challenging for free-space light-driven photoactuators.