Experimental Investigation of the Biofunctional Properties of Nickel-Titanium Alloys Depending on the Type of Production.

Nickel-titanium alloys used in dentistry have a variety of mechanical, chemical, and biofunctional properties that are dependent on the manufacturing process. The aim of this study was to compare the mechanical and biofunctional performances of a nickel-titanium alloy produced by the continuous casting method (NiTi-2) with commercial nitinol (NiTi-1) manufactured by the classical process, i.e., from remelting in a vacuum furnace with electro-resistive heating and final casting into ingots. The chemical composition of the tested samples was analyzed using an energy dispersive X-ray analysis (EDX) and X-ray fluorescence (XRF). Electron backscatter diffraction (EBSD) quantitative microstructural analysis was performed to determine phase distribution in the samples. As part of the mechanical properties, the hardness on the surface of samples was measured with the static Vickers method. The release of metal ions (Ni, Ti) in artificial saliva (pH 6.5) and lactic acid (pH 2.3) was measured using a static immersion test. Finally, the resulting corrosion layer was revealed by means of a scanning electron microscope (SEM), which allows the detection and direct measurement of the formatted oxide layer thickness. To assess the biocompatibility of the tested nickel-titanium alloy samples, an MTT test of fibroblast cellular proliferation on direct contact with the samples was performed. The obtained data were analyzed with the IBM SPSS Statistics v22 software. EDX and XRF analyses showed a higher presence of Ni in the NiTi-2 sample. The EBSD analysis detected an additional NiTi2-cubic phase in the NiTi-2 microstructure. Additionally, in the NiTi-2 higher hardness was measured. An immersion test performed in artificial saliva after 7 days did not induce significant ion release in either group of samples (NiTi-1 and NiTi-2). The acidic environment significantly increased the release of toxic ions in both types of samples. However, Ni ion release was two times lower, and Ti ion release was three times lower from NiTi-2 than from NiTi-1. Comparison of the cells' mitochondrial activity between the NiTi-1 and NiTi-2 groups did not show a statistically significant difference. In conclusion, we obtained an alloy of small diameter with an appropriate microstructure and better response compared to classic NiTi material. Thus, it appears from the present study that the continuous cast technology offers new possibilities for the production of NiTi material for usage in dentistry.

Chronic wound dressings - Pathogenic bacteria anti-biofilm treatment with bacterial cellulose-chitosan polymer or bacterial cellulose-chitosan dots composite hydrogels.

Since the pathogenic bacteria biofilms are involved in 70% of chronic infections and their resistance to antibiotics is increased, the research in this field requires new healing agents. New composite hydrogels were designed as potential chronic wound dressings composed of bacterial cellulose (BC) with chitosan polymer (Chi) - BC-Chi and chitosan nanoparticles (nChiD) - BC-nChiD. nChiD were obtained by gamma irradiation at doses: 20, 40 and 60 kGy. Physical and chemical analyses showed incorporation of Chi and encapsulation of nChiD into BC. The BC-Chi has the highest average surface roughness. BC-nChiD hydrogels show an irradiated dose-dependent increase of average surface roughness. New composite hydrogels are biocompatible with excellent anti-biofilm potential with up to 90% reduction of viable biofilm and up to 65% reduction of biofilm height. The BC-nChiD showed better dressing characteristics: higher porosity, higher wound fluid absorption and faster migration of cells (in vitro healing). All obtained results confirmed both composite hydrogels as promising chronic wound healing agents.

Biocompatibility Study of a New Dental Cement Based on Hydroxyapatite and Calcium Silicates: Focus on Liver, Kidney, and Spleen Tissue Effects.

The effects of a new material based on hydroxyapatite and calcium silicates, named ALBO-MPCA, were investigated on the liver, kidney and spleen. The material was administrated orally for 120 days in an in vivo model in Wistar rats, and untreated animals served as a control. Hematological and biochemical blood parameters were analyzed. Qualitative histological analysis of tissues, change in mitotic activity of cells, and histological characteristics was conducted, as well as quantitative stereological analysis of parenchymal cells, blood sinusoids, and connective tissues. Additionally, the protein expressions of Ki67 and CD68 markers were evaluated. Histological analysis revealed no pathological changes after the tested period. It showed the preservation of the architecture of blood sinusoids and epithelial cells and the presence of mitosis. Additionally, the significantly increased number of the Ki67 in the presence of ALBO-MPCA confirmed the proliferative effect of the material noticed by stereological analysis, while immunoreactive CD68 positive cells did not differ between groups. The study showed non-toxicity of the tested material based on the effects on the hematological, biochemical, and observed histological parameters; in addition, it showed evidence of its biocompatibility. These results could be the basis for further steps toward the application of tested materials in endodontics.

Photoactive and antioxidant nanochitosan dots/biocellulose hydrogels for wound healing treatment.

Bacterial infection and their resistance to known antibiotics delays wound healing. In this study, nanochitosan dots (nChiD) produced by gamma irradiation have been encapsulated in bacterial cellulose (BC) polymer matrix to study the antibacterial potentials of these nanocomposites and their possible usage in wound healing treatment (scratch assay). Detailed analyses show that nChiDs have disc-like shape and average diameter in the range of 40 to 60 nm depending of the applied dose. All nChiDs as well as BC-nChiD nanocomposites emit green photoluminescence independently on the excitation wavelengths. The new designed nanocomposites do not have a cytotoxic effect; antioxidant analysis shows their moderate radical scavenging activity whereas antibacterial properties show significant growth inhibition of strains mostly found in difficult-to-heal wounds. The obtained results confirm that new designed BC-nChiD nanocomposites might be potential agent in wound healing treatment.

Bactericidal and antioxidant bacterial cellulose hydrogels doped with chitosan as potential urinary tract infection biomedical agent.

Therapy of bacterial urinary tract infections (UTIs) and catheter associated urinary tract infections (CAUTIs) is still a great challenge because of the resistance of bacteria to nowadays used antibiotics and encrustation of catheters. Bacterial cellulose (BC) as a biocompatible material with a high porosity allows incorporation of different materials in its three dimensional network structure. In this work a low molecular weight chitosan (Chi) polymer is incorporated in BC with different concentrations. Different characterization techniques are used to investigate structural and optical properties of these composites. Radical scavenging activity test shows moderate antioxidant activity of these biocompatible composites whereas in vitro release test shows that 13.3% of chitosan is released after 72 h. Antibacterial testing of BC-Chi composites conducted on Gram-positive and Gram-negative bacteria causing UTIs and CAUTIs (Escherichia coli, Pseudomonas aeruginosa, Klebsiella pneumoniae) and encrustation (Proteus mirabilis) show bactericidal effect. The morphology analysis of bacteria after the application of BC-Chi shows that they are flattened with a rough surface, with a tendency to agglomerate and with decreased length and width. All obtained results show that BC-Chi composites might be considered as potential biomedical agents in treatment of UTIs and CAUTIs and as a urinary catheter coating in encrustation prevention.

Toxicological Profile of Nanostructured Bone Substitute Based on Hydroxyapatite and Poly(lactide-co-glycolide) after Subchronic Oral Exposure of Rats.

Novel three-dimensional (3D) nanohydroxyapatite-PLGA scaffolds with high porosity was developed to better mimic mineral component and microstructure of natural bone. To perform a final assessment of this nanomaterial as a potential bone substitute, its toxicological profile was particularly investigated. Therefore, we performed a comet assay on human monocytes for in vitro genotoxicity investigation, and the systemic subchronic toxicity investigation on rats being per oral feed with exactly administrated extract quantities of the nano calcium hydroxyapatite covered with tiny layers of PLGA (ALBO-OS) for 120 days. Histological and stereological parameters of the liver, kidney, and spleen tissue were analyzed. Comet assay revealed low genotoxic potential, while histological analysis and stereological investigation revealed no significant changes in exposed animals when compared to controls, although the volume density of blood sinusoids and connective tissue, as well as numerical density and number of mitosis were slightly increased. Additionally, despite the significantly increased average number of the Ki67 and slightly increased number of CD68 positive cells in the presence of ALBO-OS, immunoreactive cells proliferation was almost neglected. Blood analyses showed that all of the blood parameters in rats fed with extract nanomaterial are comparable with corresponding parameters of no feed rats, taken as blind probe. This study contributes to the toxicological profiling of ALBO-OS scaffold for potential future application in bone tissue engineering.

Marked epithelial to mesenchymal transition in surgical margins of oral cancer-an in vitro study.

Epithelial to mesenchymal transition (EMT) is a feature of several types of human cancer, including oral squamous cell carcinoma (OSCC). In the present study, tumor and margin cell cultures obtained from patients with OSCC were used to determine the expression patterns of certain EMT-associated markers, including vimentin, α-smooth muscle actin, SLUG and SNAIL. In addition, other EMT-associated features, including clonal, proliferative and migratory potential were compared between the two cell types. Cell cultures were generated from tumor and margin tissue samples from 6 patients and cultured up to the fifth passage. EMT marker expression was assessed by reverse transcription-quantitative PCR. Cell proliferation, colony formation and scratch wound healing assays were conducted to characterize the two cell types in terms of proliferation rates, clonality and motility. All of the studied markers were expressed in tumor and margin cells. Although no significant differences were noted with regard to the aforementioned markers, their expression tended to be higher in margin cultures than in tumor cultures. The expressions of the EMT markers were also higher in the fifth passage compared with those noted at the first with a few exceptions. The rates of proliferation and cell migration were decreased during passages, while the number of colonies was increased in both types of cell culture. Tumor and margin cells indicated certain similarities with regard to EMT transition characteristics.

Developing a novel resorptive hydroxyapatite-based bone substitute for over-critical size defect reconstruction: physicochemical and biological characterization and proof of concept in segmental rabbit's ulna reconstruction.

The aim of this study was to develop novel hydroxyapatite (HAP)-based bioactive bone replacement materials for segmental osteotomy reconstruction. Customized three-dimensional (3D) bone construct was manufactured from nanohydroxyapatite (nHAP) with poly(lactide-co-glycolide) (PLGA) coating using 3D models derived from the computed tomography (CT) scanning of the rabbit's ulna and gradient 3D printing of the bone substitute mimicking the anatomical shape of the natural bone defect. Engineered construct revealed adequate micro-architectural design for successful bone regeneration having a total porosity of 64% and an average pore size of 256 µm. Radiography and micro-CT analysis depicted new bone apposition through the whole length of the reconstructed ulna with a small area of non-resorbed construct in the central area of defect. Histological analysis revealed new bone formation with both endochondral and endesmal type of ossification. Immunohistochemistry analysis depicted the presence of bone formation indicators - bone morphogenetic protein (BMP), osteocalcin (OCN) and osteopontin (OPN) within newly formed bone. Manufactured personalized construct acts as a "smart" responsive biomaterial capable of modulating the functionality and potential for the personalized bone reconstruction on a clinically relevant length scale.

Evaluation of Sealant Penetration in Relation to Fissure Morphology, Enamel Surface Preparation Protocol and Sealing Material.

PURPOSE: The objective was to assess the effect of fissure depth and enamel surface preparation protocols on penetration of resin-based, giomer and glass-ionomer fissure sealants. MATERIALS AND METHODS: Ninety extracted third molars were assigned into three groups according to the material used. All three groups were subsequently divided depending on tooth preparation: no pretreatment or surface preparation with 10% polyacrylic acid, 37% phosphoric acid, or self-etching adhesive. In addition, Er,Cr:YSGG laser or air abrasion were employed in all subgroups. The penetration was evaluated using scanning electron microscopy. RESULTS: The groups that were pretreated with an appropriate acid resulted in superior penetration of glass-ionomer and resin-based sealants when compared with other surface preparation protocols (p < 0.05). The exception was teeth treated with both air abrasion and acid etching. Both preparation protocol and fissure depth significantly affected the sealant penetration (p < 0.05), but fissure depth had a greater impact on fissure penetration than did enamel surface pretreatment. CONCLUSION: All investigated materials exhibit similar properties regarding sealant penetration. Penetration of a fissure sealant is significantly influenced by the fissure depth. In regard to enamel surface preparation protocol, a pretreatment with phosphoric acid in resin-based and polyacrylic acid in glass-ionomers appears to be essential in obtaining the adequate penetration of a sealing material.

NIR photo-driven upconversion in NaYF4:Yb,Er/PLGA particles for in vitro bioimaging of cancer cells.

Lanthanide-doped fluoride up-converting nanoparticles (UCNPs) represent the new class of imaging contrast agents which hold great potential for overcoming existing problems associated with traditionally used dyes, proteins and quantum dots. In this study, a new kind of hybrid NaYF4:Yb,Er/PLGA nanoparticles for efficient biolabeling were prepared through one-pot solvothermal synthesis route. Morphological and structural characteristics of the as-designed particles were obtained using X-ray powder diffraction (XRPD), scanning and transmission electron microscopy (SEM/TEM), energy dispersive spectroscopy (EDS), Fourier transform infrared (FTIR) and photoluminescence (PL) spectroscopy, while their cytotoxicity as well as up-conversion (UC) labeling capability were tested in vitro toward human gingival cells (HGC) and oral squamous cell carcinoma (OSCC). The results revealed coexistence of the cubic (Fm-3m) and hexagonal (P63/m) phase in spherical and irregularly shaped nanoparticles, respectively. PLGA [Poly(lactic-co-glycolic acid)] ligands attached at the surface of UCNPs particles provide their enhanced cellular uptake and enable high-quality cells imaging through a near-infrared (NIR) laser scanning microscopy (λex = 980 nm). Moreover, the fact that NaYF4:Yb,Er/PLGA UCNPs show low cytotoxicity against HGC over the whole concentration range (10-50 µg/mL) while a dose dependent viability of OSCC is obtained indicates that these might be a promising candidates for targeted cancer cell therapy.

Characterization of stem-like cancer cells in basal cell carcinoma and its surgical margins.

BACKGROUND: Understanding the pathogenesis of basal cell carcinoma (BCC) and identifying the cells responsible for propagation and recurrence are crucial for the development of new treatment strategies. The aim of this study was to characterize the cells isolated from BCC and its margin. METHODS: Primary cultures were established from 10 BCCs, their respective close resection margins (3 mm) and 10 control tissues. Stem cell markers analysis was carried out by real-time PCR and/or flow cytometry. Spheroid formation and MTT assays were also performed. RESULTS: Real-time PCR showed a higher expression of embryonic (Oct4, Sox2 and Nanog) and mesenchymal (CD44 and CD73) stem cell markers in tumors compared to margins and controls (P < 0.05). Bmi-1 and GPR49 were also upregulated in tumors in comparison with margins. Both tumor and margin cells, but not normal, had the capacity to form spheroids. During passages, the number of spheres increased, while the diameter decreased. Tumor cells showed higher chemo-resistance compared to margin and control cells. CONCLUSIONS: Basal cell carcinomas expressed stem cell markers, pointing to the existence of a cancer cell side population with stemness characteristics. Margin also appeared to harbour a small number of cancer-initiating cells.

Putative cancer stem cells are present in surgical margins of oral squamous cell carcinoma.

PURPOSE: Recent evidence suggests that small subpopulations of stem-like cells are accountable for tumour initiation, progression and metastasis. Until now, studies were focused exclusively on the characterization of these cell populations within the tumour itself, while tumour margins were neglected, although it is known that the histological and molecular status of tumour margins may play a significant role in the course of the disease. Therefore, the aims of the study were to isolate cells from oral squamous cell carcinomas and their respective margins, to characterize these cells using specific markers, to assess their self-renewal potential and determine their chemoresistance. METHODS: Cell cultures were obtained from 12 tissue specimens (6 tumours and 6 margins). Total RNA was extracted and gene expression analysis was done by real-time PCR (RT-PCR). Flow cytometry, immunocytometry, sphere formation and MTT assays were also applied. RESULTS: With minor differences, cells originating from both tumours and tumour margins showed the presence of stem cell markers CD133, Nanog, Sox2, CD44, and Oct4, had the capacity to form spheroids and showed chemoresistance. CONCLUSIONS: Subpopulations of margin cells appeared to have stemness properties which might raise the question of re-evaluation of optimal surgical management.