Responsive and Degradable Highly Branched Polymers with Hypervalent Iodine(III) Groups at the Branching Points.

A hypervalent (HV) iodine(III)-containing crosslinker, (diacryloyloxyiodo)benzene, is synthesized and its crystal structure is reported. Highly branched polymers with hypervalent iodine(III) groups as the building blocks present at the branching points are synthesized by copolymerization of tert-butyl acrylate and the diacrylate crosslinker (up to 12 mol% vs the monovinyl monomer), under reversible deactivation radical polymerization (iodine transfer polymerization) conditions, which are employed to ensure that the incorporation of the crosslinker into the polymer chains is slow and gradual, that is, to limit the average number of pendant double bonds per chain and delay gelation. The branched polymers with (diacyloxyiodo)benzene-type linkers are responsive and react with monocarboxylic acids, for example, acetic acid, which participate in ligand-exchange reactions with the HV iodine(III) centers, and with reducing agents, for example, tributylphosphine, which reduce iodine(III) to iodine(I); both reactions lead to polymer degradation with the formation of random linear copolymers of tert-butyl acrylate and acrylic acid.

Hypervalent Iodine Compounds with Tetrazole Ligands.

Hypervalent iodine compounds with two I-N bonds, containing 5-substituted tetrazoles as the ligands PhI(N4CR)2 (R = CH3, C6H5, and 4-CH3C6H4), were synthesized from PhI(O2CCF3)2 or PhICl2 and the corresponding tetrazole potassium salts. Alternatively, PhIO was reacted with the free tetrazoles, and the reactions afforded either PhI(N4CR)2 or, in most cases, µ-oxo- or oligomeric compounds with several I and O atoms in the backbone and two terminal tetrazole groups. The isolated compounds were reasonably stable in the solid state as well as in solution at room temperature but explosive at elevated temperatures (135-180 °C depending on the structure). The crystal structure of one representative compound (an oligomer with three I atoms in the backbone and 5-phenyltetrazole end groups) was solved and refined from synchrotron powder X-ray diffraction. The novel compounds were characterized by cyclic voltammetry and were found to be strong oxidants. In addition, they proved to be useful reagents for the iodotetrazolylation of unsaturated compounds such as styrene and cyclohexene and for the transfer of tetrazole groups to N, N-dimethylaniline.

Iodosylbenzene-Pseudohalide-Based Initiators for Radical Polymerization.

Iodosylbenzene reacts with various (pseudo)halides (trimethylsilyl azide or isocyanate or potassium azide, cyanate, and bromide) to yield unstable hypervalent iodine(III) compounds, PhIX2 (X = (pseudo)halide), that undergo rapid homolysis of the hypervalent I-X bonds and generate (pseudo)halide radicals, which can initiate the polymerization of styrene, (meth)acrylates, and vinyl esters. Polymers are formed containing (pseudo)halide functionalities at the α-chain end but, depending on the termination mechanism and the occurrence of transfer of (pseudo)halide groups from the initiator to the propagating radicals, also at the ω-chain end. With slowly polymerizing monomers (styrene and methyl methacrylate) and initiators that were generated rapidly at high concentrations and were especially unstable, the reactions proceeded via a "dead-end" polymerization mechanism, and only low to moderate monomer conversions were attained. When the initiator was generated more slowly and continuously throughout the polymerization (using the combination of iodosylbenzene with the poorly soluble potassium (pseudo)halide salts), typically higher conversions and higher molecular weights were reached. The presence of (pseudo)halide functionalities in the polymers was proved by elemental analysis, IR, and NMR spectroscopy. The azide-containing polymers underwent click-type coupling reactions with dialkynes, while the (iso)cyanate-containing polymers reacted with diamines to afford high-molecular-weight polymers with triazole- and urea-type interchain links, respectively.

Cationic branched polymers for cellular delivery of negatively charged cargo.

Receptor-independent cellular uptake of small molecule therapeutics is limited by their physical interaction with the negatively charged surface of cellular membranes. Passive diffusion through the hydrophobic membrane bilayer follows this process. Unless specific carriers exist in the biological membrane, such interactions limit therapeutics to those that are hydrophobic with modest positive charge at physiological pH. Small negatively charged molecules are therefore not efficient as therapeutics. To enable delivery of such molecules into eukaryotic cells, cationic branched polymers with tetraalkylammonium pendant groups were synthesized by copolymerization of a functional monomer (glycidyl methacrylate) with degradable and non-degradable divinyl crosslinkers in the presence of an efficient chain transfer agent, CBr4, followed by reaction of the multiple pendant epoxide groups and most of the alkyl bromide chain ends with amines. Cationic branched polymers with covalently attached fluorescent labels entered human cancerous and non-cancerous cells. The non-labeled analogues were able to carry anionic cargo (carboxyfluorescein) into the cells, while no uptake was observed in the absence of the cationic carriers. Most of the polymers were not significantly toxic at the concentrations used. This pilot study showed that cellular uptake of anionic small molecules can be promoted even in the absence of natural uptake mechanisms.

Di(ethylene glycol) methyl ether methacrylate (DEGMEMA)-derived gels align small organic molecules in methanol.

Residual dipolar couplings (RDCs) constitute an important NMR parameter for structural elucidation in all areas of chemistry. In this study, di(ethylene glycol) methyl ether methacrylate (DEGMEMA)-based gels are introduced as alignment media for the measurement of RDCs of small organic molecules in polar solvents such as methanol. The low viscosity of methanol permits the execution of J-scaled BIRD HSQC experiments that yield very sharp lines in anisotropic conditions. The gels have excellent mechanical properties, and their compression and expansion in the swollen state can be reversed and performed multiple times. This process enables the easy loading and release of analytes. The excellent performance of these new aligning gels is demonstrated by analyzing the structure of the alkaloid retrorsine. Copyright © 2016 John Wiley & Sons, Ltd.

Reversible Deactivation Radical Polymerization of Monomers Containing Activated Aziridine Groups.

Polymers bearing activated aziridine groups are attractive precursors to α-substituted-ß-amino-functionalized materials due to the enhanced reactivity of the pendant aziridine functionalities toward ring-opening by nucleophiles. Two aziridine-containing styrenic monomers, 2-(4-vinylphenyl)aziridine (VPA) and N-mesyl-2-(4-vinylphenyl)aziridine (NMVPA), were polymerized under a variety of reversible deactivation radical polymerization conditions. Low-catalyst-concentration atom transfer radical polymerization (LCC-ATRP) and reversible addition-fragmentation chain-transfer (RAFT) polymerization were ineffective at producing well-defined polymers from VPA due to side reactions between the aziridine functionalities and the agents controlling the polymerizations (catalysts or chain transfer agents). PolyVPA produced under nitroxide-mediated polymerization (NMP) conditions had narrow molecular weight distribution at low to moderate conversions of monomer, but branched and eventually cross-linked polymers were formed at higher conversions due to ring-opening reactions of the aziridine groups. Most of these undesirable side reactions were eliminated by attaching a methanesulfonyl (mesyl) group to the aziridine nitrogen atom, and well-defined linear homopolymers with targeted molecular weights were realized from NMVPA under RAFT and NMP conditions; however, side reactions between the aziridine groups and the catalyst in LCC-ATRP still occured and the polymerization was uncontrolled using this technique.

Macromolecular engineering by atom transfer radical polymerization.

This Perspective presents recent advances in macromolecular engineering enabled by ATRP. They include the fundamental mechanistic and synthetic features of ATRP with emphasis on various catalytic/initiation systems that use parts-per-million concentrations of Cu catalysts and can be run in environmentally friendly media, e.g., water. The roles of the major components of ATRP--monomers, initiators, catalysts, and various additives--are explained, and their reactivity and structure are correlated. The effects of media and external stimuli on polymerization rates and control are presented. Some examples of precisely controlled elements of macromolecular architecture, such as chain uniformity, composition, topology, and functionality, are discussed. Syntheses of polymers with complex architecture, various hybrids, and bioconjugates are illustrated. Examples of current and forthcoming applications of ATRP are covered. Future challenges and perspectives for macromolecular engineering by ATRP are discussed.

Epoxides as reducing agents for low-catalyst-concentration atom transfer radical polymerization.

Activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) conditions utilizing a low concentration of catalyst are successfully applied for the preparation of well-defined poly(glycidyl methacrylate) without the addition of external reducing agents. The living character of polymerization is evidenced by successful chain extensions with methyl methacrylate and methyl acrylate, again, in the absence of additional reducing agents, yielding block copolymers. The epoxide groups in glycidyl methacrylate or the corresponding polymer can serve as an intrinsic reducing agent to continuously regenerate the Cu(I) -based ATRP activator from the Cu(II) halide complex present in the systems. The reactivity of various epoxides in the reduction of the Cu(II) Br2 complex of tris(2-pyridylmethyl)amine is compared.

Multibrominated hyperbranched polymers: synthesis and further functionalizations by ARGET ATRP or click chemistry.

Hyperbranched polymers with multiple alkyl bromide peripheral groups were synthesized by the copolymerization of styrene with ethylene glycol dimethacrylate (2.5, 5.0, 7.5, or 10.0 mol% relative to styrene) in the presence of CBr(4) (10-20-fold excess vs. the radical initiator). The latter compound markedly delayed the gelation and served as the source of terminal bromine atoms via transfer to the propagating radicals. The degree of branching increased with the amount of crosslinker. The alkyl bromide groups were used in further chemical modifications (ATRP at low catalyst concentration or azidation with NaN(3) followed by CuBr-catalyzed click coupling of an alkyne-terminated polymer) that yielded star copolymers with hyperbranched cores.

New strategy for RDC-assisted diastereotopic proton assignment using a combination of J-scaled BIRD HSQC and J-scaled BIRD HMQC/HSQC.

A new strategy to assign diastereotopic protons was developed on the basis of residual dipolar couplings (RDCs) collected in compressed poly(methyl methacrylate) (PMMA) gels. A combination of 2D J-scaled BIRD HSQC and J-scaled BIRD HMQC/HSQC NMR experiments was used to collect the RDC data. In the proposed strategy, the first experiment is used to measure (1)D(CH) for methine groups, the sum of (1)D(CHa) + (1)D(CHb) for methylene groups and the average (1)D(CH3) value for methyl groups. In turn, the small molecule alignment tensor is calculated using these D values without the a priori assignment of CH(2) diastereotopic protons. The D values of each individual CH bond (CHa and CHb) of each methylene group in the molecule are then predicted using the calculated alignment tensor and these values compared with the results from the HMQC/HSQC experiment, leading to their unambiguous assignment. This strategy is demonstrated with the alkaloid strychnine that contains five methylene groups with diastereotopic protons, and our results fully agree with the previously reported assignment using combinations of permutated assignments.

Unprecedented stereoselective synthesis of cyclopenta[b]benzofuran derivatives and their characterisation assisted by aligned media NMR and 13C chemical shift ab initio predictions.

A new approach to the synthesis of cyclopenta[b]benzofuran derivatives via reaction of 1,3-dicarbonyl compounds with α,ß,γ,δ-unsaturated aldehydes is described. The constitution and configuration of the new products have been firmly established by means of residual dipolar couplings (RDCs) and ab initio (13)C NMR chemical shift predictions.

Nanostructured functional materials prepared by atom transfer radical polymerization.

Atom transfer radical polymerization (ATRP) is the most extensively studied controlled/living radical polymerization (CRP) method, with the interest originating primarily in its simplicity and broad applicability, and in the ability to prepare previously inaccessible well-defined nanostructured polymeric materials. This review illustrates the range of well-defined advanced functional materials that can be prepared by ATRP. We detail the precise synthesis of macromolecules with predetermined molecular weight, designed molecular weight distribution, controlled topology, composition and functionality. The materials include polymers with site-specific functionalities and novel architectures that are starting to find commercial application--such as stars, bottle brushes, block and gradient copolymers. This is followed by discussing their self-assembly into materials with nanoscale morphologies. These macromolecular engineering procedures provide new avenues to nanostructured functional materials for many high-value applications, for example as thermoplastic elastomers, coatings, surfactants, dispersants and as optoelectronic and biomedical materials.

Understanding atom transfer radical polymerization: effect of ligand and initiator structures on the equilibrium constants.

Equilibrium constants in Cu-based atom transfer radical polymerization (ATRP) were determined for a wide range of ligands and initiators in acetonitrile at 22 degrees C. The ATRP equilibrium constants obtained vary over 7 orders of magnitude and strongly depend on the ligand and initiator structures. The activities of the Cu(I)/ligand complexes are highest for tetradentate ligands, lower for tridentate ligands, and lowest for bidentate ligands. Complexes with tripodal and bridged ligands (Me6TREN and bridged cyclam) tend to be more active than those with the corresponding linear ligands. The equilibrium constants are largest for tertiary alkyl halides and smallest for primary alkyl halides. The activities of alkyl bromides are several times larger than those of the analogous alkyl chlorides. The equilibrium constants are largest for the nitrile derivatives, followed by those for the benzyl derivatives and the corresponding esters. Other equilibrium constants that are not readily measurable were extrapolated from the values for the reference ligands and initiators. Excellent correlations of the equilibrium constants with the Cu(II/I) redox potentials and the carbon-halogen bond dissociation energies were observed.

Stretched poly(methyl methacrylate) gel aligns small organic molecules in chloroform. stereochemical analysis and diastereotopic proton NMR assignment in ludartin using residual dipolar couplings and 3J coupling constant analysis.

Poly(methyl methacrylate) (PMMA) gels prepared by copolymerizing methyl methacrylate (MMA) and various amounts of ethylene glycol dimethacrylate (EGDMA) in the presence of the radical initiator V-70 (2,2'-azobis(2,4-dimethyl-4-methoxyvaleronitrile)) can orient small organic molecules when swollen in NMR tubes with CDCl(3). The aligning properties of the stretched PMMA gels were evaluated by monitoring the quadrupolar splitting of the (2)H NMR signal of CDCl(3), and the aligning degree is proportional to the cross-linking density. Natural abundance one-bond (1)H-(13)C residual dipolar couplings (RDCs) for menthol measured in the gels depended on the cross-link density. The stereochemistry and assignment of the diastereotopic protons of the gastroprotective and nonsteroidal aromatase inhibitor sesquiterpene lactone ludartin, isolated from Stevia yaconensis var. subeglandulosa, were unambiguously determined using a combination of natural abundance one-bond (1)H-(13)C RDCs measured in a PMMA gel and a (3)J coupling constant analysis.

"Hairy" single-walled carbon nanotubes prepared by atom transfer radical polymerization.

"Hairy nano-objects" are hybrid nanostructures comprising a core surrounded by a "hairlike" corona of flexible polymer chains, the role of which is typically to improve the solubility of the core material or to improve its dispersability and adhesion in other polymer matrices. Both aspects could be particularly useful with carbon nanotubes, especially in their applications as reinforcing agents. The controlled synthesis of hairy carbon nanotubes is accomplished by chemical modification with 2-bromopropionate followed by extension with poly(n-butyl acrylate) through atom transfer radical polymerization. The obtained hairy nanotubes are visualized at nearly molecular resolution with tapping-mode atomic force microscopy, providing insight into the uniformity of grafted chain lengths and grafting density. The grafting densities vary from approximately 1.0-10.0 chains nm(-1) along the nanotubes. Such a wide range of grafting density may indicate some chemical heterogeneity along and between the nanotubes; it may be also an indication of the challenges associated with carrying out chemical modification of nano-objects having high tendency to aggregate.

Highly active copper-based catalyst for atom transfer radical polymerization.

Atom transfer radical polymerization (ATRP) generally requires a catalyst/initiator molar ratio of 0.1 to 1 and catalyst/monomer molar ratio of 0.001 to 0.01 (i.e., catalyst concentration: 1000-10,000 ppm versus monomer). Herein, we report a new copper-based complex CuBr/N,N,N',N'-tetrakis(2-pyridylmethyl)ethylenediamine (TPEN) as a versatile and highly active catalyst for acrylic, methacrylic, and styrenic monomers. The catalyst mediated ATRP at a catalyst/initiator molar ratio of 0.005 and produced polymers with well-controlled molecular weights and low polydispersities. ATRP occurred even at a catalyst/initiator molar ratio as low as 0.001 with copper concentration in the produced polymers as low as 6-8 ppm (catalyst/monomer molar ratio = 10(-5)). The catalyst structures were studied by X-ray diffraction and NMR spectroscopy. The activator CuIBr/TPEN existed in solution as binuclear and mononuclear complexes in equilibrium but as a binuclear complex in its single crystals. The deactivator CuIIBr2/TPEN complex was mononuclear. High stability and appropriate KATRP (ATRP equilibrium constant) were found crucial for the catalyst working under high dilution or in coordinating solvents/monomers. This provides guidance for further design of highly active ATRP catalysts.

Diminishing catalyst concentration in atom transfer radical polymerization with reducing agents.

The concept of initiators for continuous activator regeneration (ICAR) in atom transfer radical polymerization (ATRP) is introduced, whereby a constant source of organic free radicals works to regenerate the Cu(I) activator, which is otherwise consumed in termination reactions when used at very low concentrations. With this technique, controlled synthesis of polystyrene and poly(methyl methacrylate) (Mw/Mn < 1.2) can be implemented with catalyst concentrations between 10 and 50 ppm, where its removal or recycling would be unwarranted for many applications. Additionally, various organic reducing agents (derivatives of hydrazine and phenol) are used to continuously regenerate the Cu(I) activator in activators regenerated by electron transfer (ARGET) ATRP. Controlled polymer synthesis of acrylates (Mw/Mn < 1.2) is realized with catalyst concentrations as low as 50 ppm. The rational selection of suitable Cu complexing ligands {tris[2-(dimethylamino)ethyl]amine (Me6TREN) and tris[(2-pyridyl)methyl]amine (TPMA)} is discussed in regards to specific side reactions in each technique (i.e., complex dissociation, acid evolution, and reducing agent complexation). Additionally, mechanistic studies and kinetic modeling are used to optimize each system. The performance of the selected catalysts/reducing agents in homo and block (co)polymerizations is evaluated.

Inverse miniemulsion ATRP: a new method for synthesis and functionalization of well-defined water-soluble/cross-linked polymeric particles.

A new methodology for the synthesis and functionalization of nanometer-sized colloidal particles consisting of well-defined, water-soluble, functional polymers with narrow molecular weight distribution (M(w)/M(n) < 1.3) was developed, utilizing atom transfer radical polymerization (ATRP) of water-soluble monomers in an inverse miniemulsion. The optional introduction of a disulfide-functionalized cross-linker allowed for the synthesis of cross-linked (bio)degradable nanogels. Dynamic light scattering (DLS) and atomic force microscopy (AFM) measurements indicated that these particles possessed excellent colloidal stability. ATRP in inverse miniemulsion led to materials with several desirable features. The colloidal particles preserved a high degree of halogen chain-end functionality, which enabled further functionalization. Cross-linked nanogels with a uniformly cross-linked network were prepared. They were degraded to individual polymeric chains with relatively narrow molecular weight distribution (M(w)/M(n) < 1.5) in a reducing environment. Higher colloidal stability, higher swelling ratios, and better controlled degradability indicated that the nanogels prepared by ATRP were superior to their corresponding counterparts prepared by conventional free radical polymerization (RP) in inverse miniemulsion.