ABSTRACT
Medicines for children often taste bitter, presenting a significant challenge to treatment compliance. However, most studies on paediatric drug development rely on adult volunteers for sensory research, and the level of expertise required from these assessors is unclear. This study aimed to address this gap by investigating perceived bitterness aversion to taste strips impregnated with different concentrations of quinine hydrochloride in 439 school-aged children. Expert (n = 26) and naïve (n = 65) young adult assessors evaluated quinine solutions as well as taste strips, for methodological bridging purposes. All assessors differentiated the aversiveness of the taste strips in a dose dependent manner. Younger children aged 4-8 years had difficulty discriminating higher bitter concentrations, whereas pre-adolescents 9-11 years and naive adults showed better discrimination at the top of the scale. Naive assessors showed similar bitter perception as children. However, the results were slightly different between strips and solution in adults. These findings highlight the key role that adult panels can play in paediatric formulation development. Taste strips show promise as a safe and pragmatic tool for sensory pharmaceutical evaluations, though further studies are warranted to establish the relationship between age and hedonic taste perception using compounds with diverse physicochemical and sensory qualities.
Subject(s)
Taste Perception , Taste , Adolescent , Humans , Child , Young Adult , Quinine , Drug DevelopmentABSTRACT
It is well established that treatment regime compliance is linked to the acceptability of a pharmaceutical formulation, and hence also to therapeutic outcomes. To that end, acceptability must be assessed during the development of all pharmaceutical products and especially for those intended for paediatric patients. Although acceptability is a multifaceted concept, poor sensory characteristics often contribute to poor patient acceptability. In particular, poor taste is often cited as a major reason for many patients, especially children, to refuse to take their medicine. It is thus important to understand and, as far as possible, optimise the sensory characteristics and, in particular, the taste/flavour/mouthfeel of the formulation throughout the development of the product. Sensory analysis has been widely practiced, providing objective data concerning the sensory aspects of food and cosmetic products. In this paper, we present proposals concerning how the well-established principles of sensory analysis can best be applied to pharmaceutical product development, allowing objective, scientifically valid, sensory data to be obtained safely. We briefly discuss methodologies that may be helpful in reducing the number of samples that may need to be assessed by human volunteers. However, it is only possible to be sure whether or not the sensory characteristics of a pharmaceutical product are non-aversive to potential users by undertaking sensory assessments in human volunteers. Testing is also required during formulation assessment and to ensure that the sensory characteristics remain acceptable throughout the product shelf life. We provide a risk assessment procedure to aid developers to define where studies are low risk, the results of a survey of European regulators on their views concerning such studies, and detailed guidance concerning the types of sensory studies that can be undertaken at each phase of product development, along with guidance about the practicalities of performing such sensory studies. We hope that this guidance will also lead to the development of internationally agreed standards between industry and regulators concerning how these aspects should be measured and assessed throughout the development process and when writing and evaluating regulatory submissions. Finally, we hope that the guidance herein will help formulators as they seek to develop better medicines for all patients and, in particular, paediatric patients.
ABSTRACT
Primaquine is an important antimalarial drug for malaria transmission blocking and radical cure, but it is not currently available in child-friendly formulations in appropriate doses. Adult-strength tablets are often crushed and dissolved in water to obtain the required dose, which exposes the drug's bitter taste. As part of the developing paediatric primaquine (DPP) project, this study adopted a responsive sensory pharmaceutics approach by integrating real-time formulation development and pre-clinical taste assessment to develop palatable, flavour-infused primaquine tablets. A design of experiment (DoE) approach was used to screen different taste-masking agents and excipient blends with trained, expert sensory assessors, with quinine hydrochloride as a model bitter tastant. The taste-masking efficacy of selected prototype formulation blends was validated with naïve assessors using the highest 15 mg primaquine dose. The mean bitterness intensity rating, measured on a discrete 11-point scale, was halved from 7.04 for the unflavoured control to 2.74-3.70 for the formulation blends. Sucralose had the biggest impact on bitterness suppression and improving palatability. Two different flavouring systems have been developed, and their acceptability in paediatric patients will be assessed as part of upcoming validation field clinical trials in Africa.
ABSTRACT
The colour of a product plays an important role in consumer experiences, and in the context of pharmaceutical products, this could potentially affect a patient's expectations, behaviours, and adherence. Several studies have been conducted on adults, but little is known about children's opinions on colours of medicines and to what extent medicines' colour affects their acceptability. To address this gap, a systematic search in PubMed, Scopus, MEDLINE, and Web of Science was conducted. Two authors independently screened the titles, abstracts, and references of all articles and selected studies conducted on children (0-18 years old), assessing children's preferences or opinions about colour of oral dosage forms as either a primary or secondary objective or as an anecdotal record. A total of 989 publications were identified and, after screening, 18 publications were included in the review. Red and pink were the most liked colours and there appeared to be a relationship between the colour of a medicine and expected taste/flavour. The review also highlighted a scarcity of information, usually collected as an anecdotal record. Several gaps in the current knowledge were underlined, emphasizing the need of patient-centred studies to understand if the use of certain colours can improve or worsen the acceptability of a paediatric medicine. This will help inform pharmaceutical manufacturers and regulators on the role and need of colours in children's medicines beyond quality purposes.
ABSTRACT
Orodispersible films (ODFs) have been widely used in paediatric, geriatric and dysphagic patients due to ease of administration and precise and flexible dose adjustments. ODF fabrication has seen significant advancements with the move towards more technologically advanced production methods. The acceptability of ODFs is dependent upon film composition and process of formation, which affects disintegration, taste, texture and mouthfeel. There is currently a lack of testing to accurately assess ODFs for these important acceptability sensory perceptions. This study produced four ODFs formed of polyvinyl alcohol and sodium carboxymethylcellulose using 3D printing. These were assessed using three in vitro methods: Petri dish and oral cavity model (OCM) methods for disintegration and bio-tribology for disintegration and oral perception. Increasing polymer molecular weight (MW) exponentially increased disintegration time in the Petri dish and OCM methods. Higher MW films adhered to the OCM upper palate. Bio-tribology analysis showed that films of higher MW disintegrated quickest and had lower coefficient of friction, perhaps demonstrating good oral perception but also stickiness, with higher viscosity. These techniques, part of a toolbox, may enable formulators to design, test and reformulate ODFs that both disintegrate rapidly and may be better perceived when consumed, improving overall treatment acceptability.
ABSTRACT
Spironolactone (SPL), a potent anti-aldosterone steroidal drug used to treat several diseases in paediatric patients (e.g., hypertension, primary aldosteronism, Bartter's syndrome, and congestive heart failure), is not available in child-friendly dosage forms, and spironolactone liquids have been reported to be unpalatable. Aiming to enhance SPL solubility in aqueous solution and overcome palatability, herein, the effects of (2-hydroxypropyl)-ß-cyclodextrin (HP-ß-CyD) were thoroughly investigated on solubilisation in water and on masking the unpleasant taste of SPL in vivo. Although the complexation of SPL with HP-ß-CyD was demonstrated through phase solubility studies, Job's plot, NMR and computational docking studies, our in vivo tests did not show significant effects on taste aversion. Our findings, on the one hand, suggest that the formation of an inclusion complex of SPL with HP-ß-CyD itself is not necessarily a good indicator for an acceptable degree of palatability, whereas, on the other hand, they constitute the basis for investigating other cyclodextrin-based formulations of the poorly water-soluble steroidal drug, including solid dosage forms, such as spray-dried powders and orodispersible tablets.
ABSTRACT
INTRODUCTION: The field of neonatal, infant and toddler pharmaceutical development is constantly improving, however a lag still remains in comparison to older children and adults. Their rapid anatomical, physiological and behavioral developmental rates pose extra challenges in diagnosing, treating, or preventing their disease. In turn, this brings complexity in formulating truly age-appropriate medicinal products that suit this heterogeneous pediatric subset. Progress in the availability of such products has ensued following the introduction of the 2007 European Union Pediatric Regulation, and in recent years, oral multiparticulate and dispersible solid formulations have gained interest alongside liquid formulations. However, the need is still great for dosage forms that do not compromise on pharmaceutical efficacy, safety and global accessibility in those aged under 2. AREAS COVERED: This article highlights some of the formulation challenges correlated with this age group and critically explores recent solid age-appropriate formulations and their administration devices for enteral drug delivery. EXPERT OPINION: There are many formulation requirements to consider when formulating drug products for children aged under 2. Efforts are required into understanding acceptability in this age group and of their carers, and whether innovation or optimization is required, to help guide formulators toward optimal approaches without impacting access.
Subject(s)
Chemistry, Pharmaceutical , Drug Delivery Systems , Adolescent , Child, Preschool , Drug Development , European Union , Humans , Infant , Infant, Newborn , Pharmaceutical PreparationsABSTRACT
Developing suitable paediatric formulations and ensuring access to them by the greatest number of the 2.2 billion children worldwide are equally important to provide optimal pharmacotherapy. This review focuses on the progress made over the last two decades with paediatric oral formulations with respect to evidence for acceptability and dosing flexibility of liquid and solid oral dosage forms. It also discusses the clinical needs for, and the access to, paediatric formulations for existing authorised medicines. A significant body of new knowledge now supports the acceptability of solid oral dosage forms in children, resulting in an increasing number of medicines commercialised as multiparticulates, including minitablets that are starting to be brought to market. However, there are gaps with these formulations that deserve more research. Even though efforts have been made to identify medicines in need of age-appropriate formulations, there is no common priority list shared internationally. Such prioritisation would help to develop paediatric formulations with the greatest potential for providing a health benefit to children worldwide. In addition, available data highlight that paediatric formulation access is fragmented and unequal, with commercialisation of suitable paediatric formulations too often limited to some countries/regions. We propose actions to better align decisions during the development of paediatric formulations and promote a more globalised approach to facilitate registration pathways between different jurisdictions. Furthermore, discussions about alignment between approval, pricing and reimbursement processes should also happen, leaving working in siloes behind us. It is time for adults to start thinking outside the box for children.
Subject(s)
Pharmaceutical Preparations , Adult , Child , Humans , PediatricsABSTRACT
Milk is often used as a dispersion medium for medicines administration in young children but its taste-masking ability is unknown. A human taste panel was conducted to assess the potential of infant formula milk (Aptamil® 1) to mask the taste of two model WHO priority medicines, zinc sulfate and paracetamol, manufactured as dispersible tablets. Simultaneously, the palatability of powder blends of the tablet platforms was assessed. Twenty healthy adult volunteers performed a swirl-and-spit assessment of placebos and API-containing blends in either a lactose-based or a mannitol-based dispersible tablet platform, reconstituted in 10 mL of either water or Aptamil® 1. Eighteen samples were rated for aversion using a 100-mm Visual Analogue Scale, grittiness using a 5-point Likert scale, and "acceptability-as-a-medicine" evaluated as: "Would you find this sample acceptable to swallow as a medicine?" with binary answers of Yes/No. The API-containing formulations were more aversive than the placebos; the paracetamol-containing samples being more aversive than zinc sulfate samples. The platforms themselves were not aversive. Non-gritty samples had four-fold greater odds of being acceptable as a medicine. Aptamil® 1 masked the taste of zinc sulfate in the mannitol-based formulation but did not mask the taste of paracetamol in either platform, suggesting a limited taste-masking ability, which may be API and formulation dependent.
ABSTRACT
INTRODUCTION: The WHO Essential Medicine List for children (EMLc) is used for promoting access to medicines. The age-appropriateness of enteral (oral and rectal) formulations for children depend on their adaptability/flexibility to allow age-related or weight-related doses to be administered/prescribed and the child's ability to swallow, as appropriate. There is scant information on the age-appropriateness of essential enteral medicines for children. OBJECTIVE: To evaluate the age-appropriateness of enteral essential medicines. MATERIALS AND METHODS: Age-appropriateness of all enteral formulations indicated and recommended in the EMLc 3rd to 7th (2011-2019) editions were determined by assessing swallowability and/or dose adaptability for children under 12 years, stratified into five age groups. RESULTS: Enteral formulations in the EMLc were more age-appropriate for older children aged 6-11 years than for younger children. In the 3rd edition, for older children, 77%, n=342, of formulations were age-appropriate. For younger children, age-appropriateness decreased with age group: 34% in those aged 3-5 years, 30% in those aged 1-2 years, 22% among those aged 28 days to 11 months and 15% in those aged 0-27 days. Overall, similar proportions were found for the 7th edition. In contrast, the majority of medicines in the 7th list were age-appropriate in targeted diseases like HIV and tuberculosis. CONCLUSION: Most recommended enteral essential medicines in EMLc 2011 and 2019 were not age-appropriate for children <6 years. Medicines which are not age-appropriate must be manipulated before administration, leading to potential issues of safety and efficacy. Evaluation of the age-appropriateness of formulations for medicines to be included in EMLc could improve access to better medicines for children in the future.
Subject(s)
Drugs, Essential , Adolescent , Child , Drug Compounding , Forecasting , Humans , Pharmaceutical Preparations , World Health OrganizationABSTRACT
Improved global access to novel age-appropriate formulations for paediatric subsets, either of new chemical entities or existing drugs, is a priority to ensure that medicines meet the needs of these patients. However, despite regulatory incentives, the introduction to the market of paediatric formulations still lags behind adult products. This is mainly caused by additional complexities associated with the development of acceptable age-appropriate paediatric medicines. This position paper recommends the use of a paediatric Quality Target Product Profile as an efficient tool to facilitate early planning and decision making across all teams involved in paediatric formulation development during the children-centric formulation design for new chemical entities, or to repurpose/reformulate off-patent drugs. Essential key attributes of a paediatric formulation are suggested and described. Moreover, greater collaboration between formulation experts and clinical colleagues, including healthcare professionals, is advocated to lead to safe and effective, age-appropriate medicinal products. Acceptability testing should be a secondary endpoint in paediatric clinical trials to ensure postmarketing adherence is not compromised by a lack of acceptability. Not knowing the indications and the related age groups and potential dosing regimens early enough is still a major hurdle for efficient paediatric formulation development; however, the proposed paediatric Quality Target Product Profile could be a valuable collaborative tool for planning and decision making to expedite paediatric product development, particularly for those with limited experience in developing a paediatric product.
Subject(s)
Nonprescription Drugs , Physicians , Humans , Child , AdultABSTRACT
Palatability is amongst the most important determinants of whether or not a child will take a medicine. In order to increase concordance with treatment regimens it is often necessary to utilise a range of formulation techniques to improve the palatability of medicines. These can include selecting a different molecule or version of a molecule (such as a different polymorph or salt form), various taste masking techniques and/or the inclusion of flavours and sweeteners. In order to be able to understand the taste of the Active Pharmaceutical Ingredient (API) and to validate the formulation approach used, it is necessary to be able to use the most reliable taste evaluation method possible. Multiple in vivo and in vitro methods exist nowadays or are proposed in the literature but are often little understood by the pharmaceutical product development community. In particular, different methods may be more relevant at different stages of product development. The aim of this article is to propose a tool to guide the selection of the most appropriate method for the desired evaluation. A spreadsheet-based tool is proposed that is designed to allow the systematic assessment of the applicability of any taste assessment technique existing or new to the users proposed application. A series of criteria are defined that will allow the user to assess the analytical, usability and availability factors for the technique that is being considered. Such a systematic review will help the user to understand the benefits and risks of using each methodology for that application. The use of the tool is illustrated based on currently available data and literature. As new/existing methods are developed/improved, the outcomes of the tool may change.
Subject(s)
Sweetening Agents , Taste , Child , Drug Development , Flavoring Agents , HumansABSTRACT
The present study describes the use of two taste-masking polymers to fabricate a formulation of chlorpheniramine maleate for paediatric administration. Co-axial electrospinning was utilized to create layered nanofibres; the two polymers, Eudragit® E PO and Kollicoat® Smartseal, were alternated between the core and the shell of the system in order to identify the optimum taste-masked formulation. The drug was loaded in the core on all occasions. It was found that the formulation with Kollicoat® Smartseal in the core with the drug, and Eudragit® E PO in the shell showed the most effective taste-masking compared to the other formulations. These fibres were in the nano-range and had smooth morphology as verified by scanning electron microscopy. Solid-state characterization and thermal analysis confirmed that amorphous solid dispersions were formed upon electrospinning. The Insent E-tongue was used to assess the taste-masking efficiency of the samples, and it was found that this formulation was undetectable by the bitter sensor, indicating successful taste-masking compared to the raw version of the drug. The E-tongue also confirmed the drug's bitterness threshold as compared to quinine HCl dihydrate, a parameter that is useful for formulation design and taste-masking planning.
ABSTRACT
For the last 40 years, praziquantel has been the standard treatment for schistosomiasis, a neglected parasitic disease affecting more than 250 million people worldwide. However, there is no suitable paediatric formulation on the market, leading to off-label use and the splitting of commercial tablets for adults. In this study, we use a recently available technology, direct powder extrusion (DPE) three-dimensional printing (3DP), to prepare paediatric Printlets™ (3D printed tablets) of amorphous solid dispersions of praziquantel with Kollidon® VA 64 and surfactants (Span™ 20 or Kolliphor® SLS). Printlets were successfully printed from both pellets and powders obtained from extrudates by hot melt extrusion (HME). In vitro dissolution studies showed a greater than four-fold increase in praziquantel release, due to the formation of amorphous solid dispersions. In vitro palatability data indicated that the printlets were in the range of praziquantel tolerability, highlighting the taste masking capabilities of this technology without the need for additional taste masking excipients. This work has demonstrated the possibility of 3D printing tablets using pellets or powder forms obtained by HME, avoiding the use of filaments in fused deposition modelling 3DP. Moreover, the main formulation hurdles of praziquantel, such as low drug solubility, inadequate taste, and high and variable dose requirements, can be overcome using this technology.
ABSTRACT
The paucity of evidence-based data on formulation characteristics preferred by the children is known to limit the design of tailored paediatric dosage forms. The European Paediatric Translational Research Infrastructure (EPTRI) commissioned a study to evaluate children's dosage forms perceived preferences in some European countries and explore the feasibility of using the young persons advisory groups (YPAGs) to involve children in formulation research. An online, age-adapted survey was developed and translated into six languages. The survey link was disseminated across seven European countries: Albania, Italy, the Netherlands, and Dutch-speaking part of Belgium, Romania, Spain, and the United Kingdom. Respondents' (n = 1172) perceived preferences for oral dosage forms primarily differed based on age, health status, and experience. Conventional dosage forms, i.e., liquid (35%), tablets (19%), and capsules (14%), were the most selected. Liquid was widely selected by children less than 12 years and by those healthy and taking medicines rarely. Monolithic solid forms were mostly chosen by adolescents and by children with a chronic disease taking medicines frequently. There was a clear lack of familiarity with more novel dosage forms (e.g., orodispersible films and granules). Noteworthy, granules were not appreciated, particularly by adolescents (52.8%). To rationalise the creation of paediatric formulations, it is important to involve children as active stakeholders and to apply tools assessing children's perspectives on medicines to inform acceptable dosage form development from the start.
ABSTRACT
Acceptable palatability of an oral dosage form is crucial to patient compliance. Excipients can be utilised within a formulation to mask the bitterness of a drug. One such category is the bitter-blockers. This term is used inconsistently within the literature and has historically been used to describe any additive which alters the taste of an unpleasant compound. This review defines a bitter-blocker as a compound which interacts with the molecular pathway of bitterness at a taste-cell level and compiles data obtained from publication screening of such compounds. Here, a novel scoring system is created to assess their potential utility in a medicinal product using factors such as usability, safety, efficacy and quality of evidence to understand their taste-masking ability. Sodium acetate, sodium gluconate and adenosine 5'monophophate each have a good usability and safety profile and are generally regarded as safe and have shown evidence of bitter-blocking in human sensory panels. These compounds could offer a much needed option to taste-mask particularly aversive medicines where traditional methods alone are insufficient.
Subject(s)
Excipients/pharmacology , Taste/drug effects , Administration, Oral , Drug Compounding/methods , Excipients/chemistry , Humans , Medication AdherenceABSTRACT
Access to medicines, including their availability and affordability, is a major public health challenge worldwide. This research aimed to characterise rectal formulations containing amoxicillin for the treatment of pneumonia in children under five, as an accessible alternative to existing formulations. Lipophilic Suppocire (S-NA15) and hydrophilic polyethylene glycol (PEG; 80% PEG 1500 and 20% PEG 4000, w/w) suppositories containing 250 mg amoxicillin were prepared. Hardness, apparent viscosity, uniformity of mass, uniformity of content, disintegration and dissolution time were determined. Irritation potential was screened using a slug mucosal assay and antibacterial efficacy against Staphylococcus aureus determined by isothermal microcalorimetry. Both lipophilic and hydrophilic formulations met the European Pharmacopoeia standards for suppositories when tested in vitro. They disintegrated within 30 min with rapid amoxicillin release profiles (98.6 ± 0.9%, 94.9 ± 1.2% over 30 min, respectively). Over-encapsulation of S-NA15 suppositories with hydroxypropyl methylcellulose shells slowed drug release and improved stability over 2 months. S-NA15 suppositories were classified as non-irritant and PEG suppositories only mildly irritant. Antibacterial efficacy of formulations was equivalent to amoxicillin alone. Both PEG and over-encapsulated S-NA15 rectal formulations developed in the present work have shown promise based on pre-clinical screening, and further development is justified to develop a product with commercial potential.
Subject(s)
Amoxicillin , Pneumonia , Child , Drug Compounding , Drug Liberation , Humans , SuppositoriesABSTRACT
Optimum use of generic products would require equivalence, not only in terms of quality, safety, and efficacy in clinical studies, but also patient acceptability to not jeopardize treatment success because of non-adherence which would de facto limit the potential cost saving anticipated by their use. Although acceptability is a requirement for the authorization of pediatric innovator products, a survey of European Union (EU) regulatory authorities showed that few have a formal process for assessing patient acceptability of generic products during the registration processes. The current International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use (ICH) focus on unifying guidance for the development and scrutiny of generics but should include acceptability alongside the other factors being considered for harmonization.
Subject(s)
Drug Approval/legislation & jurisprudence , Drug Development/methods , Drugs, Generic/administration & dosage , Administration, Oral , Drugs, Generic/adverse effects , Drugs, Generic/standards , European Union , Humans , Internationality , Patient Acceptance of Health Care , Taste , Therapeutic EquivalencyABSTRACT
3D printing (3DP) in the pharmaceutical field is a disruptive technology that allows the preparation of personalised medicines at the point of dispensing. The paediatric population presents a variety of pharmaceutical formulation challenges such as dose flexibility, patient compliance, taste masking and the fear or difficulty to swallow tablets, all factors that could be overcome using the adaptable nature of 3DP. User acceptability studies of 3D printed formulations have been previously carried out in adults; however, feedback from children themselves is essential in establishing the quality target product profile towards the development of age-appropriate medicines. The aim of this study was to investigate the preference of children for different 3D printed tablets (Printlets™) as an important precursor to patient acceptability studies. Four different 3DP technologies; digital light processing (DLP), selective laser sintering (SLS), semi-solid extrusion (SSE) and fused deposition modeling (FDM) were used to prepare placebo printlets with similar physical attributes including size and shape. A single-site, two-part survey was completed with participants aged 4-11 years to determine their preference and opinions based on visual inspection of the printlets. A total of 368 participants completed an individual open questionnaire to visually select the best and worst printlet, and 310 participants completed further non-compulsory open questions to elaborate on their choices. Overall, the DLP printlets were the most visually appealing to the children (61.7%) followed by the SLS printlets (21.2%), and with both the FDM (5.4%) and SSE (11.7%) printlets receiving the lowest scores. However, after being informed that the SSE printlets were chewable, the majority of participants changed their selection and favoured this printlet, despite their original choice, in line with children's preference towards chewable dosage forms. Participant age and sex displayed no significant differences in printlet selection. Printlet descriptions were grouped into four distinct categories; appearance, perceived taste, texture and familiarity, and were found to be equally important when creating a quality target product profile for paediatric 3D printed formulations. This study is the first to investigate children's perceptions of printlets, and the findings aim to provide guidance for further development of paediatric-appropriate medicines using different 3DP technologies.
ABSTRACT
AIMS: Research around paediatric rectal drug delivery has previously been based on views of parents and healthcare workers. The aim of this exploratory study was to gauge whether children and young adults in the UK were comfortable with the idea of rectal drug delivery. METHODS: Eleven children from a pre-existing patient and public advisory group were involved in the session. Rectal drug delivery was explained and group participants were asked a series of questions. Responses were discussed in a group and recorded individually. RESULTS: Of the group, 27% would consider the rectal route, while 64% said it depended on other options available. The primary concern focused on potential for abusive misuse by others. Participants thought this would be overcome if the child could self-administer, although there was also concern about the process of self-administration. CONCLUSIONS: Not all children in the UK are against rectal drug delivery, but education is needed to teach children to self-administer medication in this way.