Effect of 6,6'-Substituents on Bipyridine-Ligated Ni Catalysts for Cross-Electrophile Coupling.

A family of 4,4'-tBu2-2,2'-bipyridine (tBubpy) ligands with substituents in either the 6-position, 4,4'-tBu2-6-Me-bpy (tBubpyMe), or 6 and 6'-positions, 4,4'-tBu2-6,6'-R2-bpy (tBubpyR2; R = Me, iPr, sBu, Ph, or Mes), was synthesized. These ligands were used to prepare Ni complexes in the 0, I, and II oxidation states. We observed that the substituents in the 6 and 6'-positions of the tBubpy ligand impact the properties of the Ni complexes. For example, bulkier substituents in the 6,6'-positions of tBubpy better stabilized (tBubpyR2)NiICl species and resulted in cleaner reduction from (tBubpyR2)NiIICl2. However, bulkier substituents hindered or prevented coordination of tBubpyR2 ligands to Ni0(cod)2. In addition, by using complexes of the type (tBubpyMe)NiCl2 and (tBubpyR2)NiCl2 as precatalysts for different XEC reactions, we demonstrated that the 6 or 6,6' substituents lead to major differences in catalytic performance. Specifically, while (tBubpyMe)NiIICl2 is one of the most active catalysts reported to date for XEC and can facilitate XEC reactions at room temperature, lower turnover frequencies were observed for catalysts containing tBubpyR2 ligands. A detailed study on the catalytic intermediates (tBubpy)Ni(Ar)I and (tBubpyMe2)Ni(Ar)I revealed several factors that likely contributed to the differences in catalytic activity. For example, whereas complexes of the type (tBubpy)Ni(Ar)I are low spin and relatively stable, complexes of the type (tBubpyMe2)Ni(Ar)I are high-spin and less stable. Further, (tBubpyMe2)Ni(Ar)I captures primary and benzylic alkyl radicals more slowly than (tBubpy)Ni(Ar)I, consistent with the lower activity of the former in catalysis. Our findings will assist in the design of tailor-made ligands for Ni-catalyzed transformations.

Homogeneous Organic Electron Donors in Nickel-Catalyzed Reductive Transformations.

Many contemporary organic transformations, such as Ni-catalyzed cross-electrophile coupling (XEC), require a reductant. Typically, heterogeneous reductants, such as Zn0 or Mn0, are used as the electron source in these reactions. Although heterogeneous reductants are highly practical for preparative-scale batch reactions, they can lead to complications in performing reactions on process scale and are not easily compatible with modern applications, such as flow chemistry. In principle, homogeneous organic reductants can address some of the challenges associated with heterogeneous reductants and also provide greater control of the reductant strength, which can lead to new reactivity. Nevertheless, homogeneous organic reductants have rarely been used in XEC. In this Perspective, we summarize recent progress in the use of homogeneous organic electron donors in Ni-catalyzed XEC and related reactions, discuss potential synthetic and mechanistic benefits, describe the limitations that inhibit their implementation, and outline challenges that need to be solved in order for homogeneous organic reductants to be widely utilized in synthetic chemistry. Although our focus is on XEC, our discussion of the strengths and weaknesses of different methods for introducing electrons is general to other reductive transformations.

Tunable and Practical Homogeneous Organic Reductants for Cross-Electrophile Coupling.

The syntheses of four new tunable homogeneous organic reductants based on a tetraaminoethylene scaffold are reported. The new reductants have enhanced air stability compared to current homogeneous reductants for metal-mediated reductive transformations, such as cross-electrophile coupling (XEC), and are solids at room temperature. In particular, the weakest reductant is indefinitely stable in air and has a reduction potential of -0.85 V versus ferrocene, which is significantly milder than conventional reductants used in XEC. All of the new reductants can facilitate C(sp2)-C(sp3) Ni-catalyzed XEC reactions and are compatible with complex substrates that are relevant to medicinal chemistry. The reductants span a range of nearly 0.5 V in reduction potential, which allows for control over the rate of electron transfer events in XEC. Specifically, we report a new strategy for controlled alkyl radical generation in Ni-catalyzed C(sp2)-C(sp3) XEC. The key to our approach is to tune the rate of alkyl radical generation from Katritzky salts, which liberate alkyl radicals upon single electron reduction, by varying the redox potentials of the reductant and Katritzky salt utilized in catalysis. Using our method, we perform XEC reactions between benzylic Katritzky salts and aryl halides. The method tolerates a variety of functional groups, some of which are particularly challenging for most XEC transformations. Overall, we expect that our new reductants will both replace conventional homogeneous reductants in current reductive transformations due to their stability and relatively facile synthesis and lead to the development of novel synthetic methods due to their tunability.

A Widely Applicable Dual Catalytic System for Cross-Electrophile Coupling Enabled by Mechanistic Studies.

A dual catalytic system for cross-electrophile coupling reactions between aryl halides and alkyl halides that features a Ni catalyst, a Co cocatalyst, and a mild homogeneous reductant is described. Mechanistic studies indicate that the Ni catalyst activates the aryl halide, while the Co cocatalyst activates the alkyl halide. This allows the system to be rationally optimized for a variety of substrate classes by simply modifying the loadings of the Ni and Co catalysts based on the reaction product profile. For example, the coupling of aryl bromides and aryl iodides with alkyl bromides, alkyl iodides, and benzyl chlorides is demonstrated using the same Ni and Co catalysts under similar reaction conditions but with different optimal catalyst loadings in each case. Our system is tolerant of numerous functional groups and is capable of coupling heteroaryl halides, di-ortho-substituted aryl halides, pharmaceutically relevant druglike aryl halides, and a diverse range of alkyl halides. Additionally, the dual catalytic platform facilitates a series of selective one-pot three-component cross-electrophile coupling reactions of bromo(iodo)arenes with two distinct alkyl halides. This demonstrates the unique level of control that the platform provides and enables the rapid generation of molecular complexity. The system can be readily utilized for a wide range of applications as all reaction components are commercially available, the reaction is scalable, and toxic amide-based solvents are not required. It is anticipated that this strategy, as well as the underlying mechanistic framework, will be generalizable to other cross-electrophile coupling reactions.

Pharmaceutical diversification via palladium oxidative addition complexes.

Palladium-catalyzed cross-coupling reactions have transformed the exploration of chemical space in the search for materials, medicines, chemical probes, and other functional molecules. However, cross-coupling of densely functionalized substrates remains a major challenge. We devised an alternative approach using stoichiometric quantities of palladium oxidative addition complexes (OACs) derived from drugs or drug-like aryl halides as substrates. In most cases, cross-coupling reactions using OACs proceed under milder conditions and with higher success than the analogous catalytic reactions. OACs exhibit remarkable stability, maintaining their reactivity after months of benchtop storage under ambient conditions. We demonstrated the utility of OACs in a variety of experiments including automated nanomole-scale couplings between an OAC derived from rivaroxaban and hundreds of diverse nucleophiles, as well as the late-stage derivatization of the natural product k252a.

Mechanism of Copper-Catalyzed Hydroalkylation of Alkynes: An Unexpected Role of Dinuclear Copper Complexes.

This article describes a mechanistic study of copper-catalyzed hydroalkylation of terminal alkynes. Relying on the established chemistry of N-heterocyclic carbene copper hydride (NHCCuH) complexes, we previously proposed that the hydroalkylation reaction proceeds by hydrocupration of an alkyne by NHCCuH followed by alkylation of the resulting alkenylcopper intermediate by an alkyl triflate. NHCCuH is regenerated from NHCCuOTf through substitution with CsF followed by transmetalation with silane. According to this proposal, NHCCuH must react with an alkyne faster than with an alkyl triflate to avoid reduction of the alkyl triflate. However, we have determined that NHCCuH reacts with alkyl triflates significantly faster than with terminal alkynes, strongly suggesting that the previously proposed mechanism is incorrect. Additionally, we have found that NHCCuOTf rapidly traps NHCCuX (X = F, H, alkenyl) complexes to produce (NHCCu)2(µ-X)(OTf) (X = F, H, alkenyl) complexes. In this article, we propose a new mechanism for hydroalkylation of alkynes that features dinuclear (NHCCu)2(µ-H)(OTf) (X = F, H, alkenyl) complexes as key catalytic intermediates. The results of our study establish feasible pathways for the formation of these intermediates, their ability to participate in the elementary steps of the proposed catalytic cycle, and their ability to serve as competent catalysts in the hydroalkylation reaction. We also provide evidence that the unusual reactivity of the dinuclear complexes is responsible for efficient hydroalkylation of alkynes without concomitant side reactions of the highly reactive alkyl triflates.

Copper-catalyzed hydroalkylation of terminal alkynes.

We have developed a copper-catalyzed hydroalkylation of terminal alkynes using alkyl triflates as coupling partners and (Me(2)HSi)(2)O as a hydride donor. The hydroalkylation proceeds with excellent anti-Markovnikov regioselectivity and provides exclusively (E)-alkenes. We have demonstrated that both alkyl- and aryl-substituted alkynes can be used as substrates, together with 1° alkyl and benzylic triflates. Finally, the transformation can be accomplished in the presence of a wide range of functional groups. Overall, the new hydroalkylation reaction allows highly efficient and diastereospecific synthesis of (E)-alkenes from readily available terminal alkynes and alkyl triflates. On the basis of a preliminary mechanistic study, we propose that the hydroalkylation reaction involves copper hydride formation, hydrocupration of an alkyne, and alkylation of an alkenyl copper intermediate.

Catalytic anti-Markovnikov hydrobromination of alkynes.

We have developed the first catalytic method for anti-Markovnikov hydrobromination of alkynes. The reaction affords terminal E-alkenyl bromides in high yield and with excellent regio- and diastereoselectivity. Both aryl- and alkyl-substituted terminal alkynes can be used as substrates. Furthermore, the reaction conditions are compatible with a wide range of functional groups, including esters, nitriles, epoxides, aryl boronic esters, terminal alkenes, silyl ethers, aryl halides, and alkyl halides. A preliminary study of the reaction mechanism suggests that the hydrobromination reaction involves hydrocupration of an alkyne, followed by the bromination of the alkenyl copper intermediate. This study also suggests that 2-tert-butyl potassium phenoxide functions as a mild catalyst turnover reagent and provides a better understanding of the unique effectiveness of (BrCl2C)2 among brominating reagents.

Asymmetric synthesis of trisubstituted allenes: copper-catalyzed alkylation and arylation of propargylic phosphates.

Asymmetric synthesis of trisubstituted allenes is accomplished by copper-catalyzed alkylation and arylation of propargylic phosphates using organoboron nucleophiles. Excellent chirality transfer and regioselectivity, together with good functional group compatibility, were observed in reactions with both alkyl boranes and arylboronic esters.