ABSTRACT
Supercapacitors have attracted great interest because of their fast, reversible operation and sustainability. However, their energy densities remain lower than those of batteries. In the last decade, supercapacitors with an energy content of â¼110 W h L-1 at a power of â¼1 kW L-1 were developed by leveraging the open framework structure of graphene-related architectures. Here, we report that the reaction of fluorographene with azide anions enables the preparation of a material combining graphene-type sp2 layers with tetrahedral carbon-carbon bonds and nitrogen (pyridinic and pyrrolic) superdoping (16%). Theoretical investigations showed that the C-C bonds develop between carbon-centered radicals, which emerge in the vicinity of the nitrogen dopants. This material, with diamond-like bonds and an ultra-high mass density of 2.8 g cm-3, is an excellent host for the ions, delivering unprecedented energy densities of 200 W h L-1 at a power of 2.6 kW L-1 and 143 W h L-1 at 52 kW L-1. These findings open a route to materials whose properties may enable a transformative improvement in the performance of supercapacitor components.
ABSTRACT
The Stoppani factory manufactured chromium for more than one century, dumping millions of tons of Chromite Ore Processing Residues (COPRs) over decades. The massive presence of COPRs resulted in an intense CrVI leaching and consequent contamination of percolating groundwater. The site offers a unique opportunity to follow COPRs evolution from the primary roasting process to the aged Cr-bearing mineral phases. Herein, new insights on COPRs mineralogy evolution and their role in CrVI release are provided by a dry sample preparation protocol, coupled with in-depth multi-technique characterization. Besides typical COPRs mineral assemblages, highly soluble Na2CrO4 and the first evidence of crocoite (PbCrO4) in a COPR contaminated site are revealed. Selective extraction experiments confirmed a strong reactivity for Cr-bearing minerals as confirmed by concentrations as high as 375 mg L-1 of leached CrVI. The mineralogical approach was combined with a nanotechnological solution for CrVI wastewater remediation. The application of naked colloidal maghemite (γ-Fe2O3) nanoparticles (SAMNs) on the complex industrial wastewater, led to > 90% CrVI removal, either under acidic or in-situ conditions. The present case study of a highly polluted site, ranging from mineral characterization to wastewater remediation, highlights the use of multidisciplinary approaches to cope with complex environmental issues.
Subject(s)
Groundwater , Industrial Waste , Chromium/analysis , Industrial Waste/analysis , MineralsABSTRACT
Polymeric one-dimensional (1D) triazole-based FeII spin crossover nanoparticles have been entrapped in pluronic P123 matrix, forming nanorods in which the interaction between host (P123) and guest (FeII complex) promoted high reproducibility of the spin crossover process, significant shifts of the transition temperatures (T↑=370â K, T↓=338â K for the P123 entrapped material vs the literature values of T↑=358â K, T↓=341â K for the neat/polymer free system) and larger magnetic hysteresis width.
ABSTRACT
Pristine ɣ-Fe2O3 nanoparticles, called surface active maghemite nanoparticles (SAMNs) display unprecedented colloidal stability and specific binding properties. Herein, the interactions of SAMNs with AsV and AsIII as surface molecular probes were comparatively studied. Thermodynamic and kinetic characterizations, along with chemical and structural analysis of SAMN@As complexes, evidenced two distinct binding modalities. Arsenite, emerged as an elective and specific ligand for SAMNs, whereas arsenate adsorption was more labile, pH dependent and ruled by different binding possibilities. In particular, AsIII oxyacid exclusively interacts through inner-sphere coordination occupying available surface crystal positions resembling a key-lock fitting, while AsV leads to both outer-sphere and inner-sphere complexes. Noteworthy, discrimination between AsV and AsIII was never reported for nanostructured maghemite evidencing the importance of synthetic route on surface properties of the nanomaterial. The present report, besides enriching the chemistry of nanosized iron oxides, suggests SAMNs application for the remediation of water contaminated by AsIII, the most threatening As species in water.
ABSTRACT
Flumequine was nano-immobilized by self-assembly on iron oxide nanoparticles, called surface active maghemite nanoparticles (SAMNs). The binding process was studied and the resulting core-shell nanocarrier (SAMN@FLU) was structurally characterized evidencing a firmly immobilized organic canopy on which the fluorine atom of the antibiotic was exposed to the solvent. The antibiotic efficacy of the SAMN@FLU nanocarrier was tested on a fish pathogenic bacterium (Aeromonas veronii), a flumequine sensitive strain, in comparison to soluble flumequine and the minimum inhibitory concentration (MIC) and the minimum bactericidal concentration (MBC) were assessed. Noteworthy, the MIC and MBC of soluble and nanoparticle bound drug were superimposable. Moreover, the interactions between SAMN@FLU nanocarrrier and microorganism were studied by transmission electron microscopy evidencing the ability of the complex to disrupt the bacterial wall. Finally, a preliminary in vivo test was provided using Daphnia magna as animal model. SAMN@FLU was able to protect the crustacean from the fatal consequences of a bacterial infection and showed no sign of toxicity. Thus, in contrast with the strength of the interaction, nano-immobilized FLU displayed a fully preserved antimicrobial activity suggesting the crucial role of fluorine in the drug mechanism of action. Besides the importance for potential applications in aquaculture, the present study contributes to the nascent field of nanoantibiotics.
Subject(s)
Aeromonas veronii/drug effects , Anti-Bacterial Agents/pharmacology , Daphnia/drug effects , Fluoroquinolones/pharmacology , Magnetite Nanoparticles/chemistry , Animals , Anti-Bacterial Agents/chemistry , Daphnia/microbiology , Fluoroquinolones/chemistry , Microbial Sensitivity Tests , Molecular StructureABSTRACT
Generally, enzyme immobilization on nanoparticles leads to nano-conjugates presenting partially preserved, or even absent, biological properties. Notwithstanding, recent research demonstrated that the coupling to nanomaterials can improve the activity of immobilized enzymes. Herein, xanthine oxidase (XO) was immobilized by self-assembly on peculiar naked iron oxide nanoparticles (surface active maghemite nanoparticles, SAMNs). The catalytic activity of the nanostructured conjugate (SAMN@XO) was assessed by optical spectroscopy and compared to the parent enzyme. SAMN@XO revealed improved catalytic features with respect to the parent enzyme and was applied for the electrochemical studies of xanthine. The present example supports the nascent knowledge concerning protein conjugation to nanoparticle as a means for the modulation of biological activity.
ABSTRACT
Terrestrial volcanism has been one of the dominant geological forces shaping our planet since its earliest existence. Its associated phenomena, like atmospheric lightning and hydrothermal activity, provide a rich energy reservoir for chemical syntheses. Based on our laboratory simulations, we propose that on the early Earth volcanic activity inevitably led to a remarkable production of formic acid through various independent reaction channels. Large-scale availability of atmospheric formic acid supports the idea of the high-temperature accumulation of formamide in this primordial environment.
ABSTRACT
A category of naked maghemite nanoparticles (γ-Fe2O3), named surface active maghemite nanoparticles (SAMNs), is characterized by biological safety, high water colloidal stability and a surface chemistry permitting the binding of ligands. In the present study, the interaction between SAMNs and an antibiotic displaying chelating properties (oxytetracycline, OxyTC) was extensively structurally and magnetically characterized. OxyTC emerged as an ideal probe for providing insights into the colloidal properties of SAMNs. At the same time, SAMNs turned out as an elective tool for water remediation from OxyTC. Therefore, a dilute colloidal suspension of SAMNs was used for the removal of OxyTC in large volume tanks where, to simulate a real in situ application, a population of zebrafish (Danio rerio) was introduced. Interestingly, SAMNs led to the complete removal of the drug without any sign of toxicity for the animal model. Moreover, OxyTC immobilized on SAMNs surface resulted safe for sensitive Escherichia coli bacteria strain. Thus, SAMNs were able to recover the drug and to suppress its antibiotic activity envisaging their feasibility as competitive option for water remediation from OxyTC in more nature related scenarios. The present contribution stimulates the use of novel smart colloidal materials to cope with complex environmental issues.
Subject(s)
Anti-Bacterial Agents/pharmacology , Escherichia coli/drug effects , Magnetite Nanoparticles/chemistry , Oxytetracycline/pharmacology , Suspensions/chemistry , Animals , Anti-Bacterial Agents/chemistry , Colloids/chemistry , Microbial Sensitivity Tests , Oxytetracycline/chemistry , Particle Size , Surface Properties , ZebrafishABSTRACT
Aedes aegypti mosquitos are widespread vectors of several diseases and their control is of primary importance for biological and environmental reasons, and novel safe insecticides are highly desirable. An eco-friendly photosensitizing magnetic nanocarrier with larvicidal effects on Aedes aegypti was proposed. The innovative core-shell hybrid nanomaterial was synthesized by combining peculiar magnetic nanoparticles (called Surface Active Maghemite Nanoparticles - SAMNs, the core) and chlorin-e6 as photosensitizer (constituting the shell) via self-assembly in water. The hybrid nanomaterial (SAMN@chlorin) was extensively characterized and tested for the photocidal activity on larvae of Aedes aegypti. The SAMN@chlorin core-shell nanohybrid did not present any toxic effect in the dark, but, upon light exposure, showed a higher photocidal activity than free chlorin-e6. Moreover, the eco-toxicity of SAMN@chlorin was determined in adults and neonates of Daphnia magna, where delayed toxicity was observed only after prolonged (≥4â¯h) exposure to intense light, on the green alga Pseudokirchneriella subcapitata and on the duckweed Lemna minor on which no adverse effects were observed. The high colloidal stability, the physico-chemical robustness and the magnetic drivability of the core-shell SAMN@chlorin nanohybrid, accompanied by the high photocidal activity on Aedes aegypti larvae and reduced environmental concerns, can be proposed as a safe alternative to conventional insecticides.
Subject(s)
Aedes , Ferric Compounds/chemistry , Insecticides/chemistry , Larva , Nanoparticles/chemistry , Porphyrins/chemistry , Animals , Chlorophyceae/drug effects , Chlorophyceae/radiation effects , Daphnia/drug effects , Daphnia/radiation effects , Insecticides/toxicity , Light , Porphyrins/toxicity , Surface Properties , Water/chemistryABSTRACT
The ability of peculiar iron oxide nanoparticles (IONPs) to evade the immune system was investigated in vivo. The nanomaterial was provided directly into the farming water of zebrafish ( Danio rerio) and the distribution of IONPs and the delivery of oxytetracycline (OTC) was studied evidencing the successful overcoming of the intestinal barrier and the specific and prolonged (28 days) organotropic delivery of OTC to the fish ovary. Noteworthy, no sign of adverse effects was observed. In fish blood, IONPs were able to specifically bind apolipoprotein A1 (Apo A1) and molecular modeling showed the structural analogy between the IONP@Apo A1 nanoconjugate and high-density lipoprotein (HDL). Thus, the preservation of the biological identity of the protein suggests a plausible explanation of the observed overcoming of the intestinal barrier, of the great biocompatibity of the nanomaterial, and of the prolonged drug delivery (benefiting of the lipoprotein transport route). The present study promises novel and unexpected stealth materials in nanomedicine.
Subject(s)
Drug Delivery Systems , Ferric Compounds/chemistry , Metal Nanoparticles/chemistry , Animals , Blood-Brain Barrier , Chromatography, High Pressure Liquid , Fishes , Mass Spectrometry , Protein BindingABSTRACT
Iron(II) phthalocyanine (FePc) is an important member of the phthalocyanines family with potential applications in the fields of electrocatalysis, magnetic switching, electrochemical sensing, and phototheranostics. Despite the importance of electronic properties of FePc in these applications, a reliable determination of its ground-state is still challenging. Here we present combined state of the art computational methods and experimental approaches, that is, Mössbauer spectroscopy and Superconducting Quantum Interference Device (SQUID) magnetic measurements to identify the ground state of FePc. While the nature of the ground state obtained with density functional theory (DFT) depends on the functional, giving mostly the triplet state, multi-reference complete active space second-order perturbation theory (CASPT2) and density matrix renormalization group (DMRG) methods assign quintet as the FePc ground-state in gas-phase. This has been confirmed by the hyperfine parameters obtained from 57 Feâ Mössbauer spectroscopy performed in frozen monochlorobenzene. The use of monochlorobenzene guarantees an isolated nature of the FePc as indicated by a zero Weiss temperature. The results open doors for exploring the ground state of other metal porphyrin molecules and their controlled spin transitions via external stimuli.
ABSTRACT
Graphene, a single two-dimensional sheet of carbon atoms with an arrangement mimicking the honeycomb hexagonal architecture, has captured immense interest of the scientific community since its isolation in 2004. Besides its extraordinarily high electrical conductivity and surface area, graphene shows a long spin lifetime and limited hyperfine interactions, which favors its potential exploitation in spintronic and biomedical applications, provided it can be made magnetic. However, pristine graphene is diamagnetic in nature due to solely sp2 hybridization. Thus, various attempts have been proposed to imprint magnetic features into graphene. The present review focuses on a systematic classification and physicochemical description of approaches leading to equip graphene with magnetic properties. These include introduction of point and line defects into graphene lattices, spatial confinement and edge engineering, doping of graphene lattice with foreign atoms, and sp3 functionalization. Each magnetism-imprinting strategy is discussed in detail including identification of roles of various internal and external parameters in the induced magnetic regimes, with assessment of their robustness. Moreover, emergence of magnetism in graphene analogues and related 2D materials such as transition metal dichalcogenides, metal halides, metal dinitrides, MXenes, hexagonal boron nitride, and other organic compounds is also reviewed. Since the magnetic features of graphene can be readily masked by the presence of magnetic residues from synthesis itself or sample handling, the issue of magnetic impurities and correct data interpretations is also addressed. Finally, current problems and challenges in magnetism of graphene and related 2D materials and future potential applications are also highlighted.
ABSTRACT
Preparation of graphene derivatives using fluorographene (FG) as a precursor has become a key strategy for the large-scale synthesis of new 2-D materials (e.g. graphene acid, cyanographene, allyl-graphene) with tailored physicochemical properties. However, to gain full control over the derivatization process, it is essential to understand the reaction mechanisms and accompanying processes that affect the composition and structure of the final products. Despite the strength of C-F bonds and high chemical stability of perfluorinated hydrocarbons, FG is surprisingly susceptible to reactions under ambient conditions. There is clear evidence that nucleophilic substitution on FG is accompanied by spontaneous defluorination, and solvent-induced defluorination can occur even in the absence of any nucleophilic agent. Here, we show that distributed radical centers (fluorine vacancies) on the FG surface need to be taken into account in order to rationalize the defluorination mechanism. Depending on the environment, these radical centers can react as electron acceptors, electrophilic sites and/or cause homolytic bond cleavages. We also propose a new radical mechanism of FG defluorination in the presence of N,N'-dimethylformamide (DMF) solvent. Spin-trap experiments as well as 19F NMR measurements unambiguously confirmed formation of N,N'-dimethylformyl radicals and also showed that N,N'-dimethylcarbamoyl fluoride plays a key role in the proposed mechanism. These findings imply that point defects in 2D materials should be considered as key factor determining their chemical properties and reactivity.
ABSTRACT
Materials based on metallic elements that have d orbitals and exhibit room temperature magnetism have been known for centuries and applied in a huge range of technologies. Development of room temperature carbon magnets containing exclusively sp orbitals is viewed as great challenge in chemistry, physics, spintronics and materials science. Here we describe a series of room temperature organic magnets prepared by a simple and controllable route based on the substitution of fluorine atoms in fluorographene with hydroxyl groups. Depending on the chemical composition (an F/OH ratio) and sp3 coverage, these new graphene derivatives show room temperature antiferromagnetic ordering, which has never been observed for any sp-based materials. Such 2D magnets undergo a transition to a ferromagnetic state at low temperatures, showing an extraordinarily high magnetic moment. The developed theoretical model addresses the origin of the room temperature magnetism in terms of sp2-conjugated diradical motifs embedded in an sp3 matrix and superexchange interactions via -OH functionalization.
ABSTRACT
Anodic oxidation of [CB11H12]- and 18 of its halogenated and/or methylated derivatives was examined. Reversible oxidation was found for four of the anions in liquid SO2 and for four more in 1,1,1,3,3,3-hexafluoroisopropyl alcohol. The oxidation occurred at â¼1 V (for [CB11Me12]-) up to more than 4 V (for [1-H-(2-6)-F5-(7-12)-(CF3)6-CB11]-) relative to ferrocene/ferricinium. The anodic peak potentials are reproduced by a set of additive position-sensitive substituent increments.
ABSTRACT
Bis(alkynyl)silanes (1a,b) react with bis(pentafluorophenyl)-borane to 3-boryl-2,5-bis(trimethylsilyl) substituted siloles 3a,b. Subsequent irradiation of 3 with Pyrex filtered UV light resulted in the complete conversion to the new 5-boryl-2,3-bis(trimethylsilyl) substituted siloles 4a,b.
ABSTRACT
Nitrile insertion into a zirconacycloallenoid complex leads to the formation of a seven-membered ring product with an attached boratirane unit.
ABSTRACT
Treatment of the bis-acetylide zirconocene complexes (RCp)2Zr(C[symbol: see text]C-SiMe3)2 (8a, R = CH3; 8b, R = tert-butyl) with HB(C6F5)2 results in the formation of the five-membered organometallic zirconacycloallenoid products (9a, 9b). Both were characterized by X-ray diffraction, and the special bonding features of 9a were studied by DFT calculation. The overall reaction was followed by NMR experiments at variable temperature. Starting from 8a the reaction proceeds by alkynyl abstraction to give a zwitterionic [(MeCp)2ZrC[symbol: see text]C-SiMe3]+[eta-ArF2B(H)C[symbol: see text]C-SiMe3]- intermediate (12a), single crystals of which were obtained at -30 degreesC for characterization by X-ray diffraction, followed by a 1,1-hydroboration/sigma-ligand coupling sequence to give the new five-membered zirconacycloallenoid product 9a.