Negative Charge-Carrying Glycans Attached to Exosomes as Novel Liquid Biopsy Marker.

Prostate cancer (PCa) is the second most common cancer. In this paper, the isolation and properties of exosomes as potential novel liquid biopsy markers for early PCa liquid biopsy diagnosis are investigated using two prostate human cell lines, i.e., benign (control) cell line RWPE1 and carcinoma cell line 22Rv1. Exosomes produced by both cell lines are characterised by various methods including nanoparticle-tracking analysis, dynamic light scattering, scanning electron microscopy and atomic force microscopy. In addition, surface plasmon resonance (SPR) is used to study three different receptors on the exosomal surface (CD63, CD81 and prostate-specific membrane antigen-PMSA), implementing monoclonal antibodies and identifying the type of glycans present on the surface of exosomes using lectins (glycan-recognising proteins). Electrochemical analysis is used to understand the interfacial properties of exosomes. The results indicate that cancerous exosomes are smaller, are produced at higher concentrations, and exhibit more nega tive zeta potential than the control exosomes. The SPR experiments confirm that negatively charged α-2,3- and α-2,6-sialic acid-containing glycans are found in greater abundance on carcinoma exosomes, whereas bisecting and branched glycans are more abundant in the control exosomes. The SPR results also show that a sandwich antibody/exosomes/lectins configuration could be constructed for effective glycoprofiling of exosomes as a novel liquid biopsy marker.

Correlative atomic force microscopy and scanning electron microscopy of bacteria-diamond-metal nanocomposites.

Research investigating the interface between biological organisms and nanomaterials nowadays requires multi-faceted microscopic methods to elucidate the interaction mechanisms and effects. Here we describe a novel approach and methodology correlating data from an atomic force microscope inside a scanning electron microscope (AFM-in-SEM). This approach is demonstrated on bacteria-diamond-metal nanocomposite samples relevant in current life science research. We describe a procedure for preparing such multi-component test samples containing E. coli bacteria and chitosan-coated hydrogenated nanodiamonds decorated with silver nanoparticles on a carbon-coated gold grid. Microscopic topography information (AFM) is combined with chemical, material, and morphological information (SEM using SE and BSE at varied acceleration voltages) from the same region of interest and processed to create 3D correlative probe-electron microscopy (CPEM) images. We also establish a novel 3D RGB color image algorithm for merging multiple SE/BSE data from SEM with the AFM surface topography data which provides additional information about microscopic interaction of the diamond-metal nanocomposite with bacteria, not achievable by individual analyses. The methodology of CPEM data interpretation is independently corroborated by further in-situ (EDS) and ex-situ (micro-Raman) chemical characterization as well as by force volume AFM analysis. We also discuss the broader applicability and benefits of the methodology for life science research.

Non-contact non-resonant atomic force microscopy method for measurements of highly mobile molecules and nanoparticles.

Atomic force microscopy (AFM) is nowadays indispensable versatile scanning probe method widely employed for fundamental and applied research in physics, chemistry, biology as well as industrial metrology. Conventional AFM systems can operate in various environments such as ultra-high vacuum, electrolyte solutions, or controlled gas atmosphere. Measurements in ambient air are prevalent due to their technical simplicity; however, there are drawbacks such as formation of water meniscus that greatly increases attractive interaction (adhesion) between the tip and the sample, reduced spatial resolution, and too strong interactions leading to tip and/or sample modifications. Here we show how the attractive forces in AFM under ambient conditions can be used with advantage to probe surface properties in a very sensitive way even on highly mobile molecules and nanoparticles. We introduce a stable non-contact non-resonant (NCNR) AFM method which enables to reliably perform measurements in the attractive force regime even in air by controlling the tip position in the intimate surface vicinity without touching it. We demonstrate proof-of-concept results on helicene-based macrocycles, DNA on mica, and nanodiamonds on SiO2. We compare the results with other conventional AFM regimes, showing NCNR advantages such as higher spatial resolution, reduced tip contamination, and negligible sample modification. We analyze principle physical and chemical mechanisms influencing the measurements, discuss issues of stability and various possible method implementations. We explain how the NCNR method can be applied in any AFM system by a mere software modification. The method thus opens a new research field for measurements of highly sensitive and mobile nanoscale objects under air and other environments.

Polarization Controlled Assembly of Ultrathin Thiorphan Nanostructures on ZnO Surface Facets.

Despite the importance of thiorphan as a small molecule with vital biological roles, its interactions with zinc oxide (ZnO) nanomaterials that are prospective in drug delivery and theranostic applications have not yet been sufficiently explored. Here the impact of surface polarity of different ZnO facets on thiorphan adsorption is studied both experimentally by atomic force microscopy (AFM) and angle resolved X-ray photoelectron spectroscopy (XPS) and theoretically by force field molecular dynamics (FFMD) and density functional tight binding simulations (DFTB). Polar ZnO surfaces cause the formation of thiorphan nanodots, where the size of the nanodots depends on the direction of dipoles: small (4 nm) nanodots are formed on Zn-face ZnO, while large (25 nm) nanodots are formed on O-face ZnO. Nonpolar ZnO surfaces cause self-assembly into layered nanoislands with characteristic 4 nm layer thickness, which subsequently merge into rigid nanolayers. The self-assembly is shown to be controlled solely by the effect of surface dipole electric field orientation and magnitude, whereas effects of surface chemistry or solution are negligible. The results thus also show a way for controlling the assembly of thiorphan and other molecular nanomaterials for diverse applications.

Helicene-based π-conjugated macrocycles: their synthesis, properties, chirality and self-assembly into molecular stripes on a graphite surface.

Fully aromatic helicenes are attractive building blocks for the construction of inherently chiral π-conjugated macrocyclic nanocarbons. These hitherto rare molecular architectures are envisaged to exhibit remarkable (chir)optical properties, self-assembly, charge/spin transport, induced ring current or a fascinating Möbius topology. Here the synthesis of helically chiral macrocycles that combine angular dibenzo[5]helicene units as corners and linear trans-stilbene-4,4'-diyl linkers as edges is reported. By subjecting a racemic or enantiopure divinyl derivative of dibenzo[5]helicene to olefin metathesis, which was catalysed by a 2nd generation Piers catalyst under kinetic control, a π-conjugated helicene cyclic trimer (33%) and a tetramer (22%) were obtained, which were separated by GPC. Combining racemic/asymmetric synthesis with the resolution of enantiomers/diastereomers by SFC/HPLC on a chiral column, both homochiral (+)-(M,M,M)/(-)-(P,P,P) and heterochiral (+)-(M,M,P)/(-)-(M,P,P) stereoisomers of the helicene cyclic trimer could be obtained in an enantio- and diastereomerically enriched form. The complete energy profile of their interconversion was compiled on the basis of kinetic measurements and numerical solution of the proposed kinetic model. In equilibrium, the heterochiral diastereomer predominates over the homochiral one (ca. 75 : 25 at 76 °C). π-Conjugation along a large, twisted circuit in the helicene cyclic trimer is rather disrupted, stabilising this formally antiaromatic molecule. Using an optimised PeakForce mode of ambient AFM, the self-assembly of otherwise highly mobile stereoisomers of the helicene cyclic trimer on the HOPG surface could be studied. Irrespective of the stereochemistry, strong preferences for the edge-to-edge interaction of these macrocycles were found to form very long parallel 1D molecular stripes in ordered 2D nanocrystals, a result also supported by molecular dynamics simulations. Six trityl groups, initially introduced to the macrocycle to enhance solubility, serve as a key "molecular Velcro" system in the self-assembly of macrocycles to maximise their mutual van der Waals interactions.

RADIATION DAMAGE TO DNA PLASMIDS IN THE PRESENCE OF BOROCAPTATES.

Boron derivatives have great potential in cancer diagnostics and treatment. Borocaptates are used in boron neutron capture therapy and potentially in proton boron fusion therapy. This work examines modulation effects of two borocaptate compounds on radiation-induced DNA damage. Aqueous solutions of pBR322 plasmid containing increasing concentrations of borocaptates were irradiated with 60Co gamma rays or 30 MeV protons. Induction of single and double DNA strand breaks was investigated using agarose gel electrophoresis. In this model system, representing DNA without the intervention of cellular repair mechanisms, the boron derivatives acted as antioxidants. Clinically relevant boron concentrations of 40 ppm reduced the DNA single strand breakage seven-fold. Possible mechanisms of the observed effect are discussed.

Coating Ti6Al4V implants with nanocrystalline diamond functionalized with BMP-7 promotes extracellular matrix mineralization in vitro and faster osseointegration in vivo.

The present study investigates the effect of an oxidized nanocrystalline diamond (O-NCD) coating functionalized with bone morphogenetic protein 7 (BMP-7) on human osteoblast maturation and extracellular matrix mineralization in vitro and on new bone formation in vivo. The chemical structure and the morphology of the NCD coating and the adhesion, thickness and morphology of the superimposed BMP-7 layer have also been assessed. The material analysis proved synthesis of a conformal diamond coating with a fine nanostructured morphology on the Ti6Al4V samples. The homogeneous nanostructured layer of BMP-7 on the NCD coating created by a physisorption method was confirmed by AFM. The osteogenic maturation of hFOB 1.19 cells in vitro was only slightly enhanced by the O-NCD coating alone without any increase in the mineralization of the matrix. Functionalization of the coating with BMP-7 resulted in more pronounced cell osteogenic maturation and increased extracellular matrix mineralization. Similar results were obtained in vivo from micro-CT and histological analyses of rabbit distal femurs with screws implanted for 4 or 12 weeks. While the O-NCD-coated implants alone promoted greater thickness of newly-formed bone in direct contact with the implant surface than the bare material, a further increase was induced by BMP-7. It can be therefore concluded that O-NCD coating functionalized with BMP-7 is a promising surface modification of metallic bone implants in order to improve their osseointegration.

Strong Structural and Electronic Binding of Bovine Serum Albumin to ZnO via Specific Amino Acid Residues and Zinc Atoms.

ZnO biointerfaces with serum albumin have attracted noticeable attention due to the increasing interest in developing ZnO-based materials for biomedical applications. ZnO surface morphology and chemistry are expected to play a critical role on the structural, optical, and electronic properties of albumin-ZnO complexes. Yet there are still large gaps in the understanding of these biological interfaces. Herein we comprehensively elucidate the interactions at such interfaces by using atomic force microscopy and nanoshaving experiments to determine roughness, thickness, and adhesion properties of BSA layers adsorbed on the most typical polar and non-polar ZnO single-crystal facets. These experiments are corroborated by force field (FF) and density-functional tight-binding (DFTB) calculations on ZnO-BSA interfaces. We show that BSA adsorbs on all the studied ZnO surfaces while interactions of BSA with ZnO are found to be considerably affected by the atomic surface structure of ZnO. BSA layers on the (0001‾) surface have the highest roughness and thickness, hinting at a specific upright BSA arrangement. BSA layers on (101‾0) surface have the strongest binding, which is well correlated with DFTB simulations showing atomic rearrangement and bonding between specific amino acids (AAs) and ZnO. Besides the structural properties, the ZnO interaction with these AAs also controls the charge transfer and HOMO-LUMO energy positions in the BSA-ZnO complexes. This ZnO facet-specific protein binding and related structural and electronic effects can be useful for improving the design and functionality of ZnO-based materials and devices.

Infrared Absorption Spectroscopy of Albumin Binding with Amine-Containing Plasma Polymer Coatings on Nanoporous Diamond Surfaces.

Nanocrystalline diamond (NCD) layers functionalized with amine-containing functional groups have generated considerable interest as biocompatible substrates for attachment of biomolecules and cells with a view to biosensor and tissue engineering applications. Here we prepare nanoporous diamond layers with the surfaces modified by hydrogen plasma, oxygen plasma, and conformal 7 nm amine-containing plasma polymer (PP). Immobilization of bovine serum albumin (BSA) molecules is characterized on such surfaces. Grazing angle reflectance infrared spectroscopy as well as X-ray photoelectron spectroscopy show that concentration of amine-containing bonds after BSA exposure depends on the type of NCD surface modification. AFM measurements reveal that BSA proteins are physisorbed on H- and O-terminated diamond surfaces in different thicknesses and morphology. When the diamond layers are coated with the amine-containing PP, BSA molecules assume similar thickness and morphology, and their adhesion is significantly increased on both types of the diamond surfaces.

HOW DETECTION OF PLASMID DNA FRAGMENTATION AFFECTS RADIATION STRAND BREAK YIELDS.

A compromised detection of radiation-induced plasmid DNA fragments results in underestimation of calculated damage yields. Electrophoretic methods are easy and cheap, but they can only detect a part of the fragments, neglecting the shortest ones. These can be detected with atomic force microscopy, but at the expense of time and price. Both methods were used to investigate their capabilities to detect the DNA fragments induced by high-energetic heavy ions. The results were taken into account in calculations of radiation-induced yields of single and double strand breaks. It was estimated that the double strand break yield is twice as high when the fragments are at least partially detected with the agarose electrophoresis, compared to when they were completely omitted. Further increase by 13% was observed when the measured fragments were corrected for the fraction of the shortest fragments up to 300 base pairs, as detected with the atomic force microscopy. The effect of fragment detection on the single strand break yield was diminished.

Diamond nanoparticles suppress lateral growth of bacterial colonies.

Diamond nanoparticles (DNPs) of various types have been recently reported to possess antibacterial properties. Studies have shown a decrease of the colony forming ability on agar plates of the bacteria that had been previously co-incubated with DNPs in the suspension. Before plating, bacteria with DNPs were adequately diluted in order to obtain a suitable number of colony forming units. However, residual DNPs were still present on an agar plate, concentrated on the surface during the plating process; this introduces a potential artifact which might affect colony growth. The effect of DNPs remaining on the surface, alongside growing bacteria, has not been previously investigated. In this work, we present the experiments designed to investigate the effect of DNPs on bacterial survival and on the growth of the bacterial colony on a solid media. We employed Escherichia coli and Bacillus subtilis as models of Gram-negative and Gram-positive bacteria, respectively, and Proteus mirabilis as a model of bacterium exhibiting swarming motility on the surfaces. We analyzed the number, area, and weight of bacterial colonies grown on the agar surface covered with DNPs. We did not observe any bactericidal effect of such applied DNPs. However, in all bacterial species used in this work, we observed the appreciable reduction of colony area, which suggests that DNPs obstruct either bacterial growth or motility. The most obvious effect on colony growth was observed in the case of motile P. mirabilis. We show that DNPs act as the mechanical barrier blocking the lateral colony growth.

Dose-Rate Effects in Breaking DNA Strands by Short Pulses of Extreme Ultraviolet Radiation.

In this study, we examined dose-rate effects on strand break formation in plasmid DNA induced by pulsed extreme ultraviolet (XUV) radiation. Dose delivered to the target molecule was controlled by attenuating the incident photon flux using aluminum filters as well as by changing the DNA/buffer-salt ratio in the irradiated sample. Irradiated samples were examined using agarose gel electrophoresis. Yields of single- and double-strand breaks (SSBs and DSBs) were determined as a function of the incident photon fluence. In addition, electrophoresis also revealed DNA cross-linking. Damaged DNA was inspected by means of atomic force microscopy (AFM). Both SSB and DSB yields decreased with dose rate increase. Quantum yields of SSBs at the highest photon fluence were comparable to yields of DSBs found after synchrotron irradiation. The average SSB/DSB ratio decreased only slightly at elevated dose rates. In conclusion, complex and/or clustered damages other than cross-links do not appear to be induced under the radiation conditions applied in this study.

Length computation of irradiated plasmid DNA molecules.

Compromised detection of short DNA fragments can result in underestimation of radiation-induced clustered DNA damage. The fragments can be detected with atomic force microscopy (AFM), followed by image analysis to compute the length of plasmid molecules. Plasmid molecules imaged with AFM are represented by open or closed curves, possibly with crossings. For the analysis of such objects, a dedicated algorithm was developed, and its usability was demonstrated on the AFM images of plasmid pBR322 irradiated with 60Co gamma rays. The analysis of the set of the acquired AFM images revealed the presence of DNA fragments with lengths shorter than 300 base pairs that would have been neglected by a conventional detection method.

Osteoblast adhesion, migration, and proliferation variations on chemically patterned nanocrystalline diamond films evaluated by live-cell imaging.

Cell fate modulation by adapting the surface of a biocompatible material is nowadays a challenge in implantology, tissue engineering as well as in construction of biosensors. Nanocrystalline diamond (NCD) thin films are considered promising in these fields due to their extraordinary physical and chemical properties and diverse ways in which they can be modified structurally and chemically. The initial cell distribution, the rate of cell adhesion, distance of cell migration and also the cell proliferation are influenced by the NCD surface termination. Here, we use real-time live-cell imaging to investigate the above-mentioned processes on oxidized NCD (NCD-O) and hydrogenated NCD (NCD-H) to elucidate cell preference to the NCD-O especially on surfaces with microscopic surface termination patterns. Cells adhere more slowly and migrate farther on NCD-H than on NCD-O. Cells seeded with a fetal bovine serum (FBS) supplement in the medium move across the surface prior to adhesion. In the absence of FBS, the cells adhere immediately, but still exhibit different migration and proliferation on NCD-O/H regions. We discuss the impact of these effects on the formation of cell arrays on micropatterned NCD. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 1469-1478, 2017.

Nanocarbon Allotropes-Graphene and Nanocrystalline Diamond-Promote Cell Proliferation.

Two profoundly different carbon allotropes - nanocrystalline diamond and graphene - are of considerable interest from the viewpoint of a wide range of biomedical applications including implant coating, drug and gene delivery, cancer therapy, and biosensing. Osteoblast adhesion and proliferation on nanocrystalline diamond and graphene are compared under various conditions such as differences in wettability, topography, and the presence or absence of protein interlayers between cells and the substrate. The materials are characterized in detail by means of scanning electron microscopy, atomic force microscopy, photoelectron spectroscopy, Raman spectroscopy, and contact angle measurements. In vitro experiments have revealed a significantly higher degree of cell proliferation on graphene than on nanocrystalline diamond and a tissue culture polystyrene control material. Proliferation is promoted, in particular, by hydrophobic graphene with a large number of nanoscale wrinkles independent of the presence of a protein interlayer, i.e., substrate fouling is not a problematic issue in this respect. Nanowrinkled hydrophobic graphene, thus, exhibits superior characteristics for those biomedical applications where high cell proliferation is required under differing conditions.

Stochastic model explains formation of cell arrays on H/O-diamond patterns.

Cell migration plays an important role in many biological systems. A relatively simple stochastic model is developed and used to describe cell behavior on chemically patterned substrates. The model is based on three parameters: the speed of cell movement (own and external), the probability of cell adhesion, and the probability of cell division on the substrate. The model is calibrated and validated by experimental data obtained on hydrogen- and oxygen-terminated patterns on diamond. Thereby, the simulations reveal that: (1) the difference in the cell movement speed on these surfaces (about 1.5×) is the key factor behind the formation of cell arrays on the patterns, (2) this difference is provided by the presence of fetal bovine serum (validated by experiments), and (3) the directional cell flow promotes the array formation. The model also predicts that the array formation requires mean distance of cell travel at least 10% of intended stripe width. The model is generally applicable for biosensors using diverse cells, materials, and structures.

Epithelial cell morphology and adhesion on diamond films deposited and chemically modified by plasma processes.

The authors show that nanocrystalline diamond (NCD) thin films prepared by microwave plasma enhanced chemical vapor deposition apparatus with a linear antenna delivery system are well compatible with epithelial cells (5637 human bladder carcinoma) and significantly improve the cell adhesion compared to reference glass substrates. This is attributed to better adhesion of adsorbed layers to diamond as observed by atomic force microscopy (AFM) beneath the cells. Moreover, the cell morphology can be adjusted by appropriate surface treatment of diamond by using hydrogen and oxygen plasma. Cell bodies, cytoplasmic rims, and filopodia were characterized by Peakforce AFM. Oxidized NCD films perform better than other substrates under all conditions (96% of cells adhered well). A thin adsorbed layer formed from culture medium and supplemented with fetal bovine serum (FBS) covered the diamond surface and played an important role in the cell adhesion. Nevertheless, 50-100 nm large aggregates formed from the RPMI medium without FBS facilitated cell adhesion also on hydrophobic hydrogenated NCD (increase from 23% to 61%). The authors discuss applicability for biomedical uses.

Nanostructured diamond layers enhance the infrared spectroscopy of biomolecules.

We report on the fabrication and practical use of high-quality optical elements based on Au mirrors coated with diamond layers with flat, nanocolumnar, and nanoporous morphologies. Diamond layers (100 nm thickness) are grown at low temperatures (about 300 °C) from a methane, carbon dioxide, and hydrogen gas mixture by a pulsed microwave plasma system with linear antennas. Using grazing angle reflectance (GAR) Fourier transform infrared spectroscopy with p-polarized light, we compare the IR spectra of fetal bovine serum proteins adsorbed on diamond layers with oxidized (hydrophilic) surfaces. We show that the nanoporous diamond layers provide IR spectra with a signal gain of about 600% and a significantly improved sensitivity limit. This is attributed to its enhanced internal surface area. The improved sensitivity enabled us to distinguish weak infrared absorption peaks of <10-nm-thick protein layers and thereby to analyze the intimate diamond-molecule interface.

bOptimizing atomic force microscopy for characterization of diamond-protein interfaces.

Atomic force microscopy (AFM) in contact mode and tapping mode is employed for high resolution studies of soft organic molecules (fetal bovine serum proteins) on hard inorganic diamond substrates in solution and air. Various effects in morphology and phase measurements related to the cantilever spring constant, amplitude of tip oscillations, surface approach, tip shape and condition are demonstrated and discussed based on the proposed schematic models. We show that both diamond and proteins can be mechanically modified by Si AFM cantilever. We propose how to choose suitable cantilever type, optimize scanning parameters, recognize and minimize various artifacts, and obtain reliable AFM data both in solution and in air to reveal microscopic characteristics of protein-diamond interfaces. We also suggest that monocrystalline diamond is well defined substrate that can be applicable for fundamental studies of molecules on surfaces in general.

Micro-pattern guided adhesion of osteoblasts on diamond surfaces.

Microscopic chemical patterning of diamond surfaces by hydrogen and oxygen surface atoms is used for self-assembly of human osteoblastic cells into micro-arrays. The cell adhesion and assembly is further controlled by concentration of cells (2,500-10,000 cells/cm(2)) and fetal bovine serum (0-15%). The cells are characterized by fluorescence microscopy of actin fibers and nuclei. The serum protein adsorption is studied by atomic force microscopy (AFM). The cells are arranged selectively on O-terminated patterns into 30-200 µm wide arrays. Higher cell concentrations allow colonization of unfavorable H-terminated regions due to mutual cell communication. There is no cell selectivity without the proteins in the medium. Based on the AFM, the proteins are present on both H- and O-terminated surfaces. Pronounced differences in their thickness, surface roughness, morphology, and phase images indicate different conformation of the proteins and explain the cell selectivity.