Cooperative Carbon Dioxide Capture in Diamine-Appended Magnesium-Olsalazine Frameworks.

Diamine-appended Mg2(dobpdc) (dobpdc4- = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate) metal-organic frameworks have emerged as promising candidates for carbon capture owing to their exceptional CO2 selectivities, high separation capacities, and step-shaped adsorption profiles, which arise from a unique cooperative adsorption mechanism resulting in the formation of ammonium carbamate chains. Materials appended with primary,secondary-diamines featuring bulky substituents, in particular, exhibit excellent stabilities and CO2 adsorption properties. However, these frameworks display double-step adsorption behavior arising from steric repulsion between ammonium carbamates, which ultimately results in increased regeneration energies. Herein, we report frameworks of the type diamine-Mg2(olz) (olz4- = (E)-5,5'-(diazene-1,2-diyl)bis(2-oxidobenzoate)) that feature diverse diamines with bulky substituents and display desirable single-step CO2 adsorption across a wide range of pressures and temperatures. Analysis of CO2 adsorption data reveals that the basicity of the pore-dwelling amine─in addition to its steric bulk─is an important factor influencing adsorption step pressure; furthermore, the amine steric bulk is found to be inversely correlated with the degree of cooperativity in CO2 uptake. One material, ee-2-Mg2(olz) (ee-2 = N,N-diethylethylenediamine), adsorbs >90% of the CO2 from a simulated coal flue stream and exhibits exceptional thermal and oxidative stability over the course of extensive adsorption/desorption cycling, placing it among top-performing adsorbents to date for CO2 capture from a coal flue gas. Spectroscopic characterization and van der Waals-corrected density functional theory calculations indicate that diamine-Mg2(olz) materials capture CO2 via the formation of ammonium carbamate chains. These results point more broadly to the opportunity for fundamentally advancing materials in this class through judicious design.

Microporous organic nanotube assisted design of high performance nanofiltration membranes.

Microporous organic nanotubes (MONs) hold considerable promise for designing molecular-sieving membranes because of their high microporosity, customizable chemical functionalities, and favorable polymer affinity. Herein, we report the use of MONs derived from covalent organic frameworks to engineer 15-nm-thick microporous membranes via interfacial polymerization (IP). The incorporation of a highly porous and interpenetrated MON layer on the membrane before the IP reaction leads to the formation of polyamide membranes with Turing structure, enhanced microporosity, and reduced thickness. The MON-modified membranes achieve a remarkable water permeability of 41.7 L m-2 h-1 bar-1 and high retention of boron (78.0%) and phosphorus (96.8%) at alkaline conditions (pH 10), surpassing those of reported nanofiltration membranes. Molecular simulations reveal that introducing the MONs not only reduces the amine molecule diffusion toward the organic phase boundary but also increases membrane porosity and the density of water molecules around the membrane pores. This MON-regulated IP strategy provides guidelines for creating high-permeability membranes for precise nanofiltration.

Ion-capture electrodialysis using multifunctional adsorptive membranes.

Technologies that can efficiently purify nontraditional water sources are needed to meet rising global demand for clean water. Water treatment plants typically require a series of costly separation units to achieve desalination and the removal of toxic trace contaminants such as heavy metals and boron. We report a series of robust, selective, and tunable adsorptive membranes that feature porous aromatic framework nanoparticles embedded within ion exchange polymers and demonstrate their use in an efficient, one-step separation strategy termed ion-capture electrodialysis. This process uses electrodialysis configurations with adsorptive membranes to simultaneously desalinate complex water sources and capture diverse target solutes with negligible capture of competing ions. Our methods are applicable to the development of efficient and selective multifunctional separations that use adsorptive membranes.

Ruthenium-Catalyzed, Chemoselective and Regioselective Oxidation of Polyisobutene.

Polyolefins are important commodity plastics, yet their lack of functional groups limits their applications. The functionalization of C-H bonds holds promise for incorporating functionalities into polymers of ethylene and linear α-olefins. However, the selective functionalization of polyolefins derived from branched alkenes, even monobranched, 1,1-substituted alkenes, has not been achieved. These polymers are less reactive, due to steric effects, and they are prone to chain scission that degrades the polymer. We report the chemoselective and regioselective oxidation of a commercially important polymer of a branched olefin, polyisobutene. A polyfluorinated ruthenium-porphyrin catalyst incorporates ketone units into polyisobutene at methylene positions without chain cleavage. The oxidized polymer is thermally stable, yet it undergoes programmed reactions and possesses enhanced wetting properties.

Fluoroarene Separations in Metal-Organic Frameworks with Two Proximal Mg2+ Coordination Sites.

Fluoroarenes are widely used in medicinal, agricultural, and materials chemistry, and yet their production remains a critical challenge in organic synthesis. Indeed, the nearly identical physical properties of these vital building blocks hinders their purification by traditional methods, such as flash chromatography or distillation. As a result, the Balz-Schiemann reaction is currently employed to prepare fluoroarenes instead of more atom-economical C-H fluorination reactions, which produce inseparable mixtures of regioisomers. Herein, we propose an alternative solution to this problem: the purification of mixtures of fluoroarenes using metal-organic frameworks (MOFs). Specifically, we demonstrate that controlling the interaction of fluoroarenes with adjacent coordinatively unsaturated Mg2+ centers within a MOF enables the separation of fluoroarene mixtures with unparalleled selectivities. Liquid-phase multicomponent equilibrium adsorption data and breakthrough measurements coupled with van der Waals-corrected density functional theory calculations reveal that the materials Mg2(dobdc) (dobdc4- = 2,5-dioxidobenzene-1,4-dicarboxylate) and Mg2(m-dobdc) (m-dobdc4- = 2,4-dioxidobenzene-1,5-dicarboxylate) are capable of separating the difluorobenzene isomers from one another. Additionally, these frameworks facilitate the separations of fluoroanisoles, fluorotoluenes, and fluorochlorobenzenes. In addition to enabling currently unfeasible separations for the production of fluoroarenes, our results suggest that carefully controlling the interaction of isomers with not one but two strong binding sites within a MOF provides a general strategy for achieving challenging liquid-phase separations.

Iron detection and remediation with a functionalized porous polymer applied to environmental water samples.

Iron is one of the most abundant elements in the environment and in the human body. As an essential nutrient, iron homeostasis is tightly regulated, and iron dysregulation is implicated in numerous pathologies, including neuro-degenerative diseases, atherosclerosis, and diabetes. Endogenous iron pool concentrations are directly linked to iron ion uptake from environmental sources such as drinking water, providing motivation for developing new technologies for assessing iron(ii) and iron(iii) levels in water. However, conventional methods for measuring aqueous iron pools remain laborious and costly and often require sophisticated equipment and/or additional processing steps to remove the iron ions from the original environmental source. We now report a simplified and accurate chemical platform for capturing and quantifying the iron present in aqueous samples through use of a post-synthetically modified porous aromatic framework (PAF). The ether/thioether-functionalized network polymer, PAF-1-ET, exhibits high selectivity for the uptake of iron(ii) and iron(iii) over other physiologically and environmentally relevant metal ions. Mössbauer spectroscopy, XANES, and EXAFS measurements provide evidence to support iron(iii) coordination to oxygen-based ligands within the material. The polymer is further successfully employed to adsorb and remove iron ions from groundwater, including field sources in West Bengal, India. Combined with an 8-hydroxyquinoline colorimetric indicator, PAF-1-ET enables the simple and direct determination of the iron(ii) and iron(iii) ion concentrations in these samples, providing a starting point for the design and use of molecularly-functionalized porous materials for potential dual detection and remediation applications.

A rapid deposition of polydopamine coatings induced by iron (III) chloride/hydrogen peroxide for loose nanofiltration.

Mussel-inspired polydopamine (PDA) coatings have received widespread concern due to the advantages of eco-friendliness, adhesion nature, and film-forming feasibility. However, self-polymerization of dopamine assisted by air-oxidation under alkaline condition is time-consuming, and the ensuing uneven PDA coatings restrict their applications. In this study, we proposed a rapid PDA deposition triggered by a facile system of iron (III) chloride/hydrogen peroxide (FeCl3/H2O2) under acidic condition. The oxygen-radical species generated by FeCl3/H2O2 largely promote covalent polymerization and deposition rate of dopamine. This not only considerably shortens the deposition time of PDA, but also improves the stability of PDA coatings, combined with the chelation of Fe ions in PDA matrices. SEM, AFM, XPS, zeta potential and water contact angle analyses confirmed the formation of a hydrophilic, smooth, and negatively charged PDA layer onto several membrane substrates. Herein, PDA-coated hydrolyzed polyacrylonitrile membranes yield a remarkable NF performance with superior dye retentions (direct red 23: 98.6%, Congo red: 99.0%, reactive blue 2: 98.2%) and a high water permeability (17.5 L m-2 h-1 bar-1). Furthermore, a low salt rejection (NaCl: 5.6%) of PDA-modified membranes demonstrates their great potential in fractionation of dye/salt mixtures. Meanwhile, the PDA-modified membranes show an excellent organic fouling resistance and a long-term stability. This facile, environmental-friendly method provides a rapid PDA deposition onto various substrates for a wide range of applications, including filtration membranes.

Mussel-Inspired Architecture of High-Flux Loose Nanofiltration Membrane Functionalized with Antibacterial Reduced Graphene Oxide-Copper Nanocomposites.

Graphene-based nanocomposites have a vast potential for wide-ranging antibacterial applications due to the inherently strong biocidal activity and versatile compatibility of such nanocomposites. Therefore, graphene-based functional nanomaterials can introduce enhanced antibiofouling and antimicrobial properties to polymeric membrane surfaces. In this study, reduced graphene oxide-copper (rGOC) nanocomposites were synthesized as newly robust biocides via in situ reduction. Inspired by the emerging method of bridging ultrafiltration membrane surface cavities, loose nanofiltration (NF) membranes were designed using a rapid (2 h) bioinspired strategy in which rGOC nanocomposites were firmly codeposited with polydopamine (PDA) onto an ultrafiltration support. A series of analyses (SEM, EDS, XRD, XPS, TEM, and AFM) confirmed the successful synthesis of the rGO-Cu nanocomposites. The secure loading of rGOC composites onto the membrane surfaces was also confirmed by SEM and AFM images. Water contact angle results display a high surface hydrophilicity of the modified membranes. The PDA-rGOC functionalization layer facilitated a high water permeability (22.8 L m-2 h-1 bar-1). The PDA-rGOC modification additionally furnished the membrane with superior separation properties advantageous for various NF applications such as dye purification or desalination, as ultrahigh (99.4% for 0.5 g L-1 reactive blue 2) dye retention and high salt permeation (7.4% for 1.0 g L-1 Na2SO4, 2.5% for 1.0 g L-1 NaCl) was achieved by the PDA-rGOC-modified membranes. Furthermore, after 3 h of contact with Escherichia coli (E. coli) bacteria, the rGOC-functionalized membranes exhibited a strong antibacterial performance with a 97.9% reduction in the number of live E. coli. This study highlights the use of rGOC composites for devising loose NF membranes with strong antibacterial and separation performance.

Elevated Performance of Thin Film Nanocomposite Membranes Enabled by Modified Hydrophilic MOFs for Nanofiltration.

Metal-organic frameworks (MOFs) are studied for the design of advanced nanocomposite membranes, primarily due to their ultrahigh surface area, regular and highly tunable pore structures, and favorable polymer affinity. However, the development of engineered MOF-based membranes for water treatment lags behind. Here, thin-film nanocomposite (TFN) membranes containing poly(sodium 4-styrenesulfonate) (PSS) modified ZIF-8 (mZIF) in a polyamide (PA) layer were constructed via a facile interfacial polymerization (IP) method. The modified hydrophilic mZIF nanoparticles were evenly dispersed into an aqueous solution comprising piperazine (PIP) monomers, followed by polymerizing with trimesoyl chloride (TMC) to form a composite PA film. FT-IR spectroscopy and XPS analyses confirm the presence of mZIF nanoparticles on the top layer of the membranes. SEM and AFM images evince a retiform morphology of the TFN-mZIF membrane surface, which is intimately linked to the hydrophilicity and adsorption capacity of mZIF nanoparticles. Furthermore, the effect of different ZIF-8 loadings on the overall membrane performance was studied. Introducing the hydrophilizing mZIF nanoparticles not only furnishes the PA layer with a better surface hydrophilicity and more negative charge but also more than doubles the original water permeability, while maintaining a high retention of Na2SO4. The ultrahigh retentions of reactive dyes (e.g., reactive black 5 and reactive blue 2, >99.0%) for mZIF-functionalized PA membranes ensure their superior nanofiltration performance. This facile, cost-effective strategy will provide a useful guideline to integrate with other modified hydrophilic MOFs to design nanofiltration for water treatment.

Zeolitic Imidazolate Framework/Graphene Oxide Hybrid Nanosheets Functionalized Thin Film Nanocomposite Membrane for Enhanced Antimicrobial Performance.

Inspired by the rational design concept, a novel antimicrobial agent zeolitic imidazolate framework-8 (ZIF-8)/graphene oxide (GO) was synthesized and utilized as a novel and efficient bactericidal agent to fabricate antimicrobial thin film nanocomposite (TFN) membranes via interfacial polymerization. The resultant hybrid nanosheets not only integrates the merits of both ZIF-8 and GO but also yields a uniform dispersion of ZIF-8 onto GO nanosheets simultaneously, thus effectively eliminating the agglomeration of ZIF-8 in the active layer of membranes. A ZIF-8/GO thin film nanocomposite (TFN-ZG) membrane with typical water permeability (40.63 L m(-2) h(-1) MPa(-1)) allows for efficient bivalent salt removal (rejections of Na2SO4 and MgSO4 were 100% and 77%, respectively). Furthermore, the synthesized ZIF-8/GO nanocomposites were verified to have an optimal antimicrobial activity (MIC,128 µg/mL) in comparison with ZIF-8 and GO separately, which sufficiently endowed the TFN-ZG membrane with excellent antimicrobial activity (84.3% for TFN-ZG3). Besides, the antimicrobial mechanisms of ZIF-8/GO hybrid nanosheets and TFN-ZG membranes were proposed. ZIF-8/GO functionalized membrane with high antimicrobial activity and salt retention denoted its great potential in water desalination, and we suggest that ZIF-8 based crystal may offer a new pathway for the synthesis of a multifunctional bactericide.