Transient chemical and structural changes in graphene oxide during ripening.

Graphene oxide (GO)-the oxidized form of graphene-is actively studied in various fields, such as energy, electronic devices, separation of water, materials engineering, and medical technologies, owing to its fascinating physicochemical properties. One major drawback of GO is its instability, which leads to the difficulties in product management. A physicochemical understanding of the ever-changing nature of GO can remove the barrier for its growing applications. Here, we evidencde the presence of intrinsic, metastable and transient GO states upon ripening. The three GO states are identified using a [Formula: see text] transition peak of ultraviolet-visible absorption spectra and exhibit inherent magnetic and electrical properties. The presence of three states of GO is supported by the compositional changes of oxygen functional groups detected via X-ray photoelectron spectroscopy and structural information from X-ray diffraction analysis and transmission electron microscopy. Although intrinsic GO having a [Formula: see text] transition at 230.5 ± 0.5 nm is stable only for 5 days at 298 K, the intrinsic state can be stabilized by either storing GO dispersions below 255 K or by adding ammonium peroxydisulfate.

Direct Evidence of Reversible SnO2-Li Reactions in Carbon Nanospaces.

We present herein that carbon nanospaces are the key reaction space to improve the reversibility of the reaction of SnO2 with Li-ions for lithium-ion batteries, demonstrated by both ex situ and in situ observations using high-resolution scanning transmission electron microscopy with electron energy loss spectroscopy. Conversion-type electrode materials, such as SnO2, undergo large volume changes and phase separation during the charge-discharge process, which lead to degradation in the battery performance. By confining the SnO2-Li reaction within carbon nanopores, the battery performance is improved. However, the exact phase changes of SnO2 in the nanospaces are unclear. By directly observing the electrodes during the charge-discharge process, the carbon walls are capable of preventing the expansion of SnO2 particles and minimizing the conversion-induced phase separation of Sn and Li2O on the sub-nanometer scale. Thus, nanoconfinement structures can effectively improve the reversibility performance of conversion-type electrode materials.

Air-permeable redox mediated transcutaneous CO2 sensor.

Standard clinical care of neonates and the ventilation status of human patients affected with coronavirus disease involves continuous CO2 monitoring. However, existing noninvasive methods are inadequate owing to the rigidity of hard-wired devices, insubstantial gas permeability and high operating temperature. Here, we report a cost-effective transcutaneous CO2 sensing device comprising elastomeric sponges impregnated with oxidized single-walled carbon nanotubes (oxSWCNTs)-based composites. The proposed device features a highly selective CO2 sensing response (detection limit 155 ± 15 ppb), excellent permeability and reliability under a large deformation. A follow-up prospective study not only offers measurement equivalency to existing clinical standards of CO2 monitoring but also provides important additional features. This new modality allowed for skin-to-skin care in neonates and room-temperature CO2 monitoring as compared with clinical standard monitoring system operating at high temperature to substantially enhance the quality for futuristic applications.

Mitigation of Edge and Surface States Effects in Two-Dimensional WS2 for Photocatalytic H2 Generation.

Large scale development of the 2D transition metal di-chalcogenides (TMDC) relies on landmark improvement in performance, which could emerge from nanostructuration. Using p-WS2 nanoflakes with different degrees of exfoliation and fracturing, perspectives were provided to develop high-surface-area 2D p-WS2 films for the photocatalytic hydrogen generation. The critical role of inter-nanoflakes contacts within high-surface-area 2D films was demonstrated, highlighting the benefit of plane/plane versus edge/plane contacts. Evidence of the high density of surface states displayed by these 2D films was provided through electrochemical measurements. In addition to operating as recombination centers, the surface states were shown to give rise to deleterious Fermi-level pinning (FLP), which dramatically decreased the efficiency of charge carrier separation. Lastly, promising strategies yielding FLP suppression via surface states modification were proposed. In particular, use of a multifunctional ultrathin film displaying healing, catalytic, and n-type semiconduction properties was shown to greatly enhance charge carrier separation and transport to the photo-electrode/electrolyte interface. When the 2D photoelectrodes were fabricated with the above prerequisites (i. e., a high proportion of plane/plane contacts and a successful surface states chemical modification), a photocurrent up to 4.5 mA cm-2 was achieved for the first time on 2D p-WS2 photocathodes for hydrogen generation.

SnO2-Embedded Nanoporous Carbon Electrode with a Reaction-Buffer Space for Stable All-Solid-State Li Ion Batteries.

The conventional approach for fabricating all-solid-state batteries has required a highly dense layer of electrode and electrolyte. Their close contact interface is not suitable for alloy- or conversion-based active materials because their large volume change in lithiation/delithiation reactions causes a collapse of the contact interface or reaction limitations under mechanical constriction. In this study, we propose that a SnO2-embedded porous carbon electrode shows high cyclability and high capacity even at high constraint pressure owing to the nanopores, which work as a buffer space for the large volume change accompanied with SnO2-Sn conversion reaction and Sn-Li alloying-dealloying reaction. A detailed investigation between structural parameters of the electrode material and charge-discharge properties revealed Li ion conduction in carbon nanopores from a solid electrolyte located outside as well as the optimal conditions to yield high performance. SnO2-loading (75 wt %) in carbon nanopores, which provides the buffer space corresponding to the inevitable volume expansion by full lithiation, brought out an excellent performance at room temperature superior to that in an organic liquid electrolyte system: a high capacity of 1023 mAh/g-SnO2 at 50 mA/g, high capacity retention of 97% at 300th cycle at 300 mA/g, and high rate capability with over 75% capacity retention at 1000 against 50 mA/g, whose values are also superior to the system using the organic liquid electrolyte.

Adsorption enhancement of nitrogen gas by atomically heterogeneous nanospace of boron nitride.

In this study, porous boron nitride (p-BN) with hexagonal phase boron nitride (h-BN) pore walls was synthesized using high-temperature calcination. Negligible variation in pore-wall structure can be observed in powder X-ray diffraction (XRD) profiles and infrared (IR) spectra. However, a highly stable p-BN with a stable pore structure even at 973 K under the oxidative conditions is obtained when synthesized at higher than 1573 K under nitrogen gas flow. For p-BN, this stability is obtained by generating h-BN microcrystals. Nitrogen adsorption-desorption isotherms at 77 K provide type-IV features and typical adsorption-desorption hysteresis, which suggests micropore and mesopore formation. Moreover, adsorption-desorption isotherms of Ar at 87 K are measured and compared with those of nitrogen. The relative adsorbed amount of nitrogen (i.e., the amount of nitrogen normalized by that of Ar at each relative pressure or adsorption potential value) on p-BN is considerably larger than that on microporous carbon at low-pressure regions, which suggests the existence of strong adsorption sites on the p-BN surface. In fact, the relative number of adsorbed nitrogen molecules to that of Ar on p-BN is, at most, 150%-200% larger than that on microporous carbon for the same adsorption potential state. Furthermore, additional adsorption enhancement to nitrogen between P/P 0 = 10-5 and 10-3 can be observed for p-BN treated at 1673 K, which suggests the uniformly adsorbed layer formation of nitrogen molecules in the vicinity of a basal planar surface. Thus, unlike typical nanoporous sp2 carbons, p-BN materials have the potential to enhance adsorption for certain gas species because of their unique surface state.

New insights into the heat of adsorption of water, acetonitrile, and n-hexane in porous carbon with oxygen functional groups.

Isosteric heat of adsorption is exquisitely sensitive to structural changes in carbon surfaces based on the energetic behavior of the interactions between adsorbates and carbon materials. We discuss the relationships between porous structures, oxygen functional groups, and heat of adsorption based on the behavior of the heat of adsorption of polar and non-polar fluids on porous carbon materials with oxygen functional groups. The porosity and functional groups of porous carbon materials were estimated from N2 adsorption isotherms at 77 K and temperature-programmed desorption. High-resolution adsorption isotherms of water, acetonitrile (polar fluid), and n-hexane (non-polar fluid) were measured on porous carbon materials with different pore size distributions and amounts of oxygen functional groups at various temperatures. The heats of adsorption were determined by applying the Clausius-Clapeyron equation to the adsorption isotherms. The heat of adsorption curves directly reflect the effects of interactions of fluid-oxygen functional groups, fluid-basal planes of pore walls, and fluid-fluid interfaces. In particular, the heat of adsorption curve of water is very sensitive to surface oxygen functional groups. This finding indicates the possibility of estimating the relative amounts of oxygen functional groups on porous carbon materials based on the amounts of water adsorbed at specific relative pressures.

High capacity and stable all-solid-state Li ion battery using SnO2-embedded nanoporous carbon.

Extensive research efforts are devoted to development of high performance all-solid-state lithium ion batteries owing to their potential in not only improving safety but also achieving high stability and high capacity. However, conventional approaches based on a fabrication of highly dense electrode and solid electrolyte layers and their close contact interface is not always applicable to high capacity alloy- and/or conversion-based active materials such as SnO2 accompanied with large volume change in charging-discharging. The present work demonstrates that SnO2-embedded nanoporous carbons without solid electrolyte inside the nanopores are a promising candidate for high capacity and stable anode material of all-solid-state battery, in which the volume change reactions are restricted in the nanopores to keep the constant electrode volume. A prototype all-solid-state full cell consisting of the SnO2-based anode and a LiNi1/3Co1/3Mn1/3O2-based cathode shows a good performance of 2040 Wh/kg at 268.6 W/kg based on the anode material weight.

Nanoporosity Change on Elastic Relaxation of Partially Folded Graphene Monoliths.

Fabrication of nanographene shows a promising route for production of designed porous carbons, which is indispensable for highly efficient molecular separation and energy storage applications. This process requires a better understanding of the mechanical properties of nanographene in their aggregated structure. We studied the structural and mechanical properties of nanographene monoliths compressed at 43 MPa over different times from 3 to 25 h. While in monoliths compressed over shorter time adsorption isotherms of Ar at 87 K or N2 at 77 K exhibited a prominent hysteresis due to presence of predominant mesopores, compression for long time induces a low pressure hysteresis. On the other hand, compression for 25 h increases the microporosity evaluated by Ar adsorption, not by N2 adsorption, indicating that 25 h compression rearranges the nanographene stacking structure to produce ultramicropores that can be accessible only for Ar. TEM, X-ray diffraction, and Raman spectroscopic studies indicated that the compression for 25 h unfolds double-bent-like structures, relaxing the unstable nanographene stacked structure formed on the initial compression without nanographene sheets collapse. This behavior stems from the highly elastic nature of the nanographenes.

Water Adsorption Property of Hierarchically Nanoporous Detonation Nanodiamonds.

The detonation nanodiamonds form the aggregate having interparticle voids, giving a marked hygroscopic property. As the relationship between pore structure and water adsorption of aggregated nanodiamonds is not well understood yet, adsorption isotherms of N2 at 77 K and of water vapor at 298 K of the well-characterized aggregated nanodiamonds were measured. HR-TEM and X-ray diffraction showed that the nanodiamonds were highly crystalline and their average crystallite size was 4.5 nm. The presence of the graphitic layers on the nanodiamond particle surface was confirmed by the EELS examination. The pore size distribution analysis showed that nanodiamonds had a few ultramicropores with predominant mesopores of 4.5 nm in average size. The water vapor adsorption isotherm of IUPAC Type V indicates the hydrophobicity of the nanodiamond aggregates, with the presence of hydrophilic sites. Then the hygroscopic nature of nanodiamonds should be associated with the surface functionalities of the graphitic shell and the ultramicropores on the mesopore walls.

Experimental Information on the Adsorbed Phase of Water Formed in the Inner Pore of Single-Walled Carbon Nanotube Itself.

Thus far, nobody has successfully obtained the accurate information on the properties of the adsorbed phases of gases or vapors formed inside a cylindrical micropore of single-walled carbon nanotube (SWCNT) itself based on the experimental procedure. In this work, we succeeded in analyzing experimentally the properties of adsorbed nitrogen and water confined in the inner pore of SWCNT itself by opening the pore composed of close-ended SWCNT without any changes in the surface state and also by applying the unique method for characterization; both the amounts, as well as properties, of surface functional groups and the bundle structure are the same even after the treatments for introducing an open-ended structure to a close-ended one. As a result, the average pore sizes, as well as characteristic adsorption behavior, on the two types of sample were available from the analysis of respective difference adsorption isotherms of nitrogen measured at 77 K between the adsorbed amounts on the open-ended SWCNT and that on the close-ended one. The evaluated pore sizes well coincide with the results estimated by Raman data. These results strongly support that we could analyze the adsorbed phases formed only in the inner pore of SWCNTs by applying the present method. Furthermore, we could analyze the adsorbed phase of water formed inside the cylindrical micropore of SWCNTs, showing the difference in the densities of adsorbed water depending on the pore sizes from the value of bulk water; the densities of the adsorbed water were evaluated to be 0.62 and 0.71 g mL(-1) for SWCNTs having average pore sizes of 1.3 and 1.7 nm, respectively, which were in harmony with those obtained by the theoretical calculations reported by other researchers. The proposed analysis method makes it possible to recognize the focused states of the adsorbed water formed inside the cylindrical micropore of SWCNT more precisely and correctly. The method proposed will shed light on the discussion related to the detailed nature of various adsorbed gases into SWCNT, to the detailed role of adsorbed species formed inside pore in various phenomena, and to the designing the useful materials based on the gained knowledge.

Enhanced charge-discharge properties of SnO2 nanocrystallites in confined carbon nanospace.

Almost perfect embedding of SnO2 nanocrystallites in carbon nanopores was achieved by in situ synthesis using vaporized SnCl2 and silica opal-derived nanoporous carbons. The reversibility of SnO2-Sn conversion and Sn-Li alloying/de-alloying reactions was greatly enhanced by the confinement in regulated carbon nanospace.

Enhanced electric double-layer capacitance by desolvation of lithium ions in confined nanospaces of microporous carbon.

Carbon electrodes with specific microporous structures are strongly desired to improve the performance of electric double-layer capacitors (EDLCs). We report solvated states of Li ions in confined carbon micropores affecting specific capacitance. The average Li(+) solvation number of 1 M LiClO4/propylene carbonate (PC) electrolyte introduced into porous carbon electrodes was determined using Raman spectroscopy and (7)Li NMR. Micropores with slightly larger pore size against the solvated molecules and the narrow two-dimensional spaces decreased the solvation number, enhancing specific capacitance. Hence, specific carbon morphology may be related to high EDL capacitance, and micropore structure is important in obtaining highly capacitive EDLC materials.

Nanospace-enhanced photoreduction for the synthesis of copper(I) oxide nanoparticles under visible-light irradiation.

Nanoparticles of copper(I) oxide (cuprous oxide; Cu2O) were able to be synthesized from nano-restricted copper acetate (Cu(OAc)2) in micropores of single-wall carbon nanotubes (SWNTs) by visible-light photoreduction. The specific structure of confined Cu(OAc)2 in the micropore is indispensable for the reduction process to Cu2O by the irradiation, because, in general, aqueous solution of Cu(OAc)2 can be reduced under UV-light irradiated conditions. The present results strongly suggest that the micropore of SWNTs whose pore width is in the micropore-size range can play as nanoreactor space for the synthesis of Cu2O through the nano-restricted precursor whose reactivity is different from that in the bulk phase.

Conducting linear chains of sulphur inside carbon nanotubes.

Despite extensive research for more than 200 years, the experimental isolation of monatomic sulphur chains, which are believed to exhibit a conducting character, has eluded scientists. Here we report the synthesis of a previously unobserved composite material of elemental sulphur, consisting of monatomic chains stabilized in the constraining volume of a carbon nanotube. This one-dimensional phase is confirmed by high-resolution transmission electron microscopy and synchrotron X-ray diffraction. Interestingly, these one-dimensional sulphur chains exhibit long domain sizes of up to 160 nm and high thermal stability (~800 K). Synchrotron X-ray diffraction shows a sharp structural transition of the one-dimensional sulphur occurring at ~450-650 K. Our observations, and corresponding electronic structure and quantum transport calculations, indicate the conducting character of the one-dimensional sulphur chains under ambient pressure. This is in stark contrast to bulk sulphur that needs ultrahigh pressures exceeding ~90 GPa to become metallic.

Direct synthesis of novel homogeneous nanocomposites of Li2MnSiO4 and carbon as a potential Li-ion battery cathode material.

Homogeneous nanocomposites of nanocrystalline Li2MnSiO4 and carbon as well as a carbon nanotubes-embedded nanocomposite are synthesized directly by a novel method using organic-inorganic hybrid polymers which consist of covalently bonded phenolic oligomer and siloxane parts. The nanocomposites show superior charge-discharge performance at room temperature in spite of low carbon contents.

Highly compressed nanosolution restricted in cylindrical carbon nanospaces.

We shed light on the specific hydration structure around a zinc ion of nanosolution restricted in a cylindrical micropore of single-wall carbon nanotube (SWNT) by comparison with the structure restricted in a cylindrical mesopore of multi-wall carbon nanotube (MWNT) and that of bulk aqueous solution. The average micropore width of open-pore SWNT was 0.87 nm which is equivalent to the size of a hydrated zinc ion having 6-hydrated water molecules. We could impregnate the zinc ions into the micropore of SWNT with negligible amounts of ion-exchanged species on surface functional groups by the appropriate oxidation followed by heat treatment under an inert condition. The results of X-ray absorption fine structure (XAFS) spectra confirmed that the proportion of dissolved species in nanospaces against the total adsorbed amounts of zinc ions on the open-pore SWNT and MWNT were 44 and 61%, respectively, indicating the formation of a dehydrated structure in narrower nanospaces. The structure parameters obtained by the analysis of XAFS spectra also indicate that the dehydrated and highly compressed hydration structure can be stably formed inside the cylindrical micropore of SWNT where the structure is different from that inside the slit-shaped micropore whose pore width is less than 1 nm. Such a unique structure needs not only a narrow micropore geometry which is equivalent to the size of a hydrated ion but also the cylindrical nature of the pore.

Diffusion-barrier-free porous carbon monoliths as a new form of activated carbon.

For the practical use of activated carbon (AC) as an adsorbent of CH(4) , tightly packed monoliths with high microporosity are supposed to be one of the best morphologies in terms of storage capacity per apparent volume of the adsorbent material. However, monolith-type ACs may cause diffusion obstacles in adsorption processes owing to their necked pore structures among the densely packed particles, which result in a lower adsorption performance than that of the corresponding powder ACs. To clarify the relationship between the pore structure and CH4 adsorptivity, microscopic observations, structural studies on the nanoscale, and conductivity measurements (thermal and electrical) were performed on recently developed binder-free, self-sinterable ACs in both powder and monolithic forms. The monolith samples exhibited higher surface areas and electrical conductivities than the corresponding powder samples. Supercritical CH4 adsorption isotherms were measured for each powder and monolith sample at up to 7 MPa at 263, 273, and 303 K to elucidate their isosteric heats of adsorption and adsorption rate constants, which revealed that the morphologies of the monolith samples did not cause serious drawbacks for the adsorption and desorption processes. This will further facilitate the availability of diffusion-barrier-free microporous carbon monoliths as practical CH4 storage adsorbents.

Selective probe of the morphology and local vibrations at carbon nanoasperities.

We introduce a way to selectively probe local vibration modes at nanostructured asperities such as tips of carbon nanohorns. Our observations benefit from signal amplification in surface-enhanced Raman scattering (SERS) at sites near a silver surface. We observe nanohorn tip vibration modes in the range 200-500 cm(-1), which are obscured in regular Raman spectra. Ab initio density functional calculations assign modes in this frequency range to local vibrations at the nanohorn cap resembling the radial breathing mode of fullerenes. Careful interpretation of our SERS spectra indicates presence of caps with 5 or 6 pentagons, which are chemically the most active sites. Changes in the peak intensities and frequencies with time indicate that exposure to laser irradiation may cause structural rearrangements at the cap.