Hot luminescence from single-molecule chromophores electrically and mechanically self-decoupled by tripodal scaffolds.

Control over the electrical contact to an individual molecule is one of the biggest challenges in molecular optoelectronics. The mounting of individual chromophores on extended tripodal scaffolds enables both efficient electrical and mechanical decoupling of individual chromophores from metallic leads. Core-substituted naphthalene diimides fixed perpendicular to a gold substrate by a covalently attached extended tripod display high stability with well-defined and efficient electroluminescence down to the single-molecule level. The molecularly controlled spatial arrangement balances the electric conduction for electroluminescence and the insulation to avoid non-radiative carrier recombination, enabling the spectrally and spatially resolved electroluminescence of individual self-decoupled chromophores in a scanning tunneling microscope. Hot luminescence bands are even visible in single self-decoupled chromophores, documenting the mechanical decoupling between the vibrons of the chromophore and the substrate.

Activating Electroluminescence of Charged Naphthalene Diimide Complexes Directly Adsorbed on a Metal Substrate.

Electroluminescence from single molecules adsorbed on a conducting surface imposes conflicting demands for the molecule-electrode coupling. To conduct electrons, the molecular orbitals need to be hybridized with the electrodes. To emit light, they need to be decoupled from the electrodes to prevent fluorescence quenching. Here, we show that fully quenched 2,6-core-substituted naphthalene diimide derivative in a self-assembled monolayer directly deposited on a Au(111) surface can be activated with the tip of a scanning tunneling microscope to decouple the relevant frontier orbitals from the metallic substrate. In this way, individual molecules can be driven from a strongly hybridized state with quenched luminescence to a light-emitting state. The emission performance compares in terms of quantum efficiency, stability, and reproducibility to that of single molecules deposited on thin insulating layers. Quantum chemical calculations suggest that the emitted light originates from the singly charged cationic pair of the molecules.

Self-Assembled Monolayers of Molecular Conductors with Terpyridine-Metal Redox Switching Elements: A Combined AFM, STM and Electrochemical Study.

Self-assembled monolayers (SAMs) of terpyridine-based transition metal (ruthenium and osmium) complexes, anchored to gold substrate via tripodal anchoring groups, have been investigated as possible redox switching elements for molecular electronics. An electrochemical study was complemented by atomic force microscopy (AFM) and scanning tunneling microscopy (STM) methods. STM was used for determination of the SAM conductance values, and computation of the attenuation factor ß from tunneling current-distance curves. We have shown that SAMs of Os-tripod molecules contain larger adlayer structures compared with SAMs of Ru-tripod molecules, which are characterized by a large number of almost evenly distributed small islands. Furthermore, upon cyclic voltammetric experimentation, Os-tripod films rearrange to form a smaller number of even larger islands, reminiscent of the Ostwald ripening process. Os-tripod SAMs displayed a higher surface concentration of molecules and lower conductance compared with Ru-tripod SAMs. The attenuation factor of Os-tripod films changed dramatically, upon electrochemical cycling, to a higher value. These observations are in accordance with previously reported electron transfer kinetics studies.

Synthesis and Surface Behaviour of NDI Chromophores Mounted on a Tripodal Scaffold: Towards Self-Decoupled Chromophores for Single-Molecule Electroluminescence.

This paper reports the efficient synthesis, absorption and emission spectra, and the electrochemical properties of a series of 2,6-disubstituted naphthalene-1,4,5,8-tetracarboxdiimide (NDI) tripodal molecules with thioacetate anchors for their surface investigations. Our studies showed that, in particular, the pyrrolidinyl group with its strong electron-donating properties enhanced the fluorescence of such core-substituted NDI chromophores and caused a significant bathochromic shift in the absorption spectrum with a correspondingly narrowed bandgap of 1.94 eV. Cyclic voltammetry showed the redox properties of NDIs to be influenced by core substituents. The strong electron-donating character of pyrrolidine substituents results in rather high HOMO and LUMO levels of -5.31 and -3.37 eV when compared with the parental unsubstituted NDI. UHV-STM measurements of a sub-monolayer of the rigid tripodal NDI chromophores spray deposited on Au(111) show that these molecules mainly tend to adsorb flat in a pairwise fashion on the surface and form unordered films. However, the STML experiments also revealed a few molecular clusters, which might consist of upright oriented molecules protruding from the molecular island and show electroluminescence photon spectra with high electroluminescence yields of up to 6×10-3 . These results demonstrate the promising potential of the NDI tripodal chromophores for the fabrication of molecular devices profiting from optical features of the molecular layer.

Enantiomeric Separation of Semiconducting Single-Walled Carbon Nanotubes by Acid Cleavable Chiral Polyfluorene.

Helical wrapping by conjugated polymer has been demonstrated as a powerful tool for the sorting of single-walled carbon nanotubes (SWCNTs) according to their electronic type, chiral index, and even handedness. However, a method of one-step extraction of left-handed (M) and right-handed (P) semiconducting SWCNTs (s-SWCNTs) with subsequent cleavage of the polymer has not yet been published. In this work, we designed and synthesized one pair of acid cleavable polyfluorenes with defined chirality for handedness separation of s-SWCNTs from as-produced nanotubes. Each monomer contains a chiral center on the fluorene backbone in the 9-position, and the amino and carbonyl groups in the 2- and 7-positions maintain the head-to-tail regioselective polymerization resulting in polyimines with strictly all-(R) or all-(S) configuration. The obtained chiral polymers exhibit a strong recognition ability toward left- or right-handed s-SWCNTs from commercially available CoMoCAT SWCNTs with a sorting process requiring only bath sonication and centrifugation. Interestingly, the remaining polymer on each single nanotube, which helps to prevent aggregation, does not interfere with the circular dichroism signals from the nanotube at all. Therefore, we observed all four interband transition peaks (E11, E22, E33, E44) in the circular dichroism (CD) spectra of the still wrapped optically enriched left-handed and right-handed (6,5) SWCNTs in toluene. Binding energies obtained from molecular dynamics simulations were consistent with our experimental results and showed a significant preference for one specific handedness from each chiral polymer. Moreover, the imine bonds along the polymer chains enable the release of the nanotubes upon acid treatment. After s-SWNT separation, the polymer can be decomposed into monomers and be cleanly removed under mild acidic conditions, yielding dispersant-free handedness sorted s-SWNTs. The monomers can be almost quantitatively recovered to resynthesize the chiral polymer. This approach enables high selective isolation of polymer-free s-SWNT enantiomers for their further applications in carbon nanotube (CNT) devices.

Addressing a lattice of rotatable molecular dipoles with the electric field of an STM tip.

Functional molecular groups mounted on specific foot structures are ideal model systems to study intermolecular interactions, due to the possibility to separate the functionality and the adsorption mechanism. Here, we report on the rotational switching of a thioacetate group mounted on a tripodal tetraphenylmethane (TPM) derivative adsorbed in ordered islands on a Au(111) surface. Using low temperature scanning tunnelling microscopy, individual freestanding molecular groups of the lattice can be switched between two bistable orientations. The functional dependence of this rotational switching on the sample bias and tip-sample distance allows us to model the energy landscape of this molecular group as an electric dipole in the electric field of the tunnelling junction. As expected for the interaction of two dipoles, we found states of neighbouring molecules to be correlated.

Tuning the contact conductance of anchoring groups in single molecule junctions by molecular design.

A tetraphenylmethane tripod functionalized with three thiol moieties in the para position can serve as a supporting platform for functional molecular electronic elements. A combined experimental scanning tunneling microscopy break junction technique with theoretical approaches based on density functional theory and non-equilibrium Green's function formalism was used for detailed charge transport analysis to find configurations, geometries and charge transport pathways in the molecular junctions of single molecule oligo-1,4-phenylene conductors containing this tripodal anchoring group. The effect of molecular length (n = 1 to 4 repeating phenylene units) on the charge transport properties and junction configurations is addressed. The number of covalent attachments between the electrode and the tripodal platform changes with n affecting the contact conductance of the junction. The longest homologue n = 4 adopts an upright configuration with all three para thiolate moieties of the tripod attached to the gold electrode. The contact conductance of the tetraphenylmethane tripod substituted by thiols in the para position is higher than that substituted in the meta position. Such molecular arrangement is highly conducting and allows well-defined directional positioning of a variety of functional groups.

A New Class of Rigid Multi(azobenzene) Switches Featuring Electronic Decoupling: Unravelling the Isomerization in Individual Photochromes.

We report a novel class of star-shaped multiazobenzene photoswitches comprising individual photochromes connected to a central trisubstituted 1,3,5-benzene core. The unique design of such C3-symmetric molecules, consisting of conformationally rigid and pseudoplanar scaffolds, made it possible to explore the role of electronic decoupling in the isomerization of the individual azobenzene units. The design of our tris-, bis-, and mono(azobenzene) compounds limits the π-conjugation between the switches belonging to the same molecule, thus enabling the efficient and independent isomerization of each photochrome. An in-depth experimental insight by making use of different complementary techniques such as UV-vis absorption spectroscopy, high performance liquid chromatography, and advanced mass spectrometry methods as ion mobility revealed an almost complete absence of electronic delocalization. Such evidence was further supported by both experimental (electrochemistry, kinetical analysis) and theoretical (DFT calculations) analyses. The electronic decoupling provided by this molecular design guarantees a remarkably efficient photoswitching of all azobenzenes, as evidenced by their photoisomerization quantum yields, as well as by the Z-rich UV photostationary states. Ion mobility mass spectrometry was exploited for the first time to study multiphotochromic compounds revealing the occurrence of a large molecular shape change in such rigid star-shaped azobenzene derivatives. In view of their high structural rigidity and efficient isomerization, our multiazobenzene photoswitches can be used as key components for the fabrication of complex stimuli-responsive porous materials.

Six state molecular revolver mounted on a rigid platform.

The rotation of entire molecules or large moieties happens at 100 ps time scales and the transition process itself is experimentally inaccessible to scanning probe techniques. However, the reversible switching of a molecule between more than two metastable states allows to assign a rotational switching direction. Rotational switching is a phenomenon that is particularly interesting with regard to possible applications in molecular motors. In this work, single tetraphenylmethane molecules deposited on a Au(111) surface were studied in a low temperature scanning tunneling microscope (STM). These molecules comprise rotational axes mounted on a tripodal sulfur-anchored stand and with the STM tip, we were able to induce transitions between six rotational states of the molecular motif. We were able to identify critical parameters for the onset of rotational switching and to characterize the influence of the local environment. The subtle difference between fcc and hcp stacking and the rotational state of neighboring molecules clearly influence the population of the rotational states.

Probabilistic mapping of single molecule junction configurations as a tool to achieve the desired geometry of asymmetric tripodal molecules.

Four molecules containing identical tripodal anchors and p-oligophenylene molecular wires of increasing length were used to demonstrate tuning of the asymmetric molecular junction to the desired geometry by probabilistic mapping of single molecule junction configurations in a scanning tunnelling microscopy break junction experiment.

Aqueous Assembly of Zwitterionic Daisy Chains.

The synthesis and characterization of zwitterionic molecular [c2]- and [a2]-daisy chains are described, relying on recognition of a positively charged cyclophane and a negatively charged oligo(phenylene-ethynylene) (OPE) rod in aqueous medium. For this purpose, syntheses of an acetylene-functionalized macrocyclic receptor and a water-soluble OPE-rod as the guest component are presented, from which a heteroditopic daisy chain monomer was prepared. This monomer aggregated strongly in water/methanol 4:1 and formed molecular daisy chains, which were isolated as interlocked species from a stoppering reaction at 1 mm concentration. The cyclic dimer [c2] was the main product with an isolated yield of 30 % and consisted of a mixture of diastereomers, as evidenced by 1 H NMR spectroscopy.

Electronic Decoupling in C3-Symmetrical Light-Responsive Tris(Azobenzene) Scaffolds: Self-Assembly and Multiphotochromism.

We report the synthesis of a novel C3-symmetrical multiphotochromic molecule bearing three azobenzene units at positions 1, 3, 5 of the central phenyl ring. The unique geometrical design of such a rigid scaffold enables the electronic decoupling of the azobenzene moieties to guarantee their simultaneous isomerization. Photoswitching of all azobenzenes in solution was demonstrated by means of UV-vis absorption spectroscopy and high performance liquid chromatography (HPLC) analysis. Scanning tunneling microscopy investigations at the solid-liquid interface, corroborated by molecular modeling, made it possible to unravel the dynamic self-assembly of such systems into ordered supramolecular architectures, by visualizing and identifying the patterns resulting from three different isomers, thereby demonstrating that the multiphotochromism is retained when the molecules are confined in two dimensions.

p-Carborane Conjugation in Radical Anions of Cage-Cage and Cage-Phenyl Compounds.

Optical electron transfer (intervalence) transitions in radical anions of p-carborane oligomers attest to delocalization of electrons between two p-carboranes cages or a p-carborane and a phenyl ring. Oligomers of the 12 vertex p-carborane (C2B10H12) cage, [12], with up to 3 cages were synthesized, as well as p-carboranes with one or two trimethylsilylphenyl groups, [6], attached to the carbon termini. Pulse radiolysis in tetrahydrofuran produced radical anions, determined redox potentials by equilibria and measured their absorption spectra. Density functional theory computations provided critical insight into the optical electron transfer bands and electron delocalization. One case, [6-12-6], showed both Robin-Day class II and III transitions. The class III transition resulted from a fully delocalized excess electron across both benzene rings and the central p-carborane, with an electronic coupling Hab = 0.46 eV between the cage and either benzene. This unprecedented finding shows that p-carborane bridges are not simply electron withdrawing insulators. In other cases with more than ∼1/2 of the excess electron localized on a [12], large cage distortions were triggered, producing a partially open cage with a nido-like structure. This resulted in class II transitions with similar Hab but massive reorganization energies. The computations also predicted delocalization in radical cations, but complexities in cation formation allowed only tentative experimental support of the predictions. The results with anions provide clear evidence for carborane conjugation that might be exploited in molecular wire materials, which are classically composed of all π-conjugated molecules.

Spatial and Lateral Control of Functionality by Rigid Molecular Platforms.

Surface mounted molecular devices have received significant attention in the scientific community because of their unique ability to construct functional materials. The key involves the platform on which the molecular device works on solid substrates, such as in solid-liquid or solid-vacuum interfaces. Here, we outline the concept of rigid molecular platforms to immobilize active functionality atop flat surfaces in a controllable manner. Most of these (multipodal) platforms have at least three anchoring groups to control the spatial arrangement of the protruding functional moieties and form mechanically stable and electronically tuned contacts to the underlying substrate. Another approach is based on employing of flat aromatic scaffolds bearing perpendicular functionalities that form stable lateral assemblies on various surfaces. Emphasis is placed on the need for controllable assembly and separation of these tailor-made molecules that expose functionalities at the molecular scale. The discussions are focused on the different molecular designs realizing functional 3D architectures on surfaces, the role of various anchoring strategies to control the spatial arrangement, and structural considerations controlling physical features like the coupling to the surface or the available space for sterically demanding molecular operations.

Molecular Graph Paper.

We present a self-assembled template that consists of tetraphenylmethane derivatives and adopts a periodic lateral arrangement on a Au(111) surface with acetyl groups sticking out of the molecular film. By using the tip of a scanning tunneling microscope, these acetyl groups can be removed in a spatially controlled way without significantly affecting the remaining molecular assembly. The chemically modified molecules can be readily distinguished from the original ones such that information can be engraved in the molecular film. Both the modified nature of an individual molecule and the order of the molecular film are shown to persist at room temperature. The mesh size of this molecular graph paper can be tuned by varying the length of the molecular spacer so that writing and reading information on the nanoscale with variable letter sizes becomes possible.

Photoisomerization of Bis(tridentate) 2,6-Bis(1H-pyrazol-1-yl)pyridine Ligands Exhibiting a Multi-anthracene Skeleton.

A novel molecular design is described where two peripheral moieties made of 2,6-bis(1H-pyrazol-1-yl)pyridine are linked through multi-1,8-diethynylanthracene moieties. The optimized synthesis of the three isostructural analogues 1 a, 1 b, and 1 c, containing the anthraquinone, anthracene, and 10-methoxyanthracene units, respectively, is reported. The resulting spatial face-to-face arrangement of the peripheral anthracene rings enables to trigger the intramolecular [4+4] photocycloaddition affording the isomers P1 b and P1 c, which can be thermally cleaved back to the original anthracene derivatives 1 b and 1 c, respectively. Single-crystal X-ray diffraction studies confirm the expected molecular structures of compounds 1 a-1 c as well as of their corresponding isomers P1 b and P1 c. The spectral, optical, and electrochemical properties of all synthesized compounds are investigated and discussed.

An electrically actuated molecular toggle switch.

Molecular electronics is considered a promising approach for future nanoelectronic devices. In order that molecular junctions can be used as electrical switches or even memory devices, they need to be actuated between two distinct conductance states in a controlled and reproducible manner by external stimuli. Here we present a tripodal platform with a cantilever arm and a nitrile group at its end that is lifted from the surface. The formation of a coordinative bond between the nitrile nitrogen and the gold tip of a scanning tunnelling microscope can be controlled by both electrical and mechanical means, and leads to a hysteretic switching of the conductance of the junction by more than two orders of magnitude. This toggle switch can be actuated with high reproducibility so that the forces involved in the mechanical deformation of the molecular cantilever can be determined precisely with scanning tunnelling microscopy.

Electrochemical Oxidation of [1-X-12-I-CB11Me10-] Anions: Formation of Borenium Ylides [12-Dehydro-1-X-CB11Me10] and Iodonium Ylide Anions [{12-(1-X-CB11Me10-)}2I+].

Cyclic voltammograms of 12-iodinated icosahedral carborane anions [1-X-12-I-CB11Me10-] (X = H, CH3, C2H5, C3H7, C4H9, C6H13, and COOCH3) show two one-electron anodic oxidation peaks at the Pt electrode in liquid SO2. Oddly, the first is irreversible and the second partially reversible. Mass spectrometry of the principal anionic product of preparative anodic oxidation of [1-H-12-I-CB11Me11-], identical with the anionic product of its reaction with [Et3Si-H-SiEt3]+ and/or Et3Si+, allows it to be identified as the iodonium ylide anion [{12-(1-H-CB11Me10-)}2I+]. Its reversible oxidation to a neutral ylide radical [{12-(1-H-CB11Me10•)}{12-(1-H-CB11Me10-)}I+] is responsible for the second peak. A DFT geometry optimization suggests that both the ylide anion and the ylide radical are very crowded and have an unusually large C-I-C valence angle of ∼132°; they are the first compounds with two bulky highly methylated CB11 cages attached to the same atom. Molecular iodine is another product of the electrolysis. We propose an electrode mechanism in which initial one-electron oxidation of [1-X-12-I-CB11Me10-] is followed by a transfer of an iodine atom from the B-I bond to SO2 to yield a weakly bound radical ISO2• which disproportionates into SO2 and I2. The other product is the borenium ylide [12-dehydro-1-X-CB11Me10], which has a strongly Lewis acidic naked vertex in position 12 that rapidly adds to another [1-X-12-I-CB11Me10-] anion to form the observed stable ylide anion [{12-(1-X-CB11Me10-)}2I+]. In acetonitrile, where it presumably exists as a solvent adduct, [12-dehydro-1-X-CB11Me10] has been trapped with H2O and, to a small extent, with MeOH, but not with several other potential trapping agents.

Importance of the Anchor Group Position (Para versus Meta) in Tetraphenylmethane Tripods: Synthesis and Self-Assembly Features.

The efficient synthesis of tripodal platforms based on tetraphenylmethane with three acetyl-protected thiol groups in either meta or para positions relative to the central sp(3) carbon for deposition on Au (111) surfaces is reported. These platforms are intended to provide a vertical arrangement of the substituent in position 4 of the perpendicular phenyl ring and an electronic coupling to the gold substrate. The self-assembly features of both derivatives are analyzed on Au (111) surfaces by low-temperature ultra-high-vacuum STM, high-resolution X-ray photoelectron spectroscopy, near-edge X-ray absorption fine structure spectroscopy, and reductive voltammetric desorption studies. These experiments indicated that the meta derivative forms a well-ordered monolayer, with most of the anchoring groups bound to the surface, whereas the para derivative forms a multilayer film with physically adsorbed adlayers on the chemisorbed para monolayer. Single-molecule conductance values for both tripodal platforms are obtained through an STM break junction experiment.

Rigid multipodal platforms for metal surfaces.

In this review the recent progress in molecular platforms that form rigid and well-defined contact to a metal surface are discussed. Most of the presented examples have at least three anchoring units in order to control the spatial arrangement of the protruding molecular subunit. Another interesting feature is the lateral orientation of these foot structures which, depending on the particular application, is equally important as the spatial arrangement of the molecules. The numerous approaches towards assembling and organizing functional molecules into specific architectures on metal substrates are reviewed here. Particular attention is paid to variations of both, the core structures and the anchoring groups. Furthermore, the analytical methods enabling the investigation of individual molecules as well as monomolecular layers of ordered platform structures are summarized. The presented multipodal platforms bearing several anchoring groups form considerably more stable molecule-metal contacts than corresponding monopodal analogues and exhibit an enlarged separation of the functional molecules due to the increased footprint, as well as restrict tilting of the functional termini with respect to the metal surface. These platforms are thus ideally suited to tune important properties of the molecule-metal interface. On a single-molecule level, several of these platforms enable the control over the arrangement of the protruding rod-type molecular structures (e.g., molecular wires, switches, rotors, sensors) with respect to the surface of the substrate.