ABSTRACT
BACKGROUND AND OBJECTIVE: This paper presents the quantitative comparison of three generative models of digital staining, also known as virtual staining, in H&E modality (i.e., Hematoxylin and Eosin) that are applied to 5 types of breast tissue. Moreover, a qualitative evaluation of the results achieved with the best model was carried out. This process is based on images of samples without staining captured by a multispectral microscope with previous dimensional reduction to three channels in the RGB range. METHODS: The models compared are based on conditional GAN (pix2pix) which uses images aligned with/without staining, and two models that do not require image alignment, Cycle GAN (cycleGAN) and contrastive learning-based model (CUT). These models are compared based on the structural similarity and chromatic discrepancy between samples with chemical staining and their corresponding ones with digital staining. The correspondence between images is achieved after the chemical staining images are subjected to digital unstaining by means of a model obtained to guarantee the cyclic consistency of the generative models. RESULTS: The comparison of the three models corroborates the visual evaluation of the results showing the superiority of cycleGAN both for its larger structural similarity with respect to chemical staining (mean value of SSIM â¼ 0.95) and lower chromatic discrepancy (10%). To this end, quantization and calculation of EMD (Earth Mover's Distance) between clusters is used. In addition, quality evaluation through subjective psychophysical tests with three experts was carried out to evaluate quality of the results with the best model (cycleGAN). CONCLUSIONS: The results can be satisfactorily evaluated by metrics that use as reference image a chemically stained sample and the digital staining images of the reference sample with prior digital unstaining. These metrics demonstrate that generative staining models that guarantee cyclic consistency provide the closest results to chemical H&E staining that also is consistent with the result of qualitative evaluation by experts.
Subject(s)
Deep Learning , Microscopy , Staining and Labeling , Benchmarking , Eosine Yellowish-(YS) , Image Processing, Computer-AssistedABSTRACT
BACKGROUND AND OBJECTIVE: Training a deep convolutional neural network (CNN) for automatic image classification requires a large database with images of labeled samples. However, in some applications such as biology and medicine only a few experts can correctly categorize each sample. Experts are able to identify small changes in shape and texture which go unnoticed by untrained people, as well as distinguish between objects in the same class that present drastically different shapes and textures. This means that currently available databases are too small and not suitable to train deep learning models from scratch. To deal with this problem, data augmentation techniques are commonly used to increase the dataset size. However, typical data augmentation methods introduce artifacts or apply distortions to the original image, which instead of creating new realistic samples, obtain basic spatial variations of the original ones. METHODS: We propose a novel data augmentation procedure which generates new realistic samples, by combining two samples that belong to the same class. Although the idea behind the method described in this paper is to mimic the variations that diatoms experience in different stages of their life cycle, it has also been demonstrated in glomeruli and pollen identification problems. This new data augmentation procedure is based on morphing and image registration methods that perform diffeomorphic transformations. RESULTS: The proposed technique achieves an increase in accuracy over existing techniques of 0.47%, 1.47%, and 0.23% for diatom, glomeruli and pollen problems respectively. CONCLUSIONS: For the Diatom dataset, the method is able to simulate the shape changes in different diatom life cycle stages, and thus, images generated resemble newly acquired samples with intermediate shapes. In fact, the other methods compared obtained worse results than those which were not using data augmentation. For the Glomeruli dataset, the method is able to add new samples with different shapes and degrees of sclerosis (through different textures). This is the case where our proposed DA method is more beneficial, when objects highly differ in both shape and texture. Finally, for the Pollen dataset, since there are only small variations between samples in a few classes and this dataset has other features such as noise which are likely to benefit other existing DA techniques, the method still shows an improvement of the results.
Subject(s)
Data Management , Neural Networks, Computer , Databases, Factual , HumansABSTRACT
An automatic "museum audio guide" is presented as a new type of audio guide for museums. The device consists of a headset equipped with a camera that captures exhibit pictures and the eyes of things computer vision device (EoT). The EoT board is capable of recognizing artworks using features from accelerated segment test (FAST) keypoints and a random forest classifier, and is able to be used for an entire day without the need to recharge the batteries. In addition, an application logic has been implemented, which allows for a special highly-efficient behavior upon recognition of the painting. Two different use case scenarios have been implemented. The main testing was performed with a piloting phase in a real world museum. Results show that the system keeps its promises regarding its main benefit, which is simplicity of use and the user's preference of the proposed system over traditional audioguides.
ABSTRACT
Embedded systems control and monitor a great deal of our reality. While some "classic" features are intrinsically necessary, such as low power consumption, rugged operating ranges, fast response and low cost, these systems have evolved in the last few years to emphasize connectivity functions, thus contributing to the Internet of Things paradigm. A myriad of sensing/computing devices are being attached to everyday objects, each able to send and receive data and to act as a unique node in the Internet. Apart from the obvious necessity to process at least some data at the edge (to increase security and reduce power consumption and latency), a major breakthrough will arguably come when such devices are endowed with some level of autonomous "intelligence". Intelligent computing aims to solve problems for which no efficient exact algorithm can exist or for which we cannot conceive an exact algorithm. Central to such intelligence is Computer Vision (CV), i.e., extracting meaning from images and video. While not everything needs CV, visual information is the richest source of information about the real world: people, places and things. The possibilities of embedded CV are endless if we consider new applications and technologies, such as deep learning, drones, home robotics, intelligent surveillance, intelligent toys, wearable cameras, etc. This paper describes the Eyes of Things (EoT) platform, a versatile computer vision platform tackling those challenges and opportunities.
ABSTRACT
Automatic detection systems usually require large and representative training datasets in order to obtain good detection and false positive rates. Training datasets are such that the positive set has few samples and/or the negative set should represent anything except the object of interest. In this respect, the negative set typically contains orders of magnitude more images than the positive set. However, imbalanced training databases lead to biased classifiers. In this paper, we focus our attention on a negative sample selection method to properly balance the training data for cascade detectors. The method is based on the selection of the most informative false positive samples generated in one stage to feed the next stage. The results show that the proposed cascade detector with sample selection obtains on average better partial AUC and smaller standard deviation than the other compared cascade detectors.
Subject(s)
Artificial Intelligence , Computational Biology/methods , Pattern Recognition, Automated/methods , Algorithms , Area Under Curve , Breast Neoplasms/diagnosis , Databases, Factual , Facial Recognition , False Positive Reactions , Female , Humans , Mammography/methods , Pedestrians , ROC Curve , Radiographic Image Interpretation, Computer-AssistedABSTRACT
The field of anatomic pathology has experienced major changes over the last decade. Virtual microscopy (VM) systems have allowed experts in pathology and other biomedical areas to work in a safer and more collaborative way. VMs are automated systems capable of digitizing microscopic samples that were traditionally examined one by one. The possibility of having digital copies reduces the risk of damaging original samples, and also makes it easier to distribute copies among other pathologists. This article describes the development of an automated high-resolution whole slide imaging (WSI) system tailored to the needs and problems encountered in digital imaging for pathology, from hardware control to the full digitization of samples. The system has been built with an additional digital monochromatic camera together with the color camera by default and LED transmitted illumination (RGB). Monochrome cameras are the preferred method of acquisition for fluorescence microscopy. The system is able to digitize correctly and form large high resolution microscope images for both brightfield and fluorescence. The quality of the digital images has been quantified using three metrics based on sharpness, contrast and focus. It has been proved on 150 tissue samples of brain autopsies, prostate biopsies and lung cytologies, at five magnifications: 2.5×, 10×, 20×, 40×, and 63×. The article is focused on the hardware set-up and the acquisition software, although results of the implemented image processing techniques included in the software and applied to the different tissue samples are also presented.
Subject(s)
Brain/pathology , Image Processing, Computer-Assisted/methods , Lung/anatomy & histology , Lung/pathology , Microscopy/methods , Prostate/pathology , Automation , Autopsy , Brain/anatomy & histology , Female , Humans , Image Processing, Computer-Assisted/instrumentation , Male , Microscopy/instrumentation , Prostate/anatomy & histology , SoftwareABSTRACT
This paper describes a novel weighted voting tree classification scheme for breast density classification. Breast parenchymal density is an important risk factor in breast cancer. Moreover, it is known that mammogram interpretation is more difficult when dense tissue is involved. Therefore, automated breast density classification may aid in breast lesion detection and analysis. Several classification methods have been compared and a novel hierarchical classification procedure of combined classifiers with linear discriminant analysis (LDA) is proposed as the best solution to classify the mammograms into the four BIRADS tissue classes. The classification scheme is based on 298 texture features. Statistical analysis to test the normality and homoscedasticity of the data was carried out for feature selection. Thus, only features that are influenced by the tissue type were considered. The novel classification techniques have been incorporated into a CADe system to drive the detection algorithms and tested with 1459 images. The results obtained on the 322 screen-film mammograms (SFM) of the mini-MIAS dataset show that 99.75% of samples were correctly classified. On the 1137 full-field digital mammograms (FFDM) dataset results show 91.58% agreement. The results of the lesion detection algorithms were obtained from modules integrated within the CADe system developed by the authors and show that using breast tissue classification prior to lesion detection leads to an improvement of the detection results. The tools enhance the detectability of lesions and they are able to distinguish their local attenuation without local tissue density constraints.
Subject(s)
Breast Neoplasms/diagnostic imaging , Diagnosis, Computer-Assisted/standards , False Positive Reactions , Mammography , Breast Neoplasms/classification , Female , Humans , Radiographic Image Enhancement/standardsABSTRACT
The latest technological advances and information support systems for clinics and hospitals produce a wide range of possibilities in the storage and retrieval of an ever-growing amount of clinical information as well as in detection and diagnosis. In this work, an Electronic Health Record (EHR) combined with a Computer Aided Detection (CADe) system for breast cancer diagnosis has been implemented. Our objective is to provide to radiologists a comprehensive working environment that facilitates the integration, the image visualization, and the use of aided tools within the EHR. For this reason, a development methodology based on hardware and software system features in addition to system requirements must be present during the whole development process. This will lead to a complete environment for displaying, editing, and reporting results not only for the patient information but also for their medical images in standardised formats such as DICOM and DICOM-SR. As a result, we obtain a CADe system which helps in detecting breast cancer using mammograms and is completely integrated into an EHR.
Subject(s)
Breast Neoplasms/diagnosis , Electronic Health Records , Information Storage and Retrieval , Software , Breast Neoplasms/pathology , Female , HumansABSTRACT
Grid technology has enabled clustering and access to, and interaction among, a wide variety of geographically distributed resources such as supercomputers, storage systems, data sources, instruments as well as special devices and services, realizing network-centric operations. Their main applications include large scale computational and data intensive problems in science and engineering. Grids are likely to have a deep impact on health related applications. Moreover, they seem to be suitable for tissue-based diagnosis. They offer a powerful tool to deal with current challenges in many biomedical domains involving complex anatomical and physiological modeling of structures from images or large image databases assembling and analysis. This chapter analyzes the general structures and functions of a Grid environment implemented for tissue-based diagnosis on digital images. Moreover, it presents a Grid middleware implemented by the authors for diagnostic pathology applications. The chapter is a review of the work done as part of the European COST project EUROTELEPATH.