Electromyographic analysis of selected shoulder muscles during shoulder rehabilitation exercises in patients after reversed shoulder arthroplasty.

BACKGROUND: Reversed shoulder arthroplasty (RSA) aims to restore function in patients with rotator cuff failure and joint arthropathy. After surgery, patients are routinely referred to a rehabilitation specialist to regain range of motion, strength, and function. A key element in these programs is active exercises. The exercises are often selected based on assumed muscle activity, investigated by electromyography (EMG). In particular, in this patient population, activation of the deltoid and the scapular muscles is the focus of exercise therapy. Currently, most studies investigating muscle activity levels during exercises are performed on healthy individuals. To our knowledge, no study exists analyzing EMG activity during exercises in a population of shoulder arthroplasty patients. Therefore, the study aimed to analyze activity in the shoulder girdle muscles during 6 commonly used rehabilitation exercises 12 weeks after RSA surgery. METHODS: Forty-four patients (50 shoulders) participated in this cross-sectional study, 12 weeks postoperatively (mean 99.18±12.8 days), aged 68.9±7.75 years. Surface EMG activity was measured in 10 shoulder girdle muscles: the 3 trapezius parts, serratus anterior, the 3 deltoid parts, latissimus dorsi, and 2 pectoralis major parts during 6 exercises, 3 in a closed chain, and 3 open chain elevation exercises. RESULTS: Gravity- minimized exercises (horizontal plane) show low activity for almost all muscles. Vertical closed kinetic chain exercises show an increased activity compared to horizontal plane exercises. Open kinetic chain exercises against gravity showed the greatest activity in Deltoid and Upper trapezius. For the other muscles no consistency in progression was found. CONCLUSION: This study offers a progression of exercises for patients after reversed shoulder arthroplasty based on increased muscle activity.

Serial 3D CT analysis of humeral head alignment in relation to glenoid correction and outcomes after total shoulder arthroplasty.

Background: Posterior humeral head (HH) subluxation after anatomic total shoulder arthroplasty (aTSA) is associated with worse outcomes, but it is unclear how corrective glenoid reaming correlates with HH alignment and whether HH alignment changes over time. Therefore, it was aimed to analyze the relationship between HH alignment and the scapula following aTSA to identify anatomic and surgical factors that contribute to realignment of the HH, glenoid loosening, and clinical outcomes. Methods: Three-dimensional scapulohumeral alignment was assessed on three-dimensionally reconstructed computed tomography scans of 23 patients: preoperative (T0), 2 years post-aTSA (T1), and ≥5 years post-aTSA (T2). Anterior-posterior (AP), superior-inferior (SI), and medial-lateral offset measures of the HH center to the scapula were referenced to the HH diameter (scapulohumeral subluxation index). Glenoid version and inclination were measured at T0 and T1. Central peg osteolysis, rotator cuff fatty infiltration, and vault perforation were assessed on two-dimensional computed tomography. Relative Constant Score at T2 measured clinical outcome. Results: Glenoid correction correlated strongly with AP and SI position of the HH (r = 0.733 and r = 0.797, respectively). Each degree of retroversion correction resulted in 0.9% AP scapulohumeral subluxation index offset change toward anterior. Each degree of inclination correction to superior resulted in a 1.0% offset change toward superior. A gradual postoperative proximal (mean difference [MD], -3%; P = .019), anterior (MD, 2%; P = .025), and medial (MD, 3 mm; P < .001) HH migration was observed. Asymmetric progressive rotator cuff fatty infiltration was associated with the direction of change in AP alignment over time (odds ratio, 2.04; P = .046), with progressive subscapularis fatty infiltration as the primary factor associated with gradual anterior HH translation (odds ratio, 15.61; P = .028). Gradual HH medialization was an indicator of glenoid components at risk for loosening (difference between medians, 4 mm; P = .003). Osteolysis around the central glenoid peg was influenced by overcorrection of glenoid version (MD, 7°; P = .038). Preoperative glenoid inclination was the sole anatomical or surgical factor predicting clinical outcome, as larger inferior inclination at T0 was associated with worse relative Constant Score at T2 (P = .016). Conclusion: Corrective glenoid reaming was an effective surgical technique to correct HH alignment in the AP and SI direction. Gradual anterior HH translation after aTSA was associated with progressive subscapularis fatty infiltration, and substantial HH medialization was an important indicator for potential glenoid loosening. While postoperative glenoid version and AP HH alignment were important for radiographic outcome, preoperative glenoid inclination predicted clinical outcome, as larger preoperative inferior inclination resulted in worse clinical scores.

Demographic heterogeneity in valgus angulation of the proximal ulnar canal in relation to the flexion-extension axis.

BACKGROUND: The long-term outcome of total elbow arthroplasty remains unsatisfactory because of loosening and polyethylene wear, which could be caused by malpositioning of the ulnar component. When introducing an ulnar component, 2 different angles should be considered in the coronal plane: the valgus angulation of the proximal ulna in relation to the flexion-extension axis (FE-axis) and the intramedullary varus angulation in relation to the FE-axis. Currently, available TEA designs may not always be able to reconstruct the FE-axis because of the morphologic variability of the ulna. HYPOTHESIS: This study aimed to determine the demographic variability of the ulna and the relation between the 2 angulations in the frontal plane based on 3-dimentional computed tomography (CT) reconstructions of the elbow joint of healthy volunteers. METHODS: Computed tomography scans of 36 left elbows of healthy volunteers were obtained (20 men and 16 women). The scans were segmented and analyzed using the Mimics Research 20.0 software. A local coordinate system was created based on the FE-axis of the elbow and the ulna's longitudinal axis. The measurements were conducted using the 3-Matic Research 12.0 software. RESULTS: The valgus angulation of the proximal medullary canal was on average 16° in men but 12° in women and ranged between 5° and 21°. The varus angulation of the medullary cavity could be determined at 57 mm in men and 64 mm in women from the FE-axis. This angulation was on average 10° in men and 7° in women. There was no significant correlation between this angle and the length of the ulna or the point of varus angulation. CONCLUSION: This study found a wide range of valgus angulation of the proximal ulnar canal in relation to the FE-axis. The available elbow implant designs are discordant with the mean valgus angulation of the proximal ulna found in this study, and the valgus laxity of the implants does not cover the variability in the population.

Kinematic analysis of scapulothoracic movements in the shoulder girdle: a whole cadaver study.

Background: Existing kinematic studies of the shoulder girdle focus on humerothoracic movements. Isolated scapulothoracic movements are also performed during daily activities and rehabilitation but kinematic values are lacking. Methods: A kinematic analysis was performed in 14 cadaveric shoulders during protraction, retraction, and shrug. An optical navigation system was used to analyze sternoclavicular, scapulothoracic, and acromioclavicular motions. Results: In the sternoclavicular joint, shrug and retraction caused a posterior clavicular rotation of 5° (standard deviation [SD] 6°) and 3° (SD 2°), while protraction induced an anterior rotation of 3° (SD 2°). Shrug caused a large clavicular elevation of 25° (SD 5°). Shrug and retraction caused an increase in retraction of 17° (SD 5°) and 9° (SD 2°). Protraction induced an increase of 10° (SD 2°) toward protraction. In the scapulothoracic joint, shrug induced an increase of 3° (SD 2°) in anterior scapular tilt, and a lateral rotation of 26° (SD 4°). Retraction caused a lateral rotation of 4° (SD 3°). Protraction caused an increase of 7° (SD 2°) in the scapular protraction position, while shrug and retraction demonstrated a decrease of 9° (SD 2°) and 6° (SD 5°). In the acromioclavicular joint, posterior tilting of the scapula compared to the clavicle increased 23° (SD 6°) during shrug, while during protraction an increase of only 4° (SD 3°) was seen. During shrug, relative lateral rotation increased 13° (SD 4°). The protraction movement decreased the relative protraction position with 3° (SD 2°). Conclusion: This study provided normative kinematic values of scapulothoracic movements in the shoulder girdle.

Acromioclavicular reconstruction techniques after acromioclavicular joint injuries: A systematic review of biomechanical studies.

BACKGROUND: Residual horizontal instability after surgical treatment for acromioclavicular joint injuries is seen as a potential cause of suboptimal clinical outcomes. Biomechanical studies have demonstrated that the acromioclavicular capsule/ligaments are the primary restraints for anteroposterior translation. However, limited studies have addressed the biomechanics of a reconstruction of the acromioclavicular capsule/ligaments. The aim of this systematic review was to evaluate the biomechanical role of acromioclavicular capsule/ligament reconstruction techniques after an acromioclavicular joint injury. METHODS: A search was carried out on the databases Medline and EMBASE, and was conducted according to the PRISMA guidelines. Biomechanical studies addressing horizontal and vertical displacement or joint stiffness after reconstructing the acromioclavicular capsule/ligament with or without coracoclavicular ligament reconstruction, were included. FINDINGS: Nineteen studies were included in this review after screening and eligibility assessment. Five of them investigated different sole acromioclavicular capsule/ligament reconstruction techniques. In 10 studies, a sole coracoclavicular ligament reconstruction was compared to a coracoclavicular ligament reconstruction with additional acromioclavicular capsule/ligament reconstruction. The remaining 4 studies compared different acromioclavicular capsule/ligament with coracoclavicular reconstruction techniques with each other. INTERPRETATION: Several testing protocols to evaluate acromioclavicular capsule/ligament reconstruction have been described and can make it difficult to compare the results of the different studies. Acromioclavicular capsule/ligament reconstruction may provide increased anteroposterior and rotational stability but an optimal reconstruction technique, which mimics all biomechanical characteristics of the native joint is not yet available.

Scapular morphology of great apes and humans: A three-dimensional computed tomography-based comparative study.

The primate scapula has been studied widely since its shape has been shown to correlate with how the forelimb is used in daily activities. In this study, we expand on the existing literature and use an image-based methodology that was originally developed for orthopaedic practice to quantify and compare the three-dimensional (3D) morphology of the scapula across humans and great apes. We expect that this image-based approach will allow us to identify differences between great apes and humans that can be related to differences in mobility and loading regime of the shoulder. We hypothesize that gorillas and chimpanzees will have a similar scapular morphology, geared towards stability and weight-bearing in knuckle-walking, whilst the scapular morphology of orangutans is expected to be more similar to that of humans given their high glenohumeral mobility associated with their suspensory lifestyle. We made 3D reconstructions of computed tomography scans of 69 scapulae from four hominid genera (Pongo, Gorilla, Pan and Homo). On these 3D bone meshes, the inferior glenoid plane was determined, and subsequently, a set of bony landmarks on the scapular body, coracoid, and acromion were defined. These landmarks allowed us to measure a set of functionally relevant angles which represent acromial overhang, subacromial space and coracoacromial space. The angles that were measured are: the delto-fulcral triangle (DFT), comprising the alpha, beta, and delta angle, the acromion-glenoid angle (AGA), the coracoid-glenoid centre-posterior acromial angle (CGA), the anterior tilt (TA CGA) and the posterior tilt of the CGA (PT CGA). Three observers placed the landmarks on the 3D bone meshes, allowing us to calculate the inter-observer error. The main differences in the DFT were found between humans and the great apes, with small differences between the great apes. The DFT of humans was significantly lower compared to that of the great apes, with the smallest alpha (32.7°), smallest delta (45.7°) and highest beta angle (101.6°) of all genera. The DFT of chimpanzees was significantly higher compared to that of humans (p < 0.01), with a larger alpha (37.6°) and delta angle (54.5°) and smaller beta angle (87.9°). The mean AGA of humans (59.1°) was significantly smaller (p < 0.001) than that of gorillas (68.8°). The mean CGA of humans (110.1°) was significantly higher (p < 0.001) than in orangutans (92.9°). Humans and gorillas showed mainly a posterior tilt of their coracoacromial complex whilst chimpanzees showed mainly an anterior tilt. The coracoacromial complex of the orangutans was not tilted anteriorly or posteriorly. With our image-based method, we were able to identify morphological features of the scapula that differed significantly between hominid genera. However, we did not find an overall dichotomy in scapular morphology geared towards high stability (Pan/Gorilla) or high mobility (Homo/Pongo). Further research is needed to investigate the functional implications of these differences in scapular morphology.

Biomechanical Evaluation of a Tubular Braided Construct for Primary Deep Flexor Tendon Surgery.

PURPOSE: Immediate postoperative mobilization has been shown to avoid adhesion formation and improve range of motion after flexor tendon repair. A tubular braided construct was designed to allow for these rehabilitation protocols. METHODS: In this ex vivo study, 92 ovine flexor tendons were divided randomly into 2 equal groups. After creating a transection, the tendons of the first group were repaired using a tubular braided construct. This construct, consisting of a tubular braid of polypropylene and polyethylene terephthalate fibers, exerts a grasping effect on the tendon ends. The control group received a multistrand modified Kessler repair with a looped polydioxanone suture (PDS) 4-0 suture and a Silfverskiöld epitendinous repair using an Ethilon 6-0 suture. After the repair, a static and an incremental cyclic tensile test was performed until failure. RESULTS: During the static test, the tubular braid resulted in a significantly higher load at 3 mm gap formation (86.3 N ± 6.0 vs 50.1 N ± 11.6), a higher ultimate load at failure (98.3 N ± 12.7 vs 63 N ± 11.1), higher stress at ultimate load (11.8 MPa ± 1.2 vs 8.1 MPa ± 3.1), and higher stiffness (7.1 N/mm ± 2.9 vs 8.7 N/mm ± 2.2). For the cyclic tests, survival analyses for 1-, 2- and 3-mm gap formation and failure demonstrated significant differences in favor of the tubular braided construct. CONCLUSION: The tubular braided construct withstands the required loads for immediate rehabilitation not only in static tests, but also during cyclic tests. This is in contrast with the control group, where sufficient strength is reached during static tests, but failures occur below the required loads during cyclic testing. CLINICAL RELEVANCE: The tubular braided construct provides a larger safety margin for immediate intensive rehabilitation protocols.

Radial head fractures: a quantitative analysis.

Several classification systems for radial head fractures discuss the number of fragments and their displacement, but not the exact location. This study aimed to evaluate the location of the radial head fracture fragments and the influence of the Mason type on the size of the fracture fragment. Forty-one radial head fractures (31 Mason type I and 10 type II) with an elliptical radial head were included in this retrospective study and 3D reconstructed. First, the fragments were repositioned to their original location. Next, the orientation of the scanned forearm was evaluated using the position of the longest axis relative to the proximal radio-ulnar joint, and all radial heads were rotated to the neutral rotation. The radial head was divided into 4 quadrants (anteromedial, anterolateral, posteromedial, and posterolateral). The location of the fracture line in correlation with these 4 quadrants was evaluated. All fracture fragments were located in the anteromedial quadrant. Thirty-eight (93%) were located in the anterolateral quadrant. The posterolateral quadrant was involved in 32%. At last, the average fracture fragment size was evaluated according to the Mason classification. A significant difference was found in the average fracture fragment size between Mason type I (38% of the radial head surface) and type II (48% of the radial head surface). It was concluded that there is an important involvement of the anterior quadrants of the fracture. The mean size of the fracture is significantly larger in Mason type II compared to type I.

Differences between Coracoclavicular, Acromioclavicular, or Combined Reconstruction Techniques on the Kinematics of the Shoulder Girdle.

BACKGROUND: Although the coracoclavicular (CC) ligaments are classically reconstructed after acromioclavicular (AC) joint injuries, biomechanical studies over the past decade have indicated the importance of an additional reconstruction of the AC ligaments. To date, no kinematic study has investigated the kinematic differences between these reconstruction strategies. PURPOSE: To evaluate the restoration of shoulder motion after an AC injury using a CC ligament, an AC ligament, or a combined reconstruction technique. STUDY DESIGN: Controlled laboratory study. METHODS: After creating a Rockwood grade V lesion in 14 cadaveric shoulders, the AC joint injury was treated with either a CC ligament reconstruction using a suspension device, an in situ AC ligament reconstruction using 2 coupled soft tissue anchors, or a combination of these 2 techniques. Joint motions were registered during humerothoracic elevation in the coronal plane and protraction in the intact shoulder in a Rockwood V lesion and after the 3 reconstruction strategies. An optical navigation system measured 3-dimensional rotation in the sternoclavicular and scapulothoracic joints, and both rotation and translation were analyzed in the AC joint. RESULTS: In the sternoclavicular joint, the CC and combined reconstruction techniques adequately restored clavicular axial rotation, while the AC reconstruction technique showed a better correction of clavicular elevation. Scapulothoracic joint rotations were best restored by reconstructing the AC ligaments. In the AC joint, the relative tilting position and the lateral rotation of the scapula compared with the clavicle were best restored by the suspension device and combined reconstruction. The AC ligament reconstruction technique demonstrated a better restoration of the relative protracted position and resulted in a better correction of the translation of the scapula relative to the clavicle. CONCLUSION: This study illustrates that there are kinematic differences between AC, CC, or combined ligament reconstruction strategies. Although each technique was able to restore different elements of the joint kinematics, none of the strategies completely restored the shoulder girdle to its preinjured state. CLINICAL RELEVANCE: Humerothoracic movements after Rockwood V lesions are best restored using the CC reconstruction technique, and scapulothoracic movements are best restored using the AC ligament reconstruction technique.

A novel plating technique for Ideberg type 1 A glenoid fractures: a report of five patients.

BACKGROUND: Glenoid rim fractures are uncommon and generally associated with high complication rates. The most common treatment techniques include screw or anchor fixation. Here, we introduce a new fixation method to treat Ideberg type 1 A fractures. METHODS: A retrospective analysis was performed on patients treated with open reduction and plate fixation for Ideberg type 1 A fractures. The active range of motion capacity of both shoulders was recorded postoperatively. Constant-Murley score and Oxford disability index scores were used as outcome tools. RESULTS: Five patients (three men and two women) were evaluated; their mean age was 56 years (standard deviation (SD), 10 years). The mean follow-up period was 25 months (range, 6-69 months); all fractures healed radiologically during the follow-up period. The mean Constant-Murley score was 80.36 (SD 11.01); the mean Oxford disability index was 37 (SD 9). The subsequent flexion and external rotation of the injured shoulders were similar to those of the uninjured side (injured vs. uninjured side: flexion, 176 ± 5.4 vs. 178 ± 4.4; external rotation, 48 ± 10.9 vs. 60 ± 0). No patient showed signs of osteoarthritis, stiffness, instability, or chronic pain at the last follow-up. DISCUSSION: Open reduction and internal fixation with a plate is suitable for Ideberg type 1A glenoid fractures.

Hyaluronic acid as an alternative treatment option for degenerative rotator cuff tears.

Rotator cuff tears have a high prevalence in older people. This research examines the clinical outcome of the non-operative treatment of symptomatic degenerative rotator cuff tears with hyaluronic acid (HA) injections. 72 patients (43 females/29 males), with an average age of 66 years with symptomatic degenerative full- thickness rotator cuff tear, confirmed with arthro-CT, were treated with three intra-articular hyaluronic acid injections and followed on multiple observational moments during a 5-year follow-up using the SF- 36 (Short-Form Health Survey), DASH (Disabilities of the Arm, Shoulder, and Hand), CMS (Constant Murley Score), and OSS (Oxford Shoulder Scale. 54 patients completed the 5-year follow-up questionnaire. 77% of the patients did not require additional treatment for their shoulder pathology, and 89% were treated conservatively. Only 11% of the patients included in this study needed surgery. Between subjects, the analysis revealed a significant difference in response in the DASH (p=0.015) and CMS (p=0.033) when the subscapularis muscle was involved. Intra-articular infiltrations with hyaluronic acid improve pain and shoulder function, especially if the subscapularis muscle is not involved.

Flexor tendon repair using a reinforced tubular, medicated electrospun construct.

A reinforced tubular, medicated electrospun construct was developed for deep flexor tendon repair. This construct combines mechanical strength with the release of anti-inflammatory and anti-adhesion drugs. In this study, the reinforced construct was evaluated using a rabbit model. It was compared to its components (a tubular, medicated electrospun polymer without reinforcement and a tubular braid as such) on the one hand to a modified Kessler suture as a control group. Forty New Zealand rabbits were randomly divided into two groups. Surgery was performed in the second and fourth deep flexor tendons of one hind paw of the rabbits in the two groups using four repair techniques. Biomechanical tensile testing and macroscopic and histological evaluations were performed at 3 and 8 weeks postoperatively. A two-way analysis of variance with pairwise comparisons revealed that the three experimental surgical techniques (a reinforced tubular medicated electrospun construct, tubular-medicated construct, and tubular braid as such) showed similar strength as that of a modified Kessler suture repair, which was characterized by a mean load at ultimate failure of 19.85 N (standard deviation [SD] 5.29 N) at 3 weeks and 18.15 N (SD 8.01 N) at 8 weeks. Macroscopically, a significantly different adhesion pattern was observed at the suture knots, either centrally or peripherally, depending on the technique. Histologically, a qualitative assessment showed good to excellent repair at the tendon repair site, irrespective of the applied technique. This study demonstrates that mechanical and biological repair strategies for flexor tendon repair can be successfully combined.

Limited value of current shoulder arthroplasty registries in evidence-based shoulder surgery: a review of 7 national registries.

National shoulder arthroplasty registries are currently used to assess incidence, indication, type of prosthesis and revision, but they seem to lack sufficient information to lead to evidence based decision-making in shoulder surgery. There appears to be a large difference in registered parameters and outcome measurement per country. First we investigated whether existing registries have sufficient common datasets to enable pooling of data. Second, we determined whether known risk factors for prosthetic failure are being recorded. Through a non-systematic literature review studies on registries were analyzed for included parameters. Seven national registries were scrutinized for the data collected and these were classified according to categories of risk factors for failure: patient-, implant and surgeon related, and other parameters. This shows a large heterogeneity of registered parameters between countries. The majority of parameters shown to be relevant to outcome and failure of shoulder prostheses are not included in the studied registries. International agreement on parameters and outcome measurement for registries is paramount to enable pooling and comparison of data. If we intend to use the registries to provide us with evidence to improve prosthetic shoulder surgery, we need adjustment of the different parameters to be included.

Fracture patterns in midshaft clavicle fractures.

Current classifications of midshaft clavicle fractures are based on radiography. The aim of the study was to evaluate the fracture pattern of clavicle fractures using 3-dimensional computed tomography (3D CT). A retrospective analysis was performed on CT scans of 65 acute clavicle fractures. Using quantitative 3D CT reconstruction techniques, the fracture of the clavicle was virtually reduced. Based on these reconstructions, a group-based fracture heat map and small fragment heat map, and the location of the most common fracture line were determined. Also, the direction and amount of displacement were evaluated. Three fracture patterns could be distinguished. The primary fracture line in type 1 is going from posteromedial to anterolateral and located between 50% and 68% of the clavicle's length. In type 2, a transverse fracture line is located around 55%, and in type 3, a superolateral to inferomedial line is located between 47% and 56%. Wedged fracture fragments can be seen in types 1 and 2 and are mainly situated inferiorly. The displacement is similar in all types, but the main direction of displacement is specific for the different types (posterior, anterior, inferior). We can conclude that several fracture patterns can be seen in clavicle fractures. Most fractures are located laterally at the midshaft of the clavicle. Wedged segments are mainly located inferiorly, and at the posterior part of the clavicle, no comminution is ever seen. The direction of displacement depends on the fracture pattern.

Kinematic Alterations in the Shoulder Complex in Rockwood V Acromioclavicular Injuries During Humerothoracic and Scapulothoracic Movements: A Whole-Cadaver Study.

BACKGROUND: Previous cadaveric kinematic studies on acromioclavicular injuries described mainly rotational differences during humerothoracic movements. Although isolated scapulothoracic movements are also often performed during activities of daily life and can be painful after acromioclavicular injuries, they have not been extensively studied. Further, the analysis of joint translations in kinematic studies has received little attention compared with biomechanical studies. HYPOTHESIS: A kinematic analysis of joint motions in the intact shoulder versus a shoulder with Rockwood V injury would demonstrate a different pattern of kinematic alterations during humerothoracic and scapulothoracic movements. STUDY DESIGN: Descriptive laboratory study. METHODS: A kinematic analysis was performed in 14 cadaveric shoulders during 3 humerothoracic passive movements (coronal and sagittal plane elevation and horizontal adduction) and 3 scapulothoracic passive movements (protraction, retraction, and shrug). An optical navigation system registered rotational motions in the sternoclavicular, scapulothoracic, and acromioclavicular joints in the intact and Rockwood V conditions. In the acromioclavicular joint, mediolateral, anteroposterior, and superoinferior translations were also analyzed. RESULTS: In the Rockwood V condition, a significant increase in clavicular elevation in the sternoclavicular joint during both humerothoracic and scapulothoracic movements was demonstrated, whereas a significant decrease in posterior rotation of the clavicle occurred only during humerothoracic movements. In the scapulothoracic joint, the scapular position changed most significantly during protraction. In the acromioclavicular joint, the scapular tilting position was altered significantly during both humerothoracic and scapulothoracic movements, whereas the scapular rotational position changed only during coronal and sagittal plane elevation. The largest significant changes in the scapular protraction position were seen during protraction movement. Further, in the acromioclavicular joint there was a significant inferior translation of the scapula during all motions, a significant anterior translation during protraction and horizontal adduction, and a significant posterior translation during coronal plane elevation. Mediolaterally, the acromial end of the scapula slid further under the distal clavicle during protraction than during horizontal adduction. CONCLUSION: Large kinematic differences were seen between the intact state and a Rockwood V lesion not only during humerothoracic movements but also during scapulothoracic movements in the cadaveric model. During humerothoracic movements, rotational differences were mainly caused by alterations in the clavicular position. In contrast, during protraction, the alterations in the scapular position were the dominant factor. CLINICAL RELEVANCE: This study demonstrates that protraction induces larger kinematic alterations than horizontal adduction in acromioclavicular injuries and can therefore be included in both clinical examination and kinematic analyses to identify lesions more clearly.

The management of chronic paediatric Monteggia fracture-dislocation.

BACKGROUND: Monteggia fracture-dislocation is a rare and often missed injury in the paediatric population. The neglected radial head dislocation might go unnoticed for several months, but usually becomes symptomatic at a certain point in time, posing a complex clinical problem. Management strategies for chronic Monteggia lesions have been proposed by many authors. A consensus therapy is nonetheless lacking. In recent years an increasing number of case series reporting the outcomes of various treatment options have been published to gain insight into this challenging pathology. The purpose of this review is to provide a general background on chronic, paediatric Monteggia fracture-dislocation, followed by a systematic analysis and discussion of various management strategies and their outcomes, described in recent outcome studies. METHODS: A literature search was conducted within the online databases PubMed, Cochrane Central, EMBASE and Google Scholar, to identify outcome studies on the management of chronic Monteggia lesions published between January 2015 and April 2020. A total of 23 outcome studies were identified and included in this study. RESULTS: Obtaining stable radial head reduction can be regarded as the main objective of any management strategy for chronic, paediatric Monteggia fracture-dislocation. In recent literature, many surgical techniques have been put forward to obtain this goal, with the mainstay of most treatment strategies being ulnar osteotomy and open reduction with or without reconstruction of the annular ligament. Watchful neglect is a strategy that got more or less abandoned and is challenged in recent literature. CONCLUSIONS: Due to the complexity of long-standing radial head dislocation and the unpredictability of outcomes in the treatment of chronic Monteggia lesions, early diagnosis and achieving a stable reduction, preferably in the acute setting, are paramount. Because of the tendency to obtain more satisfactory radiological and clinical results in younger patients, with a short injury-to-surgery interval, it is advisable to promptly proceed to surgical treatment when chronic Monteggia fracture-dislocation is diagnosed.

Biological activity and antimicrobial property of Cu/a-C:H nanocomposites and nanolayered coatings on titanium substrates.

Infection associated with titanium based implants remains the most serious problem in implant surgery hence it is important to find optimal strategies to prevent infections. In the present study, we investigated the surface properties, antibacterial activity and biocompatibility of nanocomposite coatings based on an amorphous hydrocarbon (a-C:H) film containing copper nanoparticles (CuNPs) deposited on Ti discs via a gas aggregation cluster source. Three different Cu/a-C:H coatings with approximately the same amount of embedded CuNPs with and without barrier a-C:H layer were fabricated. The obtained results revealed that different structures of the produced coatings have significantly different release rates of Cu ions from the coatings into the aqueous media. This subsequently influences the antibacterial efficiency and osteoblast cell viability of the treated coatings. Coatings with the highest number of CuNPs resulted in excellent antibacterial activity exhibiting approximately 4 log reduction of E.coli and S.aureus after 24 h incubation. The cytotoxicity study revealed that after 7 day cell seeding, even the coating with the highest Cu at.% (4 at.%) showed a cell viability of Ì´90%. Consequently, the coating, formed with a properly tailored number of CuNPs and a-C:H barrier thickness offer a strong antibacterial effect without any harm to osteoblast cells.

Is bone grafting always necessary in revision reverse total shoulder arthroplasty with uncontained glenoid bone defects?

BACKGROUND: Patients with an uncontained glenoid bone defect can still successfully undergo a reverse total shoulder arthroplasty (RTSA). Currently, there is a tendency toward reconstruction of the premorbid glenoid plane with bone grafts, which is technically demanding. We investigated whether central peg positioning in the spine pillar (CPPSP) is a more feasible alternative to the use of bone grafts. METHODS: This study included 60 revisions to an RTSA with uncontained glenoid bone defects. Patients were treated with bone grafts in 29 cases and with the CPPSP technique in 31 cases. We assessed clinical results using the Constant score and assessed the complication rate. RESULTS: The Constant score changed from 42 to 69 points in the CPPSP group and from 47 to 60 points in the bone graft group. This difference in the increase in the Constant score was significant (P = .031) owing to a significant difference in strength in favor of the CPPSP group. The overall complication rate was 37.7% (20 of 53 patients), with a reoperation rate of 18.9% (10 of 53). Dislocations occurred only in the CPPSP group (n = 3), and loosening of the glenoid occurred only in the bone graft group (n = 3). CONCLUSION: Patients with uncontained glenoid bone defects undergoing revision to an RTSA obtain similar clinical results with the CPPSP technique compared with the use of bone grafts. The CPPSP technique is a valid alternative but results in different complications.

Three-dimensional evaluation of scapular morphology in primary glenohumeral arthritis, rotator cuff arthropathy, and asymptomatic shoulders.

BACKGROUND: Recently, the 3-dimensional (3D) morphology of the coracoacromial complex in nonpathologic shoulders has been described. The aim of this study was to evaluate and compare the coracoacromial complex in pathologic shoulders (glenohumeral osteoarthritis [GHOA] and cuff tear arthropathy [CTA]) and nonpathologic shoulders. METHODS: A 3D computed tomography reconstruction of 205 scapulae was performed (49 with GHOA, 48 with CTA, and 108 in normal shoulders [NL]). Subsequently, the center of the glenoid circle and several points at the coracoid, acromion, and glenoid were determined. The distances between these points and the rotation of the coracoacromial complex were calculated, and the acromion-glenoid angle was measured. RESULTS: The acromial overhang was significantly different between the NL (37 mm) and CTA (35 mm) groups (P = .045), as well as between the CTA and GHOA groups (33 mm) (P = .010). The acromion-glenoid angle showed a significant difference between the NL (mean, 50°) and GHOA (mean, 42°) groups (P < .001) and between the CTA (mean, 50°) and GHOA groups (P < .001). Furthermore, a significant difference was found in the acromial height, which was larger in the GHOA group (36 mm) than in the CTA group (30 mm) (P < .001) or NL group (30 mm) (P < .001). CONCLUSION: This 3D morphologic study showed that the acromial part of the complex was turned more posteriorly in both pathologic groups. Furthermore, we found the coracoacromial complex to be more cranial to the glenoid center in the GHOA group. Finally, a significant difference in the lateral overhang of the coracoacromial complex was observed between the 3 groups. The NL group had a larger overhang than the CTA group, and the CTA group in turn had a larger overhang than the GHOA group.