A green and bio-inspired process to afford durable anti-biofilm properties to stainless steel.

A bio-inspired durable anti-biofilm coating was developed for industrial stainless steel (SS) surfaces. Two polymers inspired from the adhesive and cross-linking properties of mussels were designed and assembled from aqueous solutions onto SS surfaces to afford durable coatings. Trypsin, a commercially available broad spectrum serine protease, was grafted as the final active layer of the coating. Its proteolytic activity after long immersion periods was demonstrated against several substrata, viz. a synthetic molecule, N-α-benzoyl-DL-arginine-p-nitroanilide hydrochloride (BAPNA), a protein, FTC-casein, and Gram-positive biofilm forming bacterium Staphylococcus epidermidis.

Biomolecule-based antibacterial coating on a stainless steel surface: multilayer film build-up optimization and stability study.

The goal of this paper was to establish the durability profile of antibacterial multilayer thin films under storage and usage conditions. Thin films were built on stainless steel (SS) by means of a layer-by-layer process alternating a negatively charged polyelectrolyte, polyacrylic acid, with a cationic antibacterial peptide, nisin. SS coupons coated with the antibacterial film were challenged under environmental and usage conditions likely to be encountered in real-world applications. The change in antibacterial activity elicited by the challenge was used as an indicator of multilayer film resistance. Antibacterial SS samples could be stored for several weeks at 4°C in ambient air and antibacterial films were resistant to dipping and mild wiping in water and neutral detergent. The multilayer coating showed some weaknesses, however, that need to be addressed.

Biomolecules in multilayer film for antimicrobial and easy-cleaning stainless steel surface applications.

Microorganisms are able to attach to, grow on, and ultimately form biofilms on a large variety of surfaces, such as industrial equipment, food contact surfaces, medical implants, prostheses and operating rooms. Once organized into biofilms, bacteria are difficult to remove and kill, which increases the risk of cross-contamination and infection. One way to address the problem may thus be to develop antibacterial, anti-adhesion, 'easy cleaning' surfaces. In this study, stainless steel (SS) surfaces with antibacterial properties were created by embedding several antimicrobial peptides in a multilayer film architecture. The biocidal effect of these surfaces was demonstrated against both Gram-positive and Gram-negative bacteria according to two ISO tests. Also, coating SS surfaces with either mucin or heparin led to a reduction of S. epidermidis adhesion of almost 95% vs the bare substratum. Finally, by combining both antibacterial and anti-adhesion biomolecules in the same multilayer film, SS surfaces with better cleanability were produced. This surface coating property may help to delay the buildup of a dead bacterial layer which is known to progressively reduce exposure of the coating, leading to an undesirable decrease in the antibacterial effect of the surface.

De novo backbone and sequence design of an idealized alpha/beta-barrel protein: evidence of stable tertiary structure.

We have designed, synthesized, and characterized a 216 amino acid residue sequence encoding a putative idealized alpha/beta-barrel protein. The design was elaborated in two steps. First, the idealized backbone was defined with geometric parameters representing our target fold: a central eight parallel-stranded beta-sheet surrounded by eight parallel alpha-helices, connected together with short structural turns on both sides of the barrel. An automated sequence selection algorithm, based on the dead-end elimination theorem, was used to find the optimal amino acid sequence fitting the target structure. A synthetic gene coding for the designed sequence was constructed and the recombinant artificial protein was expressed in bacteria, purified and characterized. Far-UV CD spectra with prominent bands at 222nm and 208nm revealed the presence of alpha-helix secondary structures (50%) in fairly good agreement with the model. A pronounced absorption band in the near-UV CD region, arising from immobilized aromatic side-chains, showed that the artificial protein is folded in solution. Chemical unfolding monitored by tryptophan fluorescence revealed a conformational stability (DeltaG(H2O)) of 35kJ/mol. Thermal unfolding monitored by near-UV CD revealed a cooperative transition with an apparent T(m) of 65 degrees C. Moreover, the artificial protein did not exhibit any affinity for the hydrophobic fluorescent probe 1-anilinonaphthalene-8-sulfonic acid (ANS), providing additional evidence that the artificial barrel is not in the molten globule state, contrary to previously designed artificial alpha/beta-barrels. Finally, 1H NMR spectra of the folded and unfolded proteins provided evidence for specific interactions in the folded protein. Taken together, the results indicate that the de novo designed alpha/beta-barrel protein adopts a stable three-dimensional structure in solution. These encouraging results show that de novo design of an idealized protein structure of more than 200 amino acid residues is now possible, from construction of a particular backbone conformation to determination of an amino acid sequence with an automated sequence selection algorithm.

Transcription of the human prolactin gene in mammary cells.

Expression of human prolactin in the mammary gland, one of the main target organs of this hormone, leads to the formation of an autocrine-paracrine proliferative loop in this tissue. Involvement of prolactin in normal and neoplastic mammary development triggered the interest in transcriptional regulation of the human prolactin gene in mammary cells. Analysis of this regulation, and comparison to that in the pituitary, will contribute to a better understanding of mammary gland development and tumor formation. Here we present the first extensive analysis of the transcriptional regulation of the human prolactin gene in human mammary tumor cells.

Far upstream sequences regulate the human prolactin promoter transcription.

The human prolactin gene is mainly expressed in pituitary lactotrope cells, but transcription from an alternative, far upstream promoter was detected in lymphoid, placental and mammary cells. We describe the transcriptional activity in rat pituitary cells of the complete region separating the two promoters, using transient transfection experiments. A far upstream activating region was only functional in combination with the prolactin promoter. DNaseI protection experiments revealed, in addition to binding sites for the pituitary-specific factor Pit-1, sites (e.g. SD1) for several ubiquitous factors and one lymphoid-specific factor (SD4). A single copy of the ubiquitous site SD1 or the lymphoid-specific site SD4 was unable to activate transcription of a heterologous promoter in pituitary cells. However, SD1 activated transcription in nonpituitary cells and SD4 was functional specifically in lymphoid cells. Five copies of a distal site (D8) activated transcription in each cell type tested. Gel retardation experiments show that this site binds the specific factor C/EBP in liver and a distinct factor in other cell types. Our results suggest that different elements within this large region direct specific expression from each promoter via a complex interplay between cell-specific and ubiquitous transcription factors.

Thyroid hormone inhibits the human prolactin gene promoter by interfering with activating protein-1 and estrogen stimulations.

Transcription of the human PRL (hPRL) gene in the pituitary is subject to tissue-specific and multihormonal regulation involving two main regulatory regions, a proximal promoter and a distal enhancer. In this report we show that thyroid hormone inhibits the expression of the hPRL gene in rat pituitary cells. Transient expression experiments show that thyroid hormone regulation involves a strong inhibitory element, located in the proximal (-164/-35) promoter, which is modulated by a more distal stimulatory response control region. Gel retardation experiments reveal that the thyroid hormone receptor does not bind to the proximal negative element. We show the existence of an activating protein-1 (AP-1) response element located at positions -61 to -54 of the proximal promoter, conferring AP-1 stimulation to the hPRL promoter. This AP-1 induction is abolished when hormone-bound thyroid hormone receptor is present, indicating that there is an interference between the thyroid hormone receptor and AP-1 regulatory pathways. Furthermore, using the complete hPRL upstream region, we show that estrogen induction is abolished by simultaneous thyroid hormone treatment.

Purification, primary structure and molecular cloning of a rat ribosomal protein showing homology with yeast ribosomal protein YL34.

1. A new 17-kDa mammalian ribosomal protein (PR17) was purified to homogeneity from the rat exocrine pancreas. The purification procedure was based on acidic extraction of a heat-denatured homogenate, ammonium-sulfate precipitation, hydrophobic chromatography on phenyl-Sepharose and analytical reverse-phase HPLC on mu Bondapak C18. Fractions of interest were collected using an antiserum directed against the first (1-14) moiety of somatostatin (1-28). 30 micrograms pure RP17 were obtained from 1 g fresh pancreas. 2. A short 111-b cDNA encoding RP17 was amplified from rat pancreatic first-strand cDNA template by using two 64-fold degenerate heptadecamer primers in the DNA-polymerase-chain reaction. From the sequence of amplified cDNA, an unambiguous oligonucleotide probe was designed to screen a rat pancreatic cDNA library. A cDNA clone coding for RP17 was isolated, whose nucleotide sequence, with an open reading frame coding for 155 amino acids (molecular mass of 17,199 Da), confirmed the partial amino acid sequences directly obtained from the purified protein. 3. Northern-blot analysis showed that a similar 0.75-kb transcript was present in rat pancreas, in the rat pancreatic acinar cell line AR 4-2J and in the human neuroblastoma cell-line NB-OK-1, the highest level being in the latter two preparations, despite similar levels of RP17 in all three preparations, as tested with a rabbit antiserum directed against purified RP17. 4. The N-terminal sequence of both RP17 and the ribosomal protein YL43 from Saccharomyces cerevisiae (39 amino acid residues) showed a high degree of identity (77%), indicating that RP17 is a mammalian homolog of yeast ribosomal protein YL43.