ABSTRACT
The development of small-molecule organic solar cells with the required efficiency depends on the information obtained from molecular-level studies. In this context, 39 small-molecule donors featuring isoindigo as an acceptor moiety have been meticulously crafted for potential applications in bulk heterojunction organic solar cells. These molecules follow the D2-A-D1-A-D2 and D2-A-π-D1-π-A-D2 framework. Similar molecules considered in the previous experimental study (molecules R1 ((3E,3â³E)-6,6â³-(benzo[1,2-b:4,5-b']dithiophene-2,6-diyl)bis(1,1'-dimethyl-[3,3'-biindolinylidene]-2,2'-dione)) and R2 ((3E,3â³E)-6,6â³-(4,8-dimethoxybenzo[1,2-b:4,5-b']dithiophene-2,6-diyl)bis(1,1'-dimethyl-[3,3'-biindolinylidene]-2,2'-dione))) have been chosen as reference molecules. Molecules with and without π-spacers have been considered to understand the impact of the length of the π-spacer on intramolecular charge-transfer transitions and absorption properties. A detailed investigation is carried out to establish the relationship between the structure and photovoltaic parameters using density functional theory and time-dependent density functional theory methods. The newly developed molecules exhibit better electronic, excited-state, and charge transport properties than the reference molecules. Additionally, model donor-acceptor interfaces are constructed by integrating the designed donor molecules with fullerene/nonfullerene acceptors. The electronic and excited-state properties of these interfaces are rigorously evaluated. Results elucidate that the donor comprising of isoindigo-bithiophene-pyrroloindacenodithiophene (IIG-T2-PIDT) emerges as a promising candidate for bulk heterojunction solar cells based on nonfullerene acceptors. This research provides systematic design strategies for the development of small-molecule donors for organic solar cells.
ABSTRACT
The electrochemical reduction of carbon dioxide (CO2) to produce fuels and chemicals has garnered significant attention. However, achieving control over the selectivity of the resulting products remains a challenging task, particularly within molecular systems. In this study, we employed a molecular silver complex immobilized on graphitized mesoporous carbon (GMC) as a catalyst for converting CO2 into CO, achieving an impressive selectivity of over 90% at -1.05 V vs RHE. Notably, the newly formed silver nanoparticles emerged as the active sites responsible for this high CO selectivity rather than the molecular system. Intriguingly, the introduction of copper ions into the restructured Ag-nanoparticle-decorated carbon altered the product selectivity. At -1.1 V vs RHE in 0.1 M KCl, we achieved a high C2 selectivity of 75%. Furthermore, not only the Ag-Cu bimetallic nanoparticle but also the small-sized Ag-Cu nanocluster decorated over GMC was proposed as active sites during catalytic reactions. Our straightforward approach offers valuable insights for fine-tuning the product selectivity of immobilized molecular systems, extending beyond C1 products.
ABSTRACT
In the process of handling and storage of radioactive actinides it is essential to selectively sequester the minor actinides, such as Am and Cm, through a competitive complexation process. Herein we computationally designed two core modified ligands (L21- and L3) through systematic oxygen substitution at the NH sites of dipyriamethyrin (L1_2H), a hexadentate expanded porphyrin, and studied their competitive complexation towards trivalent actinides (An = Am/Cm) from their trichlorides using density functional theory (DFT). We observed shorter An-N bonds and longer An-O bonds in complexes based on core modified ligands (L21- and L3). The An-Cl bond length increases with increasing axial coordination number (i.e., from L12- to L3) to accommodate the ligands. All the bonds were identified to be electrostatic in nature. L12- exhibits shorter bonds and larger bond orders on complexing with Am than with Cm. On moving from complexes of L21- to L3, the An-N bond lengths are shortened, while An-O bond lengths become larger. Between the complexes of Am and Cm, there is marginal difference in their bond distances with L21- and L3. Charge analysis shows ligand to metal charge transfer during coordination, with back-donation from An to N/O and Cl. The calculated spin-density analysis indicates that An remains in its trivalent oxidation state on complexation, while orbital occupation analysis shows that the 5f and 6d orbitals are involved in bonding; this was confirmed by molecular orbital (MO) analysis that shows the complexes of L21- and L3 to exhibit higher degeneracy in their overlapping MOs. Further, the energy decomposition analysis (EDA) confirms that all ionic bonds are primarily due to electrostatic contributions, where the orbital contributions increase from L12- to L3 complexes and maximum covalency was observed in Cm complexes due to the energy matching between the 5f orbitals of Cm and the 2p orbitals of N and Cl, compared to Am. To confirm the competitiveness in the complexation of the ligand towards Am vs. Cm, the thermodynamic parameters were analysed for the ligand and metal substitution reactions. L12- shows more affinity towards Am than Cm, while L21- and L3 prefer Cm.
ABSTRACT
A combined solvent system composed of an acidic and a neutral extractant is demonstrated as an effective system for the mutual separation of lanthanides and actinides from nitric acid solutions. The geometry and stability of various possible complexes formed under extraction and stripping conditions in a combined solvent system composed of N,N-dioctyl hydroxyacetamide (DOHyA) and bis(2-ethylhexyl)phosphoric acid (HDEHP) in the n-dodecane medium were studied both experimentally and theoretically. Experimental observations of the distribution ratios of Am(III) and Eu(III) in the combined solvent system revealed synergistic extraction of trivalent metal ions at all nitric acid concentrations. Density functional theory (DFT) calculations were employed to understand the geometric and electronic properties of the ligands and their corresponding complexes with Am(III) and Eu(III). The calculated results indicate that the feasibility and behaviour of complex formation in the combined solvent system using different methods are based on the energetic aspects of the formation reactions. The study also reveals the participation of the neutral and acid extractants in the combined solvent system facilitating the separation of Eu(III) and Am(III) from high-level liquid waste.
ABSTRACT
Owing to the prominent existence and unique chemistry of actinyls, their complexation with suitable ligands is of significant interest. The complexation of high-valent actinyl moieties (An = U, Np, Pu and Am) with the acyclic sal-porphyrin analogue called "pyrrophen" (L(1)) and its dimethyl derivative (L(2)) with four nitrogen and two oxygen donor atoms was studied using relativistic density functional theory. Based on the periodic trends, the [UVO2-L(1)/L(2)]1- complexes show shorter bond lengths and higher bond orders that increase across the series of pentavalent actinyl complexes mainly due to the localization of the 5f orbitals. Among the hexavalent complexes, the [UVIO2-L(1)/L(2)] complexes have the shortest bonds. Following the uranyl complex, due to the plutonium turn, the [AmVIO2-L(1)/L(2)] complexes exhibit comparable properties with those of the former. Charge analysis suggests the complexation to be facilitated through ligand-to-metal charge transfer (LMCT) mainly through σ donation. Thermodynamic feasibility of complexation was modeled using hydrated actinyl moieties in aqueous medium and was found to be spontaneous. The dimethylated pyrrophen (L(2)) shows higher magnitudes of thermodynamic parameters indicating increased feasibility compared to the unsubstituted ligand (L(1)). Energy decomposition analysis (EDA) along with extended transition-state-natural orbitals for chemical valence theory (ETS-NOCV) analysis shows that the dominant electrostatic contributions decrease across the series and are counteracted by Pauli repulsion. Slight but considerable covalency is provided to hexavalent actinyl complexes by orbital contributions; this was confirmed by molecular orbital (MO) analysis that suggests strong covalency in americyl (VI) complexes. In addition to the pentavalent and hexavalent actinyl moieties, heptavalent actinyl species of neptunyl, plutonyl, and americyl were studied. Beyond the influence of the charges, the geometric and electronic properties point to the stabilization of neptunyl (VII) in the pyrrophen ligand environment, while the others shift to a lower (+VI) and relatively stable OS on complexation.
ABSTRACT
The minor actinides Am/Cm show multiple possibilities for coordination, providing great opportunities for their extraction and adsorption separation. Herein, we report complexation in an aqueous medium of AmIII/CmIII in the DOTA (H4DOTA = 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid) cavity with axial ligands (OH-, F-, and H2O), based on the energetics and electronic structure properties using density functional theory (DFT). The formation and substitution reactions of OH--capped complexes are more likely to occur due to their enhanced hydration Gibbs free energies, followed by F-, and then H2O. Both the longer An-ODOTA bond lengths and the larger bite angle (â O-An-O) in the OH--capped complexes reflect the enhanced coordination provided by the axial ligand, slightly less so for F-. Energy decomposition analysis based on the electronic structure supports the preference for OH--capped complexes with a near-perfect balance between attractive and repulsive contributions toward the interaction. Furthermore, molecular orbital analysis revealed that the frontier molecular orbitals of Am and Cm complexes are substantially different; that is, the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) compositions of the Am complexes are all contributed by 5f, while the HOMO and LUMO compositions of the Cm complexes are derived from 5f and 6d, respectively. Finally, the metal-exchange reactions demonstrate competitive complexation of DOTA toward AmIII over CmIII for the OH--capped system. These results imply the importance of coordination chemistry in actinide chemistry in general and specifically in AmIII/CmIII solution chemistry.
ABSTRACT
Self-assembled nanostructures obtained from various functional π-conjugated organic molecules have been able to draw substantial interest due to their inherent optical properties, which are imperative for developing optoelectronic devices, multiple-color-emitting devices with color-tunable displays, and optical sensors. These π-conjugated molecules have proven their potential employment in various organic electronic applications. Therefore, the stimuli-responsive fabrication of these π-conjugated systems into a well-ordered assembly is extremely crucial to tuning their inherent optical properties for improved performance in organic electronic applications. To this end, herein, we have designed and synthesized a functional π-conjugated molecule (TP) having phenanthro[9,10-d]imidazole with terpyridine substitution at the 2 position and its corresponding metal complexes (TPZn and (TP)2Zn). By varying the polarity of the self-assembly medium, TP, TPZn, and (TP)2Zn are fabricated into well-ordered superstructures with morphological individualities. However, this medium polarity-induced self-assembly can tune the inherent optical properties of TP, TPZn, and (TP)2Zn and generate multiple fluorescence colors. Particularly, this property makes them useful for organic electronic applications, which require adjustable luminescence output. More importantly, in 10% aqueous-THF medium, TPZn exhibited H-type aggregation-induced white light emission and behaved as a single-component white light emitter. The experimentally obtained results of the solvent polarity-induced variation in optical properties as well as self-assembly patterns were further confirmed by theoretical investigation using density functional theory calculations. Furthermore, we investigated the I-V characteristics, both vertical and horizontal, using ITO and glass surfaces coated with TP, TPZn, and (TP)2Zn, respectively, and displayed maximum current density for the TPZn-coated surface with the order of measured current density TPZn > TP > (TP)2Zn. This observed order of current density measurements was also supported by a direct band gap calculation associated with the frontier molecular orbitals using the Tauc plot. Hence, solvent polarity-induced self-assembly behavior with adjustable luminescence output and superior I-V characteristics of TPZn make it an exceptional candidate for organic electronic applications and electronic device fabrication.
ABSTRACT
An iodine-mediated radical cyclization of 1,6-enynones with sulphonyl hydrazides using tert-butyl hydroperoxide (TBHP) as the oxidant has been developed for the synthesis of iodo-sulphonylated-succinimide derivatives. The notable advantages of the developed method are metal-free conditions, broad functional group tolerance, column chromatography-free purification, high stereoselectivity (E isomer), shorter reaction times, and the cascade construction of three new bonds (C-S, C-I, and C-C). The synthetic application of the iodo-functionality has been extended to the Heck coupling reaction with acrylonitrile and to the Suzuki coupling reaction with benzene boronic acid.
Subject(s)
Acrylonitrile , Iodine , tert-Butylhydroperoxide/chemistry , Succinimides , Benzene , Molecular Structure , Iodine/chemistry , Metals , Oxidants , Boronic AcidsABSTRACT
The separation of mixtures of isomers is a daunting task. It is found that perethylated pillar[5]arene can separate trans-dichloroethene from its cis isomer. This work deals with the host-guest interactions and the selective separation of trans dihaloethene over cis-dihaloethene using perethylated pillar[5]arene. From this work, one can understand why only trans dihaloethenes are encapsulated while cis-dihaloethenes are not. Initially, molecular dynamics was performed at different picoseconds for the 1 : 1 inclusion complexes. In addition to these, MD simulation on a mixture of cis & trans isomers has also been done to ensure the preferential selectivity of perethylated pillar[5]arene towards the trans isomer. A brief DFT study was carried out to explain the better encapsulation of trans-dihaloethene in perethylated pillar[5]arene. Frontier molecular orbital analysis provides information on the stability and reactivity of the dihaloethene isomers. The non-covalent interactions between the host and the guest are determined using the quantum theory of atoms in molecules. Energy decomposition analysis indicates that the solvent phase influences the binding energy to a greater extent compared to the gas phase and orbital interaction energies are reduced substantially upon moving from the gas to the solvent phase. The Gibbs free energy indicates that these isomers readily form inclusion complexes with perethylated pillar[5]arene. Overall our results provide valuable information on the non-covalent interactions that drive the inclusion phenomenon in these host-guest systems.
ABSTRACT
The separation of minor actinides in their dioxocation (i.e., actinyl) form in high-valence oxidation states requires efficient ligands for their complexation. In this work, we evaluate the complexation properties of actinyls including americyl, curyl, berkelyl, and californyl in their pentavalent and hexavalent oxidation states with the dipyriamethyrin ligand (L) using density functional theory calculations. The calculated bond parameters show shorter AnîOyl bonds with covalent character and longer An-N bonds with ionic character. The bonding between the actinyl cation and the ligand anion shows a flow of charges from the ligand to actinyl in all [AnV/VIO2-L]1-/0 complexes. However, across the series, backdonation of charges from the metal to the ligand becomes prominent and stabilizes the complexes. The thermodynamic parameters in the gas phase and solution suggest that the complex formation reaction is spontaneous for [CfV/VIO2-L]1-/0 complexes and spontaneous at elevated temperatures (>298.15 K) for all other complexes. Spin-orbit corrections have a quantitative impact while the overall trend remains the same. Energy decomposition analysis (EDA) reveals that the interaction between actinyl and the ligand is mainly due to electrostatic contributions that decrease from Am to Cf along with an increase in orbital contributions due to the backdonation of charges from the actinyl metal center to the ligand that greatly stabilizes the Cf complex. The repulsive Pauli energy contribution is observed to increase in the case of [AnVO2-L]1- complexes from Am to Cf while a decrease is observed among [AnVIO2-L]0 complexes, showing minimum repulsion in [CfVIO2-L]0 complex formation. Overall, the hexavalent actinyl complexes show greater stability (increasing from Am to Cf) than their pentavalent counterparts.
ABSTRACT
The 1,4,7,10-tetrazacyclodecane-1,4,7,10-tetraacetic acid (DOTA) aqueous complexes of AcIII with H2O, dimethyl sulfoxide (DMSO), OH-, and F- as axial ligands were studied using density functional theory. Formation of the [AcIII(DOTA)(OH)]2- and [AcIII(DOTA)(F)]2- complexes is predicted to be significantly more favorable than that of [AcIII(DOTA)(H2O)]- and [AcIII(DOTA)(DMSO)]- because of the enhanced relative Gibbs free energies. Further electronic structure analyses demonstrate that the type and nature of the bond between Ac and the ligand donor atom is the main driving force that determines the thermodynamic stability of the complexes. Specifically, the [AcIII(DOTA)]- complex strongly binds to OH- and F- via covalent bonds, while the bonding to H2O and DMSO is ionic and relatively weaker.
ABSTRACT
Relativistic density functional theory has been employed to characterize [AnO2(L)]0/-1 complexes, where An = U, Np, Pu, and Am, and L is the recently reported hexa-aza porphyrin analogue, termed dipyriamethyrin, which contains six nitrogen donor atoms (four pyrrolic and two pyridine rings). Shorter axial (AnâO) and longer equatorial (An-N) bond lengths are observed when going from AnVI to AnV. The actinide to pyrrole nitrogen bonds are shorter as compared to the bonds to the pyridine nitrogens; the former also play a dominant role in the formation of the actinyl (VI and V) complexes. Natural population analysis shows that the pyrrole nitrogen atoms in all the complexes carry higher negative charges than the pyridine nitrogens. Upon binding actinyl ions with the ligand a significant ligand-to-metal charge transfer takes place in all the actinyl (VI and V) complexes. The formation energy of the actinyl(VI,V) complexes in the gas-phase is found to decrease in the order of UO2L > PuO2L > NpO2L > AmO2L. This trend is consistent with results for the formation of complexes in dichloromethane solution. The calculated ΔG and ΔH values are negative for all the complexes. Energy decomposition analysis (EDA) indicates that the interactions between actinyl(V/VI) and ligand are mainly controlled by electrostatic components over covalent orbital interactions, and the covalent character gradually decreases from U to Am for both pentavalent and hexavalent actinyl complexes.
ABSTRACT
Diels-Alder reaction of tetraarylcyclopentadienones with benzo[b]thiophene dioxides in xylenes at reflux led to the formation of tetra aryl-substituted dibenzothiophene as well as penta aryl-substituted benzene analogues depending on the influence of aryl substituents present on cyclopentadienones. The intermediate dihydrodibenzothiophene-dioxides underwent aromatization either through de-oxygenation or extrusion of sulfur dioxide to furnish substituted dibenzothiophenes or benzenes.
ABSTRACT
The anions pertechnetate, TcO4-, and perrhenate, ReO4-, exhibit very similar chemical and physical properties. Revealing and understanding disparities between them enhances fundamental understanding of both. Electrospray ionization generated the gas-phase proton bound dimer (TcO4-)(H+)(ReO4-). Collision induced dissociation of the dimer yielded predominantly HTcO4 and ReO4-, which according to Cooks' kinetic method indicates that the proton affinity (PA) of TcO4- is greater than that of ReO4-. Density functional theory computations agree with the experimental observation, providing PA[TcO4-] = 300.1 kcal mol-1 and PA[ReO4-] = 297.2 kcal mol-1. Attempts to rationalize these relative PAs based on elementary molecular parameters such as atomic charges indicate that the entirety of bond formation and concomitant bond disruption needs to be considered to understand the energies associated with such protonation processes. Although in both the gas and solution phases, TcO4- is a stronger base than ReO4-, it is noted that the significance of even such qualitative accordance is tempered by the very different natures of the underlying phenomena.
ABSTRACT
D-π-A-based dyes find a wide range of applications in molecular electronics and photovoltaics in general and dye-sensitized solar cells (DSSC) in particular. We speculated whether there exists a relationship between the degree of aromaticity of the π-spacers used in the D-π-A type dyes and their structural, electronic, energetic, photophysical, and intramolecular charge transfer properties. Triphenylamine (TPA) and cyanoacrylic acid (CAA) have been chosen as the donor and acceptor, respectively. In order to carry out the investigation systematically the π-spacers have been logically chosen based on their experimental resonance energies, which follows the order, furan < pyrrole < thiophene < pyridine < benzene. All the properties have been discussed based on the degree of aromaticity of the π-spacers. Geometric properties such as dihedral angles and bond lengths have been discussed extensively. Energy levels of the frontier molecular orbitals, electrochemical properties, namely, ground and excited state oxidation potentials (GSOP/ESOP), and change in Gibbs free energy for electron injection and regeneration (ΔGinj/ΔGreg) have also been evaluated. Photophysical properties like wavelength of maximum absorption (λmax), oscillator strength (f), light harvesting efficiency (LHE), and intramolecular charge transfer properties, viz., charge transfer distance (DCT), fraction of charge transferred (qCT), and change in dipole moment (µCT) have been assessed. The adsorption characteristics of dye with (TiO2)9 nanocluster have been studied along with their optical properties. Results reveal that the nature of the relationship between the aforementioned properties and the extent of aromaticity of the π-spacers is inherently multifaceted. It thus turns out that it is highly difficult to quantify the relationship. These properties of D-π1-π2-A molecules can be regarded to be arising from two groups, namely, π-spacers with lower and higher resonance energies. This results in a natural trade-off in selection of competing properties. The qualitative aromaticity photovoltaic property relationship thus obtained may serve as a guide to tailor-design various properties of D-π-A type dyes for application in the intramolecular charge transfer devices.
ABSTRACT
Herein, we report a novel solution processable fluorenone based small molecule with an Aggregation Induced Emission Enhancement (AIEE) property. In contrast to previous reports, the presence of the fluorenone moiety in FF triggers the AIEE property.