A new strategy to build electrochemical enzymatic biosensors using a nanohybrid material based on carbon nanotubes and a rationally designed schiff base containing boronic acid.

We report a nanohybrid material obtained by non-covalent functionalization of multi-walled carbon nanotubes (MWCNTs) with the new ligand (((1E,1'E)-(naphthalene-2,3-diylbis(azaneylylidene))bis(methaneylylidenedene)) bis(4-hydroxy-3,1-phenylene))diboronic acid (SB-dBA), rationally designed to mimic some recognition properties of biomolecules like concanavalin A, for the development of electrochemical biosensors based on the use of glycobiomolecules as biorecognition element. We present, as a proof-of-concept, a hydrogen peroxide biosensor obtained by anchoring horseradish peroxidase (HRP) at a glassy carbon electrode (GCE) modified with the nanohybrid prepared by sonication of 2.0 mg mL-1 MWCNTs and 0.50 mg mL-1 SB-dBA in N,N-dimethyl formamide (DMF) for 30 min. The hydrogen peroxide biosensing was performed at -0.050 V in the presence of 5.0 × 10-4 M hydroquinone. The analytical characteristics of the resulting biosensor are the following: linear range between 0.175 µM and 6.12 µM, detection limit of 58 nM, and reproducibility of 2.0 % using the same nanohybrid (6 biosensors), and 9.0 % using three different nanohybrids. The sensor was successfully used to quantify hydrogen peroxide in enriched milk and human blood serum samples and in a commercial disinfector.

The Human Dermis as a Target of Nanoparticles for Treating Skin Conditions.

Skin has a preventive role against any damage raised by harmful microorganisms and physical and chemical assaults from the external environment that could affect the body's internal organs. Dermis represents the main section of the skin, and its contribution to skin physiology is critical due to its diverse cellularity, vasculature, and release of molecular mediators involved in the extracellular matrix maintenance and modulation of the immune response. Skin structure and complexity limit the transport of substances, promoting the study of different types of nanoparticles that penetrate the skin layers under different mechanisms intended for skin illness treatments and dermo-cosmetic applications. In this work, we present a detailed morphological description of the dermis in terms of its structures and resident cells. Furthermore, we analyze the role of the dermis in regulating skin homeostasis and its alterations in pathophysiological conditions, highlighting its potential as a therapeutic target. Additionally, we describe the use of nanoparticles for skin illness treatments focused on dermis release and promote the use of metal-organic frameworks (MOFs) as an integrative strategy for skin treatments.

New Highly Charged Iron(III) Metal-Organic Cube Stabilized by a Bulky Amine.

In this work, we report a new octanuclear cluster based on FeIII and the ligand 1H-imidazole-4,5-dicarboxylic acid, [Et3NH]12[Fe8(IDC)12]·10DMF·13H2O (1), with a metal core containing eight FeIII connected by only one type of organic ligand. A peak at 573 m/z in the mass spectra of the compound suggests the adduct species {[Fe8(IDC)12]+8H}4-. By X-ray photoelectron spectroscopy, the oxidation state of the iron cation was confirmed to be 3+, also identifying the presence of a quaternary nitrogen species, which act as a countercation of the anionic metal core [Fe8(IDC)12]12-. Mössbauer spectra recorded at different temperatures show an isomer shift and quadrupole splitting parameters that confirm the existence of only FeIII-HS in the structure of 1. X-ray analysis reveals that compound 1 crystallizes in the orthorhombic system space group Ibam, confirming a molecular cluster structure with an almost regular cube as geometry, with the FeIII atoms located at the corners of the cube and connected by µ-1κ2 N,O:2κ2 N',O‴-IDC3- bridges. Additionally, the magnetic measurements reveal a weak antiferromagnetic coupling in the Fe8 III coordination cluster (J = -3.8 cm-1). To the best of our knowledge, 1 is the first member of the family of cubes assembled with 1H-imidazole-4,5-dicarboxylic acid and FeIII cation, exhibiting high pH stability over a broad pH range, making it an ideal candidate for the design of supramolecular structures and metal-organic frameworks.

Co0 superparamagnetic nanoparticles stabilized by an organic layer coating with antimicrobial activity.

Cobalt (Co) is one of the most promising materials in nanotechnology due to its superior magnetic properties. However, due to the high cytotoxicity of cobalt, the activity in biological systems has been little studied. In this work, we report the structural, morphological, and magnetic properties of cobalt nanoparticles stabilized with an organic layer (Co0@C-NPs) and its potential antimicrobial activity. The Co0@C-NPs were obtained from solvothermal conditions and characterized by X-ray powder diffraction, electronic microscopy, and magnetic measurements. The organic layer was analysed by thermogravimetric analysis, Scanning Electron Microscopy, Energy Dispersive Spectrometer, and Fourier Transform Infrared Spectroscopy. From the TEM image, an organic coating layer is observed around Co0 where this coating prevents NPs from oxidation allowing it to remain stable until 400 °C. Surface composition studies by SEM/EDS allowed the identification of carbon, oxygen, and cobalt elements present in the organic layer. This result was corroborated later by FITR analysis. Preliminary antibacterial properties were also investigated, which showed that the cobalt nanoparticles are active against Staphylococcus aureus after 1 h of exposure. The superparamagnetic properties and organic coating Co0@C-NPs could be biocompatible with biological systems, but more research is needed to apply these nanoparticles in biomedical products.

Hybrid organic-inorganic mononuclear lanthanoid single ion magnets.

The first family of hybrid mononuclear organic-inorganic lanthanoid complexes is reported, based on [PW11O39]7- and 1,10-phenanthroline ligands. This hybrid approach causes a dramatic improvement of the relaxation time (×1000) with a decrease of the optimal field while maintaining the Ueff of the inorganic analogues.

Retraction: Ni2[LnCl6] (Ln = EuII, CeII, GdII): the first LnII compounds stabilized in a pure inorganic lattice.

Retraction of 'Ni2[LnCl6] (Ln = EuII, CeII, GdII): the first LnII compounds stabilized in a pure inorganic lattice' by Bianca Baldo et al., Chem. Commun., 2018, 54, 7531-7534.

Substitution Effect on the Charge Transfer Processes in Organo-Imido Lindqvist-Polyoxomolybdate.

Two new aromatic organo-imido polyoxometalates with an electron donor triazole group ([n-Bu4N]2[Mo6O18NC6H4N3C2H2]) (1) and a highly conjugated fluorene ([n-Bu4N]2[Mo6O18NC13H9]) (2) have been obtained. The electrochemical and spectroscopic properties of several organo-imido systems were studied. These properties were analysed by the theoretical study of the redox potentials and by means of the excitation analysis, in order to understand the effect on the substitution of the organo-imido fragment and the effect of the interaction to a metal centre. Our results show a bathochromic shift related to the charge transfer processes induced by the increase of the conjugated character of the organic fragment. The cathodic shift obtained from the electrochemical studies reflects that the electronic communication and conjugation between the organic and inorganic fragments is the main reason of this phenomenon.

Ni2[LnCl6] (Ln = EuII, CeII, GdII): the first LnII compounds stabilized in a pure inorganic lattice.

Here we report the first examples of 3d-4f compounds based on LnII cations. We have obtained a series of Ni2[LnCl6] isostructural compounds where LnII = Ce 1, Eu 2 and Gd 3 which were characterized in a cubic crystalline system with a Fm3[combining macron]m space group. Magnetic and optical characterization was also performed on this new class of compounds.

pH-Controlled Assembly of 3D and 2D Zinc-Based Metal-Organic Frameworks with Tetrazole Ligands.

We report the synthesis and structural diversity of Zn(II) metal-organic framework (MOF) with in situ formation of tetrazole ligand 3-ptz [3-ptz = 5-(3-pyridyl)tetrazolate] as a function pH. By varying the initial reaction pH, we obtain high-quality crystals of the noncentrosymmetric three-dimensional MOF Zn(3-ptz)2 , mixed phases involving the zinc-aqua complex [Zn(H2O)4(3-ptz)2]·4H2O, and two-dimensional MOF crystals Zn(OH)(3-ptz) with a tunable microrod morphology, keeping reaction time, temperature, and metal-ligand molar ratio constant. Structures are characterized by X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, and UV-vis spectroscopy. We discuss the observed structural diversity in terms of the relative abundance of hydroxo-zinc species in solution for different values of pH.

The first ReI organometallic complex with an organoimido-polyoxometalate ligand.

The spectroscopic, electrochemical and photophysical properties of the first ReI organometallic organoimido-polyoxometalate complex [n-Bu4N][Mo6O18NC6H4-CH2-N3C2H2-Re-phen(CO)3] compared with all fragments are reported. The UV-Vis spectra are analysed using experimental and theoretical tools. In contrast to the reported studies in the literature, our results show that a new more intense band is present in the spectra of the hybrid ligand obscuring the intra-polyanion charge transfer. The electrochemical results show that the strong acceptor character of the polyoxometalate fragment is quenched by the condensation of the phenyl-triazole molecule.

Single-Molecule Magnet Properties of Transition-Metal Ions Encapsulated in Lacunary Polyoxometalates: A Theoretical Study.

Single-molecule magnet (SMM) properties of transition-metal complexes coordinated to lacunary polyoxometalates (POM) are studied by means of state of the art ab initio methodology. Three [M(γ-SiW10O36)2] (M = Mn(III), Fe(III), Co(II)) complexes synthesized by Sato et al. (Chem. Commun. 2015, 51, 4081-4084) are analyzed in detail. SMM properties for the Co(II) and Mn(III) systems can be rationalized due to the presence of low-energy excitations in the case of Co(II), which are much higher in energy in the case of Mn(III). The magnetic behavior of both cases is consistent with simple d-orbital splitting considerations. The case of the Fe(III) complex is special, as it presents a sizable demagnetization barrier for a high-spin d(5) configuration, which should be magnetically isotropic. We conclude that a plausible explanation for this behavior is related to the presence of low-lying quartet and doublet states from the iron(III) center. This scenario is supported by ab initio ligand field analysis based on complete active space self-consistent field results, which picture a d-orbital splitting that resembles more a square-planar geometry than an octahedral one, stabilizing lower multiplicity states. This coordination environment is sustained by the rigidity of the POM ligand, which imposes a longer axial bond distance to the inner oxygen atom in comparison to the more external, equatorial donor atoms.

Exchange Interactions on the Highest-Spin Reported Molecule: the Mixed-Valence Fe42 Complex.

The finding of high-spin molecules that could behave as conventional magnets has been one of the main challenges in Molecular Magnetism. Here, the exchange interactions, present in the highest-spin molecule published in the literature, Fe42, have been analysed using theoretical methods based on Density Functional Theory. The system with a total spin value S = 45 is formed by 42 iron centres containing 18 high-spin Fe(III) ferromagnetically coupled and 24 diamagnetic low-spin Fe(II) ions. The bridging ligands between the two paramagnetic centres are two cyanide ligands coordinated to the diamagnetic Fe(II) cations. Calculations were performed using either small Fe4 or Fe3 models or the whole Fe42 complex, showing the presence of two different ferromagnetic couplings between the paramagnetic Fe(III) centres. Finally, Quantum Monte Carlo simulations for the whole system were carried out in order to compare the experimental and simulated magnetic susceptibility curves from the calculated exchange coupling constants with the experimental one. This comparison allows for the evaluation of the accuracy of different exchange-correlation functionals to reproduce such magnetic properties.

First copper(ii) phase M'0.2Mn0.8PS3·0.25H2O and analogous M' = Co(II), Ni(II) and Zn(II) materials obtained by microwave assisted synthesis.

M'0.2Mn0.8PS3·0.25H2O materials are obtained by a mild microwave assisted reaction (M' = Co(II), Ni(II), Cu(II), Zn(II)), which permitted us to obtain the first copper(ii) bimetallic phase. All these materials have a lower energy gap and antiferromagnetic interactions with lower values of the Weiss constant, than that of the pristine phase MnPS3.

1D magnetic interactions in Cu(II) oxovanadium phosphates (VPO), magnetic susceptibility, DFT, and single-crystal EPR.

We report the crystal face indexing and molecular spatial orientation, magnetic properties, electron paramagnetic resonance (EPR) spectra, and density functional theory (DFT) calculations of two previously reported oxovanadium phosphates functionalized with Cu(II) complexes, namely, [Cu(bipy)(VO2)(PO4)]n (1) and [{Cu(phen)}2(VO2(H2O)2)(H2PO4)2 (PO4)]n (2), where bipy = 2,2'-bipyridine and phen = 1,10-phenanthroline, obtained by a new synthetic route allowing the growth of single crystals appropriate for the EPR measurements. Compounds 1 and 2 crystallize in the triclinic group P1̅ and in the orthorhombic Pccn group, respectively, containing dinuclear copper units connected by two -O-P-O- bridges in 1 and by a single -O-P-O- bridge in 2, further connected through -O-P-O-V-O- bridges. We emphasize in our work the structural aspects related to the chemical paths that determine the magnetic properties. Magnetic susceptibility data indicate bulk antiferromagnetism for both compounds, allowing to calculate J = -43.0 cm(-1) (dCu-Cu = 5.07 Å; J defined as Hex(i,j) = -J Si·Sj), considering dinuclear units for 1, and J = -1.44 cm(-1) (dCu-Cu = 3.47 Å) using the molecular field approximation for 2. The single-crystal EPR study allows evaluation of the g matrices, which provide a better understanding of the electronic structure. The absence of structure of the EPR spectra arising from the dinuclear character of the compounds allows estimation of weak additional exchange couplings |J'| > 0.3 cm(-1) for 1 (dCu-Cu = 5.54 Å) and a smaller value of |J'| ≥ 0.15 cm(-1) for 2 (dCu-Cu = 6.59 Å). DFT calculations allow evaluating two different exchange couplings for each compound, specifically, J = -36.60 cm(-1) (dCu-Cu = 5.07 Å) and J' = 0.20 cm(-1) (dCu-Cu =5.54 Å) for 1 and J = -1.10 cm(-1) (dCu-Cu =3.47 Å) and J' = 0.01 cm(-1) (dCu-Cu = 6.59 Å) for 2, this last value being in the range of the uncertainties of the calculations. Thus, these values are in good agreement with those provided by magnetic and single-crystal EPR measurements.

Crystal lattice effect on the quenching of the intracluster magnetic interaction in [V12B18O60H6](10-) polyoxometalate.

In the present work, the synthesis and structural characterization of four new polyoxovanadoborate (BVO) frameworks based on the [V12B18O60H6](10-) polyanion are reported: (NH4)8(1,3-diapH2)[V12B18O60H6]·5H2O (1), K8(NH4)2[V12B18O60H6]·18H2O (2), K10[V12B18O60H6]·10H2O (3) and K8Cs2[V12B18O60H6]·10H2O (4). A global antiferromagnetic behaviour is observed for these 10V(IV)/2V(V) mixed valence clusters. The magnetic data of 1, 2 and 3, which present different countercation environments, show that 1 is more coupled than 2 and 3. DFT calculations show that the positive charges strongly influence the polarization mechanism of the spin density of the vanadyl groups and the extent of the magnetic orbitals, therefore corroborating the experimental observation of the quenching effect of the magnetic coupling between vanadium centres of 2 and 3.

The layered structure of poly[[hexaaqua(µ4-benzene-1,2,4,5-tetracarboxylato)dicopper(II)] tetrahydrate].

In the structure of the title compound, {[Cu2(C10H2O8)(H2O)6]·4H2O}n, the benzene-1,2,4,5-tetracarboxylate ligand, (btec)(4-), is located on a crystallographic inversion centre in a µ4-coordination mode. The coordination environment of each pentacoordinated Cu(II) centre is square pyramidal (SBP), formed by three water molecules and two carboxylate O atoms from two different (btec)(4-) ligands. The completely deprotonated (btec)(4-) ligand coordinates in a monodentate mode to four Cu(II) atoms. The alternation of (btec)(4-) ligands and SBP Cu(II) centres leads to the formation of a planar two-dimensional covalent network of parallelograms, parallel to the ab plane. Hydrogen bonds between a basal water molecule and an apical one from an adjacent [Cu(btec)0.5(H2O)3] unit exist in the intralayer space. Hydrogen bonds are also present between the two-dimensional network and the water molecules filling the channels in the structure.

Unusual conformation of a dinuclear paddle wheel copper(II) complex. Synthesis, structural characterization and EPR studies.

An unusual and unique conformation of a paddle wheel type binuclear copper(II) complex containing acetate and acetamido ligands, {Cu2(µ2-O2CCH3)4}(OCNH2CH3) (1), was obtained by solvothermal synthesis. The structural characterization of this compound shows that the apical (acetamido) ligands are disposed at a 62° dihedral angle, generating a special conformation as a consequence of the synthetic method used. This conformation has not been reported in other paddle wheel copper(II) tetraacetate compounds. Electron paramagnetic resonance (EPR) spectra of powder samples of (1) were obtained at 9.5 and 33.8 GHz, while single crystal spectra were obtained at 33.8 GHz with a B0 applied in three orthogonal planes. The fit of the single crystal experimental data allowed gave g∥ = 2.345 ± 0.003, and g⊥ = 2.057 ± 0.005. The angular variation of the EPR line allows evaluation of the fine structure of (1), giving D = -0.337 ± 0.002 cm(-1) and E = -0.005 ± 0.001 cm(-1). The line width angular dependence, used together with the Anderson model and Kubo-Tomita theory, permitted the interdimer interaction to be evaluated as |J'| = (0.051 ± 0.002) cm(-1). Using the powder spectral temperature dependence it was possible to evaluate the intradinuclear exchange coupling constan J0 as -101 ± 2 cm(-1), which is considerably lower than that reported for other analogous copper(II) tetraacetate paddle wheel compounds (Cu(II)-PW), showing the remarkable effect of the conformation of the terminal ligands on the magnetic interaction.

catena-Poly[tris(µ3-acetylacetonato)nickelate(II)sodium(I)].

The title complex, [NaNi(C5H7O2)3]n, contains an anionic tris(acetylacetonato)nickelate(II) unit, [Ni(acac)3](-) (acac is acetylacetonate), with a highly regular octahedral coordination geometry. The Ni(II) cation lies on a Wyckoff a site, resulting in D3 symmetry of the anion. Charge balance is provided by sodium cations, which occupy Wyckoff type b sites. Each sodium cation is surrounded by two [Ni(acac)3](-) anions, each of which is connected to the alkali metal through three O atoms, in a fac configuration. This arrangement leads to the formation of linear [Na{Ni(acac)3}]n chains along the c axis. The Ni···Na distance is 2.9211 (10) Å. The title complex is one of the few examples of heterometallic systems based on alkali and transition metal cations bridged by acetylacetonate ligands.

Theoretical description of the magnetic properties of µ3-hydroxo bridged trinuclear copper(II) complexes.

A theoretical study of the magnetic properties, using density functional theory, of a family of trinuclear µ3-OH copper(II) complexes reported in the literature is presented. The reported X-ray crystal structures of [Cu3(µ3-OH)(aat)3(H2O)3](NO3)2 · H2O (HUKDUM), where aat: 3-acetylamine-1,2,4-triazole; [Cu3(µ3-OH)(aaat)3(H2SO4)(HSO4)(H2O)] (HUKDOG), where aaat: 3-acetylamine-5-amine-1,2,4-triazole; [Cu3(µ3-OH)(PhPyCNO)3(tchlphac)2] (HOHQUR), where PhPyCNO: phenyl 2-pyridyl-ketoxime and tchlphac: acid 2,4,5-trichlorophenoxyacetic; [Cu3(µ3-OH)(PhPyCNO)3(NO3)2(CH3OH)] (ILEGEM); [Cu3(µ3-OH)(pz)3(Hpz)3(ClO4)2] (QOPJIP), where Hpz = pyrazole; [Cu3(µ3-OH)(pz)3(Hpz)(Me3CCOO)2] ∙ 2Me3CCOOH (DEFSEN) and [Cu3(µ3-OH)(8-amino-4-methyl-5-azaoct-3-en-2-one)3][CuI3] (RITXUO), were used in the calculations. The magnetic exchange constants were calculated using the broken-symmetry approach. The calculated J values are for HUKDUM J1 = -68.6 cm(-1), J2 = -69.9 cm(-1), J3 = -70.4 cm(-1); for HUKDOG, J1 = -73.5 cm(-1), J2 = -58.9 cm(-1), J3 = -62.1 cm(-1); for HOHQUR J1 = -128.3 cm(-1), J2 = -134.1 cm(-1), J3 = -120.4 cm(-1); for ILEGEM J1 = -151.6 cm(-1), J2 = -173.9 cm(-1), J3 = -186.9 cm(-1); for QOPJIP J1 = -118.3 cm(-1), J2 = -106.0 cm(-1), J3 = -120.6 cm(-1); for DEFSEN J1 = -74.9 cm(-1), J2 = -64.0 cm(-1), J3 = -57.7 cm(-1) and for RITXUO J1 = -10.9 cm(-1), J2 = +14.3 cm(-1), J3 = -35.4 cm(-1). The Kahn-Briat model was used to correlate the calculated magnetic properties with the overlap of the magnetic orbitals. Spin density surfaces show that the delocalization mechanism is predominant in all the studied compounds.

A new hybrid organic-inorganic chain: [(phen)Cu-µ-(κ2O:O'-VP2O10H3)2-Cu(phen)]n.

The structure of the title compound, poly[(dihydrogenphosphato-κO)(µ(3)-hydrogenphosphato)di-µ-oxido-(1,10-phenanthroline)copper(II)vanadium(V)], [CuV(HPO(4))(H(2)PO(4))O(2)(C(12)H(8)N(2))](n), is defined by [(phen)Cu-µ-(κ(2)O:O'-VP(2)O(10)H(3))(2)-Cu(phen)] units (phen is 1,10-phenanthroline), which are connected to neighbouring units through vanadyl bridges. Neighbouring chains have no covalent bonds between them, although they interdigitate through the phen groups via π-π interactions.