Integrated Circular Dichroism and Circularly Polarized Luminescence Measurements.

Circularly polarized luminescent (CPL) systems have a plethora of potential applications owing to their interesting excited-state properties. However, the progress in developing new chiral luminescence systems is significantly hindered by the lack of available instrumentation for the broader chemistry and materials science community to perform routine, reproducible measurements of chiral spectroscopies. In this work, we present data from an easy-to-use custom-built instrument based on a Jasco circular dichroism (CD) spectropolarimeter coupled with a CPL emission monochromator (CD/CPL hybrid system). The hybrid system measures CPL, fluorescence, CD, and absorbance on the same part of the sample without the need to move between the CD and CPL measurements. The instrument uses a xenon arc lamp as the light source, enabling a wide range of excitation wavelengths to support flexible development of new molecules and materials. Data obtained and presented for camphor, ruthenium metal complexes, the peptide gramicidin, and a DNA-ligand (4',6-diamidino-2-phenylindole, DAPI) system in this work highlight the ease of use and reproducibility of the results. The g-factors for CD and CPL obtained for the different compounds are shown to be the same for isolated transitions and some examples of how to use variations of g-factors with wavelength are demonstrated. The reliable and excellent benchmark results obtained from a custom-built commercial wavelength scanning CPL/CD hybrid instrument open up new avenues for the broader chemical and materials science community to intensify research on chiral luminescent systems.

New Approaches to Stretched Film Sample Alignment and Data Collection for Vibrational Linear Dichroism.

Rapid measurements of vibrational linear dichroism (VLD) infrared spectra are shown to be possible by using stretched polymer films and an extension of existing instrumentation designed for vibrational circular dichroism spectroscopy. Earlier techniques can be extended using additional inexpensive polymer substrates to record good-quality VLD spectra of a significantly wider range of compounds with comparatively short sample-preparation times. The polymer substrates used, polyethylene and polytetrafluoroethylene, are commonly available and inexpensive, and samples are more easily prepared than that for many earlier stretched-film and crystal studies. Data are presented for neutral hydrophobic organic molecules on hydrophobic films including acridine, anthracene, fluorene, and recently synthesized S-(4-((4-cyanophenyl)ethynyl)phenyl)ethanethioate. We extend the approach to polar or ionic species, including 2,2'-bipyridine, 1,10-phenanthroline, and sodium dodecyl sulfate, by oxidizing polyethylene films to change their wetting properties. The combination of new instrumentation and modified sample preparation methods is useful in basic spectroscopy for untangling and assigning complicated infrared spectra. Nevertheless, it is not a panacea as surface-adsorbed molecules are often not monodispersed, and higher analyte concentrations can lead to aggregation and resonance phenomena that have previously been observed for infrared spectra on surfaces. These effects can be assessed by varying the sample concentration. The focus of this paper is experimental, and detailed analysis of most of the spectra lies outside its scope, including some well-studied compounds such as acridine and anthracene that allow comparisons with earlier research.

The Search for Efficient True Blue and Deep Blue Emitters: An Overview of Platinum Carbene Acetylide Complexes.

Despite significant strides achieved in organic light emitting diode (OLED) based display technologies during the last decade, the search for highly stable and efficient true blue/deep blue emitters continues to remain elusive. During the past decade, emitters with the basic molecular scaffold consisting of Pt(II) acetylides and N-heterocyclic carbene (NHC) ligands have opened interesting opportunities to tune the emission properties with desired chromaticity in the blue and deep blue region. With an aim to achieve the desired CIE coordinates along with low device roll-off efficiencies and satisfactory color purity, a number of variations on the basic molecular fragment have been made. A number of NHC Pt(II) alkyne complexes bearing monodentate, bidentate and tridentate ligands have been synthesized and their photophysical investigations have been reported. Although NHC Pt(II) alkyne complexes have been explored in other areas of applications, much of the investigations have been primarily focused for their interesting emission properties appearing particularly in the shorter wavelength (450-495 nm) part of the electromagnetic spectrum for organic light emitting diode (OLED) devices. In this review, we provide an overview of the investigated NHC Pt(II) acetylide complexes by detailing their synthesis, luminescence properties, performance in devices and future perspectives.

Benzalkonium chloride antagonises aminoglycoside antibiotics and promotes evolution of resistance.

BACKGROUND: Biocide disinfectants are essential tools in infection control, but their use can inadvertently contribute to emergence of antibiotic-resistant bacteria. In this study we systematically examine the effect of the biocide benzalkonium chloride, which is primarily used for surface disinfection but is also present as a preservative in many consumer products, on the activity of aminoglycoside antibiotics in Acinetobacter baumannii. METHODS: The effect of subinhibitory BAC on aminoglycoside treatment of A. baumannii ATCC17978 was investigated using time-to-kill assays, MIC determination, directed evolution experiments, fluctuation tests and labelled gentamicin accumulation assays. Further MIC determinations and directed evolution experiments were performed with additional Gram-negative ESKAPE pathogens. FINDINGS: In A. baumannii ATCC17978, BAC prevents gentamicin killing and drastically increases the frequency at which resistant mutants emerge, through reducing intracellular antibiotic accumulation. BAC also increases the MIC of multiple aminoglycoside antibiotics (kanamycin, tobramycin, streptomycin, gentamicin and amikacin). BAC promotes the emergence of mutants with reduced gentamicin susceptibility in other Gram-negative ESKAPE pathogens but does not always alter the MIC. These effects occur at BAC concentrations which are similar to residual levels in high-use environments, and just below the concentration range for BAC when used as a preservative in eye drops and ear drops. INTERPRETATION: Our results suggest that subinhibitory BAC has the potential to antagonise aminoglycoside activity and promote the emergence of bacterial mutants with reduced susceptibility. We suggest that the extremely widespread use of BAC in clinical and home settings and its long half-life mean there is potential for these interactions to occur in the environment, or in patients who use BAC-containing products while taking aminoglycosides to treat skin, eye or ear infections, although such co-exposure is likely to be rare. We suggest that biocide stewardship is needed to prevent the types of exposure that can contribute to antibiotic resistance. FUNDING: This work was funded by the National Health and Medical Research Council of Australia. The funders had no role in study design, interpretation or decision to publish.

Surface Plasmon-Coupled Dual Emission Platform for Ultrafast Oxygen Monitoring after SARS-CoV-2 Infection.

The outbreak of the COVID-19 pandemic has had a major impact on the health and well-being of people with its long-term effect on lung function and oxygen uptake. In this work, we present a unique approach to augment the phosphorescence signal from phosphorescent gold(III) complexes based on a surface plasmon-coupled emission platform and use it for designing a ratiometric sensor with high sensitivity and ultrafast response time for monitoring oxygen uptake in SARS-CoV-2-recovered patients. Two monocyclometalated Au(III) complexes, one having exclusively phosphorescence emission (λPL = 578 nm) and the other having dual emission, fluorescence (λPL = 417 nm) and phosphorescence (λPL = 579 nm), were studied using the surface plasmon-coupled dual emission (SPCDE) platform for the first time, which showed 27-fold and 17-fold enhancements, respectively. The latter complex having the dual emission was then used for the fabrication of a ratiometric sensor for studying the oxygen quenching of phosphorescence emission with the fluorescence emission acting as an internal standard. Low-cost poly (methyl methacrylate) (PMMA) and biodegradable wood were used to fabricate the microfluidic chips for oxygen monitoring. The sensor showed a high sensitivity with a limit of detection ∼ 0.1%. Furthermore, real-time oxygen sensing was carried out and the response time of the sensor was calculated to be ∼0.2 s. The sensor chip was used for monitoring the oxygen uptake in SARS-CoV-2-recovered study participants, to assess their lung function post the viral infection.

Monocyclometalated (C

Invited for the cover of this issue are Koushik Venkatesan and co-workers at Macquarie University and the University of Zurich. The image depicts the conversion of 3 O2 to 1 O2 upon photoexcitation by new monocyclometalated gold(III) metallacycles. Read the full text of the article at 10.1002/chem.202102331.

Monocyclometalated (C N) Gold(III) Metallacycles: Tunable Emission and Singlet Oxygen (1 O2 ) Generation Properties.

The synthesis, characterization and photoluminescent properties of four cyclometalated (C N)-type gold(III) complexes bearing a bidentate diacetylide ligand, tolan-2,2'-diacetylide (tda), are reported. The complexes exhibit highly tunable excited state properties and show photoluminescence (PL) across the entire visible spectrum from sky-blue (λPL =493 nm) to red (λPL =675 nm) with absolute PL quantum yields (PLQY) of up to 75 % in solution, the highest PLQY found for any monocyclometalated Au(III) complex in solution. As a consequence of the use of the strongly rigidifying diacetylide bidentate ligand, a significant increase in the excited state lifetimes (τ0 =16-258 µs) was found in solution and in thin films. The complexes showed remarkable singlet oxygen generation in aerated solution with absolute singlet oxygen quantum yield (ϕ1Δ ) values reaching up to 7.5×10-5 and singlet oxygen lifetimes (τ0 1Δ ) in the range of 66-95 µs. Furthermore, the radiative and non-radiative rates of singlet oxygen were determined using the ϕ1Δ and τ0 1Δ values and correlations are drawn between the formation of singlet oxygen and its interaction with cyclometalated (C N) gold(III) complexes.

Tunable Light-Emission Properties of Solution-Processable N-Heterocyclic Carbene Cyclometalated Gold(III) Complexes for Organic Light-Emitting Diodes.

N-Heterocyclic carbene (NHC) cyclometalated gold(III) complexes remain very scarce and therefore their photophysical properties remain currently underexplored. Moreover, gold(III) complexes emitting in the blue region of the electromagnetic spectrum are rare. In this work, a series of four phosphorescent gold(III) complexes was investigated bearing four different NHC monocyclometalated (C^C*)-type ligands and a dianionic (N^N)-type ancillary ligand ((N^N)=5,5'-(propane-2,2-diyl)bis(3-(trifluoromethyl)-1 H-pyrazole) (mepzH2 )). The complexes exhibit strong phosphorescence when doped in poly(methyl methacrylate) (PMMA) at room temperature, which were systematically tuned from sky-blue [λPL =456 nm, CIE coordinates: (0.20, 034)] to green [λPL =516 nm, CIE coordinates: (0.31, 0.54)] by varying the monocyclometalated (C^C*) ligand framework. The complexes revealed high quantum efficiencies (ϕPL ) of up to 43 % and excited-state lifetimes (τ0 ) between 15-266 µs. The radiative rate constant values found for these complexes (kr =103 -104  s-1 ) are the highest found in comparison to previously known best-performing monocyclometalated gold(III) complexes. Density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations of these complexes further lend support to the excited-state nature of these complexes. The calculations showed a significant contribution of the gold(III) metal center in the lowest unoccupied molecular orbitals (LUMOs) of up to 18 %, which was found to be unique for this class of cyclometalated gold(III) complexes. Additionally, organic light-emitting diodes (OLEDs) were fabricated by using a solution process to provide the first insight into the electroluminescent (EL) properties of this new class of gold(III) complexes.

Development of tethered dual catalysts: synergy between photo- and transition metal catalysts for enhanced catalysis.

While dual photocatalysis-transition metal catalysis strategies are extensively reported, the majority of systems feature two separate catalysts, limiting the potential for synergistic interactions between the catalytic centres. In this work we synthesised a series of tethered dual catalysts allowing us to investigate this underexplored area of dual catalysis. In particular, Ir(i) or Ir(iii) complexes were tethered to a BODIPY photocatalyst through different tethering modes. Extensive characterisation, including transient absorption spectroscopy, cyclic voltammetry and X-ray absorption spectroscopy, suggest that there are synergistic interactions between the catalysts. The tethered dual catalysts were more effective at promoting photocatalytic oxidation and Ir-catalysed dihydroalkoxylation, relative to the un-tethered species, highlighting that increases in both photocatalysis and Ir catalysis can be achieved. The potential of these catalysts was further demonstrated through novel sequential reactivity, and through switchable reactivity that is controlled by external stimuli (heat or light).

Towards blue emitting monocyclometalated gold(iii) complexes - synthesis, characterization and photophysical investigations.

Blue emitting phosphorescent materials with high efficiency and high stability are a key requirement for the wider adoption of organic light emitting devices (OLEDs). In order to achieve triplet derived emission at the higher energy region of the electromagnetic spectrum, a series of neutral, monocyclometalated gold(iii) complexes with trifluoromethyl and trifluoromethoxy functionalized 2-phenylpyridine (ppy) derivatives, 2-anilinopyridine (apy), 2-benzoylpyridine (bpy) and 2-benzylpyridine (bepy), as the cyclometalating framework and diaryl or monoaryl alkyne as ancillary ligands have been designed and synthesized. Extensive photophysical and chemical characterization by various nuclear magnetic resonance spectroscopy techniques, elemental analysis and single crystal X-ray diffraction studies of selected compounds was carried out to confirm the structural and the chemical identity of the complexes. The emission wavelength maxima of the complexes appear in the blue/sky blue region of the electromagnetic spectrum. Detailed photophysical investigations revealed that the different emission properties of the complexes are predominantly dictated by the electronic properties of the cyclometalating ligand. The interesting photoluminescence properties along with the facile synthetic access makes this a promising concept to obtain highly suitable blue emitting gold(iii) complexes.

Thermally Robust and Tuneable Phosphorescent Gold(III) Complexes Bearing (N

Phosphorescent mono-cyclometalated gold(III) complexes and their possible applications in organic light emitting diodes (OLEDs) can be significantly enhanced with their improved thermal stability by suppressing the reductive elimination of the respective ancillary ligands. A rational tuning of the π-conjugation of the cyclometalating ligand in conjunction with the non-conjugated 5,5'-(1-methylethylidene)bis(3-trifluoromethyl)-1H-pyrazole were used as a strategy to achieve room-temperature phosphorescence emission in a new series of gold(III) complexes. Photophysical studies of the newly synthesised and characterised complexes revealed phosphorescent emission of the complexes at room temperature in solution, thin films when doped in poly(methyl methacrylate) (PMMA) as well as in 2-Me-THF at 77 K. The complexes exhibit highly tuneable emission behaviour with photoluminescent quantum efficiencies up to 22 % and excited state lifetimes in the range of 63-300 µs. Detailed photophysical investigations in combination with DFT and TD-DFT calculations support the conclusion that the emission properties are strongly dictated by both the cyclometalating ligand and the ancillary chelating ligand. Thermogravimetric studies further show that the thermal stability of the AuIII complexes has been drastically enhanced, making these complexes more attractive for OLED applications.

Tunable Membrane Potential Reconstituted in Giant Vesicles Promotes Permeation of Cationic Peptides at Nanomolar Concentrations.

We investigate the influence of membrane potential on the permeation of cationic peptides. Therefore, we employ a microfluidic chip capable of capturing giant unilamellar vesicles (GUVs) in physical traps and fast exchange of chemical compounds. Control experiments with calcein proved that the vesicle membranes' integrity is not affected by the physical traps and applied shear forces. Combined with fluorescence correlation spectroscopy, permeation of fluorescently labeled peptides across vesicle membranes can be measured down to the nanomolar level. With the addition of a lipophilic ruthenium(II) complex Ru(C17)22+, GUVs consisting of mixed acyl phospholipids are prepared with a negative membrane potential, resembling the membrane asymmetry in cells. The membrane potential serves as a driving force for the permeation of cationic cell-penetrating peptides (CPPs) nonaarginine (Arg9) and the human immunodeficiency virus trans-activator of transcription (TAT) peptide already at nanomolar doses. Hyperpolarization of the membrane by photo-oxidation of Ru(C17)22+ enhances permeation significantly from 55 to 78% for Arg9. This specific enhancement for Arg9 (cf. TAT) is ascribed to the higher affinity of the arginines to the phosphoserine head groups. On the other hand, permeation is decreased by introducing an additional negative charge in close proximity to the N-terminal arginine residue when changing the fluorophore. In short, with the capability to reconstitute membrane potential as well as shear stress, our system is a suitable platform for modeling the membrane permeability of pharmaceutics candidates. The results also highlight the membrane potential as a major cause of discrepancies between vesicular and cellular studies on CPP permeation.

Metallic nanoparticle contacts for high-yield, ambient-stable molecular-monolayer devices.

Accessing the intrinsic functionality of molecules for electronic applications1-3, light emission4 or sensing5 requires reliable electrical contacts to those molecules. A self-assembled monolayer (SAM) sandwich architecture6 is advantageous for technological applications, but requires a non-destructive, top-contact fabrication method. Various approaches ranging from direct metal evaporation6 over poly(3,4-ethylenedioxythiophene) polystyrene sulfonate7 (PEDOT:PSS) or graphene8 interlayers to metal transfer printing9 have been proposed. Nevertheless, it has not yet been possible to fabricate SAM-based devices without compromising film integrity, intrinsic functionality or mass-fabrication compatibility. Here we develop a top-contact approach to SAM-based devices that simultaneously addresses all these issues, by exploiting the fact that a metallic nanoparticle can provide a reliable electrical contact to individual molecules10. Our fabrication route involves first the conformal and non-destructive deposition of a layer of metallic nanoparticles directly onto the SAM (itself laterally constrained within circular pores in a dielectric matrix, with diameters ranging from 60 nanometres to 70 micrometres), and then the reinforcement of this top contact by direct metal evaporation. This approach enables the fabrication of thousands of identical, ambient-stable metal-molecule-metal devices. Systematic variation of the composition of the SAM demonstrates that the intrinsic molecular properties are not affected by the nanoparticle layer and subsequent top metallization. Our concept is generic to densely packed layers of molecules equipped with two anchor groups, and provides a route to the large-scale integration of molecular compounds into solid-state devices that can be scaled down to the single-molecule level.

Highly Stable and Strongly Emitting N-Heterocyclic Carbene Platinum(II) Biaryl Complexes.

C^C cyclometalated platinum(II) triplet emitters bearing electronically different N-heterocyclic carbenes-(1,3-diisopropyl-4-(trifluoromethyl)-imidazol-2-ylidene (d), 1,3-diisopropyl-benzimidazol-2-ylidene (e), and 1,3-diisopropyl-imidazol-2-ylidene (f))-as neutral ligands and biphenyl (bph) as well as its fluorinated derivative octafluorobiphenyl (oFbph) as dianionic cyclometalating ancillary ligand were synthesized and structurally characterized by 1H, 13C, 19F, and 195Pt NMR, single crystal X-ray diffraction, and HR-ESI-MS studies. Detailed photophysical investigations carried out reveal a strong influence on the excited-state properties exerted by the electronic nature of the N-heterocyclic carbenes as well as the fluorine functional groups on the ancillary biphenyl moiety. The solid-state structures of all complexes reveal a nearly planar and slightly distorted square planar geometry around the platinum center. Introduction of fluorine groups into the ligand framework leads to a less structured emission centered at 513 nm in poly(methyl methacrylate) (PMMA) thin films, compared to the highly structured emission profile of the bph analogues. Additionally, a hypsochromic shift of approximately 10-12 nm was found in the absorption as well as in the emission profiles and is attributed to the electron deficient nature of the oFbph ligand. Three wt % of the compounds doped in PMMA exhibit photoluminescence efficiencies as high as 92% in thin films. DFT and TD-DFT calculations on selected molecules revealed the charge transfer to be an admixture of intraligand (3ILCT) and metal-to-ligand charge transfer (3MLCT) and the frontier orbitals corresponding to the emission to be mainly localized on the bph and oFbph ligands, which is consistent with the observations from the photophysical investigations. The thermal stability of the complexes evaluated by thermogravimetric analysis (TGA) shows an enhanced thermal stability for the complexes bearing fluorine functional groups.

Harnessing White-Light Luminescence via Tunable Singlet-and Triplet-Derived Emissions Based on Gold(III) Complexes.

White light emitting gold(III) complexes were synthesized by tuning the percentage of metal dπ contribution in the charge transfer. This was achieved through specific tailoring of the ligand scaffold, which led to increase in the HOMO π-energy properties, resulting in a decrease of efficiency on the intersystem crossing (ISC). As a consequence, monomolecular based singlet- and triplet-derived emission covering the entire visible spectrum with quantum yield up to 28 % and CIE-1931 chromaticity coordinates of (0.29, 0.33) to (0.32, 0.40) could be obtained. Furthermore, two complexes displayed excitation-dependent emission property due to hyper-ISC allowing the regulation of the ratio between fluorescence versus phosphorescence intensity and accomplish precise tuning of white light emission.

Rationally Designed Blue Triplet Emitting Gold(III) Complexes Based on a Phenylpyridine-Derived Framework.

A series of blue-emitting phosphorescent mono-cyclometalated AuIII complexes have been successfully synthesized. Tailoring the substitutions on the phenylpyridine (ppy) ligand scaffold with electron-withdrawing fluorine groups on the phenyl ring to achieve stabilization of the HOMO and an electron-donating dimethylamino group on the pyridine ring to destabilize the LUMO resulted in a large energy gap and bestowed on the gold(III) complexes high-energy emission and high quantum efficiencies. The results of cyclic voltammetry studies suggested a predominantly redox event localized on the cyclometalated ligand. Thermogravimetric analysis of selected complexes revealed a high stability up to 280 °C, thus the complexes are suitable for device fabrication through vacuum-deposition. Photophysical investigations performed on all the derivatives revealed phosphorescence emission in neat solid, solution, doped in poly(methyl methacrylate) (PMMA) films at room temperature as well as in rigidified glass media (2-MeTHF) at 77 K. A high photoluminescent quantum efficiency of 28 % was obtained for a complex in PMMA, the highest quantum yield reported for a blue-emitting gold(III) complex.

Charge Transport and Conductance Switching of Redox-Active Azulene Derivatives.

Azulene (Az) is a non-alternating, aromatic hydrocarbon composed of a five-membered, electron-rich and a seven-membered, electron-poor ring; an electron distribution that provides intrinsic redox activity. By varying the attachment points of the two electrode-bridging substituents to the Az center, the influence of the redox functionality on charge transport is evaluated. The conductance of the 1,3 Az derivative is at least one order of magnitude lower than those of the 2,6 Az and 4,7 Az derivatives, in agreement with density functional theory (DFT) calculations. In addition, only 1,3 Az exhibits pronounced nonlinear current-voltage characteristics with hysteresis, indicating a bias-dependent conductance switching. DFT identifies the LUMO to be nearest to the Fermi energy of the electrodes, but to be an active transport channel only in the case of the 2,6 and the 4,7 Az derivatives, whereas the 1,3 Az derivative uses the HOMO at low and the LUMO+1 at high bias. In return, the localized, weakly coupled LUMO of 1,3 Az creates a slow electron-hopping channel responsible for the voltage-induced switching due to the occupation of a single molecular orbital (MO).

Tunable and Efficient White Light Phosphorescent Emission Based on Single Component N-Heterocyclic Carbene Platinum(II) Complexes.

A new class of cyclometalated pyridine N-heterocyclic carbene (NHC) Pt(II) complexes with electronically different alkyne derivatives (C≡CR; R = C6H4C(CH3)3 (1), C6H5 (2), C6H4F (3), C6H3(CF3)2 (4)) as ancillary ligands were synthesized, and the consequences of the electronic properties of the different substituted phenylacetylene ligands on the phosphorescent emission efficiencies were studied, where C≡CC6H4C(CH3)3 = 4-tert-butylphenylacetylene, C≡CC6H5 = phenylacetylene, C≡CC6H4F = 4-fluorophenylacetylene, and C≡CC6H3(CF3)2 = 3,5-bis(trifluoromethyl)phenylacetylene. Structural characterization, electrochemistry, and photophysical investigations were performed for all four compounds. Moreover, the emission quantum efficiencies and wavelength emission intensities of the complexes were also recorded in different weight percents in poly(methyl methacrylate) films (PMMA) and evaluated in the CIE-1931 chromaticity diagram. The square planar coordination geometry with the alkynyl ligands was corroborated for complexes 1, 2, and 3 by single crystal X-ray diffraction studies. These complexes show tunable monomeric high energy triplet emission and an additional concentration-dependent low-energy excimer-based phosphorescence. While adopting weight percent concentrations between 15 and 25%, the two emission bands covering the entire visible spectrum were obtained with these particular complexes displaying the properties of an efficient white light triplet emitter with excellent CIE-1931 coordinates (0.31, 0.33). On the basis of the high luminescent quantum efficiency of over 50% for white light emission, these compounds could be potentially useful for white organic light-emitting diodes (WOLEDs) based applications.

Electronic communication in phosphine substituted bridged dirhenium complexes - clarifying ambiguities raised by the redox non-innocence of the C4H2- and C4-bridges.

The mononuclear rhenium carbyne complex trans-[Re(C[triple bond, length as m-dash]CSiMe3)([triple bond, length as m-dash]C-Me)(PMe3)4][PF6] (2) was prepared in 90% yield by heating a mixture of the dinitrogen complex trans-[ReCl(N2)(PMe3)4] (1), TlPF6, and an excess of HC[triple bond, length as m-dash]CSiMe3. 2 could be deprotonated with KOtBu to the vinylidene complex trans-[Re(C[triple bond, length as m-dash]CSiMe3)([double bond, length as m-dash]C[double bond, length as m-dash]CH2)(PMe3)4] (3) in 98% yield. Oxidation of 3 with 1.2 equiv. of [Cp2Fe][PF6] at -78 °C gave the Cß-C'ß coupled dinuclear rhenium biscarbyne complex trans-[(Me3SiC[triple bond, length as m-dash]C)(PMe3)4Re[triple bond, length as m-dash]C-CH2-CH2-C[triple bond, length as m-dash]Re(PMe3)4(C[triple bond, length as m-dash]CSiMe3)][PF6]2 (5) in 92% yield. Deprotonation of 5 with an excess of KOtBu in THF produced the diamagnetic trans-[(Me3SiC[triple bond, length as m-dash]C)(PMe3)4Re[double bond, length as m-dash]C[double bond, length as m-dash]CH-CH[double bond, length as m-dash]C[double bond, length as m-dash]Re(PMe3)4(C[triple bond, length as m-dash]CSiMe3)] complex (E-6(S)) in 87% yield with an E-butadienediylidene bridge. Density functional theory (DFT) calculations of E-6(S) confirmed its singlet ground state. The Z-form of 6 (Z-6(S)) could not be observed, which is in accord with its DFT calculated 17.8 kJ mol(-1) higher energy. Oxidation of E-6 with 2 equiv. of [Cp2Fe][PF6] resulted in the stable diamagnetic dicationic trans-[(Me3SiC[triple bond, length as m-dash]C)(PMe3)4Re[triple bond, length as m-dash]C-CH[double bond, length as m-dash]CH-C[triple bond, length as m-dash]Re(PMe3)4(C[triple bond, length as m-dash]CSiMe3)][PF6]2 complex (E-6[PF6]2) with an ethylenylidene dicarbyne structure of the bridge. The paramagnetic mixed-valence (MV) complex E-6[PF6] was obtained by comproportionation of E-6(S) and E-6[PF6]2 or by oxidation of E-6(S) with 1 equiv. of [Cp2Fe][PF6]. The dicationic trans-[(Me3SiC[triple bond, length as m-dash]C)(PMe3)4Re[triple bond, length as m-dash]C-C[triple bond, length as m-dash]C-C[triple bond, length as m-dash]Re(PMe3)4(C[triple bond, length as m-dash]CSiMe3)][PF6]2 (7[PF6]2) complex, attributed a butynedi(triyl) bridge structure, was obtained by deprotonation of E-6[PF6]2 with KOtBu followed by oxidation with 2 equiv. of [Cp2Fe][PF6]. The neutral complex 7 could be accessed best by reduction of 7[PF6]2 with KH in the presence of 18-crown-6. According to DFT calculations 7 possesses two equilibrating electronic states: diamagnetic 7(S) and triplet 7(F) with ferromagnetically coupled spins. The latter is calculated to be 5.2 kcal mol(-1) lower in energy than 7(S). There is experimental evidence that 7(S) prevails in solution. 7 could not be isolated in the crystalline state and is unstable transforming mainly by H-abstraction to give E-6(S). UV-Vis-NIR spectroscopy for the dinuclear rhenium complexes E-6(S), E-6[PF6] and E-6[PF6]2, as well as EPR spectroscopic and variable-temperature magnetization measurements for the MV complex E-6[PF6] were also conducted. Spectro-electrochemical reduction studies on 7[PF6]2 allowed the characterization of the mono- and direduced forms of 7(+) and 7 by means of IR- and UV-Vis-NIR-spectroscopy and revealed the chemical fate of the higher reduced form.

Field-induced conductance switching by charge-state alternation in organometallic single-molecule junctions.

Charge transport through single molecules can be influenced by the charge and spin states of redox-active metal centres placed in the transport pathway. These intrinsic properties are usually manipulated by varying the molecule's electrochemical and magnetic environment, a procedure that requires complex setups with multiple terminals. Here we show that oxidation and reduction of organometallic compounds containing either Fe, Ru or Mo centres can solely be triggered by the electric field applied to a two-terminal molecular junction. Whereas all compounds exhibit bias-dependent hysteresis, the Mo-containing compound additionally shows an abrupt voltage-induced conductance switching, yielding high-to-low current ratios exceeding 1,000 at bias voltages of less than 1.0 V. Density functional theory calculations identify a localized, redox-active molecular orbital that is weakly coupled to the electrodes and closely aligned with the Fermi energy of the leads because of the spin-polarized ground state unique to the Mo centre. This situation provides an additional slow and incoherent hopping channel for transport, triggering a transient charging effect in the entire molecule with a strong hysteresis and large high-to-low current ratios.