Non-hematopoietic deficiency of proprotein convertase subtilisin/kexin type 9 deficiency leads to more severe anemia in a murine model of sickle cell disease.

Proprotein convertase subtilisin/kexin type 9 (PCSK9) deficiency leads to lower cholesterol and is associated with reduced vascular complications in the general population. Cholesterol lowering may also have beneficial effects in sickle cell disease (SCD). The objective of this study was to determine effects of PCSK9 deficiency in a mouse model of SCD. Bone marrow transplantation (BMT) was performed from donor SCD mice to wild-type, PCSK9-deficient, and LDLR-deficient recipients to generate SCD controls (Pcsk9+/+, SCDbmt) with preserved PCSK9 status, SCD mice with deficiency of PCSK9 (Pcsk9-/-, SCDbmt), and SCD mice with deficiency of LDLR (Ldlr-/-, SCDbmt). Although cholesterol levels were lower in Pcsk9-/-, SCDbmt mice compared to Pcsk9+/+, SCDbmt mice, anemia was more severe in Pcsk9-/-, SCDbmt mice. Increased reticulocytosis, enhanced ex vivo erythrocyte sickling, and increased erythrocyte phosphatidylserine exposure was also observed. Livers, spleens, and kidneys contained increased iron in Pcsk9-/-, SCDbmt mice compared to Pcsk9+/+, SCDbmt mice consistent with greater hemolysis. SCD mice with deficiency of LDLR (Ldlr-/-, SCDbmt mice) had similar anemia as Ldlr+/+, SCDbmt mice despite higher serum cholesterol. In conclusion, deficiency of PCSK9 is associated with worsened anemia in SCD mice due to increased hemolysis. These findings may have implications for lipid-lowering strategies in patients with SCD, as well as for potential novel modifiers of anemia severity.

Isolation and Structure of Cancer Cell Growth Inhibitory Tetracyclic Triterpenoids from the Zimbabwean Monadenium lugardae.

The Zimbabwean medicinal plant Monadenium lugardae was evaluated as a potential source of new anticancer constituents. Four new tetracyclic triterpene (1-4) were isolated, accompanied by four previously known triterpenes (5-8). Against a panel of human tumor cell lines, lugardstatins 1 (1) and 2 (2) had good cancer cell growth inhibitory activity. All of the triterpene structures (1-8) were established by 1D and 2D NMR spectrometric and HR mass spectrometric analysis.

Biologically improved nanofibrous scaffolds for cardiac tissue engineering.

Nanofibrous structure developed by electrospinning technology provides attractive extracellular matrix conditions for the anchorage, migration and differentiation of stem cells, including those responsible for regenerative medicine. Recently, biocomposite nanofibers consisting of two or more polymeric blends are electrospun more tidily in order to obtain scaffolds with desired functional and mechanical properties depending on their applications. The study focuses on one such an attempt of using copolymer Poly(l-lactic acid)-co-poly (ε-caprolactone) (PLACL), silk fibroin (SF) and Aloe Vera (AV) for fabricating biocomposite nanofibrous scaffolds for cardiac tissue engineering. SEM micrographs of fabricated electrospun PLACL, PLACL/SF and PLACL/SF/AV nanofibrous scaffolds are porous, beadless, uniform nanofibers with interconnected pores and obtained fibre diameter in the range of 459 ± 22 nm, 202 ± 12 nm and 188 ± 16 nm respectively. PLACL, PLACL/SF and PLACL/SF/AV electrospun mats obtained at room temperature with an elastic modulus of 14.1 ± 0.7, 9.96 ± 2.5 and 7.0 ± 0.9 MPa respectively. PLACL/SF/AV nanofibers have more desirable properties to act as flexible cell supporting scaffolds compared to PLACL for the repair of myocardial infarction (MI). The PLACL/SF and PLACL/SF/AV nanofibers had a contact angle of 51 ± 12° compared to that of 133 ± 15° of PLACL alone. Cardiac cell proliferation was increased by 21% in PLACL/SF/AV nanofibers compared to PLACL by day 6 and further increased to 42% by day 9. Confocal analysis for cardiac expression proteins myosin and connexin 43 was observed better by day 9 compared to all other nanofibrous scaffolds. The results proved that the fabricated PLACL/SF/AV nanofibrous scaffolds have good potentiality for the regeneration of infarcted myocardium in cardiac tissue engineering.

Naturally derived biofunctional nanofibrous scaffold for skin tissue regeneration.

Significant wound healing activity of Aloe vera (AV) and higher elastic strength of Silk fibroin (SF) along with mammalian cell compatibility makes AV and SF an attractive material for tissue engineering. The purpose of the present work was to combine their unique properties, with the advantage of electrospinning to prepare a hybrid transdermal biomaterial for dermal substitutes. The physico-chemical characterization of the developed scaffold showed finer morphology expressing amino and esteric groups with improved hydrophilic properties and favorable tensile strain of 116% desirable for skin tissue engineering. Their biological response showed favorable fibroblast proliferation compared to control which almost increased linearly by (p<0.01) 34.68% on day 3, (p<0.01) 19.13% on day 6, and (p<0.001) 97.86% on day 9 with higher expression of CMFDA, collagen and F-actin proteins. The obtained results prove that the nanofibrous scaffold with synergistic property of AV and SF would be a potential biomaterial for skin tissue regeneration.

Xylan polysaccharides fabricated into nanofibrous substrate for myocardial infarction.

Myocardial infarction, a main cause of heart failure, leads to loss of cardiac tissue impairment of left ventricular function. Repair of diseased myocardium with in vitro engineered cardiac muscle patch/injectable biopolymers with cells may become a viable option for myocardial infarction. We attempted to solve these problems by in vitro study by selecting a plant based polysaccharides beech wood Xylan for the normal functioning of infarcted myocardium. The present study fabricated Xylan based nanofibrous scaffolds cross-linked with glutaraldehyde (Glu) vapors for 24 h, 48 h and 1% Glu blended fibers for the culture of neonatal rat cardiac cells for myocardial infarction. These nanofibers were characterized by SEM, FT-IR, tensile testing and cell culture studies for the normal expression of cardiac proteins. The observed results showed that the Xylan/polyvinyl alcohol (PVA) 24h Glu vapor cross-linked nanofibers (427 nm) having mechanical strength of 2.43 MPa and Young modulus of 3.74 MPa are suitable for the culture of cardiac cells. Cardiac cells proliferation increased only by 11% in Xylan/PVA 24h Glu cross-linked nanofibers compared to control tissue culture plate (TCP). The normal cardiac cell morphology was observed in 24h cross-linked Xylan/PVA nanofibers but 48 h cross-linked fibers cell morphology was changed to flattened and elongated on the fibrous surfaces. Confocal analysis for cardiac expression proteins actinin, connexin 43 was observed normally in 24h Glu cross-linked nanofibers compared to all other nanofibrous scaffolds. The fabricated Xylan/PVA nanofibrous scaffold may have good potential for the normal functioning of infarcted myocardium.

Electrosprayed hydroxyapatite on polymer nanofibers to differentiate mesenchymal stem cells to osteogenesis.

Electrospraying of hydroxyapatite (HA) nanoparticles onto the surface of polymer nanofibers provides a potentially novel substrate for the adhesion, proliferation and differentiation of mesenchymal stem cells (MSCs) into bone tissue regeneration. HA nanoparticles (4%) were electrosprayed on the surface of electrospun polycaprolactone (PCL) nanofibers (420 ± 15 nm) for bone tissue engineering. PCL/HA nanofibers were comparatively characterized with PCL/Collagen (275 ± 56 nm) nanofibers by FT-IR analysis to confirm the presence of HA. Fabricated PCL/HA and PCL/Collagen nanofibers and TCP (control) were used for the differentiation of equine MSC into osteogenic lineages in the presence of DMEM/F12 medium supplemented with ß-glycerophosphate, ascorbic acid and dexamethasone. Cell proliferation and differentiation into an osteogenic lineage was evaluated by MTS assay, SEM observation, ALP activity, ARS staining, quantification of mineral deposition and expression of osteocalcin. Proliferation of MSCs increased significantly (P ⩽ 0.05) up to 12% in PCL/Collagen (day 15) compared to PCL/HA nanofibrous substrate. ALP activity was increased 20% in PCL/HA by day 10 confirming the direction of osteogenic lineage from MSCs differentiation. PCL/HA stimulated an increased mineral secretion up to 26% by day 15 on ARS staining compared to PCL/Collagen nanofibers and showing cuboidal morphology by expressing osteocalcin. These results confirmed that the specifically fabricated PCL/HA composite nanofibrous substrate enhanced the differentiation of MSCs into osteogenesis.

Polysaccharide nanofibrous scaffolds as a model for in vitro skin tissue regeneration.

Tissue engineering and nanotechnology have advanced a general strategy combining the cellular elements of living tissue with sophisticated functional biocomposites to produce living structures of sufficient size and function at a low cost for clinical relevance. Xylan, a natural polysaccharide was electrospun along with polyvinyl alcohol (PVA) to produce Xylan/PVA nanofibers for skin tissue engineering. The Xylan/PVA glutaraldehyde (Glu) vapor cross-linked nanofibers were characterized by SEM, FT-IR, tensile testing and water contact angle measurements to analyze the morphology, functional groups, mechanical properties and wettability of the fibers for skin tissue regeneration. The cell-biomaterial interactions were studied by culturing human foreskin fibroblasts on Xylan/PVA Glu vapor cross-linked and Xylan/PVA/Glu blend nanofibrous scaffolds. The observed results showed that the mechanical properties (72 %) and fibroblast proliferation significantly increased up to 23 % (P < 0.05) in 48 h Glu vapor cross-linked nanofibers compared to 24 h Glu vapor cross-linked Xylan/PVA nanofibers. The present study may prove that the natural biodegradable Xylan/PVA nanofibrous scaffolds have good potential for fibroblast adhesion, proliferation and cell matrix interactions relevant for skin tissue regeneration.

Fabrication of a nanofibrous scaffold with improved bioactivity for culture of human dermal fibroblasts for skin regeneration.

Engineering dermal substitutes with electrospun nanofibres have lately been of prime importance for skin tissue regeneration. Simple electrospinning technology served to produce nanofibrous scaffolds morphologically and structurally similar to the extracellular matrix of native tissues. The nanofibrous scaffolds of poly(L-lactic acid)-co-poly(ε-caprolactone) (PLACL) and PLACL/gelatin complexes were fabricated by the electrospinning process. These nanofibres were characterized for fibre morphology, membrane porosity, wettability and chemical properties by FTIR analysis to culture human foreskin fibroblasts for skin tissue engineering. The nanofibre diameter was obtained between 282 and 761 nm for PLACL and PLACL/gelatin scaffolds; expressions of amino and carboxyl groups and porosity up to 87% were obtained for these fibres, while they also exhibited improved hydrophilic properties after plasma treatment. The results showed that fibroblasts proliferation, morphology, CMFDA dye expression and secretion of collagen were significantly increased in plasma-treated PLACL/gelatin scaffolds compared to PLACL nanofibrous scaffolds. The obtained results prove that the plasma-treated PLACL/gelatin nanofibrous scaffold is a potential biocomposite material for skin tissue regeneration.

Simultaneous electrospin-electrosprayed biocomposite nanofibrous scaffolds for bone tissue regeneration.

Currently, the application of nanotechnology in bone tissue regeneration is a challenge for the fabrication of novel bioartificial bone grafts. These nanostructures are capable of mimicking natural extracellular matrix with effective mineralization for successful regeneration of damaged tissues. The simultaneous electrospraying of nanohydroxyapatite (HA) on electrospun polymeric nanofibrous scaffolds might be more promising for bone tissue regeneration. In the current study, nanofibrous scaffolds of gelatin (Gel), Gel/HA (4:1 blend), Gel/HA (2:1 blend) and Gel/HA (electrospin-electrospray) were fabricated for this purpose. The morphology, chemical and mechanical stability of nanofibres were evaluated by means of field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy and with a universal tensile machine, respectively. The in vitro biocompatibility of different nanofibrous scaffolds was determined by culturing human foetal osteoblasts and investigating the proliferation, alkaline phosphatase (ALP) activity and mineralization of cells. The results of cell proliferation, ALP activity and FESEM studies revealed that the combination of electrospinning of gelatin and electrospraying of HA yielded biocomposite nanofibrous scaffolds with enhanced performances in terms of better cell proliferation, increased ALP activity and enhanced mineralization, making them potential substrates for bone tissue regeneration.

Biomimetic hydroxyapatite-containing composite nanofibrous substrates for bone tissue engineering.

The fracture of bones and large bone defects owing to various traumas or natural ageing is a typical type of tissue malfunction. Surgical treatment frequently requires implantation of a temporary or permanent prosthesis, which is still a challenge for orthopaedic surgeons, especially in the case of large bone defects. Mimicking nanotopography of natural extracellular matrix (ECM) is advantageous for the successful regeneration of damaged tissues or organs. Electrospun nanofibre-based synthetic and natural polymer scaffolds are being explored as a scaffold similar to natural ECM for tissue engineering applications. Nanostructured materials are smaller in size falling, in the 1-100 nm range, and have specific properties and functions related to the size of the natural materials (e.g. hydroxyapatite (HA)). The development of nanofibres with nano-HA has enhanced the scope of fabricating scaffolds to mimic the architecture of natural bone tissue. Nanofibrous substrates supporting adhesion, proliferation, differentiation of cells and HA induce the cells to secrete ECM for mineralization to form bone in bone tissue engineering. Our laboratory (NUSNNI, NUS) has been fabricating a variety of synthetic and natural polymer-based nanofibrous substrates and synthesizing HA for blending and spraying on nanofibres for generating artificial ECM for bone tissue regeneration. The present review is intended to direct the reader's attention to the important subjects of synthetic and natural polymers with HA for bone tissue engineering.

Continuous nanostructures for the controlled release of drugs.

The annual world wide market for controlled release of polymer systems which extends beyond drug delivery is now estimated to $60 billion and these systems are used by over 100 million people each year. It was estimated that drug delivery will play a pivotal role in approximately 40% of all pharmaceutical sales in near future. Novel methods of drug delivery will not only result in more effective and efficacious treatments but also generates new niche markets to provide greater intellectual property protection to already existing drug formulations. Recently, biodegradable electrospun polymer nanofibrous substrate as drug carrier seems to be a promising method for delivering anticancer drugs, especially in postoperative local chemotherapy. Alternatively drug release can be triggered by the environment or other external events such as changes in pH, temperature, or the presence of analyte such as glucose. In general, controlled release of polymer systems delivering drugs in the optimum dosage for long periods is to increase the efficacy of drug, reducing patient compliance. Recent research for the use of nanotechnology (nanoparticle and nanofibers) in drug delivery suggests that the technology might solve problems in the areas such as controlled release, various topical administration, gut absorption and targeted systemic delivery. This review article described the applications of polymer nanoparticles and nanofibers for loading potential drugs for the controlled release to target incurable diseases.

Electrospun nanostructured scaffolds for bone tissue engineering.

The current challenge in bone tissue engineering is to fabricate a bioartificial bone graft mimicking the extracellular matrix (ECM) with effective bone mineralization, resulting in the regeneration of fractured or diseased bones. Biocomposite polymeric nanofibers containing nanohydroxyapatite (HA) fabricated by electrospinning could be promising scaffolds for bone tissue engineering. Nanofibrous scaffolds of poly-l-lactide (PLLA, 860+/-110 nm), PLLA/HA (845+/-140 nm) and PLLA/collagen/HA (310+/-125 nm) were fabricated, and the morphology, chemical and mechanical characterization of the nanofibers were evaluated using scanning electron microscopy, Fourier transform infrared spectroscopy and tensile testing, respectively. The in vitro biocompatibility of different nanofibrous scaffolds was also assessed by growing human fetal osteoblasts (hFOB), and investigating the proliferation, alkaline phosphatase activity (ALP) and mineralization of cells on different nanofibrous scaffolds. Osteoblasts were found to adhere and grow actively on PLLA/collagen/HA nanofibers with enhanced mineral deposition of 57% higher than the PLLA/HA nanofibers. The synergistic effect of the presence of an ECM protein, collagen and HA in PLLA/collagen/HA nanofibers provided cell recognition sites together with apatite for cell proliferation and osteoconduction necessary for mineralization and bone formation. The results of our study showed that the biocomposite PLLA/collagen/HA nanofibrous scaffold could be a potential substrate for the proliferation and mineralization of osteoblasts, enhancing bone regeneration.

Aligned and random nanofibrous substrate for the in vitro culture of Schwann cells for neural tissue engineering.

The current challenge in peripheral nerve tissue engineering is to produce an implantable scaffold capable of bridging long nerve gaps that will produce results similar to autograft without requiring the harvest of autologous donor tissue. Aligned and random polycaprolactone/gelatin (PCL/gelatin) nanofibrous scaffolds were fabricated for the in vitro culture of Schwann cells that assist in directing the growth of regenerating axons in nerve tissue engineering. The average fiber diameter attained by electrospinning of polymer blend (PCL/gelatin) ranged from 232+/-194 to 160+/-86nm with high porosity (90%). Blending PCL with gelatin resulted in increased hydrophilicity of nanofibrous scaffolds and yielded better mechanical properties, approaching those of PCL nanofibers. The biocompatibility of fabricated nanofibers was assessed for culturing and proliferation of Schwann cells by MTS assay. The results of the MTS assay and scanning electron microscopy confirmed that aligned and random PCL/gelatin nanofibrous scaffolds are suitable substrates for Schwann cell growth as compared to PCL nanofibrous scaffolds for neural tissue engineering.

Antineoplastic agents. 570. Isolation and structure elucidation of bacillistatins 1 and 2 from a marine Bacillus silvestris.

Two new cyclodepsipeptides designated bacillistatins 1 (1) and 2 (2) have been isolated from cultures of a sample of Bacillus silvestris that was obtained from a Pacific Ocean (southern Chile) crab. Each 12-unit cyclodepsipeptide strongly inhibited growth of a human cancer cell line panel, with GI(50)'s of 10(-4)-10(-5) microg/mL, and each compound was active against antibiotic-resistant Streptococcus pneumoniae. The structures were elucidated by a combination of X-ray diffraction and mass and 2D NMR spectroscopic analyses, together with chemical degradation.

Nanostructured biocomposite substrates by electrospinning and electrospraying for the mineralization of osteoblasts.

Nanotechnology has enabled the engineering of nanostructured materials to meet current challenges in bone replacement therapies. Biocomposite nanofibrous scaffolds of poly(l-lactic acid)-co-poly(epsilon-caprolactone), gelatin and hydroxyapatite (HA) were fabricated by combining the electrospinning and electrospraying techniques in order to create a better osteophilic environment for the growth and mineralization of osteoblasts. Electrospraying of HA nanoparticles on electrospun nanofibers helped to attain rough surface morphology ideal for cell attachment and proliferation and also achieve improved mechanical properties than HA blended nanofibers. Nanofibrous scaffolds showed high pore size and porosity up to 90% with fiber diameter in the range of 200-700 nm. Nanofibrous scaffolds were characterized for their functional groups and chemical structure by FTIR and XRD analysis. Studies on cell-scaffold interaction were carried out by culturing human fetal osteoblast cells (hFOB) on both HA blended and sprayed PLACL/Gel scaffolds and assessing their growth, proliferation, mineralization and enzyme activity. The results of MTS, ALP, SEM and ARS studies confirmed, not only did HA sprayed biocomposite scaffolds showed better cell proliferation but also enhanced mineralization and alkaline phosphatase activity (ALP) proving that electrospraying in combination with electrospinning produced superior and more suitable biocomposite nanofibrous scaffolds for bone tissue regeneration.

Nanotechnology for nanomedicine and delivery of drugs.

Nanotechnology is an emerging technology seeking to exploit distinct technological advances controlling the structure of materials at a reduced dimensional scale approaching individual molecules and their aggregates or supramolecular structures. The manipulation and utilization of materials at nanoscale are expected to be critical drivers of economic growth and development in this century. In recent years, nanoscale sciences and engineering have provided new avenues for engineering materials down to molecular scale precision. The resultant materials have been demonstrated to have enhanced properties and applicability; and these materials are expected to be enabling technologies in the successful development and application of nanomedicine. Nanomedicine is defined as the monitoring, repair, construction, and control of human biological systems at the molecular level using engineered nanodevices and nanostructures. Electrospinning is a simple and cost-effective technique, capable of producing continuous fibers of various materials from polymers to ceramics. The electrospinning technique is used for the preparation of nanofibers and macroporous scaffolds intended for drug delivery and tissue engineering. These have special characteristics in terms of fabrication, porosity, variable diameters, topology and mechanical properties. This review summarizes the recent developments in utilizing nanofibers for drug delivery and tissue engineering applications.

Antineoplastic agents. 558. Ampelocissus sp. cancer cell growth inhibitory constituents.

An investigation of the Phillippine Ampelocissus sp. roots for cancer cell growth inhibitory components led to the isolation of a new acetogenin characterized as 22-epicalamistrin (1) employing primarily 2D NMR and high-resolution mass spectral analysis. Two other antineoplastic constituents proved to be the known acetogenin uvaribonin (2) and chalcone 3. Constituents 1-3 were all found to show significant cancer cell growth inhibitory activity against a panel of human cancer cell lines.

Surface modified electrospun nanofibrous scaffolds for nerve tissue engineering.

The development of biodegradable polymeric scaffolds with surface properties that dominate interactions between the material and biological environment is of great interest in biomedical applications. In this regard, poly-ε-caprolactone (PCL) nanofibrous scaffolds were fabricated by an electrospinning process and surface modified by a simple plasma treatment process for enhancing the Schwann cell adhesion, proliferation and interactions with nanofibers necessary for nerve tissue formation. The hydrophilicity of surface modified PCL nanofibrous scaffolds (p-PCL) was evaluated by contact angle and x-ray photoelectron spectroscopy studies. Naturally derived polymers such as collagen are frequently used for the fabrication of biocomposite PCL/collagen scaffolds, though the feasibility of procuring large amounts of natural materials for clinical applications remains a concern, along with their cost and mechanical stability. The proliferation of Schwann cells on p-PCL nanofibrous scaffolds showed a 17% increase in cell proliferation compared to those on PCL/collagen nanofibrous scaffolds after 8 days of cell culture. Schwann cells were found to attach and proliferate on surface modified PCL nanofibrous scaffolds expressing bipolar elongations, retaining their normal morphology. The results of our study showed that plasma treated PCL nanofibrous scaffolds are a cost-effective material compared to PCL/collagen scaffolds, and can potentially serve as an ideal tissue engineered scaffold, especially for peripheral nerve regeneration.

Electrospun-modified nanofibrous scaffolds for the mineralization of osteoblast cells.

Biocompatible polycaprolactone (PCL) and hydroxyapatite (HA) were fabricated into nanofibrous scaffolds for the mineralization of osteoblasts in bone tissue engineering. PCL and PCL/HA nanofibrous surface were modified using oxygen plasma treatment and showing 0 degrees contact angle for the adhesion and mineralization of osteoblast cells. The fiber diameter, pore size and porosity of nanofibrous scaffolds were estimated to be 220-625 nm, 3-20 microm, and 87-92% respectively. The ultimate tensile strength of PCL was about 3.37 MPa and PCL/HA was 1.07 MPa to withstand the long term culture of osteoblasts on nanofibrous scaffolds. Human fetal osteoblast cells (hFOB) were cultured on PCL and PCL/HA surface modified and unmodified nanofibrous scaffolds. The osteoblast proliferation rate was significantly (p < 0.001) increased in surface-modified nanofibrous scaffolds. FESEM showed normal phenotypic cell morphology and mineralization occurred in PCL/HA nanofibrous scaffolds, HA acting as a chelating agent for the mineralization of osteoblast to form bone like apatite for bone tissue engineering. EDX and Alizarin Red-S staining indicated mineral Ca(2+) and phosphorous deposited on the surface of osteoblast cells. The mineralization was significantly increased in PCL/HA-modified nanofibrous scaffolds and appeared as a mineral nodule synthesized by osteoblasts similar to apatite of the natural bone. The present study indicated that the PCL/HA surface-modified nanofibrous scaffolds are potential for the mineralization of osteoblast for bone tissue engineering.

Interaction of cells and nanofiber scaffolds in tissue engineering.

Nanofibers and nanomaterials are potentially recent additions to materials in relation to tissue engineering (TE). TE is the regeneration of biological tissues through the use of cells, with the aid of supporting structures and biomolecules. Mimicking architecture of extracellular matrix is one of the challenges for TE. Biodegradable biopolymer nanofibers with controlled surface and internal molecular structures can be electrospun into mats with specific fiber arrangement and structural integrity for drug delivery and TE applications. The polymeric materials are widely accepted because of their ease of processability and amenability to provide a large variety of cost-effective materials, which help to enhance the comfort and quality of life in modern biomedical and industrial society. Today, nanotechnology and nanoscience approaches to scaffold design and functionalization are beginning to expand the market for drug delivery and TE is forming the basis for highly profitable niche within the industry. This review describes recent advances for fabrication of nanofiber scaffolds and interaction of cells in TE.