A comparative study of 3D measuring methods for monitoring breast volume changes.

Three-dimensional (3D) imaging techniques are promising new tools for measuring breast volume, for example in gender-affirming therapy. Transgender individuals can be treated with gender-affirming hormone therapy (GAHT). A robust method for monitoring breast volume changes is critical to be able to study the effects of feminizing GAHT. The primary aim of this study was to compare the accuracy of three 3D devices (Vectra XT, Artec LEO and iPhone XR) for measuring modest breast volume differences using a mannequin. The secondary aim of this study was to evaluate these methods in several performance domains. We used reference prostheses of increasing volumes and compared the volumes using GOM-inspect software. For Vectra XT 3D images, manufacturer-provided software was used to calculate volumes as well. The scanning methods were ranked based on their performance in a total of five categories: volume estimations, costs, user-friendliness, test subject-friendliness and technical aspects. The 3D models analyzed with GOM-inspect showed relative mean estimate differences from the actual volumes of 9.1% for the Vectra XT, 7.3% for the Artec LEO and 14% for the iPhone XR. For the Vectra XT models analyzed with the built-in software this was 6.2%. Root mean squared errors (RMSE) calculated based on the GOM-inspect volume analyses showed mean RMSEs of 2.27, 2.54 and 8.93 for the Vectra XT, Artec LEO and iPhone XR, respectively. The Vectra software had a mean RMSE of 3.00. In the combined performance ranking, the Vectra XT had the most favorable ranking, followed by the Artec LEO and the iPhone XR. The Vectra XT and Artec LEO are the preferred scanners to monitor breast development due to the combination of higher accuracy and overall performance. The current study shows that 3D techniques can be used to adequately measure modest breast volume differences and therefore will be useful to study for example breast changes in transgender individuals using feminizing GAHT. These observations may also be relevant in other fields of 3D imaging research.

The Cooperation Between Nurses and a New Digital Colleague "AI-Driven Lifestyle Monitoring" in Long-Term Care for Older Adults: Viewpoint.

Technology has a major impact on the way nurses work. Data-driven technologies, such as artificial intelligence (AI), have particularly strong potential to support nurses in their work. However, their use also introduces ambiguities. An example of such a technology is AI-driven lifestyle monitoring in long-term care for older adults, based on data collected from ambient sensors in an older adult's home. Designing and implementing this technology in such an intimate setting requires collaboration with nurses experienced in long-term and older adult care. This viewpoint paper emphasizes the need to incorporate nurses and the nursing perspective into every stage of designing, using, and implementing AI-driven lifestyle monitoring in long-term care settings. It is argued that the technology will not replace nurses, but rather act as a new digital colleague, complementing the humane qualities of nurses and seamlessly integrating into nursing workflows. Several advantages of such a collaboration between nurses and technology are highlighted, as are potential risks such as decreased patient empowerment, depersonalization, lack of transparency, and loss of human contact. Finally, practical suggestions are offered to move forward with integrating the digital colleague.

The Effect of Partial Electrical Insulation of the Tip and Active Needle Length of Monopolar Irreversible Electroporation Electrodes on the Electric Field Line Pattern and Temperature Gradient to Improve Treatment Control.

Unintentional local temperature effects can occur during irreversible electroporation (IRE) treatment, especially near the electrodes, and most frequently near the tip. Partial electrical insulation of the IRE electrodes could possibly control these temperature effects. This study investigated and visualized the effect of partial electrical insulation applied to the IRE electrodes on the electric field line pattern and temperature gradient. Six designs of (partial) electrical insulation of the electrode tip and/or active needle length (ANL) of the original monopolar 19G IRE electrodes were investigated. A semolina in castor oil model was used to visualize the electric field line pattern in a high-voltage static electric field. An optical method to visualize a change in temperature gradient (color Schlieren) was used to image the temperature development in a polyacrylamide gel. Computational models were used to support the experimental findings. Around the electrode tip, the highest electric field line density and temperature gradient were present. The more insulation was applied to the electrodes, the higher the resistance. Tip and ANL insulation together reduced the active area of and around the electrodes, resulting in a visually enlarged area that showed a change in temperature gradient. Electrically insulating the electrode tip together with an adjustment in IRE parameter settings could potentially reduce the uncontrollable influence of the tip and may improve the predictability of the current pathway development.

Thermal Effects of CO2, KTP, and Blue Lasers with a Flexible Fiber Delivery System on Vocal Folds.

OBJECTIVE: To determine the differences in thermal effects on vocal folds between four fiber-routed lasers. METHODS: In this experimental laboratory study the thermal effects of an AcuPulse Duo CO2 (CO2 AP), UltraPulse Duo CO2 (CO2 UP), KTP, and Blue laser were analyzed using a Schlieren technique on a human tissue mimicking gel model. Power, laser duration, laser fiber distance to tissue and mode (continuous wave [CW] vs pulsed [P] modes) were evaluated in varying combinations in order to compare the effects of the tested lasers and to explore the individual effect on thermal expansion and incision depth of each setting. The model was validated by comparing the results from the Schlieren model with histology of ex vivo fresh human vocal folds after laser irradiation using a selection of the same laser settings, and calculating the intraclass correlation coefficient (ICC). RESULTS: One thousand ninety-eight Schlieren experiments and 56 vocal cord experiments were conducted. In comparison with CW mode, less thermal expansion occurred in P mode in all lasers, while incisions were deeper in the CO2 and more superficial in the KTP and Blue lasers. The mean thermal expansion was found to be minimally smaller, whereas incision depth was pronouncedly smaller in the KTP and Blue compared to the CO2 lasers. Duration of laser irradiation was the most important factor of influence on thermal expansion and incision depth for all lasers in both CW and P modes. The ICC for consistency between the results of the Schlieren model and the vocal cord histology was classified from fair to excellent, except for the thermal expansion of the Blue laser, which was classified as poor. CONCLUSION: This study demonstrates important differences in thermal effects between CO2, KTP, and Blue lasers which can be explained by the different physical characteristics of the P modes and divergence of the fiber delivery system. The Schlieren imaging model is a good predictor of the relative thermal effects in vocal fold tissue. Our results can be used as a guidance for ENT surgeons using fiber-routed lasers, in order to achieve effective treatment of vocal fold lesions and prevention of functional impairment of vocal folds.

The vascular occlusion test using multispectral imaging: a validation study : The VASOIMAGE study.

Multispectral imaging (MSI) is a new, non-invasive method to continuously measure oxygenation and microcirculatory perfusion, but has limitedly been validated in healthy volunteers. The present study aimed to validate the potential of multispectral imaging in the detection of microcirculatory perfusion disturbances during a vascular occlusion test (VOT). Two consecutive VOT's were performed on healthy volunteers and tissue oxygenation was measured with MSI and near-infrared spectroscopy (NIRS). Correlations between the rate of desaturation, recovery and the hyperemic area under the curve (AUC) measured by MSI and NIRS were calculated. Fifty-eight volunteers were included. The MSI oxygenation curves showed identifiable components of the VOT, including a desaturation and recovery slope and hyperemic area under the curve, similar to those measured with NIRS. The correlation between the rate of desaturation measured by MSI and NIRS was moderate: r = 0.42 (p = 0.001) for the first and r = 0.41 (p = 0.002) for the second test. Our results suggest that non-contact multispectral imaging is able to measure changes in regional oxygenation and deoxygenation during a vascular occlusion test in healthy volunteers. When compared to measurements with NIRS, correlation of results was moderate to weak, most likely reflecting differences in physiology of the regions of interest and measurement technique.

Optimizing Settings for Office-Based Endoscopic CO2 Laser Surgery Using an Experimental Vocal Cord Model.

OBJECTIVES/HYPOTHESIS: To provide insight in the thermal effects of individual laser settings in target tissues to optimize flexible endoscopic CO2 laser surgery treatment. STUDY DESIGN: Experimental laboratory study. METHODS: Thermal effects of the CO2 laser using a fiber delivery system were visualized using the color Schlieren technique in combination with a polyacrylamide gel tissue model. Variable settings were used for emission mode, power, laser fiber distance, and laser duration, which were evaluated in every possible combination. Collateral thermal expansion and incision depth were measured. To validate the model, the results were compared to histology after CO2 laser irradiation of ex vivo human vocal cords, and the intraclass correlation coefficient was calculated. Thermal damage and incision depth were measured by a blinded pathologist. RESULTS: Of all parameters studied, duration of laser irradiation had the greatest effect on thermal expansion. Increased distance between laser tip and target tissue resulted in significantly reduced incision depth and increased thermal expansion. Pulsed emission modes led to increased incision depths. The intraclass correlation coefficient for consistency between the model setup and the ex vivo human vocal cords was classified as "fair." CONCLUSIONS: By using high-intensity pulsed lasers at minimal distance to the target tissue, exposure times and subsequent damage to surrounding tissue can be reduced. If an evaporation technique is used, lower power in continuous wave at a larger distance to the target tissue will lead to superficial but broader thermal effects. The model setup used in this study is a valid model to investigate laser-induced thermal effects in vocal cord tissue. LEVEL OF EVIDENCE: NA Laryngoscope, 130:E680-E685, 2020.

Enhanced topical cutaneous delivery of indocyanine green after various pretreatment regimens: comparison of fractional CO2 laser, fractional Er:YAG laser, microneedling, and radiofrequency.

Different devices have been used to enhance topical drug delivery. Aim of this study was to compare the efficacy of different skin pretreatment regimens in topical drug delivery. In six ex vivo human abdominal skin samples, test regions were pretreated with fractional CO2 and Er:YAG laser (both 70 and 300 µm ablation depth, density of 5%), microneedling (500 µm needle length), fractional radiofrequency (ablation depth of ± 80-90 µm), and no pretreatment. The fluorescent agent indocyanine green (ICG) was applied. After 3 h, fluorescence intensity was measured at several depths using fluorescence photography. Significantly higher surface fluorescence intensities were found for pretreatment with fractional Er:YAG and CO2 laser and for microneedling vs. no pretreatment (p < 0.05), but not for radiofrequency vs. no pretreatment (p = 0.173). Fluorescence intensity was highest for the Er:YAG laser with 300 µm ablation depth (mean 38.89 arbitrary units; AU), followed by microneedling (33.02 AU) and CO2 laser with 300 µm ablation depth (26.25 AU). Pretreatment with both lasers with 300 µm ablation depth gave higher fluorescence intensity than with 70 µm ablation depth (Er:YAG laser, 21.65; CO2 laser, 18.50 AU). Mean fluorescence intensity for radiofrequency was 15.27 AU. Results were comparable at 200 and 400 µm depth in the skin. Pretreatment of the skin with fractional CO2 laser, fractional Er:YAG laser, and microneedling is effective for topical ICG delivery, while fractional radiofrequency is not. Deeper laser ablation results in improved ICG delivery. These findings may be relevant for the delivery of other drugs with comparable molecular properties.

An Evaluation Framework for Spectral Filter Array Cameras to Optimize Skin Diagnosis.

Comparing and selecting an adequate spectral filter array (SFA) camera is application-specific and usually requires extensive prior measurements. An evaluation framework for SFA cameras is proposed and three cameras are tested in the context of skin analysis. The proposed framework does not require application-specific measurements and spectral sensitivities together with the number of bands are the main focus. An optical model of skin is used to generate a specialized training set to improve spectral reconstruction. The quantitative comparison of the cameras is based on reconstruction of measured skin spectra, colorimetric accuracy, and oxygenation level estimation differences. Specific spectral sensitivity shapes influence the results directly and a 9-channel camera performed best regarding the spectral reconstruction metrics. Sensitivities at key wavelengths influence the performance of oxygenation level estimation the strongest. The proposed framework allows to compare spectral filter array cameras and can guide their application-specific development.

Gender-Affirming Hormone Treatment Induces Facial Feminization in Transwomen and Masculinization in Transmen: Quantification by 3D Scanning and Patient-Reported Outcome Measures.

INTRODUCTION: Hormone treatment induces feminization of the body in transwomen and masculinization in transmen. However, the effect of hormone treatment on facial characteristics is still unknown. AIM: We aimed to study whether hormone treatment induces facial feminization and masculinization and how this potential change affects satisfaction and self-esteem. METHODS: In this single-center cohort study, we included 27 transwomen and 15 transmen who received standardized hormone treatment in the Center of Expertise on Gender Dysphoria, VU University Medical Center Amsterdam. Facial 3-dimensional images were obtained at baseline and at 3 and 12 months. At each image, 22 facial landmarks were placed. Furthermore, the FACE-Q Satisfaction with Facial Appearance Overall and the Rosenberg self-esteem scale were obtained at the same measurement points. MAIN OUTCOME MEASURES: The main outcome measures included the relative local shift of skin in millimeters in the 22 landmarks in the transverse (x-axis), coronal (y-axis), and sagittal (z-axis) anatomic axes, the color maps, and the outcomes of the questionnaires. RESULTS: After 12 months, cheek tissue in transwomen increased, with 0.50 mm (95% CI 0.04-0.96) in the x-axis and 1.08 mm (95% CI 0.31-1.85) in the z-axis. Tissue in the jaws decreased with -0.60 mm (95% CI -1.28-0.08) in the x-axis and -0.18 mm (95% CI -0.03-0.33) in the y-axis. Cheek tissue in transmen decreased with -0.45 mm (95% CI -1.00-0.11) in the x-axis and -0.84 mm (95% CI -1.92-0.25) in the z-axis. These changes already started after 3 months. An increase in satisfaction with the facial appearance was found in both transwomen and transmen. There were no changes in reported self-esteem. CLINICAL IMPLICATION: These results could lead to more realistic expectations of facial changes. Furthermore, our results suggest that the face continues to change for at least a year, which could suggest that performing facial feminization surgery after 1 year of hormone treatment might be too early. STRENGTH & LIMITATIONS: This study is the first that provides insight into the facial changes in transgender individuals receiving hormone treatment, and it introduces an objective method to examine (small) facial changes. Our study is limited by the poor reliability of the landmarks, the difficulty of facial fixation, and the lack of gender-specific questions in the questionnaires. CONCLUSIONS: Hormone treatment in transwomen induces an increase in cheek tissue and a decrease in jaw tissue. In transmen a tendency of decrease in cheek tissue and an increase in jaw tissue was found. These changes are in the direction of the desired gender. Tebbens M, Nota NM, Liberton NPTJ, et al. Gender-Affirming Hormone Treatment Induces Facial Feminization in Transwomen and Masculinization in Transmen: Quantification by 3D Scanning and Patient-Reported Outcome Measures. J Sex Med 2019;16:746-754.

Drug penetration enhancement techniques in ablative fractional laser assisted cutaneous delivery of indocyanine green.

BACKGROUND AND OBJECTIVES: Topical drug delivery can be increased by pretreatment of the skin with ablative fractional laser (AFXL). Several physical penetration enhancement techniques have been investigated to further improve AFXL-assisted drug delivery. This study investigated the influence of three of these techniques, namely massage, acoustic pressure wave treatment, and pressure vacuum alterations (PVP) on the distribution of the fluorescent drug indocyanine green (ICG) at different depths in the skin after topical application on AFXL pretreated skin. MATERIALS AND METHODS: In ex vivo human skin, test regions were pretreated with AFXL (10,600 nm, channel depth 300 µm, channel width 120 µm, density 15%). Subsequently, ICG was applied, followed by massage, acoustic pressure wave treatment or PVP. ICG fluorescence intensity (FI) was assessed after 1, 3, and 24 hours at several depths using fluorescence photography. RESULTS: FI was higher when using enhancement techniques compared to control (AFXL-only) up to 3 hours application time (P < 0.05). After 3 hours, mean surface FI was highest after acoustic pressure wave treatment (61.5 arbitrary units; AU), followed by massage (57.5AU) and PVP (46.9AU), respectively (for comparison: AFXL-only 31.6AU, no pretreatment 14.9AU). Comparable or higher FI was achieved already after 1 hour with enhancement techniques compared to 3-24 hours application time without. After 24 hours, no significant differences between enhancement techniques and AFXL-only were observed (P = 0.31). CONCLUSION: Penetration enhancement techniques, especially acoustic pressure wave treatment and massage, result in improved drug accumulation in AFXL-pretreated skin and reduce the application time needed. Lasers Surg. Med. © 2019 The Authors. Lasers in Surgery and Medicine Published by Wiley Periodicals, Inc.

A Spectral Filter Array Camera for Clinical Monitoring and Diagnosis: Proof of Concept for Skin Oxygenation Imaging.

The emerging technology of spectral filter array (SFA) cameras has great potential for clinical applications, due to its unique capability for real time spectral imaging, at a reasonable cost. This makes such cameras particularly suitable for quantification of dynamic processes such as skin oxygenation. Skin oxygenation measurements are useful for burn wound healing assessment and as an indicator of patient complications in the operating room. Due to their unique design, in which all pixels of the image sensor are equipped with different optical filters, SFA cameras require specific image processing steps to obtain meaningful high quality spectral image data. These steps include spatial rearrangement, SFA interpolations and spectral correction. In this paper the feasibility of a commercially available SFA camera for clinical applications is tested. A suitable general image processing pipeline is proposed. As a 'proof of concept' a complete system for spatial dynamic skin oxygenation measurements is developed and evaluated. In a study including 58 volunteers, oxygenation changes during upper arm occlusion were measured with the proposed SFA system and compared with a validated clinical device for localized oxygenation measurements. The comparison of the clinical standard measurements and SFA results show a good correlation for the relative oxygenation changes. This proposed processing pipeline for SFA cameras shows to be effective for relative oxygenation change imaging. It can be implemented in real time and developed further for absolute spatial oxygenation measurements.

Thermographic skin temperature measurement compared with cold sensation in predicting the efficacy and distribution of epidural anesthesia.

Due to the high rates of epidural failure (3-32%), novel techniques are required to objectively assess the successfulness of an epidural block. In this study we therefore investigated whether thermographic temperature measurements have a higher predictive value for a successful epidural block when compared to the cold sensation test as gold standard. Epidural anesthesia was induced in 61 patients undergoing elective abdominal, thoracic or orthopedic surgery. A thermographic picture was recorded at 5, 10 and 15 min following epidural anesthesia induction. After 15 min a cold sensation test was performed. Epidural anesthesia is associated with a decrease in skin temperature. Thermography predicts a successful epidural block with a sensitivity of 54% and a PPV of 92% and a specificity of 67% and a NPV of 17%. The cold sensation test shows a higher sensitivity and PPV than thermography (97 and 93%), but a lower specificity and NPV than thermography (25 and 50%). Thermographic temperature measurements can be used as an additional and objective method for the assessment of the effectiveness of an epidural block next to the cold sensation test, but have a low sensitivity and negative predictive value. The local decrease in temperature as observed in our study during epidural anesthesia is mainly attributed to a core-to-peripheral redistribution of body heat and vasodilation.

Thulium laser-assisted endoscopic third ventriculostomy: Determining safe laser settings using in vitro model and 2 year follow-up results in 106 patients.

BACKGROUND AND OBJECTIVE: Endoscopic third ventriculostomy is used to treat hydrocephalus. Different laser wavelengths have been proposed for laser-assisted endoscopic third ventriculostomies over the last decades. The aim of this study was to evaluate Thulium laser endoscopic third ventriculostomy heat penetration in the surrounding environment of the floor of the third ventricle in an in vitro setting with visualization of thermal distribution. Subsequently 106 Thulium laser endoscopic third ventriculostomy procedures were retrospectively analyzed to demonstrate safety. METHODS: The in vitro visualization was based on the color Schlieren method. The heat penetration was measured beneath a tissue phantom of the floor of the third ventricle with a fiber of 365 µm in diameter at different energy settings; 1.0W (956 J/cm2 ), 2.0W (1,912 J/cm2 ), 4.0W (3,824 J/cm2 ), and 7.0W (6,692 J/cm2 ), with a pulse duration of 1.0 second. All experiments were repeated five times. In addition, 106 Thulium laser endoscopic third ventriculostomy procedures between 2005 and 2015 were retrospectively analysed for etiology, sex, complications, and laser parameters. RESULTS: In the energy settings from 1.0 to 4.0 W, heat penetration depth beneath the phantom of the third ventricle did not exceed 1.5 mm. The heat penetration depth at 7 W, exceeded 6 mm. The clinical overall success rate was 80% at the 2-year follow-up study. Complications occurred in 5% of the procedures. In none of the 106 investigated clinical patients bleeding or damage to the basilar artery was encountered due to Thulium laser ablation. CONCLUSIONS: The in vitro experiments show that under 4.0W the situation is considered safe, due to low penetration of heat, thus the chance of accidentally damaging critical structures like the basilar artery is very small. The clinical results show that the Thulium laser did not cause any bleeding of the basilar artery, and is a safe technique for laser endoscopic third ventriculostomy. Lasers Surg. Med. © 2017 Wiley Periodicals, Inc.

Insights into the use of thermography to assess burn wound healing potential: a reliable and valid technique when compared to laser Doppler imaging.

Adequate assessment of burn wounds is crucial in the management of burn patients. Thermography, as a noninvasive measurement tool, can be utilized to detect the remaining perfusion over large burn wound areas by measuring temperature, thereby reflecting the healing potential (HP) (i.e., number of days that burns require to heal). The objective of this study was to evaluate the clinimetric properties (i.e., reliability and validity) of thermography for measuring burn wound HP. To evaluate reliability, two independent observers performed a thermography measurement of 50 burns. The intraclass correlation coefficient (ICC), the standard error of measurement (SEM), and the limits of agreement (LoA) were calculated. To assess validity, temperature differences between burned and nonburned skin (?T) were compared to the HP found by laser Doppler imaging (serving as the reference standard). By applying a visual method, one ?T cutoff point was identified to differentiate between burns requiring conservative versus surgical treatment. The ICC was 0.99, expressing an excellent correlation between two measurements. The SEM was calculated at 0.22°C, the LoA at ?0.58°C and 0.64°C. The ?T cutoff point was ?0.07°C (sensitivity 80%; specificity 80%). These results show that thermography is a reliable and valid technique in the assessment of burn wound HP.

The Influence of a Metal Stent on the Distribution of Thermal Energy during Irreversible Electroporation.

PURPOSE: Irreversible electroporation (IRE) uses short duration, high-voltage electrical pulses to induce cell death via nanoscale defects resulting from altered transmembrane potential. The technique is gaining interest for ablations in unresectable pancreatic and hepatobiliary cancer. Metal stents are often used for palliative biliary drainage in these patients, but are currently seen as an absolute contraindication for IRE due to the perceived risk of direct heating of the metal and its surroundings. This study investigates the thermal and tissue viability changes due to a metal stent during IRE. METHODS: IRE was performed in a homogeneous tissue model (polyacrylamide gel), without and with a metal stent placed perpendicular and parallel to the electrodes, delivering 90 and 270 pulses (15-35 A, 90 µsec, 1.5 cm active tip exposure, 1.5 cm interelectrode distance, 1000-1500 V/cm, 90 pulses/min), and in-vivo in a porcine liver (4 ablations). Temperature changes were measured with an infrared thermal camera and with fiber-optic probes. Tissue viability after in-vivo IRE was investigated macroscopically using 5-triphenyltetrazolium chloride (TTC) vitality staining. RESULTS: In the gel, direct stent-heating was not observed. Contrarily, the presence of a stent between the electrodes caused a higher increase in median temperature near the electrodes (23.2 vs 13.3°C [90 pulses]; p = 0.021, and 33.1 vs 24.8°C [270 pulses]; p = 0.242). In-vivo, no temperature difference was observed for ablations with and without a stent. Tissue examination showed white coagulation 1mm around the electrodes only. A rim of vital tissue remained around the stent, whereas ablation without stent resulted in complete tissue avitality. CONCLUSION: IRE in the vicinity of a metal stent does not cause notable direct heating of the metal, but results in higher temperatures around the electrodes and remnant viable tissue. Future studies should determine for which clinical indications IRE in the presence of metal stents is safe and effective.

Thermal Energy during Irreversible Electroporation and the Influence of Different Ablation Parameters.

PURPOSE: Irreversible electroporation (IRE) uses high-voltage electric fields to achieve cell death. Although the mechanism of IRE is mainly designated as nonthermal, development of secondary Joule heating is inevitable. The study purpose was to gain understanding of temperature development and distribution during IRE. MATERIALS AND METHODS: IRE was performed in a transparent polyacrylamide gel resembling soft tissue. Mechanical effects, changes in temperature gradient, and absolute temperature changes were measured with three different optical techniques (high-speed, color Schlieren, and infrared imaging) to investigate the effect on temperature of variations in voltage, pulse length, active tip length (ATL), interelectrode distance, electrode configuration (parallel, convergent, and divergent), and sequential pulsing (pulse delivery interrupted by breaks). The total delivered energy was calculated. RESULTS: A temperature gradient, starting at the tips of both electrodes and expanding toward each other, developed immediately with pulse delivery. Temperatures increased with increasing voltage (by 2.5°C-40.4°C), pulse length (by 5.3°C-9.8°C), ATL (by 5.9°C-17.6°C), and interelectrode distance (by 7.6°C-21.5°C), in accordance with higher energy delivery. Nonparallel electrode placement resulted in heterogeneous temperature distribution with the peak temperature focused in the area with the shortest interelectrode distance. Sequential pulse delivery significantly reduced the temperature increase compared with continuous pulsing (4.3°C vs 11.7°C). CONCLUSIONS: Voltage, pulse length, interelectrode distance, ATL, and electrode configuration each have a strong effect on temperature development and distribution during IRE. Sequential pulsing reduces the extent and volume of thermal distribution and may prove beneficial with respect to procedural safety.

Irreversible electroporation of the porcine kidney: Temperature development and distribution.

OBJECTIVE: Although tissue ablation by irreversible electroporation (IRE) has been characterized as nonthermal, the application of frequent repetitive high-intensity electric pulses has the potential of substantially heating the targeted tissue and causing thermal damage. This study evaluates the risk of possible thermal damage by measuring temperature development and distribution during IRE of porcine kidney tissue. METHODS: The animal procedures were conducted following an approved Institutional Animal Ethics Committee protocol. IRE ablation was performed in 8 porcine kidneys. Of them, 4 kidneys were treated with a 3-needle configuration and the remaining 4 with a 4-needle configuration. All IRE ablations consisted of 70 pulses with a length 90 µs. The pulse frequency was set at 90 pulses/min, and the pulse intensity at 1,500 V/cm with a spacing of 15 mm between the needles. The temperature was measured internally using 4 fiber-optic temperature probes and at the surface using a thermal camera. RESULTS: For the 3-needle configuration, a peak temperature of 57°C (mean = 49 ± 10°C, n = 3) was measured in the core of the ablation zone and 40°C (mean = 36 ± 3°C, n = 3) at 1cm outside of the ablation zone, from a baseline temperature of 33 ± 1°C. For the 4-needle configuration, a peak temperature of 79°C (mean = 62 ± 16°C, n = 3) was measured in the core of the ablation zone and 42°C (mean = 39 ± 3°C, n = 3) at 1cm outside of the ablation zone, from a baseline of 35 ± 1°C. The thermal camera recorded the peak surface temperatures in the center of the ablation zone, reaching 31°C and 35°C for the 3- and 4-needle configuration IRE (baseline 22°C). CONCLUSIONS: The application of repetitive high-intensity electric pulses during IRE ablation in porcine kidney causes a lethal rise in temperature within the ablation zone. Temperature monitoring should be considered when performing IRE ablation near vital structures.

Are Epilepsy-Related fMRI Components Dependent on the Presence of Interictal Epileptic Discharges in Scalp EEG?

Spatial independent component analysis (ICA) is increasingly being used to extract resting-state networks from fMRI data. Previous studies showed that ICA also reveals independent components (ICs) related to the seizure onset zone. However, it is currently unknown how these epileptic ICs depend on the presence of interictal epileptic discharges (IEDs) in the EEG. The goal of this study was to explore the relation between ICs obtained from fMRI epochs during the occurrence of IEDs in the EEG and those without IEDs. fMRI data sets with co-registered EEG were retrospectively selected of patients from whom the location of the epileptogenic zone was confirmed by outcome of surgery (n = 8). The fMRI data were split into two epochs: one with IEDs visible in scalp EEG and one without. Spatial ICA was applied to the fMRI data of each part separately. The maps of all resulting components were compared to the resection area and the EEG-fMRI correlation pattern by computing a spatial correlation coefficient to detect the epilepsy-related component. For all patients, except one, there was a remarkable resemblance between the epilepsy-related components selected during epochs with IEDs and those without IEDs. These findings suggest that epilepsy-related ICs are not dependent on the presence of IEDs in scalp EEG. Since these epileptic ICs showed partial overlap with resting-state networks of healthy volunteers (n = 10), our study supports the need for new ways to classify epileptic ICs.

Comparing mechanical effects and sound production of KTP, thulium, and CO2 laser in stapedotomy.

HYPOTHESIS: The mechanical and acoustic effects that occur during laser-assisted stapedotomy differ among KTP, CO2, and thulium lasers. BACKGROUND: Making a fenestration in stapedotomy with a laser minimizes the risk of a floating footplate caused by mechanical forces. Theoretically, the lasers used in stapedotomy could inflict mechanical trauma because of absorption in the perilymph, causing vaporization bubbles. These bubbles can generate a shock wave, when imploding. METHODS: In an inner ear model, we made a fenestration in a fresh human stapes with KTP, CO2, and thulium laser. During the fenestration, we performed high-speed imaging from different angles to capture mechanical effects. The sounds produced by the fenestration were recorded simultaneously with a hydrophone; these recordings were compared with acoustics produced by a conventional microburr fenestration. RESULTS: KTP laser fenestration showed little mechanical effects, with minimal sound production. With CO2 laser, miniscule bubbles arose in the vestibule; imploding of these bubbles corresponded to the acoustics. Thulium laser fenestration showed large bubbles in the vestibule, with a larger sound production than the other two lasers. Each type of laser generated significantly less noise than the microburr. The microburr maximally reached 95 ± 7 dB(A), compared with 49 ± 8 dB(A) for KTP, 68 ± 4 dB(A) for CO2, and 83 ± 6 dB(A) for thulium. CONCLUSION: Mechanical and acoustic effects differ among lasers used for stapedotomy. Based on their relatively small effects, KTP and CO2 lasers are preferable to thulium laser.