ABSTRACT
Soft amorphous materials are viscoelastic solids ubiquitously found around us, from clays and cementitious pastes to emulsions and physical gels encountered in food or biomedical engineering. Under an external deformation, these materials undergo a noteworthy transition from a solid to a liquid state that reshapes the material microstructure. This yielding transition was the main theme of a workshop held from January 9 to 13, 2023 at the Lorentz Center in Leiden. The manuscript presented here offers a critical perspective on the subject, synthesizing insights from the various brainstorming sessions and informal discussions that unfolded during this week of vibrant exchange of ideas. The result of these exchanges takes the form of a series of open questions that represent outstanding experimental, numerical, and theoretical challenges to be tackled in the near future.
ABSTRACT
Traditionally, stress fluctuations in flowing and deformed materials are overlooked, with an obvious focus on average stresses in a continuum mechanical approximation. However, these fluctuations, often dismissed as "noise," hold the potential to provide direct insights into the material structure and its structure-stress coupling, uncovering detailed aspects of fluid transport and relaxation behaviors. Despite advancements in experimental techniques allowing for the visualization of these fluctuations, their significance remains largely untapped as modeling efforts continue to target Newtonian fluids within the confines of Gaussian noise assumptions. In the present work, a comparative analysis of stress fluctuations in two distinct microstructural models is carried out: the temporary network model and the hydrodynamic dumbbell model. Despite both models conforming to the upper convected Maxwell model at a macroscopic level, the temporary network model predicts non-Gaussian fluctuations. We find that stress fluctuations within the temporary network model exhibit more pronounced abruptness at the local scale, with only an enlargement of the control volume leading to a gradual Gaussian-like noise, diminishing the differences between the two models. These findings underscore the heightened sensitivity of fluctuating rheology to microstructural details and the microstructure-flow coupling, beyond what is captured by macroscopically averaged stresses.
ABSTRACT
In this combined experimental and simulation study, we utilize bond-order topology to quantitatively match particle volume fraction in mechanically uniformly compressed colloidal suspensions with temperature in atomistic simulations. The obtained mapping temperature is above the dynamical glass transition temperature, indicating that the colloidal systems examined are structurally most like simulated undercooled liquids. Furthermore, the structural mapping procedure offers a unifying framework for quantifying relaxation in arrested colloidal systems.
ABSTRACT
Raman spectroscopy enables the non-destructive characterization of chemical composition, crystallinity, defects, or strain in countless materials. However, the Raman response of surfaces or thin films is often weak and obscured by dominant bulk signals. Here we overcome this limitation by placing a transferable porous gold membrane, (PAuM) on the surface of interest. Slot-shaped nanopores in the membrane act as plasmonic antennas and enhance the Raman response of the surface or thin film underneath. Simultaneously, the PAuM suppresses the penetration of the excitation laser into the bulk, efficiently blocking its Raman signal. Using graphene as a model surface, we show that this method increases the surface-to-bulk Raman signal ratio by three orders of magnitude. We find that 90% of the Raman enhancement occurs within the top 2.5 nm of the material, demonstrating truly surface-sensitive Raman scattering. To validate our approach, we quantify the strain in a 12.5 nm thin Silicon film and analyze the surface of a LaNiO3 thin film. We observe a Raman mode splitting for the LaNiO3 surface-layer, which is spectroscopic evidence that the surface structure differs from the bulk. These results validate that PAuM gives direct access to Raman signatures of thin films and surfaces.
ABSTRACT
Pancreatic ß-cells regulate glucose homeostasis through glucose-stimulated insulin secretion, which is hindered in type-2 diabetes. Transport of the insulin vesicles is expected to be affected by changes in the viscoelastic and transport properties of the cytoplasm. These are evaluated in situ through particle-tracking measurements using a rat insulinoma ß-cell line. The use of inert probes assists in decoupling the material properties of the cytoplasm from the active transport through cellular processes. The effect of glucose-stimulated insulin secretion is examined, and the subsequent remodeling of the cytoskeleton, at constant effects of cell activity, is shown to result in reduced mobility of the tracer particles. Induction of diabetic-like conditions is identified to alter the mean-squared displacement of the passive particles in the cytoplasm and diminish its reaction to glucose stimulation.
Subject(s)
Insulin-Secreting Cells , Insulin , Insulin-Secreting Cells/metabolism , Animals , Rats , Insulin/metabolism , Glucose/metabolism , Rheology , Insulin Secretion , Cell Line, Tumor , Diabetes Mellitus, Type 2/metabolismABSTRACT
Stimuli-responsive emulsions offer a dual advantage, combining long-term storage with controlled release triggered by external cues such as pH or temperature changes. This study establishes that thermo-responsive emulsion behaviour is primarily determined by interactions between, rather than within, interfaces. Consequently, the stability of these emulsions is intricately tied to the nature of the stabilizing microgel particles - whether they are more polymeric or colloidal, and the morphology they assume at the liquid interface. The colloidal properties of the microgels provide the foundation for the long-term stability of Pickering emulsions. However, limited deformability can lead to non-responsive emulsions. Conversely, the polymeric properties of the microgels enable them to spread and flatten at the liquid interface, enabling stimuli-responsive behaviour. Furthermore, microgels shared between two emulsion droplets in flocculated emulsions facilitate stimuli-responsiveness, regardless of their internal architecture. This underscores the pivotal role of microgel morphology and the forces they exert on liquid interfaces in the control and design of stimuli-responsive emulsions and interfaces.
ABSTRACT
HYPOTHESIS: Particle-laden interfaces play a crucial role in engineering stability of multiphase systems. However, a full understanding of the mechanical properties in shear and compression, especially in relation to the underlying microstructural changes, is as yet lacking. In this study, we investigate the interfacial rheological moduli in heterogeneous networks of aggregated 2D suspensions using different deformation modes and relate these moduli to changes in the microstructure. EXPERIMENTS: Interfacial rheological experiments were conducted at different surface coverages and clean kinematic conditions, namely in (i) simple shear flow in a modified double wall-ring geometry and (ii) isotropic compression in a custom-built radial trough, while monitoring the evolution of the microstructure. FINDINGS: The compressive moduli increase non-monotonically with decreasing void fraction, reflecting the combined effect of aggregate densification and reduction of void structures, with rotation of rigid clusters playing a significant role in closing voids. However, the shear moduli increase monotonically, which correlates with the increase in fractal dimension of the aggregates making up the backbone network. We also observe that these interfaces act as 2D auxetic materials at intermediate coverages, which is surprising given their amorphous structure. This finding has potential implications for the resilience of particle-coated bubbles or droplets subjected to time-varying compression-expansion deformations.
ABSTRACT
Colloidal gels, commonly used as mesoporous intermediates or functional materials, suffer from brittleness, often showing small yield strains on the order of 1% or less for gelled colloidal suspensions. The short-range adhesive forces in most such gels are central forces-combined with the smooth morphology of particles, the resistance to yielding and shear-induced restructuring is limited. In this study, we propose an innovative approach to improve colloidal gels by introducing surface roughness to the particles to change the yield strain, giving rise to non-central interactions. To elucidate the effects of particle roughness on gel properties, we prepared thermoreversible gels made from rough or smooth silica particles using a reliable click-like-chemistry-based surface grafting technique. Rheological and optical characterization revealed that rough particle gels exhibit enhanced toughness and self-healing properties. These remarkable properties can be utilized in various applications, such as xerogel fabrication and high-fidelity extrusion 3D-printing, as we demonstrate in this study.
ABSTRACT
When monoclonal antibodies are exposed to an air-water interface, they form aggregates, which negatively impacts their performance. Until now, the detection and characterization of interfacial aggregation have been difficult. Here, we exploit the mechanical response imparted by interfacial adsorption by measuring the interfacial shear rheology of a model antibody, anti-streptavidin immunoglobulin-1 (AS-IgG1), at the air-water interface. Strong viscoelastic layers of AS-IgG1 form when the protein is adsorbed from the bulk solution. Creep experiments correlate the compliance of the interfacial protein layer with the subphase solution pH and bulk concentration. These, along with oscillatory strain amplitude and frequency sweeps, show that the viscoelastic behavior of the adsorbed layers is that of a soft glass with interfacial shear moduli on the order of 10-3 Pa m. Shifting the creep compliance curves under different applied stresses forms master curves consistent with stress-time superposition of soft interfacial glasses. The interfacial rheology results are discussed in the context of the interface-mediated aggregation of AS-IgG1.
ABSTRACT
HYPOTHESIS: The mechanical properties of model air/water interfaces covered by poly(N-isopropylacrylamide) microgels depend on the microgels deformability or in other words on the amount of cross-linker added during synthesis. EXPERIMENTS: The study is carried out by measuring the apparent dilational, the compression and the shear moduli using three complementary methods: (1) the pendant drop method with perturbative areas, (2) the Langmuir trough compression, and (3) shear rheology using a double wall ring cell mounted onto a Langmuir through. FINDINGS: In the range of surface coverages studied, the interfaces exhibit a solid-like behavior and elasticity goes through a maximum as a function of the surface pressure. This is observable whatever the investigation method. This maximum elasticity depends on the microgel deformability: the softer the microgels the higher the value of the moduli. The mechanical behavior of model interfaces is discussed, taking into account the core-shell structure of the particles and their packing at the interface.
ABSTRACT
Guanidine-based surfactant ethyl lauroyl arginate (LAE) and cellulose nanocrystals (CNCs) form complexes of enhanced surface activity when compared to pure surfactants. The LAE-CNC mixtures show enhanced foaming properties. The dynamic thin-film balance technique (DTFB) was used to study the morphology, drainage and rupture of LAE-CNC thin liquid films under constant driving pressure. A total of three concentrations of surfactant and the corresponding mixtures of LAE with sulfated (sCNC) and carboxylated (cCNC) cellulose nanocrystals were studied. The sCNC and cCNC suspension with LAE formed thin films, with stability increasing with surfactant concentration and with complex rheological properties. In the presence of LAE, the aggregation of CNC was observed. While the sCNC aggregates were preferentially present in the film volume with a small fraction at the surface, the cCNC aggregates, due to their higher hydrophobicity, were preferentially located at film interfaces, forming compact layers. The presence of both types of aggregates decreased the stability of the thin liquid film compared to the one for the LAE solution with the same concentration. The addition of CNC to LAE was critical for foam formation, and foam stability was in qualitative agreement with the thin films' lifetimes. The foam volume increased with the LAE concentration. However, there was an optimum surfactant concentration to achieve stable foam. In particular, the very resistant foam was obtained with cCNC suspensions that formed the interfaces with a complex structure and rheology. On the other hand, at high LAE concentrations, the aggregates of CNC may exhibit antifoaming properties.
ABSTRACT
Bacterial biofilms are communities living in a matrix consisting of self-produced, hydrated extracellular polymeric substances. Most microorganisms adopt the biofilm lifestyle since it protects by conferring resistance to antibiotics and physico-chemical stress factors. Consequently, mechanical removal is often necessary but rendered difficult by the biofilm's complex, viscoelastic response, and adhesive properties. Overall, the mechanical behaviour of biofilms also plays a role in the spreading, dispersal and subsequent colonization of new surfaces. Therefore, the characterization of the mechanical properties of biofilms plays a crucial role in controlling and combating biofilms in industrial and medical environments. We performed in situ shear rheological measurements of Bacillus subtilis biofilms grown between the plates of a rotational rheometer under well-controlled conditions relevant to many biofilm habitats. We investigated how the mechanical history preceding rheological measurements influenced biofilm mechanics and compared these results to the techniques commonly used in the literature. We also compare our results to measurements using interfacial rheology on bacterial pellicles formed at the air-water interface. This work aims to help understand how different growth and measurement conditions contribute to the large variability of mechanical properties reported in the literature and provide a new tool for the rigorous characterization of matrix components and biofilms.
ABSTRACT
Understanding the interfacial structure-property relationship of complex fluid-fluid interfaces is increasingly important for guiding the formulation of systems with targeted interfacial properties, such as those found in multiphase complex fluids, biological systems, biopharmaceuticals formulations, and many consumer products. Mixed interfacial flow fields, typical of classical Langmuir trough experiments, introduce a complex interfacial flow history that complicates the study of interfacial properties of complex fluid interfaces. In this article, we describe the design, implementation, and validation of a new instrument capable of independent application of controlled interfacial dilation and shear kinematics on fluid interfaces. Combining the Quadrotrough with both in situ Brewster angle microscopy and neutron reflectometry provides detailed structural measurements of the interface at the mesoscale and nanoscale in relationship to interfacial material properties under controlled interfacial deformation histories.
Subject(s)
Biological Products , Dilatation , Surface PropertiesABSTRACT
Foams can resist destabilizaton in ways that appear similar on a macroscopic scale, but the microscopic origins of the stability and the loss thereof can be quite diverse. Here, we compare both the macroscopic drainage and ultimate collapse of aqueous foams stabilized by either a partially hydrolyzed poly(vinyl alcohol) (PVA) or a nonionic low-molecular-weight surfactant (BrijO10) with the dynamics of individual thin films at the microscale. From this comparison, we gain significant insight regarding the effect of both surface stresses and intermolecular forces on macroscopic foam stability. Distinct regimes in the lifetime of the foams were observed. Drainage at early stages is controlled by the different stress-boundary conditions at the surfaces of the bubbles between the polymer and the surfactant. The stress-carrying capacity of PVA-stabilized interfaces is a result of the mutual contribution of Marangoni stresses and surface shear viscosity. In contrast, surface shear inviscidity and much weaker Marangoni stresses were observed for the nonionic surfactant surfaces, resulting in faster drainage times, both at the level of the single film and the macroscopic foam. At longer times, the PVA foams present a regime of homogeneous coalescence where isolated coalescence events are observed. This regime, which is observed only for PVA foams, occurs when the capillary pressure reaches the maximum disjoining pressure. A final regime is then observed for both systems where a fast coalescence front propagates from the top to the bottom of the foams. The critical liquid fractions and capillary pressures at which this regime is obtained are similar for both PVA and BrijO10 foams, which most likely indicates that collapse is related to a universal mechanism that seems unrelated to the stabilizer interfacial dynamics.
ABSTRACT
The formation of domains in multicomponent lipid mixtures has been suggested to play a role in moderating signal transduction in cells. Understanding how domain size may be regulated by both hybrid lipid molecules and impurities is important for understanding real biological processes; at the same time, developing model systems where domain size can be regulated is crucial to enable systematic studies of domain formation kinetics and thermodynamics. Here, we perform a model study of the effects of oil molecules, which swell the bilayer, and line-active hybrid phospholipids using a thermally induced liquid-solid phase separation in planar, free-standing lipid bilayers consisting of DOPC and DPPC (1,2-dioleoyl-sn-glycero-3-phosphocholine and 1,2-dipalmitoyl-sn-glycero-3-phosphocholine, respectively). The experiments show that the kinetics of domain growth are significantly affected by the type and molecular structure of the oil (squalene, hexadecane, or decane), with the main contributing factors being the degree of swelling of the bilayer and the changes in line tension induced by the different oils, with smaller domains resulting from systems with smaller values of the line tension. POPC (1-palmitoyl-sn-2-oleoyl-glycero-3-phosphocholine), on the other hand, acts as a line-active hybrid lipid, reducing the domain size when added in small amounts and slowing down domain coarsening. Finally, we show that despite the regulation of domain size by both methods, the phase transition temperature is influenced by the presence of oil molecules but not significantly by the presence of hybrid lipids. Overall, our results show how to regulate domain size in binary membrane model systems, over a wide range of length scales, by incorporating oil molecules and hybrid lipids.
Subject(s)
Lipid Bilayers , Phospholipids , Lipid Bilayers/chemistry , Oils , Phase Transition , Phosphatidylcholines/chemistry , Phospholipids/chemistry , ThermodynamicsABSTRACT
Biofilms, bacterial communities of cells encased by a self-produced matrix, exhibit a variety of three-dimensional structures. Specifically, channel networks formed within the bulk of the biofilm have been identified to play an important role in the colonies' viability by promoting the transport of nutrients and chemicals. Here, we study channel formation and focus on the role of the adhesion of the biofilm matrix to the substrate in Pseudomonas aeruginosa biofilms grown under constant flow in microfluidic channels. We perform phase contrast and confocal laser scanning microscopy to examine the development of the biofilm structure as a function of the substrates' surface energy. The formation of the wrinkles and folds is triggered by a mechanical buckling instability, controlled by biofilm growth rate and the film's adhesion to the substrate. The three-dimensional folding gives rise to hollow channels that rapidly increase the effective volume occupied by the biofilm and facilitate bacterial movement inside them. The experiments and analysis on mechanical instabilities for the relevant case of a bacterial biofilm grown during flow enable us to predict and control the biofilm morphology.
Subject(s)
Biofilms , Pseudomonas aeruginosa , Microscopy, ConfocalABSTRACT
In multiphase materials, structured fluid-fluid interfaces can provide mechanical resistance against destabilization. Coarsening, coalescence, and significant deformation can be stalled with appropriate interfacial rheology and thus preserve interface integrity. Often, interfacial "strength" is generated by dense, packed surface populations, which are challenging to achieve through gradual, equilibrium-limited adsorption. Recent efforts have focused on developing new methods to produce kinetically trapped interfacial structures that possess desirable viscoelasticity or viscoplasticity, sometimes even with sparse populations. In creating these interfaces, we should recognize that the processing history is deterministic and offers alternative handles to engineer useful rheology. In this Perspective, we consider what can be achieved by designing not only the intrinsic qualities of surface-active species but also the process that brings them to the interface. We contrast different classes of processing history through a somewhat historical lens: after creating an interface ("divide"), what ("conquering") strategies exist for populating it with agents that ensure stabilization? Navigating the delicate interplay among property, structure, and processing history is required to improve material and energy use and to realize unique multiphase materials.
ABSTRACT
Polymer hydrogels, water-laden 3D cross-linked networks, find broad application as advanced biomaterials and functional materials because of their biocompatibility, stimuli responsiveness, and affordability. The cross-linking density reports material properties such as elasticity, permeability, and swelling propensity. However, this critical design parameter can be challenging to template locally. Here, we report a continuous processing scheme that uses laminar flow to direct the organization of cross-linking density across a single sample. Dilute and concentrated poly(ethylene glycol) diacrylate solutions are fed into custom serpentine millifluidic devices. These feature a modular sequence of splitting, rotation, and recombination elements, which create patterned streamlines that serve as a template for hierarchical concentration distributions. Poly(acrylic acid) microgels impart viscoplasticity, which stabilizes layered flow during multiplication and ensures reliable advection. The devices produce structured, seamless filaments, which are then arranged into objects using 3D printing, and photopolymerized to secure the heterogeneous distribution. The flow-encoded, multiscale architecture provides mechanical contrast, which is demonstratively exploited to program robust and reversible shape transformations, potentially useful in soft actuator and sensor applications. The unique structures achieved, and the geometrically dictated, chemistry-agnostic operating principles used to achieve them, provides a new means to engineer hydrogels to suit a variety of applications.
ABSTRACT
Some contagious diseases, such as COVID-19, spread through the transmission of aerosols and droplets. Aerosol and droplet formation occurs inside and outside of the respiratory tract, the latter being observed during speaking and sneezing. Upon sneezing, saliva is expelled as a flat sheet, which destabilizes into filaments that subsequently break up into droplets. The presence of macromolecules (such as mucins) in saliva influences the dynamics of aerosol generation, since elasticity is expected to stabilize both fluid sheets and filaments, hence deterring droplet formation. In this study, the process of aerosol formation outside the respiratory tract is systematically replicated using an impinging jet setup, where two liquid jets collide and form a thin fluid sheet that can fragment into ligaments and droplets. The experimental setup enables us to investigate a range of dynamic conditions, quantified by the relevant non-dimensional numbers, which encompass those experienced during sneezing. Experiments are conducted with human saliva provided by different donors, revealing significant variations in their stability and breakup. We quantify the effect of viscoelasticity via shear and extensional rheology experiments, concluding that the extensional relaxation time is the most adequate measure of a saliva's elasticity. We summarize our results in terms of the dimensionless Weber, Reynolds, and Deborah numbers and construct universal state diagrams that directly compare our data to human sneezing, concluding that the aerosolization propensity is correlated with diminished saliva elasticities, higher emission velocities, and larger ejecta volumes. This could entail variations in disease transmission between individuals which hitherto have not been recognized.
Subject(s)
COVID-19 , Saliva , Humans , SARS-CoV-2 , Sneezing , ViscosityABSTRACT
The drainage and rupture of polymer solutions was investigated using a dynamic thin film balance. The polymeric nature of the dissolved molecules leads to significant resistance to the deformation of the thin liquid films. The influence of concentration, molecular weight, and molecular weight distribution of the dissolved polymer on the lifetime of the films was systematically examined for varying hydrodynamic conditions. Depending on the value of the capillary number and the degree of confinement, different stabilisation mechanisms were observed. For low capillary numbers, the lifetime of the films was the highest for the highly concentrated, narrowly-distributed, low molecular weight polymers. In contrast, at high capillary numbers, the flow-induced concentration differences in the film resulted in lateral osmotic stresses, which caused a dynamic stabilisation of the films and the dependency on molecular weight distribution in particular becomes important. Phenomena such as cyclic dimple formation, vortices, and dimple recoil were observed, the occurrence of which depended on the relative magnitude of the lateral osmotic and the hydrodynamic stresses. The factors which lead to enhanced lifetime of the films as a consequence of these flow instabilities can be used to either stabilise foams or, conversely, prevent foam formation.