ABSTRACT
Polyetheretherketone (PEEK) has stood out as the leading high-performance thermoplastic for the replacement of metals in orthopaedic, trauma and spinal implant applications due to its high biocompatibility and mechanical properties. Despite its potential for custom-made medical devices, 3D-printed PEEK's mechanical performance depends on processing parameters and its bioinertness may hinder bone opposition to the implant. Concerning these challenges, this review focuses on the available literature addressing the improvement of the mechanical performance of PEEK processed through "fused filament fabrication" (FFF) along with literature on bioactivation of PEEK for improved osseointegration. The reviewed research suggests that improvements can be achieved in mechanical performance of 3D-printed PEEK with adequate FFF parametrization while different bioactivation techniques can be used to improve the bioperformance of 3D-printed PEEK. The adequate approaches towards these procedures can increase PEEK's potential for the manufacture of high-performance custom-made implantable devices that display improved bone-implant integration and prevent stress shielding of the treated bone.
ABSTRACT
Sensing Technology (ST) plays a key role in Structural Health-Monitoring (SHM) systems. ST focuses on developing sensors, sensory systems, or smart materials that monitor a wide variety of materials' properties aiming to create smart structures and smart materials, using Embedded Sensors (ESs), and enabling continuous and permanent measurements of their structural integrity. The integration of ESs is limited to the processing technology used to embed the sensor due to its high-temperature sensitivity and the possibility of damage during its insertion into the structure. In addition, the technological process selection is dependent on the base material's composition, which comprises either metallic or composite parts. The selection of smart sensors or the technology underlying them is fundamental to the monitoring mode. This paper presents a critical review of the fundaments and applications of sensing technologies for SHM systems employing ESs, focusing on their actual developments and innovation, as well as analysing the challenges that these technologies present, in order to build a path that allows for a connected world through distributed measurement systems.
Subject(s)
Computer Communication Networks , Smart Materials , Monitoring, PhysiologicABSTRACT
Biodegradable magnesium (Mg)-based metal matrix composites are promising candidates for orthopaedic applications since magnesium is an abundant mineral in the human body. To improve the bioactivity and cytocompatibility of these Mg composites, hydroxyapatite nanoparticles (HAP) and fluorapatite (FA) microparticles synthesised by a citrate-derived hydrothermal method were introduced into a Mg matrix. These innovative Mg/HAP/FA composites were produced by multi-pass upward friction stir processing (UFSP). Microstructural observation and Micro-CT reconstruction of the composite revealed that HAP and FA particles are well dispersed in the Mg matrix and the magnesium grain size was significantly reduced after the UFSP process. The in vitro bioactivity behaviour of UFSP processed Mg/HAP/FA composites was investigated in simulated body fluid. The results revealed the formation of a fluoride-rich apatite layer on the composites, which was attributed to the release of fluoride ions from the composite and their precipitation in a different configuration. Moreover, cytocompatibility results revealed that the presence of FA particles, together with HAP nanoparticles, were able to favour osteoblasts-biomaterial interaction.
