ABSTRACT
PURPOSE: To assess whether the intention to intraoperatively reposition pedicle screws differs when spine surgeons evaluate the same screws with 2D imaging or 3D imaging. METHODS: In this online survey study, 21 spine surgeons evaluated eight pedicle screws from patients who had undergone posterior spinal fixation. In a simulated intraoperative setting, surgeons had to decide if they would reposition a marked pedicle screw based on its position in the provided radiologic imaging. The eight assessed pedicle screws varied in radiologic position, including two screws positioned within the pedicle, two breaching the pedicle cortex < 2 mm, two breaching the pedicle cortex 2-4 mm, and two positioned completely outside the pedicle. Surgeons assessed each pedicle screw twice without knowing and in random order: once with a scrollable three-dimensional (3D) image and once with two oblique fluoroscopic two-dimensional (2D) images. RESULTS: Almost all surgeons (19/21) intended to reposition more pedicle screws based on 3D imaging than on 2D imaging, with a mean number of pedicle screws to be repositioned of, respectively, 4.1 (± 1.3) and 2.0 (± 1.3; p < 0.001). Surgeons intended to reposition two screws placed completely outside the pedicle, one breaching 2-4mm, and one breaching < 2 mm more often based on 3D imaging. CONCLUSION: When provided with 3D imaging, spine surgeons not only intend to intraoperatively reposition pedicle screws at risk of causing postoperative complications more often but also screws with acceptable positions. This study highlights the potential of intraoperative 3D imaging as well as the need for consensus on how to act on intraoperative 3D information.
Subject(s)
Pedicle Screws , Humans , Spinal Fusion/methods , Spine/surgery , Spine/diagnostic imaging , Clinical Decision-Making/methods , Imaging, Three-Dimensional/methods , Surveys and Questionnaires , SurgeonsABSTRACT
OBJECTIVE: High tibial osteotomy (HTO) and knee joint distraction (KJD) are treatments to unload the osteoarthritic (OA) joint with proven success in postponing a total knee arthroplasty (TKA). While both treatments demonstrate joint repair, there is limited information about the quality of the regenerated tissue. Therefore, the change in quality of the repaired cartilaginous tissue after KJD and HTO was studied using delayed gadolinium-enhanced magnetic resonance imaging of cartilage (dGEMRIC). DESIGN: Forty patients (20 KJD and 20 HTO), treated for medial tibiofemoral OA, were included in this study. Radiographic outcomes, clinical characteristics, and cartilage quality were evaluated at baseline, and at 1- and 2-year follow-up. RESULTS: Two years after KJD treatment, clear clinical improvement was observed. Moreover, a statistically significant increased medial (Δ 0.99 mm), minimal (Δ 1.04 mm), and mean (Δ 0.68 mm) radiographic joint space width (JSW) was demonstrated. Likewise, medial (Δ 1.03 mm), minimal (Δ 0.72 mm), and mean (Δ 0.46 mm) JSW were statistically significantly increased on radiographs after HTO. There was on average no statistically significant change in dGEMRIC indices over two years and no difference between treatments. Yet there seemed to be a clinically relevant, positive relation between increase in cartilage quality and patients' experienced clinical benefit. CONCLUSIONS: Treatment of knee OA by either HTO or KJD leads to clinical benefit, and an increase in cartilage thickness on weightbearing radiographs for over 2 years posttreatment. This cartilaginous tissue was on average not different from baseline, as determined by dGEMRIC, whereas changes in quality at the individual level correlated with clinical benefit.
Subject(s)
Knee Joint/surgery , Osteoarthritis, Knee/surgery , Osteogenesis, Distraction/methods , Osteotomy/methods , Tibia/surgery , Female , Gadolinium , Humans , Knee Joint/diagnostic imaging , Magnetic Resonance Imaging/methods , Male , Middle Aged , Minimal Clinically Important Difference , Osteoarthritis, Knee/diagnostic imaging , Tibia/diagnostic imagingABSTRACT
PURPOSE: To define the longitudinal rotation axis around which individual vertebrae rotate, and to establish the various extra- and intravertebral rotation patterns in thoracic adolescent idiopathic scoliosis (AIS) patients, for better understanding of the 3D development of the rotational deformity. METHODS: Seventy high-resolution CT scans from an existing database of thoracic AIS patients (Cobb angle: 46°-109°) were included to determine the vertebral axial rotation, rotation radius, intravertebral axial rotation, and local mechanical torsion for each spinal level, using previously validated image processing techniques. RESULTS: For all levels, the longitudinal rotation axis, from which the vertebrae rotate away from the midline, was localized posterior to the spine. The axis became closer to the spine at the apex: apex, r = 11.5 ± 5.1 cm versus two levels above (radius = 15.8 ± 8.5 cm; p < 0.001) and beneath (radius = 14.2 ± 8.2 cm; p < 0.001). The vertebral axial rotation, intravertebral axial rotation, and local mechanical torsion of the vertebral bodies were largest at the apex (21.9° ± 7.4°, 8.7° ± 13.5° and 3.0° ± 2.5°) and decreased toward the neutral, junctional zones (p < 0.001). CONCLUSION: In AIS, the vertebrae rotate away around an axis that is localized posterior to the spine. The distance between this axis and the spine is minimal at the apex and increases gradually to the neutral zones. The vertebral axial rotation is accompanied by smaller amounts of intravertebral rotation and local mechanical torsion, which increases toward the apical region. The altered morphology and alignment are important for a better understanding of the 3D pathoanatomical development of AIS and better therapeutic planning for bracing and surgical intervention. These slides can be retrieved under Electronic Supplementary Material.
Subject(s)
Scoliosis/diagnostic imaging , Thoracic Vertebrae/diagnostic imaging , Tomography, X-Ray Computed/methods , Humans , Image Processing, Computer-Assisted , RotationABSTRACT
BACKGROUND CONTEXT: One of the characteristics of reported observations in adolescent idiopathic scoliosis (AIS) is that the thoracic spine is longer anteriorly than posteriorly, more pronounced around the apex than the transitional zones. This reversal of the normal kyphotic anatomy of the thoracic spine is related to questions of etiopathogenesis of AIS. The changes in the anatomy of the anterior column have been described rather in detail; however, the role of the posterior spinal column and the laminae has so far not been elucidated. If the posterior column exhibits a longitudinal growth disturbance, it could act as a tether, leading to a more or less normal anterior column with a deformed and shorter posterior aspect of the spine. So far, it has remained unclear whether this anterior-posterior length discrepancy is the result of relative anterior lengthening or relative posterior shortening, and which tissues (bone, disc, intervertebral soft tissue) are involved. PURPOSE: The present study aimed to compare the discrepancy of the anterior-posterior length of the spinal column in the "true" midsagittal plane of each vertebra in patients with idiopathic scoliosis versus controls, using three-dimensional computed tomography (CT) scans. STUDY DESIGN/SETTING: This is a cross-sectional study. PATIENT SAMPLE: The sample consisted of computed tomography scans of 80 patients with moderate to severe AIS (Cobb angle: 46°-109°) before scoliosis navigation surgery and 30 non-scoliotic age-matched controls. OUTCOME MEASURES: The height of the osseous and non-osseous structures from anterior to posterior in the "true" midsagittal plane has been determined: the anterior side of the vertebral body and disc, the posterior side of the vertebral body and disc, the lamina and interlaminar space and the spinous process and interspinous space, as well as the height ratios between the anterior column and posterior structures of the primary thoracic and lumbar AIS curves and corresponding levels in non-scoliotic controls. METHODS: Semiautomatic software was used to reconstruct and measure the parameters in the true midsagittal plane of each vertebra and intervertebral structure that are rotated and tilted in a different way. RESULTS: In AIS, the anterior height of the thoracic curve was 3.6±2.8% longer than the posterior height, 2.0±6.1% longer than the length along the laminae, and 8.7±7.1% longer than the length along the spinous processes, and this differed significantly from controls (-2.7±2.4%, -7.4±5.2%, and +0.7±7.8%; p<.001). The absolute height of the osseous parts did not differ significantly between AIS and controls in the midsagittal plane. In contrast, the intervertebral structures contributed significantly to the observed length discrepancies. In absolute lengths, the anterior side of the disc of the thoracic curve was higher in AIS (5.4±0.8 mm) than controls (4.8±1.0 mm; p<.001), whereas the interspinous space was smaller in AIS (12.3±1.4 mm vs. 14.0±1.6 mm; p<.001). CONCLUSIONS: Based on this in vivo analysis, the true three-dimensional anterior-posterior length discrepancy of AIS curves was found to occur through both anterior column lengthening and posterior column shortening, with the facet joints functioning as the fulcrum. The vertebrae contribute partly to the anterior-posterior length discrepancy accompanied by more significant and possibly secondary increased anterior intervertebral discs height.
Subject(s)
Scoliosis/pathology , Spine/pathology , Tomography, X-Ray Computed/methods , Adolescent , Adult , Case-Control Studies , Child , Cross-Sectional Studies , Female , Humans , Imaging, Three-Dimensional/methods , Intervertebral Disc/pathology , Kyphosis/pathology , Male , Scoliosis/diagnostic imaging , Spine/diagnostic imaging , Young AdultABSTRACT
The interpretation of medical images is a primary task for radiologists. Besides two-dimensional (2D) images, current imaging technologies allow for volumetric display of medical images. Whereas current radiology practice increasingly uses volumetric images, the majority of studies on medical image interpretation is conducted on 2D images. The current study aimed to gain deeper insight into the volumetric image interpretation process by examining this process in twenty radiology trainees who all completed four volumetric image cases. Two types of data were obtained concerning scroll behaviors and think-aloud data. Types of scroll behavior concerned oscillations, half runs, full runs, image manipulations, and interruptions. Think-aloud data were coded by a framework of knowledge and skills in radiology including three cognitive processes: perception, analysis, and synthesis. Relating scroll behavior to cognitive processes showed that oscillations and half runs coincided more often with analysis and synthesis than full runs, whereas full runs coincided more often with perception than oscillations and half runs. Interruptions were characterized by synthesis and image manipulations by perception. In addition, we investigated relations between cognitive processes and found an overall bottom-up way of reasoning with dynamic interactions between cognitive processes, especially between perception and analysis. In sum, our results highlight the dynamic interactions between these processes and the grounding of cognitive processes in scroll behavior. It suggests, that the types of scroll behavior are relevant to describe how radiologists interact with and manipulate volumetric images.
Subject(s)
Cognition , Imaging, Three-Dimensional/methods , Perception , Radiology/education , User-Computer Interface , Adult , Clinical Competence , Educational Measurement , Female , Health Knowledge, Attitudes, Practice , Humans , MaleABSTRACT
STUDY DESIGN: Cross-sectional study. OBJECTIVE: To establish the relevance of the conventional two-dimensional (2D) rib vertebra angle difference (RVAD) and the relationship with the complex three-dimensional (3D) apical morphology in scoliosis. SUMMARY OF BACKGROUND DATA: The RVAD, also known as Mehta angle, describes apical rib asymmetry on conventional radiographs and was introduced as a prognostic factor for curve severity in early onset scoliosis, and later applied to other types of scoliosis as well. METHODS: An existing idiopathic scoliosis database of high-resolution computed tomography scans used in previous work, acquired for spinal navigation, was used. Eighty-eight patients (Cobb angle 46°-109°) were included. Cobb angle and 2D RVAD, as described by Mehta, were measured on the conventional radiographs and coronal digitally reconstructed radiographs (DRR) of the prone computed tomography scans. A previously validated, semiautomatic image processing technique was used to acquire complete 3D spinal reconstructions for the measurement of the 3D RVAD in a reconstructed true coronal plane, axial rotation, and sagittal morphology. RESULTS: The 2D RVAD on the x-ray was on average 25.3°â±â11.0° and 25.6°â±â12.8° on the DRR (Pâ=â0.990), but in the true 3D coronal view of the apex, hardly any asymmetry remained (3D RVAD: 3.1°â±â12.5°; 2D RVAD on x-ray and DRR vs. 3D RVAD: Pâ<â0.001). 2D apical rib asymmetry in the anatomical coronal plane did not correlate with the same RVAD measurements in the 3D reconstructed coronal plane of the rotated apex (râ=â0.155; Pâ=â0.149). A larger 2D RVAD was found to correlate linearly with increased axial rotation (râ=â0.542; Pâ<â0.001) and apical lordosis (râ=â0.522; Pâ<â0.001). CONCLUSION: The 2D RVAD represents a projection-based composite radiographic index reflecting the severity of the complex 3D apical morphology including axial rotation and apical lordosis. It indicates a difference in severity of the apical deformation. LEVEL OF EVIDENCE: 4.
Subject(s)
Ribs/diagnostic imaging , Scoliosis/diagnostic imaging , Spine/diagnostic imaging , Adolescent , Adult , Child , Cross-Sectional Studies , Female , Humans , Male , Rotation , Tomography, X-Ray Computed , Young AdultABSTRACT
INTRODUCTION: Clinical reasoning in diagnostic imaging professions is a complex skill that requires processing of visual information and image manipulation skills. We developed a digital simulation-based test method to increase authenticity of image interpretation skill assessment. METHODS: A digital application, allowing volumetric image viewing and manipulation, was used for three test administrations of the national Dutch Radiology Progress Test for residents. This study describes the development and implementation process in three phases. To assess authenticity of the digital tests, perceived image quality and correspondence to clinical practice were evaluated and compared with previous paper-based tests (PTs). Quantitative and qualitative evaluation results were used to improve subsequent tests. RESULTS: Authenticity of the first digital test was not rated higher than the PTs. Test characteristics and environmental conditions, such as image manipulation options and ambient lighting, were optimized based on participants' comments. After adjustments in the third digital test, participants favored the image quality and clinical correspondence of the digital image questions over paper-based image questions. CONCLUSIONS: Digital simulations can increase authenticity of diagnostic radiology assessments compared with paper-based testing. However, authenticity does not necessarily increase with higher fidelity. It can be challenging to simulate the image interpretation task of clinical practice in a large-scale assessment setting, because of technological limitations. Optimizing image manipulation options, the level of ambient light, time limits, and question types can help improve authenticity of simulation-based radiology assessments.
Subject(s)
Clinical Decision-Making , Educational Measurement/methods , Internship and Residency/organization & administration , Radiology/education , Simulation Training/organization & administration , Humans , Pilot Projects , Program Development , Program EvaluationABSTRACT
BACKGROUND: Patients with adolescent idiopathic scoliosis (AIS) are usually investigated by serial imaging studies during the course of treatment, some imaging involves ionizing radiation, and the radiation doses are cumulative. Few studies have addressed the correlation of spinal deformity captured by these different imaging modalities, for which patient positioning are different. To the best of our knowledge, this is the first study to compare the coronal, axial, and sagittal morphology of the scoliotic spine in three different body positions (upright, prone, and supine) and between three different imaging modalities (X-ray, CT, and MRI). METHODS: Sixty-two AIS patients scheduled for scoliosis surgery, and having undergone standard pre-operative work-up, were included. This work-up included upright full-spine radiographs, supine bending radiographs, supine MRI, and prone CT as is the routine in one of our institutions. In all three positions, Cobb angles, thoracic kyphosis (TK), lumbar lordosis (LL), and vertebral rotation were determined. The relationship among three positions (upright X-ray, prone CT, and supine MRI) was investigated according to the Bland-Altman test, whereas the correlation was described by the intraclass correlation coefficient (ICC). RESULTS: Thoracic and lumbar Cobb angles correlated significantly between conventional radiographs (68° ± 15° and 44° ± 17°), prone CT (54° ± 15° and 33° ± 15°), and supine MRI (57° ± 14° and 35° ± 16°; ICC ≥0.96; P < 0.001). The thoracic and lumbar apical vertebral rotation showed a good correlation among three positions (upright, 22° ± 12° and 11° ± 13°; prone, 20° ± 9° and 8° ± 11°; supine, 16° ± 11° and 6° ± 14°; ICC ≥0.82; P < 0.001). The TK and LL correlated well among three different positions (TK 26° ± 11°, 22° ± 12°, and 17° ± 10°; P ≤ 0.004; LL 49° ± 12°, 45° ± 11°, and 44° ± 12°; P < 0.006; ICC 0.87 and 0.85). CONCLUSIONS: Although there is a generalized underestimation of morphological parameters of the scoliotic deformity in the supine and prone positions as compared to the upright position, a significant correlation of these parameters is still evident among different body positions by different imaging modalities. Findings of this study suggest that severity of scoliotic deformity in AIS patients can be largely represented by different imaging modalities despite the difference in body positioning.
ABSTRACT
RATIONALE AND OBJECTIVES: Radiology expertise is dependent on the use of efficient search strategies. The aim of this study is to investigate the effect of teaching search strategies on trainee's accuracy in detecting lung nodules at computed tomography. MATERIALS AND METHODS: Two search strategies, "scanning" and "drilling," were tested with a randomized crossover design. Nineteen junior radiology residents were randomized into two groups. Both groups first completed a baseline lung nodule detection test allowing a free search strategy, followed by a test after scanning instruction and drilling instruction or vice versa. True positive (TP) and false positive (FP) scores and scroll behavior were registered. A mixed-design analysis of variance was applied to compare the three search conditions. RESULTS: Search strategy instruction had a significant effect on scroll behavior, F(1.3) = 54.2, P < 0.001; TP score, F(2) = 16.1, P < 0.001; and FP score, F(1.3) = 15.3, P < 0.001. Scanning instruction resulted in significantly lower TP scores than drilling instruction (M = 10.7, SD = 5.0 versus M = 16.3, SD = 5.3), t(18) = 4.78, P < 0.001; or free search (M = 15.3, SD = 4.6), t(18) = 4.44, P < 0.001. TP scores for drilling did not significantly differ from free search. FP scores for drilling (M = 7.3, SD = 5.6) were significantly lower than for free search (M = 12.5, SD = 7.8), t(18) = 4.86, P < 0.001. CONCLUSIONS: Teaching a drilling strategy is preferable to teaching a scanning strategy for finding lung nodules.
Subject(s)
Lung Neoplasms/diagnostic imaging , Radiology/education , Cross-Over Studies , Diagnostic Errors/prevention & control , Humans , Radiology/methodsABSTRACT
Objective: Wrist joint space narrowing is a main radiographic outcome of rheumatoid arthritis (RA). Yet, automatic radiographic wrist joint space width (JSW) quantification for RA patients has not been widely investigated. The aim of this paper is to present an automatic method to quantify the JSW of three wrist joints that are least affected by bone overlapping and are frequently involved in RA. These joints are located around the scaphoid bone, viz. the multangular-navicular, capitate-navicular-lunate, and radiocarpal joints. Methods: The joint space around the scaphoid bone is detected by using consecutive searches of separate path segments, where each segment location aids in constraining the subsequent one. For joint margin delineation, first the boundary not affected by X-ray projection is extracted, followed by a backtrace process to obtain the actual joint margin. The accuracy of the quantified JSW is evaluated by comparison with the manually obtained ground truth. Results: Two of the 50 radiographs used for evaluation of the method did not yield a correct path through all three wrist joints. The delineated joint margins of the remaining 48 radiographs were used for JSW quantification. It was found that 90% of the joints had a JSW deviating less than 20% from the mean JSW of manual indications, with the mean JSW error less than 10%. Conclusion: The proposed method is able to automatically quantify the JSW of radiographic wrist joints reliably. SIGNIFICANCE: The proposed method may aid clinical researchers to study the progression of wrist joint damage in RA studies.Objective: Wrist joint space narrowing is a main radiographic outcome of rheumatoid arthritis (RA). Yet, automatic radiographic wrist joint space width (JSW) quantification for RA patients has not been widely investigated. The aim of this paper is to present an automatic method to quantify the JSW of three wrist joints that are least affected by bone overlapping and are frequently involved in RA. These joints are located around the scaphoid bone, viz. the multangular-navicular, capitate-navicular-lunate, and radiocarpal joints. Methods: The joint space around the scaphoid bone is detected by using consecutive searches of separate path segments, where each segment location aids in constraining the subsequent one. For joint margin delineation, first the boundary not affected by X-ray projection is extracted, followed by a backtrace process to obtain the actual joint margin. The accuracy of the quantified JSW is evaluated by comparison with the manually obtained ground truth. Results: Two of the 50 radiographs used for evaluation of the method did not yield a correct path through all three wrist joints. The delineated joint margins of the remaining 48 radiographs were used for JSW quantification. It was found that 90% of the joints had a JSW deviating less than 20% from the mean JSW of manual indications, with the mean JSW error less than 10%. Conclusion: The proposed method is able to automatically quantify the JSW of radiographic wrist joints reliably. SIGNIFICANCE: The proposed method may aid clinical researchers to study the progression of wrist joint damage in RA studies.
Subject(s)
Arthritis, Rheumatoid/diagnostic imaging , Radiographic Image Interpretation, Computer-Assisted/methods , Wrist Joint/diagnostic imaging , Algorithms , Humans , RadiographyABSTRACT
STUDY DESIGN: Cross-sectional. OBJECTIVES: To quantify the asymmetry of the vertebral bodies and pedicles in the true transverse plane in adolescent idiopathic scoliosis (AIS) and to compare this with normal anatomy. SUMMARY OF BACKGROUND DATA: There is an ongoing debate about the existence and magnitude of the vertebral body and pedicle asymmetry in AIS and whether this is an expression of a primary growth disturbance, or secondary to asymmetrical loading. METHODS: Vertebral body asymmetry, defined as left-right overlap of the vertebral endplates (ie, 100%: perfect symmetry, 0%: complete asymmetry) was evaluated in the true transverse plane on CT scans of 77 AIS patients and 32 non-scoliotic controls. Additionally, the pedicle width, length, and angle and the length of the ideal screw trajectory were calculated. RESULTS: Scoliotic vertebrae were on average more asymmetric than controls (thoracic: AIS 96.0% vs. controls 96.4%; p = .005, lumbar: 95.8% vs. 97.2%; p < .001) and more pronounced around the thoracic apex (95.8%) than at the end vertebrae (96.3%; p = .031). In the thoracic apex; the concave pedicle was thinner (4.5 vs. 5.4 mm; p < .001) and longer (20.9 vs. 17.9 mm; p < .001), the length of the ideal screw trajectory was longer (43.0 vs. 37.3 mm; p < .001), and the transverse pedicle angle was greater (12.3° vs. 5.7°; p < .001) than the convex one. The axial rotation showed no clear correlation with the asymmetry. CONCLUSIONS: Even in non-scoliotic controls is a degree of vertebral body and pedicle asymmetry, but scoliotic vertebrae showed slightly more asymmetry, mostly around the thoracic apex. In contrast to the existing literature, there is no major asymmetry in the true transverse plane in AIS and no uniform relation between the axial rotation and vertebral asymmetry could be observed in these moderate to severe patients, suggesting that asymmetrical vertebral growth does not initiate rotation, but rather follows it as a secondary phenomenon. LEVEL OF EVIDENCE: Level 4.
ABSTRACT
INTRODUCTION: Virtual 3D models are powerful tools for teaching anatomy. At the present day, there are a lot of different digital anatomy models, most of these commercial applications are based on a 3D model of a human body reconstructed from images with a 1mm intervals. The use of even smaller intervals may result in more details and more realistic appearances of 3D anatomy models. The aim of this study was to create a realistic and highly detailed 3D model of the hand and wrist based on small interval cross-sectional images, suitable for undergraduate and postgraduate teaching purposes with the possibility to perform a virtual dissection in an educational application. METHODS: In 115 transverse cross-sections from a human hand and wrist, segmentation was done by manually delineating 90 different structures. With the use of Amira the segments were imported and a surface model/polygon model was created, followed by smoothening of the surfaces in Mudbox. In 3D Coat software the smoothed polygon models were automatically retopologied into a quadrilaterals formation and a UV map was added. In Mudbox, the textures from 90 structures were depicted in a realistic way by using photos from real tissue and afterwards height maps, gloss and specular maps were created to add more level of detail and realistic lightning on every structure. Unity was used to build a new software program that would support all the extra map features together with a preferred user interface. CONCLUSION: A 3D hand model has been created, containing 100 structures (90 at start and 10 extra structures added along the way). The model can be used interactively by changing the transparency, manipulating single or grouped structures and thereby simulating a virtual dissection. This model can be used for a variety of teaching purposes, ranging from undergraduate medical students to residents of hand surgery. Studying the hand and wrist anatomy using this model is cost-effective and not hampered by the limited access to real dissecting facilities.
Subject(s)
Imaging, Three-Dimensional , Models, Anatomic , Software , User-Computer Interface , Anatomy , Cross-Sectional Studies , HumansABSTRACT
STUDY DESIGN: Cross-sectional study. OBJECTIVE: To investigate the presence and magnitude of anterior spinal overgrowth in neuromuscular scoliosis and compare this with the same measurements in idiopathic scoliosis and healthy spines. SUMMARY OF BACKGROUND DATA: Anterior spinal overgrowth has been described as a potential driver for the onset and progression of adolescent idiopathic scoliosis (AIS). Whether this anterior overgrowth is specific for AIS or also present in nonidiopathic scoliosis has not been reported. METHODS: Supine computed tomography (CT) scans of thirty AIS patients (thoracic Cobb 21-81°), thirty neuromuscular (NM) scoliotic patients (thoracic Cobb 19-101°) and 30 nonscoliotic controls were used. The difference in length in per cents between the anterior and posterior side {[(ΔA-P)/P]*100%, abbreviated to A-P%} of each vertebral body and intervertebral disc, and between the anterior side of the spine and the spinal canal (A-C%) were determined. RESULTS: The A-P% of the thoracic curves did not differ between the AIS (+1.2â±â2.2%) and NM patients (+0.9â±â4.1%, Pâ=â0.663), both did differ, however, from the same measurements in controls (-3.0â±â1.6%; Pâ<â0.001) and correlated linearly with the Cobb angle (AIS râ=â0.678, NM râ=â0.687). Additional anterior length was caused by anterior elongation of the discs (AIS: A-P% disc +17.5â±â12.7% vs. A-P% body -2.5â±â2.6%; Pâ<â0.001, NM: A-P% disc +19.1â±â18.0% vs. A-P% body -3.5â±â5.1%; Pâ<â0.001). The A-C% T1-S1 in AIS and NM patients were similar (+7.9â±â1.8% and +8.7â±â4.0%, Pâ=â0.273), but differed from the controls (+4.2â±â3.3%; Pâ<â0.001). CONCLUSION: So called anterior overgrowth has been postulated as a possible cause for idiopathic scoliosis, but apparently it occurs in scoliosis with a known origin as well. This suggests that it is part of a more generalized scoliotic mechanism, rather than its cause. The fact that the intervertebral discs contribute more to this increased anterior length than the vertebral bodies suggests an adaptation to altered loading, rather than a primary growth disturbance. LEVEL OF EVIDENCE: 4.
Subject(s)
Intervertebral Disc/diagnostic imaging , Scoliosis/diagnostic imaging , Thoracic Vertebrae/diagnostic imaging , Adolescent , Child , Cross-Sectional Studies , Disease Progression , Female , Humans , Male , Scoliosis/etiology , Supine Position , Tomography, X-Ray Computed , Young AdultABSTRACT
BACKGROUND: Misinterpretation of medical images is an important source of diagnostic error. Errors can occur in different phases of the diagnostic process. Insight in the error types made by learners is crucial for training and giving effective feedback. Most diagnostic skill tests however penalize diagnostic mistakes without an eye for the diagnostic process and the type of error. A radiology test with stepwise reasoning questions was used to distinguish error types in the visual diagnostic process. We evaluated the additional value of a stepwise question-format, in comparison with only diagnostic questions in radiology tests. METHODS: Medical students in a radiology elective (n=109) took a radiology test including 11-13 cases in stepwise question-format: marking an abnormality, describing the abnormality and giving a diagnosis. Errors were coded by two independent researchers as perception, analysis, diagnosis, or undefined. Erroneous cases were further evaluated for the presence of latent errors or partial knowledge. Inter-rater reliabilities and percentages of cases with latent errors and partial knowledge were calculated. RESULTS: The stepwise question-format procedure applied to 1351 cases completed by 109 medical students revealed 828 errors. Mean inter-rater reliability of error type coding was Cohen's κ=0.79. Six hundred and fifty errors (79%) could be coded as perception, analysis or diagnosis errors. The stepwise question-format revealed latent errors in 9% and partial knowledge in 18% of cases. CONCLUSIONS: A stepwise question-format can reliably distinguish error types in the visual diagnostic process, and reveals latent errors and partial knowledge.
Subject(s)
Clinical Competence , Diagnostic Errors/classification , Radiology/education , Students, Medical , Educational Measurement/methods , Humans , Perception , Radiography/methods , Reproducibility of ResultsABSTRACT
Computerized methods promise quick, objective, and sensitive tools to quantify progression of radiological damage in rheumatoid arthritis (RA). Measurement of joint space width (JSW) in finger and wrist joints with these systems performed comparable to the Sharp-van der Heijde score (SHS). A next step toward clinical use, validation of precision and accuracy in hand joints with minimal damage, is described with a close scrutiny of sources of error. A recently developed system to measure metacarpophalangeal (MCP) and proximal interphalangeal (PIP) joints was validated in consecutive hand images of RA patients. To assess the impact of image acquisition, measurements on radiographs from a multicenter trial and from a recent prospective cohort in a single hospital were compared. Precision of the system was tested by comparing the joint space in mm in pairs of subsequent images with a short interval without progression of SHS. In case of incorrect measurements, the source of error was analyzed with a review by human experts. Accuracy was assessed by comparison with reported measurements with other systems. In the two series of radiographs, the system could automatically locate and measure 1003/1088 (92.2%) and 1143/1200 (95.3%) individual joints, respectively. In joints with a normal SHS, the average (SD) size of MCP joints was [Formula: see text] and [Formula: see text] in the two series of radiographs, and of PIP joints [Formula: see text] and [Formula: see text]. The difference in JSW between two serial radiographs with an interval of 6 to 12 months and unchanged SHS was [Formula: see text], indicating very good precision. Errors occurred more often in radiographs from the multicenter cohort than in a more recent series from a single hospital. Detailed analysis of the 55/1125 (4.9%) measurements that had a discrepant paired measurement revealed that variation in the process of image acquisition (exposure in 15% and repositioning in 57%) was a more frequent source of error than incorrect delineation by the software (25%). Various steps in the validation of an automated measurement system for JSW of MCP and PIP joints are described. The use of serial radiographs from different sources, with a short interval and limited damage, is helpful to detect sources of error. Image acquisition, in particular repositioning, is a dominant source of error.
ABSTRACT
OBJECTIVES: To compare as proof of concept the sensitivity to change of automated quantification of radiographic wrist and hand joint space width (JSW) with scoring JSW according to the Sharp/van der Heijde scoring method (SHS) in two strategy groups of a treat-to-target and tight-control early rheumatoid arthritis (RA) study. METHODS: Digital radiographs were assessed for JSW changes of 134 patients of the 236 patients participating in the second Computer Assisted Management in Early Rheumatoid Arthritis trial, of whom both baseline and year 2 radiographs were available (year 1 radiographs n=125). Of those 134 patients, 70 started with methotrexate and prednisone (MTX+Pred) and 64 with MTX and placebo (MTX+Plac). JSW change over 1 and 2 years of the hands and wrists was assessed, applying both the joint space narrowing (JSN) subscore of the SHS by 2 readers and the automated assessment with the JSW quantification software 'JSQ'. For both methods, progression of JSW change of the hand and wrist was analysed using linear mixed modelling (dependent variable 'JSW', factor 'strategy group', covariate 'follow-up time in years', interaction term 'strategy group*follow-up time'; radiographs of baseline, year 1 and year 2 were used). For each method the standardised mean difference (SMD) for the change in JSW from baseline to year 2 between the treatment strategies was obtained using a non-parametric method. RESULTS: Patient characteristics of the current subpopulation were similar to those of the whole study population. JSN of the hand and wrist according to SHS at 2 years was present in 16 vs. 23% in the MTX+Pred group vs. the MTX+Plac group. The mean yearly progression rates of JSW change of the hands and wrists using JSQ were -0.00mm (95% confidence interval (CI) -0.01; 0.01) for MTX+Pred vs. -0.02mm (95%CI -0.03; -0.01) for MTX+Plac, p=0.045, and using SHS JSN they were 0.19 units (95%CI 0.09; 0.30) vs. 0.30 units (95%CI 0.14; 0.45) for MTX+Pred vs. MTX+Plac, p=0.271. The SMD for the change from baseline to year 2 between the treatment strategies was 0.37 for JSQ and 0.13 for SHS JSN. CONCLUSIONS: In this proof of concept study the yearly progression rate of JSW change of hand and wrist joints, according to the automated JSW quantification software package 'JSQ', was higher in the group initiating MTX+Plac than in the group initiating MTX+Pred. A similar trend was seen with the JSN assessment according to the SHS method of the hand and wrist. However, JSN of the hand and wrist according to SHS, the current gold standard to assess radiographic progression, was seen in only about 20%. Therefore, further studies are needed to conclude firmly that JSQ should be incorporated into quantitative scoring of radiographs in RA.
Subject(s)
Arthritis, Rheumatoid/diagnostic imaging , Hand Joints/diagnostic imaging , Radiographic Image Interpretation, Computer-Assisted , Wrist Joint/diagnostic imaging , Adult , Aged , Antirheumatic Agents/therapeutic use , Arthritis, Rheumatoid/drug therapy , Automation , Disease Progression , Drug Therapy, Combination , Female , Hand Joints/drug effects , Humans , Linear Models , Male , Methotrexate/therapeutic use , Middle Aged , Netherlands , Predictive Value of Tests , Prednisone/therapeutic use , Reproducibility of Results , Severity of Illness Index , Time Factors , Treatment Outcome , Wrist Joint/drug effectsABSTRACT
INTRODUCTION: Although much attention has been given to the global three-dimensional aspect of adolescent idiopathic scoliosis (AIS), the accurate three-dimensional morphology of the primary and compensatory curves, as well as the intervening junctional segments, in the scoliotic spine has not been described before. METHODS: A unique series of 77 AIS patients with high-resolution CT scans of the spine, acquired for surgical planning purposes, were included and compared to 22 healthy controls. Non-idiopathic curves were excluded. Endplate segmentation and local longitudinal axis in endplate plane enabled semi-automatic geometric analysis of the complete three-dimensional morphology of the spine, taking inter-vertebral rotation, intra-vertebral torsion and coronal and sagittal tilt into account. Intraclass correlation coefficients for interobserver reliability were 0.98-1.00. Coronal deviation, axial rotation and the exact length discrepancies in the reconstructed sagittal plane, as defined per vertebra and disc, were analyzed for each primary and compensatory curve as well as for the junctional segments in-between. RESULTS: The anterior-posterior difference of spinal length, based on "true" anterior and posterior points on endplates, was +3.8% for thoracic and +9.4% for (thoraco)lumbar curves, while the junctional segments were almost straight. This differed significantly from control group thoracic kyphosis (-4.1%; P<0.001) and lumbar lordosis (+7.8%; P<0.001). For all primary as well as compensatory curves, we observed linear correlations between the coronal Cobb angle, axial rotation and the anterior-posterior length difference (r≥0.729 for thoracic curves; r≥0.485 for (thoraco)lumbar curves). CONCLUSIONS: Excess anterior length of the spine in AIS has been described as a generalized growth disturbance, causing relative anterior spinal overgrowth. This study is the first to demonstrate that this anterior overgrowth is not a generalized phenomenon. It is confined to the primary as well as the compensatory curves, the junctional zones do not exhibit this growth discrepancy, however, they are straight.
Subject(s)
Scoliosis/pathology , Adolescent , Adult , Case-Control Studies , Female , Humans , Imaging, Three-Dimensional , Male , Scoliosis/diagnostic imaging , Scoliosis/surgery , Tomography, X-Ray ComputedABSTRACT
OBJECTIVES: Deep medullary veins support the venous drainage of the brain and may display abnormalities in the context of different cerebrovascular diseases. We present and evaluate a method to automatically detect and quantify deep medullary veins at 7 T. METHODS: Five participants were scanned twice, to assess the robustness and reproducibility of manual and automated vein detection. Additionally, the method was evaluated on 24 participants to demonstrate its application. Deep medullary veins were assessed within an automatically created region-of-interest around the lateral ventricles, defined such that all veins must intersect it. A combination of vesselness, tubular tracking, and hysteresis thresholding located individual veins, which were quantified by counting and computing (3-D) density maps. RESULTS: Visual assessment was time-consuming (2 h/scan), with an intra-/inter-observer agreement on absolute vein count of ICC = 0.76 and 0.60, respectively. The automated vein detection showed excellent inter-scan reproducibility before (ICC = 0.79) and after (ICC = 0.88) visually censoring false positives. It had a positive predictive value of 71.6 %. CONCLUSION: Imaging at 7 T allows visualization and quantification of deep medullary veins. The presented method offers fast and reliable automated assessment of deep medullary veins. KEY POINTS: ⢠Deep medullary veins support the venous drainage of the brain ⢠Abnormalities of these veins may indicate cerebrovascular disease and quantification is needed ⢠Automated methods can achieve this and support human observers ⢠The presented method provides robust and reproducible detection of veins ⢠Intuitive quantification is provided via count and venous density maps.
Subject(s)
Cerebral Veins/diagnostic imaging , Magnetic Resonance Angiography/methods , Adult , Aged , Brain/diagnostic imaging , Cerebral Veins/anatomy & histology , Female , Humans , Image Interpretation, Computer-Assisted/methods , Male , Observer Variation , Reproducibility of ResultsABSTRACT
The assessment of joint space width (JSW) on hand X-ray images of patients suffering from rheumatoid arthritis (RA) is a time-consuming task. Manual assessment is semiquantitative and is observer dependent which hinders an accurate evaluation of joint damage, particularly in the early stages. Automated analysis of the JSW is an important step forward since it is observer independent and might improve the assessment sensitivity in the early RA stage. This study proposes a fully automatic method for both joint location and margin detection in RA hand radiographs. The location detection procedure is based on image features of the joint region and is aided by geometric relationship of finger joints. More than 99% of joint locations are detected with an error smaller than 3 mm with respect to the manually indicated gold standard. The joint margins are detected by combining intensity values and spatially constrained intensity derivatives, refined by an active contour model. More than 96% of the joints are successfully delineated. The JSW is calculated over the middle 60% of a landmark-defined joint span. The overall JSW error compared with the ground truth is 6.8%. In conclusion, the proposed method is able to automatically locate the finger joints in RA hand radiographs, and to quantify the JSW of these joints.
Subject(s)
Arthritis, Rheumatoid/diagnostic imaging , Finger Joint/diagnostic imaging , Finger Phalanges/diagnostic imaging , Radiographic Image Interpretation, Computer-Assisted/methods , Adult , Female , Humans , MaleABSTRACT
OBJECTIVES: To compare computerised and conventional methodology of radiographic joint destruction assessment in early rheumatoid arthritis (RA). METHODS: We investigated the contribution of the 3rd-to-5th carpometacarpal joints (CMC3-5, which are excluded in computerised assessment so far owing to bone overlapping) to total joint space narrowing (JSN) scores in two cohorts of patients with early RA (n=392). Next, we investigated agreement between JSN scoring using single time point individual joint-based method (individual joint of a single time point (IJSTP), reflecting computerised reading) and conventional JSN scoring using the Sharp-van der Heijde (SvdH) method in a cohort of patients with early RA (n=59). We used intraclass correlation coefficients (ICCs), Bland and Altman plots, and linear mixed modelling to analyse differences in progression between two methods. Radiographs were available at baseline, and at 1 and 2â years of follow-up. RESULTS: Of all joints affected by JSN at baseline or JSN progression during 2â years of follow-up, 3.9% and 6.6% concerned CMC3-5. Exclusion of CMC3-5 resulted in a decrease of 1.9-4.6% in JSN progression scores during 2â years of follow-up. The ICCs for JSN progression scores using IJSTP with or without CMC3-5 compared with SvdH were 0.71-0.81 and 0.69-0.78 at 1 and 2â years of follow-up. Signal-to-noise ratios for IJSTP-based and SvdH scoring were 0.51 and 0.58, respectively. The progression rate for each year was not statistically significantly different between two scoring methods (p=0.59 and 0.89). CONCLUSIONS: This study showed that excluding CMC3-5 has limited influence on JSN (progression) scores and showed the feasibility of using IJSTP-based reading for computerised scoring of JSN (progression) in RA.