Final design of the beam source for the MITICA injector.

The megavolt ITER injector and concept advancement experiment is the prototype and the test bed of the ITER heating and current drive neutral beam injectors, currently in the final design phase, in view of the installation in Padova Research on Injector Megavolt Accelerated facility in Padova, Italy. The beam source is the key component of the system, as its goal is the generation of the 1 MeV accelerated beam of deuterium or hydrogen negative ions. This paper presents the highlights of the latest developments for the finalization of the MITICA beam source design, together with a description of the most recent analyses and R&D activities carried out in support of the design.

Interpretation of laboratory data and need for reference laboratories.

A single positive laboratory test among those exploring the presence of antiphospholipid antibodies is not associated with thromboembolic events and does not identify patients with antiphospholipid syndrome. On the other hand, more than one laboratory test positive, and in particular all three tests positive, is strongly associated to thromboembolic events and identifies high risk patients. Triple positivity is in fact related to the presence of a specific anti-ß2-glycoprotein I (anti-Domain I) antibody, also able to prolong coagulation tests. Monoclonal antibodies against Domain I with Lupus Anticoagulant activity might be candidate material for standardization of antiphospholipid assays. Much work remains to be done in this field.

Tumor response is predicted by patient genetic profile in rectal cancer patients treated with neo-adjuvant chemo-radiotherapy.

The aim of the study was the identification of a pharmacogenetic profile predictive of the tumor regression grade (TRG), considered as tumor response parameter, after neo-adjuvant treatment in rectal cancer patients. A total of 238 rectal cancer patients treated in a neo-adjuvant setting by a fluoropyrimidines-based chemo-radiotherapy (RT) were genotyped for 25 genetic polymorphisms in 16 genes relevant for treatment-associated pathways. Two polymorphisms were associated with TRG in a multivariate analysis: hOGG1-1245C > G, which can affect radiosensitivity and MTHFR-677C > T, which is involved in fluoropyrimidines action. Patients bearing at least one variant allele had a lower chance to get TRG ≤ 2 (OR = 0.46 95% CI 0.23-0.90, P = 0.024; and OR = 0.48 95% CI 0.24-0.96, P = 0.034; respectively). An association trend was observed for ABCB1-3435C > T, which is responsible for the multi-drug resistance (odds ratio (OR) = 1.96, 95% confidence interval (CI) 0.98-3.95, P = 0.057). Exploratory classification and regression tree (CART) analysis highlighted high-order gene-gene and gene-environment interactions and a genetic signature associated with differential response, with hOGG1-1245C > G as the most predictive factor. Other significant variables were: ABCB1-3435C > T, MTHFR-677C > T, ERCC1-8092C > A, ABCC2-1249G > A, XRCC1-28152G > A, XRCC3-4541A > G and patients gender. On the basis of CART results, patients were categorized into three groups according to tumor response probability: intermediate and high profiles had a higher probability to get TRG ≤ 2 as compared with low profiles (OR = 4.12 95% CI 1.46-11.65, P < 0.001 and OR = 12.44, 95% CI 5.52-28.04, P < 0.0001, respectively). This study evidences a major role of hOGG1-1245C > G and MTHFR-677C > T polymorphisms in the tumor response of rectal cancer patients treated with chemo-RT in neo-adjuvant setting, and shows the relevance of gene-gene and gene-environment interactions for complex phenotypes as tumor response.

MicroCT examination of human bone specimens: effects of polymethylmethacrylate embedding on structural parameters.

X-ray microtomography permits the nondestructive investigation of trabecular and cortical bone specimens without special preparation of the sample. To do a quantitative characterization, the cross-section images have to be binarized, separating bone from nonbone. For this purpose, a widely used method is uniform thresholding. However, for commonly available microtomography scanners which use a polychromatic X-ray source, it is unclear what effect the surrounding medium (e.g. air, saline solution, polymethylmethacrylate) has on the threshold value used for the binarization. In the literature an easy procedure to find the optimal uniform threshold value for a given acquisition condition is reported. By applying this procedure, the present work investigated whether a microtomography scan of trabecular bone samples in air or embedded in polymethylmethacrylate gave the same results in terms of structural parameters. The gold standard, that is, histological sections, was used as a reference. Two fixed threshold values were found, one for the microtomography scans performed in air and one for the scans with the same samples embedded in polymethylmethacrylate. These were applied on the correspondent microtomography images for the estimation of structural parameters, such as bone volume fraction, direct trabecular thickness, direct trabecular separation and structure model index. Paired comparisons were made in bone volume fraction between histological sections and microtomography cross-sections for the same bone samples scanned first in air and then embedded in polymethylmethacrylate, by which no significant differences were found. Paired comparisons were also made in bone volume fraction, direct trabecular thickness, direct trabecular separation and structure model index for the same samples over volumes of interest of 4 x 4 x 4 mm3 between microtomography scans in air and scans with the samples embedded in polymethylmethacrylate. Neither these comparisons showed significant differences. This leads to the conclusion that structural parameters estimated by microtomography for human trabecular bone samples scanned either in air or embedded in polymethylmethacrylate are not affected by the surrounding medium (i.e. presence or absence of polymethylmethacrylate), provided that the corresponding optimal threshold value is applied for each acquisition condition.

Evaluation of methotrexate and corticosteroids for the treatment of localized scleroderma (morphoea) in children.

BACKGROUND: Localized scleroderma (LS) or morphoea is often considered to be a benign self-limiting condition confined to the skin and subcutaneous tissue. However, the course of the disease is unpredictable and severe functional and cosmetic disability may result. Drug treatment with systemic corticosteroids in combination with methotrexate has been reported to be beneficial in LS, but data in children is limited. OBJECTIVES: To evaluate the efficacy and tolerability of systemic corticosteroids in combination with methotrexate in children with LS. METHODS: Treatment and outcome of 34 patients with LS were retrospectively analysed. Pulsed intravenous methylprednisolone was given, followed by oral prednisolone on a reducing regimen and maintenance treatment with methotrexate. We assessed treatment outcome clinically and by thermography and monitored adverse events. RESULTS: From the onset of treatment, the disease stopped progressing in 94% of the patients. All patients demonstrated significant clinical improvement within a mean time of 5.7 +/- 3.9 months. Mean duration of follow-up over the treatment period and beyond was 2.9 +/- 2.0 years. In 16 (47%) patients therapy was discontinued when the disease was considered to be inactive clinically; however, seven (44%) of the 16 developed a relapse, necessitating repeat treatment. At last follow-up (range 0.2-7.0 years), 24 (71%) of the 34 patients had completely inactive disease. Observed adverse events were moderate and transient and no patient had to stop therapy. CONCLUSIONS: These data suggest that systemic corticosteroids and methotrexate in combination are beneficial and well tolerated in the treatment of children with LS. Because of the risk of relapse after discontinuing therapy, long-term monitoring is mandatory.

A case report of fracture of ceramic head in total hip arthroplasty: histological and biochemical features of perimplant tissues.

The authors analyzed the case of a patient with a non-cemented hip prosthesis with a ceramic-ceramic coupling. As a consequence of trauma the head fractured. Although the patient could feel the joint grinding, there was no pain and he continued daily living activities for nearly six months, which led to marked wearing of the ceramic head. SEM analysis with microprobe showed 'planed' surfaces on the ceramic head, suggesting repeated movements between the fractured components. Inside the cone of the head, signs of TiAlV, which is an alloy of the prosthetic stem, could be seen. Periprosthetic tissues were packed with ceramic wear particles of sizes ranging between 0.2 and 10 microns, according to the harvest site. Metal and mixed particles were also found. IL1, IL6, IL8 and IL10 assays in the synovial liquid confirmed the inflammatory state and a modest induction of bone resorption, which was less than that observed in patients with loosened metal-polyethylene couplings. The humoral picture was compatible with the radiological aspect, which did not show marked signs of bone resorption. In revision surgery both ceramic components were replaced by a metal head and polyethylene liner. The clinical outcome after 12 months was very good.

Determination of crystallinity and crystal structure of Hylamer polyethylene after in vivo wear.

Hylamer polyethylene is a crystalline form of polyethylene of 70% crystallinity whereas conventional polyethylene (PE) has 50% crystallinity. Crystallinity is the percentage by weight of the crystalline phase present in the whole polymer, which comprises both amorphous and crystalline phases. Clinical experience has shown that Hylamer components used in joint prostheses, if sterilized by gamma rays in the presence of oxygen, are easily affected by wear, which leads to osteolysis. The authors have analyzed the crystallinity of polyethylene liners removed from seven patients who had received Hylamer polyethylene implants sterilized by gamma rays in air and had suffered prosthetic loosening, using Raman spectroscopy coupled with partial least squares (PLS) analysis. The results have been compared to those of two controls who had received Hylamer polyethylene implants sterilized by gamma irradiation in a nitrogen atmosphere. The crystal structure of wear particles released into the tissues from the Hylamer liners sterilized by gamma rays in air is also studied. The materials undergoing two different types of sterilization methods show different crystallinity values (71.50 vs. 69.43), but the crystallinity do not change according to wear (worn and unworn liner region). Both monoclinic and orthorhombic phases are present in the liner, while in wear debris prevalently monoclinic crystals are found in both types of sterilized liners. Different crystallinity rates can explain different wear rates observed in vivo.

Behavior of Hylamer polyethylene in hip arthroplasty: comparison of two gamma sterilization techniques.

Hylamer polyethylene was introduced in the 1990s as an alternative to conventional polyethylene. Its chemical and physical properties, and especially its high crystallinity, were claimed to improve resistance to wear. Initially Hylamer devices were sterilized by gamma radiation in air, then the technique was changed and gamma radiation was performed in the absence of oxygen. Clinical experience has shown the early loosening of some devices made from Hylamer. The aim of this study was to ascertain whether early wear and consequent osteolysis was linked to the sterilization method. We retrospectively compared 31 patients with hip prostheses with Hylamer liners sterilized by gamma radiation in air (group 1) with 30 patients with the same prosthesis, but sterilized in the absence of oxygen (group 2). The groups were similar for sex, age, disease, head diameter and material. Mean follow-up was 84 months and no clinical signs of failure were present. Radiographic measurement revealed that wear of group 1 was significantly greater than that of group 2 (0.23 mm/year vs 0.09 mm/year, p=0.001). Periacetabular and femoral osteolysis in group 1 was significantly greater than group 2. In conclusion, the method of sterilization might have influenced the outcome of Hylamer polyethylene liners.

Isolation and characterization of wear debris generated in patients wearing polyethylene Hylamer inserts, gamma irradiated in air.

Hylamer polyethylene was used in the early 1990s to make hip-joint components. Clinical experience has shown that these components, if sterilized by gamma rays in the presence of oxygen, are easily affected by wear, which then leads to osteolysis. The authors analyzed polyethylene wear particles in seven patients who had received Hylamer polyethylene implants sterilized by gamma rays in air and had suffered prosthetic loosening. The results were compared to those of six controls, who had received traditional polyethylene implants, sterilized by the same method. The frequency distribution of globular and fibrillar particles was similar in both groups (38.5% in Hylamer, 45.2% in controls). The globular particles in the Hylamer samples had a mean area of 0.12 microm2, which was significantly lesser than that of the controls (0.30 microm2). The width of fibrillar particles in the Hylamer samples was significantly lesser than that of the controls. Therefore, the two materials, despite undergoing the same type of sterilization, produced different types of wear, due to their different properties. In conclusion, the difference in the morphology of Hylamer polyethylene wear particles in comparison with PCA might have caused a more intensive biological response, early and massive osteolysis, and therefore, early loosening.

Surgical treatment of recurrent endometrial carcinoma.

BACKGROUND: Surgery does not have a definite role in the treatment of patients with recurrent endometrial carcinoma, except for those with central pelvic recurrences. The authors describe their experience with surgery in patients with abdominal endometrial recurrences. METHODS: Between 1988 and 2000, 75 patients with abdominal and pelvic endometrial recurrences underwent secondary rescue surgery. Patients were classified according to the presence or absence of residual tumor after surgery. Therapy after rescue surgery was undertaken at the discretion of the medical oncologist. The progression-free interval and overall survival were defined as the time from secondary rescue surgery to the specific event and were evaluated by the Kaplan-Meier method and the log-rank test. A Cox proportional hazards regression model was used to compare survival with covariates. RESULTS: Fifty-six patients (74.7%) underwent optimal debulking. Major surgical complications were observed in 23 patients (30.7%). Only 1 postoperative death was observed, although the mortality rate for surgical complications after the postoperative period was 8%. Patients who underwent optimal debulking had a significantly better cumulative survival rate compared with patients who had residual disease (36% vs. 0% at 60 months; P < 0.05). Residual disease, chemotherapy after rescue surgery, and central pelvis-vagina as the only site of recurrence were associated significantly with survival. CONCLUSIONS: The authors found that this approach was very challenging in terms of the procedures involved, the incidence of major surgical complications, and the high mortality rate. It was useful in increasing overall survival, provided that patients were free of macroscopic disease. Careful selection of patients is needed to minimize mortality.

Nitric oxide synthase in tissues around failed hip prostheses.

Nineteen patients who had undergone hip revision surgery for aseptic loosening of joint prostheses were studied. Tissue samples were harvested at the interface between bone and implant, either at the stem or at the cotyle level. Immunohistochemistry was performed on tissue sections to detect nitric oxide synthase (NOS), the enzyme which enables the synthesis of nitric oxide (NO), a molecule which can activate bone resorption. Quantitative analysis of the positive cells and correlation with the presence of particulate wear debris and radiological data were performed. The authors observed a trend towards a moderate increase in positive cells due to inducible NOS in tissues containing particulate wear debris, especially of a plastic material. This increase, however, did not achieve statistical significance. On the contrary, there was a statistical correlation between iNOS (inducible NOS) and the severity of osteolysis around the prosthetic implant. Pharmacological control of the biosynthesis of NO may be considered in the prevention or treatment of loosening.

Knowledge and attitudes of Italian medical staff towards the approach and treatment of patients in pain.

This study is part of the project, "Towards a Pain-Free Hospital," which aims at improving the approach and treatment of the patient in pain. The objective of the study was to evaluate the knowledge and attitudes of doctors and nurses on the wards of a 1000-bed general hospital located in a rather densely-populated, industrialized area of Italy regarding the following topics: attention paid to pain, the use of analgesic drugs, and pain in children. In total, 669 nurses and 225 doctors completed a 16-item questionnaire evaluating knowledge and beliefs about pain. The overall percentage of correct answers was 61% (9.7/16). The score varied among the different wards and ranged from 48% (7.8/16) to 76% (12.3/16). Physicians scored 65% and nurses 59% (p < 0.001). The percentage of correct answers varied widely among the different items (from 30% to 96%). From these results, we conclude that there are still significant knowledge deficits and erroneous beliefs that may hamper treatment of the patient in pain. These results will help in conducting educational programs aimed at improving pain treatment in the different departments of the hospital.

Sister chromatid exchange in patients with joint prostheses.

The evaluation of sister chromatid exchanges (SCE) is used to establish the cytogenic damage in subjects exposed to toxic substances. The test is considered to be 1 of the most sensitive and accurate indicators of damage and responds to toxic chemicals at low doses. We evaluated the incidence of SCE in peripheral lymphocytes of patients with articular prostheses. Subjects with prostheses made of titanium-aluminium-vanadium alloys presented a significantly higher SCE number than the control population (6.3+/-2.3 vs 4.4+/-1.3; P = .0128), whereas subjects with prostheses made of chrome-cobalt alloy or mixed prostheses presented a higher SCE value than the controls but not significantly different. The presence of high-frequency cells was alarming only in 5 patients, 4 of whom had titanium alloy prostheses, whereas none belonged to the control group. The number of SCE was not affected by the presence of bone-cement used in prosthesis fixation or by the implant duration. The indication of possible cytogenic damage in patients with titanium alloy prostheses that emerged from this study should be considered carefully, even though the sample population was small.

Cytokines and osteolysis around total hip prostheses.

The aim of this work is to assess the correlation between the osteolysis around the prosthesis and the presence of cytokines favouring inflammation in the tissues at the interface between loosened prosthesis and bone. In this study, twenty-nine patients that underwent revision surgery were examined. Bioptic samples were collected at the interface between bone and implant both at the stem and socket level. Semiquantitative immunohistochemistry was performed to detect interleukin 1 alpha, interleukin 1 beta, interleukin 6 and tumour necrosis factor, cytokines that directly cause bone resorption and indirectly induce synthesis of other bone resorbing cytokines. Wear particles were identified and quantified by light microscopy. Radiographic evidence for osteolysis was scored by the Engh and Bobyn score. In tissues collected at the interface, the percentage of cells positive to IL1, IL6 and particularly to TNF increased in relation to the tissues collected at the interface with stable components. The cells occurring in the new capsule do not secrete cytokines in quantities that can be related to severity of wear. Cemented prostheses showed higher incidence of severe osteolysis, and higher levels of cytokines. It can be concluded that TNF, and to a lesser extent IL1 and IL6, are positively related to the severity of osteolysis around the prosthesis and therefore a pharmacological treatment can be hypothesized with anti-inflammatory or anti-cytokine drugs in order to limit or to avoid prosthesis loosening.

Osteochondrodystrophic lesions in chelated thalassemic patients: an histological analysis.

Some patients affected by thalassemia major and treated with an iron-chelating drug such as deferioxamine can suffer from severe osteochondrodystrophic lesions of the long bones. These lesions were radiologically and clinically evident in 2.8% of the patients we examined over the last 10 years. The aim of our research was to evaluate the morphology and morphometry of five tibial biopsy specimens taken from thalassemic patients with bone lesions and two bone biopsy specimens taken from thalassemic patients with no alteration of the long bones. All the bone samples showed a similar morphostructure. Abnormal chondrocytes, alteration of cartilage staining pattern, irregular columnar cartilage, and lacunae in the cartilaginous tissue were revealed histologically. Osteoid thickness was either normal or slightly increased. Some bone trabeculae had microfractures and some had cartilagineous oases. In five cases, iron deposition was detectable by Perls' Prussian Blue staining. It can be concluded that even in patients without radiographic signs of lesions, seriously damaged columnar cartilage, altered bone mineralization, and microfractures are common.

In vitro investigation of aluminum and fluoride release from compomers, conventional and resin-modified glass-ionomer cements: a standardized approach.

The amount of fluoride release from dental cements necessary for an anticariogenic effect is not established: moreover, the possible toxic effects due to high fluoride and aluminum release are not well known and the results are still controversial. The aim of our study was to evaluate fluoride (F) and aluminum (Al) release from dental cements using a 'standardized approach' according to the end-use of the materials, i.e. biocompatibility testing. Two polyacid-modified resin composites of recent application, commonly called compomers (Dyract and Dyract Cem), were compared with two conventional acid-based (Fuji I, Ketac-Cem) and two resin-modified (Vitremer, Vitrebond) glass-ionomer cements (GICs). All types of cement are used in dentistry and are commercially available. Extracts of the cements into minimum essential medium, after setting over a 1-h (group A) and 1-week (group B) period, were performed. The extraction conditions were rigorously standardized. Mean values +/- standard deviation of F- and Al-levels in such extracts were measured and were expressed as microg g(-1) (micrograms of ions per gram of cement). A great difference in the amount of ion release, both F and Al, was shown among the tested materials. The GICs, as well as Ketac-Cem, released more F and Al than the compomers. All of the materials released the greatest proportion of ions when the extraction was performed in the first hour after mixing (group A). Al- and F-values showed a highly significant positive correlation, independently from the curing time. We conclude that the biological assessment of dental cements can be performed only if a pre-evaluation of the leachables is obtained by applying a standardized protocol which allows a useful comparison between the different materials.

Apoptosis in peri-implant tissue.

The authors examined 54 biopsies taken from the tissue surrounding loosened hip joint prostheses. In situ apoptotic cell identification was performed by the detection of single- and double-stranded DNA breaks that occurred in the early stages of apoptosis. Both types of breaks can be revealed by labeling the free 3'-OH termini with modified nucleotides (fluoresceine-dUTP) in an enzymatic reaction catalyzed by terminal deoxynucleotidyl transferase (TdT). Results were correlated with the presence of wear debris in the tissue and with the use of bone cement for prosthesis fixation. Apoptotic cells were present in a higher percentage in tissue sections where metal particles were present (24% apoptotic cells) if compared to areas where no wear (6%), or plastic wear (2.8%) or ceramic wear (1.5%) was observed. Apoptosis is neither related to bone cement, nor to the time it takes for the implant to fail. Cell death by apoptosis may be important in implants which release metal ions by corrosion or wear and may have been underestimated up to now, as it is a 'clean' way of cell death, leading to limited damage in the surrounding tissues.