Spatial defects nanoengineering for bipolar conductivity in MoS2.

Understanding the atomistic origin of defects in two-dimensional transition metal dichalcogenides, their impact on the electronic properties, and how to control them is critical for future electronics and optoelectronics. Here, we demonstrate the integration of thermochemical scanning probe lithography (tc-SPL) with a flow-through reactive gas cell to achieve nanoscale control of defects in monolayer MoS2. The tc-SPL produced defects can present either p- or n-type doping on demand, depending on the used gasses, allowing the realization of field effect transistors, and p-n junctions with precise sub-µm spatial control, and a rectification ratio of over 104. Doping and defects formation are elucidated by means of X-Ray photoelectron spectroscopy, scanning transmission electron microscopy, and density functional theory. We find that p-type doping in HCl/H2O atmosphere is related to the rearrangement of sulfur atoms, and the formation of protruding covalent S-S bonds on the surface. Alternatively, local heating MoS2 in N2 produces n-character.

Cytochrome c oxidase oxygen reduction reaction induced by cytochrome c on nickel-coordination surfaces based on graphene oxide in suspension.

BACKGROUND: The electrochemical and spectroscopic investigation of bacterial electron-transfer proteins stabilized on solid state electrodes has provided an effective approach for functional respiratory enzyme studies. METHODS: We assess the biocompatibility of carboxylated graphene oxide (CGO) functionalized with Nickel nitrilotriacetic groups (CGO-NiNTA) ccordinating His-tagged cytochrome c oxidase (CcO) from Rhodobacter sphaeroides. RESULTS: Kinetic studies employing UV-visible absorption spectroscopy confirmed that the immobilized CcO oxidized horse-heart cytochrome c (Cyt c) albeit at a slower rate than isolated CcO. The oxygen reduction reaction as catalyzed by immobilized CcO could be clearly distinguished from that arising from CGO-NiNTA in the presence of Cyt c and dithiothreitol (DTT) as a sacrificial reducing agent. Our findings indicate that while the protein content is about 3.7‰ by mass with respect to the support, the contribution to the oxygen consumption activity averaged at 56.3%. CONCLUSIONS: The CGO-based support stabilizes the free enzyme which, while capable of Cyt c oxidation, is unable to carry out oxygen consumption in solution on its own under our conditions. The turnover rate for the immobilized CcO was as high as 240 O2 molecules per second per CcO unit. GENERAL SIGNIFICANCE: In vitro investigations of electron flow on isolated components of bacterial electron-transfer enzymes immobilized on the surface of CGO in suspension are expected to shed new light on microbial bioenergetic functions, that could ultimately contribute toward the improvement of performance in living organisms.

A Key concept in Magnesium Secondary Battery Electrolytes.

A critical roadblock toward practical Mg-based energy storage technologies is the lack of reversible electrolytes that are safe and electrochemically stable. Here, we report on high-performance electrolytes based on 1-ethyl-3-methylimidazolium chloride (EMImCl) doped with AlCl3 and highly amorphous δ-MgCl2 . The phase diagram of the electrolytes reveals the presence of four thermal transitions that strongly depend on salt content. High-level density functional theory (DFT)-based electronic structure calculations substantiate the structural and vibrational assignment of the coordination complexes. A 3D chloride-concatenated dynamic network model accounts for the outstanding redox behaviour and the electric and magnetic properties, providing insight into the conduction mechanism of the electrolytes. Mg anode cells assembled using the electrolytes were cyclically discharged at a high rate (35 mA g(-1) ), exhibiting an initial capacity of 80 mA h g(-1) and a steady-state voltage of 2.3 V.

Functional interfacing of Rhodospirillum rubrum chromatophores to a conducting support for capture and conversion of solar energy.

Owing to the considerable current interest in replacing fossil fuels with solar radiation as a clean, renewable, and secure energy source, light-driven electron transport in natural photosynthetic systems offers a valuable blueprint for conversion of sunlight to useful energy forms. In particular, intracytoplasmic membrane vesicles (chromatophores) from the purple bacterium Rhodospirillum rubrum provide a fully functional and robust photosynthetic apparatus, ideal for biophysical investigations of energy transduction and incorporation into biohybrid photoelectrochemical devices. These vesicular organelles, which arise by invagination of the cytoplasmic membrane, are the sites of the photochemical reaction centers and the light harvesting 1 (LH1) complex. The LH1 protein is responsible for collecting visible and near-IR radiant energy and funneling these excitations to the reaction center for conversion into a transmembrane charge separation. Here, we have investigated the morphology, fluorescence kinetics and photocurrent generation of chromatophores from Rsp. rubrum deposited directly onto gold surfaces in the absence of chemical surface modifications. Atomic force microscopy showed a significant coverage of the gold electrode surface by Rsp. rubrum chromatophores. By in situ fluorescence induction/relaxation measurements, a high retention of the quantum yield of photochemistry was demonstrated in the photoactive films. Chronoamperometric measurements showed that the assembled bioelectrodes were capable of generating sustained photocurrent under white light illumination at 220 mW/cm(2) with a maximum current of 1.5 µA/cm(2), which slowly declines in about 1 week. This study demonstrates the possibility of photoelectrochemical control of robust chromatophore preparations from Rsp. rubrum that paves the way for future incorporation into functional solar cells.

Photoelectron generation by photosystem II core complexes tethered to gold surfaces.

By using a nondestructive, ultrasensitive, fluorescence kinetic technique, we measure in situ the photochemical energy conversion efficiency and electron transfer kinetics on the acceptor side of histidine-tagged photosystem II core complexes tethered to gold surfaces. Atomic force microscopy images coupled with Rutherford backscattering spectroscopy measurements further allow us to assess the quality, number of layers, and surface density of the reaction center films. Based on these measurements, we calculate that the theoretical photoelectronic current density available for an ideal monolayer of core complexes is 43 microA cm(-2) at a photon flux density of 2000 micromol quanta m(-2) s(-1) between 365 and 750 nm. While this current density is approximately two orders of magnitude lower than the best organic photovoltaic cells (for an equivalent area), it provides an indication for future improvement strategies. The efficiency could be improved by increasing the optical cross section, by tuning the electron transfer physics between the core complexes and the metal surface, and by developing a multilayer structure, thereby making biomimetic photoelectron devices for hydrogen generation and chemical sensing more viable.

Investigation of water structure in nafion membranes by infrared spectroscopy and molecular dynamics simulation.

The structure and interactions of water species in hydrated Nafion membranes as a function of water content were investigated on the basis of medium-infrared spectral analysis and molecular dynamics (MD) simulations. The spectral decomposition of the FT-IR data in the stretching OH region was performed on different levels of hydration of the sulfate functional groups (lambdaH2O/RSO3- = 2-22). Quantum mechanical calculations of two model systems [perfluoroethanesulfonic acid/(H2O)6 cluster] and a [perfluorobutanesulfonic acid/(H2O)6 crystal] were carried out in order to account for the band assignments of Nafion in the stretching OH region (2500-4000 cm-1). Our findings indicated that the secondary structure of water species in Nafion can be accurately explained in terms of our reactive force field for water. The distinction between "surface" and "bulk" water contributions in Nafion membrane pores is proposed along with a quantitative estimate of the different types of OH groups present in the system. The average pore size was calculated and supported by the spectral results.

Vibrational studies and properties of hybrid inorganic-organic proton conducting membranes based on Nafion and hafnium oxide nanoparticles.

In this report, we will describe the effect of different concentrations of HfO2 nanopowders on the structure and properties of [Nafion/(HfO2)n] membranes with n = 0, 3, 5, 9, 11, 13, and 15 wt %, respectively. Films were prepared by a solvent casting procedure using HfO2 oxoclusters and Nafion. Seven new homogeneous membranes were obtained with thicknesses ranging from 200 to 350 microm. Each membrane is characterized by a rough HfO2-rich surface and a smooth Nafion-rich surface, with different physical-chemical properties. Membrane characterization was accomplished by means of thermogravimetric analysis (TGA), morphological measurements (environmental scanning electron microscopy) and vibrational spectroscopy (Fourier transform infrared attenuated total reflectance spectroscopy and Fourier transform Raman spectroscopy). These systems can be described in terms of five types of water domains, Nafion-HfO2 species with well-defined stoichiometry surrounded by Nafion and hydrated hafnia. The highest conductivity at 125 degrees C (3.2 x 10-2 S x cm(-1)) was measured on the [Nafion/(HfO2)5] film by electrical spectroscopy, with a stability range of conductivity between 5 and 115 degrees C.