Evidence-Based Treatment Algorithm for Freiberg Disease.

Freiberg disease is a type of osteonecrosis of the metatarsal head that predominantly occurs in young females and adolescents, although it may occur at any age. The pathophysiology is multifactorial and may involve trauma, altered foot biomechanics, systemic disorders, and arterial insufficiency. The most typical location is the second metatarsal head, but Freiberg disease may also occur in other lesser toes. Nonoperative treatment is best applied in the early stage of the disease; if this is ineffective, surgical treatment is recommended. Currently available surgical procedures include debridement, osteotomy, osteochondral grafting, microfracture, interposition arthroplasty, implant arthroplasty, and metatarsal shortening arthroplasty. In this article, we propose a treatment algorithm for Freiberg disease based on the current literature and expert opinion.

Republication of "Proximal Rotational Metatarsal Osteotomy for Hallux Valgus (PROMO): Short-term Prospective Case Series With a Novel Technique and Topic Review".

Background: Hallux valgus deformity consists of a lateral deviation of the great toe, metatarsus varus, and pronation of the first metatarsal. Most osteotomies only correct varus, but not the pronation of the metatarsal. Persistent postoperative pronation has been shown to increase deformity recurrence and have worse functional outcomes. The proximal rotational metatarsal osteotomy (PROMO) technique reliably corrects pronation and varus through a stable osteotomy, avoiding fusing any healthy joints. The objective of this research is to show a prospective series of the PROMO technique. Methods: Twenty-five patients (30 feet) were operated with the PROMO technique. The sample included 22 women and 3 men, average age 46 years (range 22-59), for a mean prospective follow-up of 1 year (range 9-14 months). Inclusion criteria included symptomatic hallux valgus deformities, absence of severe joint arthritis, or inflammatory arthropathies, with a metatarsal malrotation of 10 degrees or more, with no tarsometatarsal subluxation or arthritis on the anteroposterior or lateral foot radiograph views. The mean preoperative and postoperative Lower Extremity Functional Scale (LEFS) score, metatarsophalangeal angle, intermetatarsal angle, metatarsal malrotation, complications, satisfaction, and recurrence were recorded. Results: The mean preoperative and postoperative LEFS scores were 56 and 73. The median pre-/postoperative metatarsophalangeal angle was 32.5/4 degrees and the intermetatarsal angle 15.5/5 degrees. The metatarsal rotation was satisfactorily corrected in 24 of 25 patients. An Akin osteotomy was needed in 27 of 30 feet. All patients were satisfied with the surgery, and no recurrence or complications were found. Conclusions: PROMO is a reliable technique, with good short-term results in terms of angular correction, satisfaction, and recurrence. Long-term studies are needed to determine if a lower hallux recurrence rate occurs with the correction of metatarsal rotation in comparison with conventional osteotomies. Level of evidence: IV, prospective case series.

Acute Deltoid Injury in Ankle Fractures: A Biomechanical Analysis of Different Repair Constructs.

BACKGROUND: The importance of the deltoid ligament in the congruency and coupling of the tibiotalar joint is well known. The current trend is to repair it in cases of acute injuries in the context of ankle fractures; however, there is limited information on how it should be reconstructed. The objective of this study was to compare different deltoid ligament repair types in an ankle fracture cadaveric model. METHODS: Sixteen cadaveric foot-ankle-distal tibia specimens were used. All samples were prepared as a supination external rotation ankle fracture model. Axial load and cyclic axial rotations were applied on every specimen using a specifically designed frame. This test was performed without deltoid injury, with deltoid injury, and after repair. The reconstruction was performed in 4 different ways (anterior, posterior, middle, and combined). Medial clear space (MCS) was measured for each condition on simulated weightbearing (WB) and gravity stress (GS) radiographs. Reflective markers were used in tibia and talus, registering the kinematics through a motion analysis system to record the tibiotalar uncoupling. RESULTS: After deltoid damage, in all cases the MCS increased significantly on GS radiographs, but there was no increase in the MCS on WB radiographs. After repair, in all cases, the MCS was normalized. Kinematically, after deltoid damage, the tibiotalar uncoupling increased significantly. All isolated repairs achieved a similar tibiotalar uncoupling value as its baseline condition. The combined repair resulted in a significant decrease in tibiotalar uncoupling. CONCLUSION: Our results show that deltoid repair recovers the tibiotalar coupling mechanism in an ankle fracture model. Isolated deltoid repairs recovered baseline MCS and tibiotalar uncoupling values. Combined repairs may lead to overconstraint, which could lead to postoperative stiffness. Clinical studies are needed to prove these results and show clinically improved outcomes. CLINICAL RELEVANCE: This study helps in finding the optimum deltoid repair to use in an acute trauma setting.

The double posteromedial portals endoscopy for posterior ankle impingement syndrome in athletes.

BACKGROUND: Posterior ankle impingement syndrome (PAIS) may result from flexor hallucis longus tendinopathy, compression of the posterior process of the talus from the presence of an os trigonum, soft-tissue impingement, or a combination of these. Posterior extra-articular endoscopy performed with the patient supine through the double posteromedial portals, with excision of adhesions, excision of the posterior process of the talus or an os trigonum, and decompression of the tendon of the flexor hallucis longus (FHL), can be used in athletes with PAIS. METHODS: Thirty-four athletes with PAIS in whom conservative management had failed underwent posterior ankle endoscopy in the supine position using the double posteromedial portals. The patients were assessed pre- and postoperatively using the American Orthopaedic Foot and Ankle Society hindfoot scale score, the Tegner scale, and the simple visual analogue scale. Time of surgery, return to sports, patient satisfaction, and complications were recorded and analysed. The average length of postoperative follow-up was 26.7 ± 12.6 (range 24 to 72) months. RESULTS: The mean Tegner activity scale score improved to 9 ± 0.2 postoperatively (p < 0.05), while the mean American Orthopaedic Foot and Ankle Society scale score improved to 96 ± 5.1 (range 87 to 100) postoperatively, with 29 of 34 patients (85.3%) achieving a perfect score of 100 (p < 0.05). The mean time to return to sports was 8.7 ± 0.7 (range 8 to 10) weeks. The complication rate was low, with no superficial wound infections or venous thromboembolism events; only two patients (5.9%) reported pain and tenderness by 3 months after the index procedure. CONCLUSION: Posterior ankle endoscopy for the resection of a posterior process of the talus or an os trigonum and decompression of the tendon of FHL is safe and allows excellent outcomes with low morbidity in athletes with PAIS.

Biomechanical Cadaveric Evaluation of the Role of Medial Column Instability in Hallux Valgus Deformity.

BACKGROUND: Medial column instability is a frequent finding in patients with flatfeet and hallux valgus, within others. The etiology of hallux valgus is multifactorial, and medial ray axial rotation has been mentioned as having an individual role. Our objective was to design a novel cadaveric foot model where we could re-create through progressive medial column ligament damage some components of a hallux valgus deformity. METHODS: Ten fresh-frozen lower leg specimens were used, and fluorescent markers were attached in a multisegment foot model. Constant axial load and cyclic tibial rotation (to simulate foot pronation) were applied, including pull on the flexor hallucis longus tendon (FHL). We first damaged the intercuneiform (C1-C2) ligaments, second the naviculocuneiform (NC) ligaments, and third the first tarsometatarsal ligaments, leaving the plantar ligaments unharmed. Bony axial and coronal alignment was measured after each ligament damage. Statistical analysis was performed. RESULTS: A significant increase in pronation of multiple segments was observed after sectioning the NC ligaments. Damaging the tarsometatarsal ligament generated small supination and varus changes mainly in the medial ray. No significant change was observed in axial or frontal plane alignment after damaging the C1-C2 ligaments. The FHL pull exerted a small valgus change in segments of the first ray. DISCUSSION: In this biomechanical cadaveric model, the naviculocuneiform joint was the most important one responsible for pronation of the medial column. Bone pronation occurs along the whole medial column, not isolated to a certain joint. Flexor hallucis longus pull appears to play some role in frontal plane alignment, but not in bone rotation. This model will be of great help to further study medial column instability as one of the factors influencing medial column pronation and its relevance in pathologies like hallux valgus. CLINICAL RELEVANCE: This cadaveric model suggests a possible influence of medial column instability in first metatarsal pronation. With a thorough understanding of a condition's origin, better treatment strategies can be developed.

Correction of Sagittal Plane Deformity of the Distal Tibia.

Distal tibia sagittal plane deformities are a frequent finding in tibial malunions (antecurvatum or recurvatum) or ankle posttraumatic arthritis (anterior or posterior ankle arthritis). They should be evaluated in all deformities using long leg and tibia radiographs. Measuring the anterior distal tibia angle is necessary to evaluate the deformity severity. To evaluate the magnitude of secondary talar anterior or posterior displacement, the tibial axis to talus ratio and/or the talar lateral process position relative to the tibia axis should be measured. Anterior closing or opening wedge osteotomies are the recommended treatment options for posterior ankle arthritis or anterior ankle arthritis, respectively.

Correlation between indirect radiographic parameters of first metatarsal rotation in hallux valgus and values on weight-bearing computed tomography.

PURPOSE: To verify if indirect radiographic signs of first metatarsal pronation, determined by the head round sign, correspond to weight-bearing computed tomography (WBCT) measurements. METHODS: In this case-control retrospective study, we analyzed 26 hallux valgus (HV) feet and 20 controls through conventional radiograph (CR) and WBCT images. Two blinded orthopaedic foot and ankle surgeons performed the measurements. Pronation classification (head roundness), head diameter (HD), traditional HV angles, arthritis, sesamoid positioning, and first metatarsal rotation angle (MRA) (alpha angle) were evaluated. Comparisons were performed by Student's T-test and a multivariate regression was executed. P-values less than 0.05 were considered significant. RESULTS: Mean values were higher in HV patients than controls when evaluating MRA (11.51 [9.42-13.60] to 4.23 [1.84-6.62], 95%CI), HD (22.35 [21.52-23.18] to 21.01 [20.07-21.96]), and sesamoid rotation angle (SRA) (26.72 [24.09-29.34] to 4.56 [1.63-7.50]). The MRA had a low influence in head roundness classification (R2: 0.15). Changes in the pronation classification were explained chiefly by the sesamoid station (SS) (R2: 0.37), where stations 4 to 7 were found to be strong predictors of roundness classifications 2 and 3. CONCLUSION: Indirect signs of metatarsal pronation, determined by the head round sign, correlate weakly with the alpha angle measured in WBCT. The presence of arthritis and sesamoids displacement might modify the perception of first head roundness. The influence of MRA in the classification was low, where SS from 4 to 7 was strong predictors of a higher pronation classification.

Validity and Reliability of a New Radiological Method to Estimate Medial Column Internal Rotation in Hallux Valgus Using Foot Weight-Bearing X-Ray.

BACKGROUND: Medial column internal rotation in hallux valgus (HV) can be measured using weight-bearing computed tomography (WBCT). Anteroposterior weight-bearing foot radiographs' (WBXR) ability to estimate medial column internal rotation in HV was evaluated comparing these measurements with those obtained from WBCT. METHODS: Three observers evaluated WBCT and WBXR of 33 HV feet twice. Medial column internal rotation was measured with WBCT and classified into 3 levels according to WBXR findings. Intra- and interobserver reliability were obtained for WBXR and WBCT, in addition to WBXR-WBCT correlation. RESULTS: WBXR and WBCT intraobserver agreement was substantial and near perfect, respectively (κ 0.79 and 0.84). Their interobserver agreement was excellent (intraclass correlation 0.85 and 0.9, respectively). The WBXR-WBCT correlation was substantial (κ 0.68). WBXR diagnostic accuracy to predict the WBCT results was 85%. CONCLUSIONS: The proposed method for medial column internal rotation measurement using WBXR is reliable and has a substantial agreement with WBCT measurements. LEVELS OF EVIDENCE: Level III.

Current Concepts in Treatment of Ligament Incompetence in the Acquired Flatfoot.

Flatfoot deformity consists of a loss of medial arch, hindfoot valgus, and forefoot abduction. Historically considered a posterior tendon insufficiency, multiple ligament damage and subsequent incompetence explain the different clinical presentations with varying degrees of deformity. When surgery is deemed necessary, depending on the apex of the deformity, skeletal and soft tissue procedures are considered to keep motion and restore function. Osteotomies are considered at every level where an apex of deformity is found. The recently designated tibiocalcaneonavicular ligament comprises the older superficial and deep deltoid and spring ligaments; its repair or reconstruction should be considered in most flatfoot cases.

Metatarsal Pronation in Hallux Valgus Deformity: A Review.

Hallux valgus deformity is a multiplanar deformity, where the rotational component has been recognized over the past 5 to 10 years and given considerable importance. Years ago, a rounded shape of the lateral edge of the first metatarsal head was identified as an important factor to detect after surgery because a less rounded metatarsal head was associated to less recurrence. More recently, pronation of the metatarsal bone was identified as the cause for the rounded appearance of the metatarsal head, and therefore, supination stress was found to be useful to achieve a better correction of the deformity. Using CT scans, up to 87% of hallux valgus cases have been shown to present with a pronated metatarsal bone, which highlights the multiplanar nature of the deformity. This pronation explained the perceived shape of the metatarsal bone and the malposition of the medial sesamoid bone in radiological studies, which has been associated as one of the most important factors for recurrence after treatment. Treatment options are discussed briefly, including metatarsal osteotomies and tarsometatarsal arthrodesis.

Comparison of Suture-Augmented Ligamentplasty to Transarticular Screws in a Lisfranc Cadaveric Model.

BACKGROUND: Lisfranc injuries represent a spectrum of trauma from high-energy lesions, with significant instability of the midfoot, to low-energy lesions, with subtle subluxations or instability without gross displacement. Recently, treatment options that allow for physiologic fixation of this multiplanar joint are being evaluated. The purpose of this study was to analyze the stability of a cadaveric Lisfranc injury model fixed with a novel suture-augmented neoligamentplasty in comparison with a traditional transarticular screw fixation construct. METHODS: Twenty-four fresh-frozen, matched cadaveric leg and foot specimens (12 individuals younger than 65 years of age) were used for this study. Two different types of Lisfranc ligament injuries were tested: partial and complete. Two different methods of fixation were compared: transarticular screws and augmented suture ligamentplasty with FiberTape. Specimens were fixed to a rotation platform in order to stress the joints while applying 400 N of axial load and internal and external rotation. Six distances were measured and compared between the intact, injured, and fixed states with a 3D Digitizer arm, in order to evaluate the stability between them. Analysis of variance was used with P < .05 considered significant. RESULTS: Using distribution graphs and analyzing the grouped data, it was observed that there was no difference between the 2 stabilization methods, but the augmented suture ligamentplasty presented lower variability and observed distance shortenings were more likely to be around the mean. The variability of the stabilization with screws was 2.9 times higher than that with tape (P < .001). CONCLUSION: We suggest that augmented suture ligamentplasty can achieve similar stability to classic transarticular screws, with less variability. CLINICAL RELEVANCE: This cadaveric study adds new information on the debate about Lisfranc lesions treatment. Flexible fixations, such as the synthethic ligamentplasty used, can restore good stability such as conventional transarticular screws.

Role of Coronal Plane Malalignment in Hallux Valgus Correction.

Coronal malalignment is an important deformity parameter in hallux valgus feet. Approximately 90% of patients with hallux valgus have some degree of metatarsal pronation. In operated hallux valgus, persistent metatarsal pronation is an independent deformity relapse factor. Coronal malalignment can be identified through an anteroposterior (AP) weight-bearing foot radiograph and a weight-bearing forefoot scan. The AP foot view can identify 3 levels of rotation: mild, moderate and severe metatarsal pronation. Regarding the treatment options, some techniques are capable of rotational correction, such as the proximal rotational metatarsal osteotomy, Lapidus, dome osteotomy, and proximal oblique sliding closing wedge.

Biomechanical Evaluation With a Novel Cadaveric Model Using Supination and Pronation Testing of a Lisfranc Ligament Injury.

BACKGROUND: Lisfranc joint injuries can be due to direct or indirect trauma and while the precise mechanisms are unknown, twisting or axial force through the foot is a suspected contributor. Cadaveric models are a useful way to evaluate injury patterns and models of fixation, but a frequent limitation is the amount of joint displacement after injury. The purpose of this study was to test a cadaveric model that includes axial load, foot plantarflexion and pronation-supination motion, which could re-create bone diastasis similar to what is seen in subtle Lisfranc injuries. Our hypothesis was that applying pronation and supination motion to a cadaveric model would produce reliable and measurable bone displacements. METHODS: Twenty-four fresh-frozen lower leg cadaveric specimens were used. The medial (C1) and intermediate (C2) cuneiforms and the first (M1) and second (M2) metatarsal bones were marked. A complete ligament injury was performed between C1-C2 and C1-M2 in 12 specimens (group 1), and between C1-C2, C1-M2, C1-M1, and C2-M2 in 12 matched specimens (group 2). Foot pronation and supination in addition to an axial load of 400 N was applied to the specimens. A 3D digitizer was used to measure bone distances. RESULTS: After ligament injury, distances changed as follows: C1-C2 increased 3 mm (23%) with supination; C1-M2 increased 4 mm (21%) with pronation (no differences between groups). As expected, distances between C1-M1 and C2-M2 only changed in group 2, increasing 3 mm (14%) and 2 mm (16%), respectively (no differences between pronation and supination). M1-M2 and C2-M1 distances did not reach significant difference for any condition. CONCLUSIONS: Pronation or supination in addition to axial load produced measurable bone displacements in a cadaveric model of Lisfranc injury using sectioned ligaments. Distances M1-M2 and C2-M1 were not reliable to detect injury in this model. CLINICAL RELEVANCE: This new cadaveric Lisfranc model included foot pronation-supination in addition to axial load delivering measurable bone diastasis. It was a reliable Lisfranc cadaveric model that could be used to test different Lisfranc reconstructions.

Achilles tendoscopy for non insertional Achilles tendinopathy. A case series study.

BACKGROUND: Achilles non-insertional tendinopathy is usually treated with conservative means. If resistant to a rehabilitation protocol surgical treatment could be proposed. The aim of this research is to report the mid-term clinical results of endoscopic assisted surgery for patients suffering from recalcitrant painful non-insertional Achilles tendinopathy. METHODS: A consecutive series of 11 patients (6 men and 5 women), median age of 54 (range 40-67) years, with chronic recalcitrant painful non-insertional Achilles tendinopathy were included. All patients completed at least 20 physical therapy sessions and 6 months of no sports activities before surgery. All underwent Achilles tendoscopy, without tendon excision or transfer with a median follow-up of 87 (27-105) months. We report the preoperative symptoms duration, treatment before surgery, complications and satisfaction after surgery, return to previous sport level, and postoperative VISA-A score. RESULTS: Mean preoperative symptoms duration was 1 year, having all performed at least 20 physical therapy sessions. No postoperative complications were reported, achieving a complete satisfaction in 10 of 11 patients. All patients returned to their preoperative sports level with a median postoperative VISA-A functional score of 100 (30-100) points. CONCLUSIONS: The mid-term results of Achilles tendoscopy in patients with chronic painful non-insertional Achilles tendinopathy are satisfactory with a rapid rehabilitation. This procedure is safe and has a low complication rate. LEVEL OF EVIDENCE: IV. Retrospective case series.

Proximal and Distal Failure Site Analysis in Percutaneous Achilles Tendon Rupture Repair.

BACKGROUND: Different techniques have been described for percutaneous Achilles tendon rupture repair, but no biomechanical evaluation has been performed separately for proximal and distal suturing techniques. The purpose of this study was to biomechanically analyze proximal versus distal percutaneous Achilles suture configurations during cyclic loading and load to failure. METHODS: A simulated, midsubstance rupture was created 6 cm proximal to the calcaneal insertion in fresh-frozen cadaveric Achilles tendons. Fifteen proximal specimens were divided into 3 groups: (A1) triple locking technique, (A2) Bunnell-type technique, and (A3) double Bunnell-type technique. Twelve distal specimens were divided into 2 groups: (B1) triple nonlocking technique and (B2) oblique technique. Repairs were subjected to cyclic testing and load to failure. Load to failure, cause of failure, and tendon elongation were evaluated. RESULTS: None of the proximal specimens and 7/12 of the distal ones failed in cyclic testing. The proximal fixation groups demonstrated significantly more strength than the distal groups (P = .001), achieving up to 710 N of failure load in Group A3. Groups B1and B2 failed on average at 380 N with no difference between them (P > .05). The majority of all repairs failed in the suture-tendon interface. Distal groups had more elongation during cyclic testing (13.7 mm) than proximal groups (9.4 mm) (P = .02). CONCLUSION: The distal fixation site in this Achilles tendon repair was significantly weaker than the proximal fixation site. A proximal modified suture configuration increased resistance to cyclic loading and load to failure significantly. CLINICAL RELEVANCE: A modification can be suggested to improve strength of the Achilles repair.

Mini-Open Achilles Tendon Rupture Repair.

BACKGROUND: We present a mini-open Achilles tendon rupture repair technique, which does not open the paratenon and avoids the sural nerve. We perform it to recover the normal working length of the gastrocnemius-soleus complex musculotendinous unit as well as possible, trying to avoid soft-tissue complications. DESCRIPTION: This repair is performed via a 3-cm-long incision that is placed 4 cm proximal to the Achilles tendon gap. Through this incision, the interval between the superficial fascia of the leg and the paratenon is developed. Distally, 2 small incisions are made in order to introduce into the calcaneus 2 bone anchors loaded with nonabsorbable sutures. These sutures are retrieved from the distal attachment site through the interval between the fascia and the paratenon with specifically designed suture passers, and obtained through the proximal incision. The sutures are then woven through the proximal stump of the Achilles tendon, the first ones in a Bunnell and the last ones in a crisscross manner, recovering the physiological equinus of the ankle1. The fascia and skin are closed appropriately. ALTERNATIVES: Percutaneous surgical repair techniques.Open surgical repair techniques.Orthopaedic nonoperative treatment. RATIONALE: This surgical technique differs from other available mini-open techniques in that it respects the rupture hematoma, accessing the tendon far from the rupture site; it does not violate the paratenon; and because of the placement in a safe anatomical interval, it does not injure the sural nerve. Because of the mini-open approach of the technique, soft-tissue complications are rare, and thus indications for this technique can be expanded over those of open surgical techniques. EXPECTED OUTCOMES: Patients can expect a nearly complete recovery of gastrocnemius-soleus function, after an appropriate rehabilitation period. Soft-tissue complications are rare, and therefore early rehabilitation can be performed. The rehabilitation lasts for 5 months to achieve a high level of physical function. A low rerupture rate (2%) can also be expected2. The average return to work is 56 days. IMPORTANT TIPS: Try to operate within 10 days of the rupture to avoid scar formation at the rupture site.Plan the surgical procedure according to the level of the rupture in order to ensure the suture passers are long enough to span the rupture site from the proximal incision up to the calcaneus.Ensure the bone anchors are placed in the middle of the total height of the calcaneus, avoiding the enthesis, and align the anchors to be perpendicular to the axis of the calcaneus.Follow the proximal suturing technique in order to obtain the best resistance of the repair. Taking care not to overtighten consecutive sutures, restore the appropriate level of physiological equinus.

The Use of a Triplanar Metatarsal Rotational Osteotomy to Correct Hallux Valgus Deformities.

Proximal rotational metatarsal osteotomy (PROMO) is a technique that allows the surgeon to correct the varus and pronation of the first metatarsal that is observed in most patients with hallux valgus deformity. Persistent metatarsal pronation is a recognized recurrence factor for operatively treated hallux valgus. The indication for this technique is a mild-moderate hallux valgus deformity (i.e., intermetatarsal angle <18° and hallux valgus angle <40°) in which pronation is present. (Note that according to the literature, 10% to 20% of patients do not have pronation.) The PROMO is performed via a single proximal oblique metatarsal incision. Following completion of the osteotomy, the distal metatarsal segment is supinated (external rotation), correcting pronation and varus deviation, which is achieved as a result of the oblique nature of the osteotomy (i.e., rotation through an oblique plane). Step 1: Preoperative planning: measure the intermetatarsal angle and the metatarsal rotation. For the latter, use the published classification (mild, moderate, severe). With both values, use the table included in the PROMO tray to know which osteotomy angulation should be used. Step 2: medial foot incision. Step 3: drive the guidewire 1 cm distal to the tarsometatarsal joint. Step 4: Under fluoroscopy, ensure that the wire is parallel to the sole of the foot and perpendicular to the metatarsal. Step 5: use the positioning jig to drive a Kirschner wire with the chosen pronation correction. Step 6: slide the osteotomy jig with the previously chosen osteotomy angulation. Step 7: perform the osteotomy. Step 8: use the rotation jig with the desired pronation correction. Step 9: derotate and correct the metatarsal deformity, leaving both wires parallel to each other. Step 10: perform osteotomy transient fixation with 2 Kirschner wires. Step 11: apply a medial locking plate and an interfragmentary screw at the osteotomy site. The expected outcome is complete correction of the first metatarsal varus and pronation.

Incidence of and Functional Significance of Floating Toe After Weil Osteotomy.

BACKGROUND: The most frequent complication after Weil osteotomies is a floating toe deformity, but there are no reports about its effect on the patient. In this study, we analyzed the consequences of floating toe deformities after the performance of a modified Weil osteotomy (MWO) or a modified Weil osteotomy with interphalangeal fixation (MWOIF). METHODS: We performed a retrospective review with a prospective follow-up of 50 patients (98% women, 120 rays) who underwent MWO (65 rays) or MWOIF (55 rays), with a mean age of 54 ± 12 years and a minimum follow-up of 4 years (mean of 6 years). We analyzed the presence of floating toe deformity in MWO and MWOIF and the outcomes measured by the subjective satisfaction, Lower Extremity Functional Scale (LEFS), American Orthopaedic Foot & Ankle Society (AOFAS) ankle-hindfoot score, and quality of prehension force between patients with or without floating toe deformity. RESULTS: The mean floating toe incidence was of 57%, with no significant difference between operative techniques (48% MWO, 67% MWOIF; P = .053). Our analysis did not show differences in satisfaction, LEFS and AOFAS scores, or grip strength between the group of patients with or without floating toes. CONCLUSION: The presence of a floating toe deformity was more frequent than generally believed but did not have a meaningful impact on the patient's satisfaction or functional outcomes measured by the AOFAS and LEFS scales. There was no clear correlation between operative technique, floating toe, and quality of prehension force. LEVEL OF EVIDENCE: Level III, retrospective comparative series.

AOFAS Position Statement Regarding Patient-Reported Outcome Measures.

Outcome measures evaluate various aspects of patient health, and when appropriately utilized can provide valuable information in both clinical practice and research settings. The orthopedic community has placed increasing emphasis on patient-reported outcome measures, recognizing their value for understanding patients' perspectives of treatment outcomes. Patient-reported outcomes are information directly reported by patients regarding their perceptions of health, quality of life, or functional status without interpretation by healthcare providers. The American Orthopaedic Foot & Ankle Society (AOFAS) supports the use of validated patient-reported outcome (PRO) instruments to assess patient general health, functional status, and outcomes of treatment. It is not possible to recommend a single instrument to collect quality orthopedic data as the selection is dependent on the population being examined and the question being asked. We support the use of the PROMIS Physical Function Computerized Adaptive Test (PF CAT) or Lower Extremity Computerized Adaptive Test (LE CAT), which can be assessed with other domains such as Pain Interference. In addition, a disease-specific measure can be used when available.