Investigation into the use of gamma irradiated Cytodex-1 microcarriers to produce a human cytomegalovirus (HCMV) vaccine candidate in epithelial cells.

V160 is a viral vaccine candidate against human cytomegalovirus (HCMV) that is manufactured using Adult Retinal Pigment Epithelial cells (ARPE-19) grown on Cytodex-1 microcarriers. The microcarriers are generally hydrated, washed, and autoclaved prior to use, which can be limiting at large production scales. To minimize microcarrier preparation and sterilization, the use of gamma irradiated Cytodex-1 was investigated. Similar ARPE-19 cell growth was observed on heat-sterilized and gamma irradiated Cytodex-1; however, significantly reduced virus production was observed in cultures exposed to gamma irradiated Cytodex-1. Additional experiments suggest that infection inhibition is not exclusive to ARPE-19 but is most directly linked to HCMV V160, as evidenced by similar inhibition of V160 with Vero cells and no inhibition of Measles virus with either cell type. These observations suggest a putative impact on HCMV infection from the presence of extractable(s)/leachable(s) in the gamma irradiated microcarriers. Thorough aseptic rinsing of gamma irradiated Cytodex-1 prior to use can mitigate this impact and enable comparable process performance to heat-sterilized Cytodex-1. Though not fully a "ready-to-use" product for the HCMV V160 production process, utilization of Cytodex-1 microcarriers was possible without requiring heat sterilization, suggesting a potential path forward for large scale production of V160.

Key Attributes of a Medical Learning Community Mentor at One Medical School: The Mentee Perspective.

To assess the elements necessary to be a successful learning community (ClinCalc) mentor to medical students from the mentee's perspective. Few such studies have utilized the in-depth and richness of detail obtained in qualitative studies. This qualitative study analyzed four focus group discussions lasting 45-90 min conducted at the University of Texas Southwestern Medical School, which has an established LC, in the year 2018. The groups included 14 pre-clerkship and 8 clerkship students. Investigators evaluated transcriptions of the focus group discussions using ATLAS.ti software. Three overarching categories of discussion emerged from the group discussions: (1) Relationship Competence, (2) Teaching Competence, and (3) Ethical and Compassionate Medical Practice Competence. Relationship Competence themes included "walk with me," relationship is most important, and one-on-one. Teaching Competence themes included above and beyond, recognize and address mentor limitations, and safe and enriching environment. Ethical and Compassionate Medical Practice Competence themes included ethical decision making and compassionate care for diverse patient populations. Mentees focused on various aspects of the mentor-mentee relationship as the single most essential competence. Themes mentees discussed as important qualities of a successful mentor may denote qualities to be prioritized in faculty development and mentor recruitment. Future studies could investigate how the LC environment informs former medical students and promotes patient outcomes.

Rapid In-Process Measurement of Live Virus Vaccine Potency Using Laser Force Cytology: Paving the Way for Rapid Vaccine Development.

Vaccinations to prevent infectious diseases are given to target the body's innate and adaptive immune systems. In most cases, the potency of a live virus vaccine (LVV) is the most critical measurement of efficacy, though in some cases the quantity of surface antigen on the virus is an equally critical quality attribute. Existing methods to measure the potency of viruses include plaque and TCID50 assays, both of which have very long lead times and cannot provide real time information on the quality of the vaccine during large-scale manufacturing. Here, we report the evaluation of LumaCyte's Radiance Laser Force Cytology platform as a new way to measure the potency of LVVs in upstream biomanufacturing process in real time and compare this to traditional TCID50 potency. We also assess this new platform as a way to detect adventitious agents, which is a regulatory expectation for the release of commercial vaccines. In both applications, we report the ability to obtain expedited and relevant potency information with strong correlation to release potency methods. Together, our data propose the application of Laser Force Cytology as a valuable process analytical technology (PAT) for the timely measurement of critical quality attributes of LVVs.

Sorting for secreted molecule production using a biosensor-in-microdroplet approach.

Sorting large libraries of cells for improved small molecule secretion is throughput limited. Here, we combine producer/secretor cell libraries with whole-cell biosensors using a microfluidic-based screening workflow. This approach enables a mix-and-match capability using off-the-shelf biosensors through either coencapsulation or pico-injection. We demonstrate the cell type and library agnostic nature of this workflow by utilizing single-guide RNA, transposon, and ethyl-methyl sulfonate mutagenesis libraries across three distinct microbes (Escherichia coli, Saccharomyces cerevisiae, and Yarrowia lipolytica), biosensors from two organisms (E. coli and S. cerevisiae), and three products (triacetic acid lactone, naringenin, and L-DOPA) to identify targets improving production/secretion.

Genome Engineering of Yarrowia lipolytica with the PiggyBac Transposon System.

A mutant excision+/integration- piggyBac transposase can be used to seamlessly excise a chromosomally integrated, piggyBac-compatible selection marker cassette from the Yarrowia lipolytica genome. This piggyBac transposase-based genome engineering process allows for both positive selection of targeted homologous recombination events and scarless or footprint-free genome modifications after precise marker recovery. Residual non-native sequences left in the genome after marker excision can be minimized (0-4 nucleotides) or customized (user-defined except for a TTAA tetranucleotide). Both of these options reduce the risk of unintended homologous recombination events in strains with multiple genomic edits. A suite of dual positive/negative selection marker pairs flanked by piggyBac inverted terminal repeats (ITRs) have been constructed and are available for precise genome engineering in Y. lipolytica using this method. This protocol specifically describes the split marker homologous recombination-based disruption of Y. lipolytica ADE2 with a piggyBac ITR-flanked URA3 cassette, followed by piggyBac transposase-mediated excision of the URA3 marker to leave a 50 nucleotide synthetic barcode at the ADE2 locus. The resulting ade2 strain is auxotrophic for adenine, which enables the use of ADE2 as a selectable marker for further strain engineering.

Design, Evolution, and Characterization of a Xylose Biosensor in Escherichia coli Using the XylR/xylO System with an Expanded Operating Range.

Genetically encoded biosensors are extensively utilized in synthetic biology and metabolic engineering. However, reported xylose biosensors are far too sensitive with a limited operating range to be useful for most sensing applications. In this study, we describe directed evolution of Escherichia coli XylR, and construction of biosensors based on XylR and the corresponding operator xylO. The operating range of biosensors containing the mutant XylR was increased by nearly 10-fold comparing with the control. Two individual amino acid mutations (either L73P or N220T) in XylR were sufficient to extend the linear response range to upward of 10 g/L xylose. The evolved biosensors described here are well suited for developing whole-cell biosensors for detecting varying xylose concentrations across an expanded range. As an alternative use of this system, we also demonstrate the utility of XylR and xylO as a xylose inducible system to enable graded gene expression through testing with ß-galactosidase gene and the lycopene synthetic pathway. This evolution strategy identified a less-sensitive biosensor for real applications, thus providing new insights into strategies for expanding operating ranges of other biosensors for synthetic biology applications.

The learning community faculty experience: how longitudinal relationships with learners enhance work meaning.

INTRODUCTION: Work meaning has gained attention as an important contributor to physician job engagement and well-being but little is known about how faculty participation in medical school learning communities might influence this phenomena. Our study goals were to determine how physician faculty members may derive meaning from serving as mentors for longitudinal learning communities of medical students, to understand how that meaning may impact other areas of their work, and relate our findings to existing literature and theoretical frameworks. METHODS: The research team conducted, recorded, transcribed, and coded 25 semi-structured telephone interviews of faculty mentors from four US medical schools with curricular learning communities. The team used an iterative interview coding process to generate final themes and relate these themes to existing literature. RESULTS: The authors identified five themes of meaning faculty derive from participation as learning community mentors: "I am a better professional," "I am more connected," "I am rejuvenated," "I am contributing," and "I am honored." A sixth theme, "I am harmed," encompassed the negative aspects of the learning community faculty experience. The authors found that their identified themes related closely to the theoretical framework for pathways to meaningful work proposed by Rosso et al. DISCUSSION: The alignment of the themes we identified on the experience of learning community faculty to existing literature on work meaning corroborates the theoretical framework and deepens understanding of beneficial and harmful learning community effects on faculty. As learning communities become increasingly common within medical schools, this understanding may be important for leaders in academic medicine considering potential indirect benefits of this educational model.

Compartmentalized microbes and co-cultures in hydrogels for on-demand bioproduction and preservation.

Most mono- and co-culture bioprocess applications rely on large-scale suspension fermentation technologies that are not easily portable, reusable, or suitable for on-demand production. Here, we describe a hydrogel system for harnessing the bioactivity of embedded microbes for on-demand small molecule and peptide production in microbial mono-culture and consortia. This platform bypasses the challenges of engineering a multi-organism consortia by utilizing a temperature-responsive, shear-thinning hydrogel to compartmentalize organisms into polymeric hydrogels that control the final consortium composition and dynamics without the need for synthetic control of mutualism. We demonstrate that these hydrogels provide protection from preservation techniques (including lyophilization) and can sustain metabolic function for over 1 year of repeated use. This approach was utilized for the production of four chemical compounds, a peptide antibiotic, and carbohydrate catabolism by using either mono-cultures or co-cultures. The printed microbe-laden hydrogel constructs' efficiency in repeated production phases, both pre- and post-preservation, outperforms liquid culture.

Assessing quality and resources during campus-wide simulation integration.

INTRODUCTION: Our simulation center, supported by four departments (Surgery, OB/GYN, Urology, and Anesthesiology), is accredited as a comprehensive Accredited Educational Institute (AEI) and is now expanding to accommodate all departments on campus. METHODS: A 61-point questionnaire was administered to 44 stakeholders, representing all of UME and GME. Data were compared for AEI vs. non-AEI activities. RESULTS: Responses were collected from all 44 groups (100% response rate). Overall, 43 simulation activities were hosted within the AEI and 40 were hosted by non-AEI stakeholders. AEI activities were more likely to be mandatory (93% vs. 75%, p = 0.02), have written learning objectives (79% vs 43%, p < 0.001), and use validated assessment metrics (33% vs. 13%, p = 0.03). CONCLUSION: These data suggest that the AEI courses are more robust in terms of structured learning and assessment compared to non-AEI courses. Campus-wide application of uniform quality standards is anticipated to require significant faculty, course, and program development.

Improving ionic liquid tolerance in Saccharomyces cerevisiae through heterologous expression and directed evolution of an ILT1 homolog from Yarrowia lipolytica.

Ionic liquids show promise for deconstruction of lignocellulosic biomass prior to fermentation. Yet, imidazolium ionic liquids (IILs) can be toxic to microbes even at concentrations present after recovery. Here, we show that dominant overexpression of an Ilt1p homolog (encoded by YlILT1/YALI0C04884) from the IIL-tolerant yeast Yarrowia lipolytica confers an improvement in 1-ethyl-3-methylimidazolium acetate tolerance in Saccharomyces cerevisiae compared to the endogenous Ilt1p (ScILT1/YDR090C). We subsequently enhance tolerance in S. cerevisiae through directed evolution of YlILT1 using growth-based selection, leading to identification of mutants that grow in up to 3.5% v/v ionic liquid. Lastly, we demonstrate that strains expressing YlILT1 variants demonstrate improved growth rate and ethanol production in the presence of residual IIL. This shows that dominant overexpression of a heterologous protein (wild type or evolved) from an IIL-tolerant yeast can increase tolerance in S. cerevisiae at concentrations relevant to bioethanol production from IIL-treated biomass.

Validating genome-wide CRISPR-Cas9 function improves screening in the oleaginous yeast Yarrowia lipolytica.

Genome-wide mutational screens are central to understanding the genetic underpinnings of evolved and engineered phenotypes. The widespread adoption of CRISPR-Cas9 genome editing has enabled such screens in many organisms, but identifying functional sgRNAs still remains a challenge. Here, we developed a methodology to quantify the cutting efficiency of each sgRNA in a genome-scale library, and in doing so improve screens in the biotechnologically important yeast Yarrowia lipolytica. Screening in the presence and absence of native DNA repair enabled high-throughput quantification of sgRNA function leading to the identification of high efficiency sgRNAs that cover 94% of genes. Library validation enhanced the classification of essential genes by identifying inactive guides that create false negatives and mask the effects of successful disruptions. Quantification of guide effectiveness also creates a dataset from which determinants of CRISPR-Cas9 can be identified. Finally, application of the library identified novel mutations for metabolic engineering of high lipid accumulation.

Design and Evaluation of Synthetic Terminators for Regulating Mammalian Cell Transgene Expression.

Tuning heterologous gene expression in mammalian production hosts has predominantly relied upon engineering the promoter elements driving the transcription of the transgene. Moreover, most regulatory elements have borrowed genetic sequences from viral elements. Here, we generate a set of 10 rational and 30 synthetic terminators derived from nonviral elements and evaluate them in the HT1080 and HEK293 cell lines to demonstrate that they are comparable in terms of tuning gene expression/protein output to the viral SV40 element and often require less sequence footprint. The mode of action of these terminators is determined to be an increase in mRNA half-life. Furthermore, we demonstrate that constructs comprising completely nonviral regulatory elements ( i.e., promoters and terminators) can outperform commonly used, strong viral based elements by nearly 2-fold. Ultimately, this novel set of terminators expanded our genetic toolkit for engineering mammalian host cells.

A Team Disclosure of Error Educational Activity: Objective Outcomes.

Medical errors can involve multiple team members. Few curricula are being developed to provide instruction on disclosing medical errors that include simulation training with interprofessional team disclosure. To explore more objective evidence for the value of an educational activity on team disclosure of errors, faculty developed and assessed the effectiveness of a multimodal educational activity for learning team-based disclosure of a medical error. This study employed a methodological triangulation research design. Participants (N = 458) included students enrolled in academic programs at three separate institutions. The activity allowed students to practice team communication while: (1) discussing a medical error within the team; (2) planning for the disclosure of the error; and (3) conducting the disclosure. Faculty assessed individual student's change in knowledge and, using a rubric, rated the performance of the student teams during a simulation with a standardized family member (SFM). Students had a high level of preexisting knowledge and demonstrated the greatest knowledge gains in questions regarding the approach to disclosure (P < .001) and timing of an apology (P < .001). Both SFMs and individual students rated the team error disclosure behavior highly (rho = 0.54; P < .001). Most participants (more than 80%) felt the activity was worth their time and that they were more comfortable with disclosing a medical error as a result of having completed the activity. This activity for interprofessional simulation of team-based disclosure of a medical error was effective for teaching students about and how to perform this type of important disclosure.

Key Attributes of a Medical Learning Community Mentor at One Medical School.

PURPOSE: The purpose of this study was to discover the elements required for a successful learning community (LC) faculty member educator of medical students. METHOD: The authors in this qualitative study evaluated six 90-min focus groups of faculty members. The groups included 31 experienced and 19 inexperienced LC faculty members at the University of Texas Southwestern Medical School. After achieving excellent interrater reliability, transcriptions of the discussions were subjected to thematic analysis using ATLAS.ti software. RESULTS: Five major themes emerged: (1) LC faculty characteristics/competency, (2) suggested faculty development methods, (3) factors outside the LC environment influencing student relationships, (4) student attributes influencing teaching techniques, and (5) measuring and improving history and physical skills. Faculty characteristics/competency subthemes included role-modeling, mentoring, and teaching competence. Suggested faculty development methods subthemes included assessing and giving feedback to faculty, peer development, and learning from experts. Experienced LC faculty focused more attention on teaching competence and mentoring competence than inexperienced LC faculty. DISCUSSION: The themes with the most extensive discussion among the experienced LC faculty groups may represent qualities to be sought in future mentor recruitment and faculty development. Future studies could build on this study by similarly investigating student perceptions.

Spectroscopic analysis of chlamydial major outer membrane protein in support of structure elucidation.

Chlamydial major outer membrane protein (MOMP) is the major protein constituent of the bacterial pathogen Chlamydia trachomatis. Chlamydia trachomatis Serovars D-K are the leading cause of genital tract infections which can lead to infertility or ectopic pregnancies. A vaccine against Chlamydia is highly desirable but currently not available. MOMP accounts for ~ 60% of the chlamydial protein mass and is considered to be one of the lead vaccine candidates against C. trachomatis. We report on the spectroscopic analysis of C. trachomatis native MOMP Serovars D, E, F, and J as well as C. muridarum MOMP by size exclusion chromatography multi angle light scattering (SEC MALS), circular dichroism (CD) and attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR). MOMP was purified from the native bacterium grown in either adherent HeLa cells or in different suspension cell lines. Our results confirm that MOMP forms homo-trimers in detergent micelles. The secondary structure composition of C. trachomatis MOMP was conserved across serovars, but different from composition of C. muridarum MOMP with a 13% (CD) to 18% (ATR-FTIR) reduction in ß-sheet conformation for C. trachomatis MOMP. When Serovar E MOMP was isolated from suspension cell lines the α-helix content increased by 7% (CD) to 13% (ATIR-FTIR). Maintenance of a native-like tertiary and quaternary structure in subunit vaccines is important for the generation of protective antibodies. This biophysical characterization of MOMP presented here serves, in the absence of functional assays, as a method for monitoring the structural integrity of MOMP.

A comparative analysis of single cell and droplet-based FACS for improving production phenotypes: Riboflavin overproduction in Yarrowia lipolytica.

Evolutionary approaches to strain engineering inherently require the identification of suitable selection techniques for the product and phenotype of interest. In this work, we undertake a comparative analysis of two related but functionally distinct methods of high-throughput screening: traditional single cell fluorescence activated cell sorting (single cell FACS) and microdroplet-enabled FACS (droplet FACS) using water/oil/water (w/o/w) emulsions. To do so, we first engineer and evolve the non-conventional yeast Yarrowia lipolytica for high extracellular production of riboflavin (vitamin B2), an innately fluorescent product. Following mutagenesis and adaptive evolution, a direct parity-matched comparison of these two selection strategies was conducted. Both single cell FACS and droplet FACS led to significant increases in total riboflavin titer (32 and 54 fold relative to the parental PO1f strain, respectively). However, single cell FACS favored intracellular riboflavin accumulation (with only 70% of total riboflavin secreted) compared with droplet FACS that favored extracellular product accumulation (with 90% of total riboflavin secreted). We find that for the test case of riboflavin, the extent of secretion and total production were highly correlated. The resulting differences in production modes and levels clearly demonstrate the significant impact that selection approaches can exert on final evolutionary outcomes in strain engineering. Moreover, we note that these results provide a cautionary tale when intracellular read-outs of product concentration (including signals from biosensors) are used as surrogates for total production of potentially secreted products. In this regard, these results demonstrate that extracellular production is best assayed through an encapsulation technique when performing high throughput screening.

Developing a piggyBac Transposon System and Compatible Selection Markers for Insertional Mutagenesis and Genome Engineering in Yarrowia lipolytica.

Yarrowia lipolytica is a non-conventional yeast of interest to the biotechnology industry. However, the physiology, metabolism, and genetic regulation of Y. lipolytica diverge significantly from more well-studied and characterized yeasts such as Saccharomyces cerevisiae. To develop additional genetic tools for this industrially relevant host, the piggyBac transposon system to enable efficient generation of genome-wide insertional mutagenesis libraries and introduction of scarless, footprint-free genomic modifications in Y. lipolytica. Specifically, we demonstrate piggyBac transposition in Y. lipolytica, and then use the approach to screen transposon insertion libraries for rapid isolation of mutations that confer altered canavanine resistance, pigment formation, and neutral lipid accumulation. We also develop a variety of piggyBac compatible selection markers for footprint-free genome engineering, including a novel dominant marker cassette (Escherichia coli guaB) for effective Y. lipolytica selection using mycophenolic acid. We utilize these marker cassettes to construct a piggyBac vector set that allows for auxotrophic selection (uracil or tryptophan biosynthesis) or dominant selection (hygromycin, nourseothricin, chlorimuron ethyl, or mycophenolic acid resistance) and subsequent marker excision. These new genetic tools and techniques will help to facilitate and accelerate the engineering of Y. lipolytica strains for efficient and sustainable production of a wide variety of small molecules and proteins.

T7 Polymerase Expression of Guide RNAs in vivo Allows Exportable CRISPR-Cas9 Editing in Multiple Yeast Hosts.

Efficient guide RNA expression often limits CRISPR-Cas9 implementation in new hosts. To address this limitation in fungal systems, we demonstrate the utility of a T7 polymerase system to effectively express sgRNAs. Initially, we developed a methodology in Saccharomyces cerevisiae using a modified version of the T7 P266L mutant polymerase with an SV40 nuclear localization signal to allow guide RNA expression immediately downstream of a T7 promoter. To improve targeting efficiency, guide RNA design was found to be tolerant to three mismatches or up to three additional bases appended to the 5' end. The addition of three guanines to a T7-based guide RNA improved guide RNA expression 80-fold and achieved transcriptional output similar to the strong Pol III snr52 promoter. Resulting gene editing and dCas9-guided gene regulation with a T7-based guide RNA was on par with the commonly used snr52 system in S. cerevisiae. Finally, 96% and 60% genome editing efficiencies were achieved in Kluyveromyces lactis and Yarrowia lipolytica respectively with minimal optimization of this system. Thus, T7-based expression of sgRNAs offers an orthogonal method for implementing CRISPR systems in fungal systems.

Rewiring Yarrowia lipolytica toward triacetic acid lactone for materials generation.

Polyketides represent an extremely diverse class of secondary metabolites often explored for their bioactive traits. These molecules are also attractive building blocks for chemical catalysis and polymerization. However, the use of polyketides in larger scale chemistry applications is stymied by limited titers and yields from both microbial and chemical production. Here, we demonstrate that an oleaginous organism (specifically, Yarrowia lipolytica) can overcome such production limitations owing to a natural propensity for high flux through acetyl-CoA. By exploring three distinct metabolic engineering strategies for acetyl-CoA precursor formation, we demonstrate that a previously uncharacterized pyruvate bypass pathway supports increased production of the polyketide triacetic acid lactone (TAL). Ultimately, we establish a strain capable of producing over 35% of the theoretical conversion yield to TAL in an unoptimized tube culture. This strain also obtained an averaged maximum titer of 35.9 ± 3.9 g/L with an achieved maximum specific productivity of 0.21 ± 0.03 g/L/h in bioreactor fermentation. Additionally, we illustrate that a ß-oxidation-related overexpression (PEX10) can support high TAL production and is capable of achieving over 43% of the theoretical conversion yield under nitrogen starvation in a test tube. Next, through use of this bioproduct, we demonstrate the utility of polyketides like TAL to modify commodity materials such as poly(epichlorohydrin), resulting in an increased molecular weight and shift in glass transition temperature. Collectively, these findings establish an engineering strategy enabling unprecedented production from a type III polyketide synthase as well as establish a route through O-functionalization for converting polyketides into new materials.

Yeast Terminator Function Can Be Modulated and Designed on the Basis of Predictions of Nucleosome Occupancy.

The design of improved synthetic parts is a major goal of synthetic biology. Mechanistically, nucleosome occupancy in the 3' terminator region of a gene has been found to correlate with transcriptional expression. Here, we seek to establish a predictive relationship between terminator function and predicted nucleosome positioning to design synthetic terminators in the yeast Saccharomyces cerevisiae. In doing so, terminators improved net protein output from these expression cassettes nearly 4-fold over their original sequence with observed increases in termination efficiency to 96%. The resulting terminators were indeed depleted of nucleosomes on the basis of mapping experiments. This approach was successfully applied to synthetic, de novo, and native terminators. The mode of action of these modifications was mainly through increased termination efficiency, rather than half-life increases, perhaps suggesting a role in improved mRNA maturation. Collectively, these results suggest that predicted nucleosome depletion can be used as a heuristic approach for improving terminator function, though the underlying mechanism remains to be shown.