Penicillium poederi and P. tirolense, two new species of section Torulomyces.

Here we describe two new species of the genus Penicillium section Torulomyces with solitary phialides. Penicillium poederi sp. nov. was isolated from volcanic soils in Iceland. Penicillium tirolense sp. nov. was isolated from a sporocarp of Serpula lacrymans. Both species are characterised by slow growth rates and the production of a brown soluble pigment on CYA, conidiophores with solitary ampulliform phialides with smooth-walled stipes and warty, globose conidia and with connectives without visible rings. The spores of. P. poederi are 2.5 µm diam, while the spores of P. tirolense are 2.0 µm diam. In a multigene phylogeny based on the ITS, BenA, CaM and RPB2 gene regions P. tubakianum and P. wollemiicola are the closest relatives of P. poederi. This species differs from P. tubakianum and P. wollemiicola by its growth rates and by its pigmentation. The holotype of P. poederi is IB2017/0007, while SF014017 (CBS 147622) is a culture derived from the holotype. The closest relatives of P. tirolense are P. austricola and P. riverlandense. It differs from P. austricola by lower growth rates on all tested media and temperatures and by its larger spores. It differs from P. riverlandense by lower growth rates and the absence of growth at 37 °C. The holotype of P. tirolense is IBF2019/0162, while SF015108 (CBS 147625) is a culture derived from the holotype. Citation: Kirchmair M, Embacher J, Heimdörfer D, Walch G, Neuhauser S (2022). Penicillium poederi and Penicillium tirolense, two new species of section Torulomyces. Fungal Systematics and Evolution 10: 91-101. doi: 10.3114/fuse.2022.10.03.

Glenoid loosening and migration in reverse shoulder arthroplasty.

AIMS: The aim of this study was to report the outcomes of different treatment options for glenoid loosening following reverse shoulder arthroplasty (RSA) at a minimum follow-up of two years. PATIENTS AND METHODS: We retrospectively studied the records of 79 patients (19 men, 60 women; 84 shoulders) aged 70.4 years (21 to 87) treated for aseptic loosening of the glenosphere following RSA. Clinical evaluation included pre- and post-treatment active anterior elevation (AAE), external rotation, and Constant score. RESULTS: From the original cohort, 29 shoulders (35%) were treated conservatively, 27 shoulders (32%) were revised by revision of the glenosphere, and 28 shoulders (33%) were converted to hemiarthroplasty. At last follow-up, conservative treatment and glenoid revision significantly improved AAE, total Constant score, and pain, while hemiarthroplasty did not improve range of movement or clinical scores. Multivariable analysis confirmed that conservative treatment and glenoid revision achieved similar improvements in pain (glenoid revision vs conservative, beta 0.44; p = 0.834) but that outcomes were significantly worse following hemiarthroplasty (beta -5.00; p = 0.029). CONCLUSION: When possible, glenoid loosening after RSA should first be treated conservatively, then by glenosphere revision if necessary, and last by salvage hemiarthroplasty Cite this article: Bone Joint J 2019;101-B:461-469.

Glenosphere design affects range of movement and risk of friction-type scapular impingement in reverse shoulder arthroplasty.

Aims: Scapular notching is a frequently observed radiographic phenomenon in reverse shoulder arthroplasty (RSA), signifying impingement of components. The purposes of this study were to evaluate the effect of glenoid component size and glenosphere type on impingement-free range of movement (ROM) for extension and internal and external rotation in a virtual RSA model, and to determine the optimal configuration to reduce the incidence of friction-type scapular notching. Materials and Methods: Preoperative CT scans obtained in 21 patients (three male, 18 female) with primary osteoarthritis were analyzed using modelling software. Two concurrent factors were tested for impingement-free ROM and translation of the centre of rotation: glenosphere diameter (36 mm vs 39 mm) and type (centred, 2 mm inferior eccentric offset, 10° inferior tilt). Results: Glenosphere size was most predictive of increased extension and external rotation, whereas lateralization of the centre of rotation was the most predictive factor for internal rotation. A larger diameter of glenosphere combined with a 10° tilted configuration demonstrated superior values for extension and external rotation, whereas the eccentric component improved internal rotation by a mean 8.9° (standard deviation 2.7°) compared with a standard concentric glenosphere. Conclusion: Glenosphere configuration can be modified to increase range of movement in RSA. Friction-type scapular notching was most effectively reduced by use of a large-diameter glenosphere with 10° inferior tilt. Cite this article: Bone Joint J 2018;100-B:1182-6.

Characterization of the dysplastic Walch type C glenoid.

Aims: The Walch Type C dysplastic glenoid is characterized by excessive retroversion. This anatomical study describes its morphology. Patients and Methods: A total of 29 shoulders with a dysplastic glenoid were analyzed. CT was used to measure retroversion, inclination, height, width, radius-of-curvature, surface area, depth, subluxation of the humeral head and the Goutallier classification of fatty infiltration. The severity of dysplasia and deficiency of the posterior rim of the glenoid were recorded. Results: A type C glenoid occurred in 1.8% of shoulders referred to our tertiary centres. The mean retroversion, inclination, height, width, radius-of-curvature, surface area, and depth of the glenoid were 37°, 3°, 46 mm, 30 mm, 37°, 1284 mm3, and 16 mm, respectively. The mean posterior subluxation was 90%. The Goutallier class was < 2 in 25 shoulders (86%). Glenoid dysplasia was mild in four, moderate in 14, and severe in 11 shoulders. The typical appearance of the posterior glenoid rim had a rounded or 'lazy J' morphology. The glenoid neck was deficient in 18 shoulders (62%). Conclusion: A dysplastic Type C glenoid characteristically has a uniconcave retroverted morphology, a deficient posteroinferior rim and scapular neck, and a reduced depth. These findings help to define the unique anatomical variations and may aid the planning of surgery and the development of components for these patients. Cite this article: Bone Joint J 2018;100-B:1074-9.

Mid-term results of anatomical total shoulder arthroplasty for primary osteoarthritis using a short-stemmed cementless humeral component.

Aims: The aim of this study was to evaluate the clinical and radiological outcome of using an anatomical short-stem shoulder prosthesis to treat primary osteoarthritis of the glenohumeral joint. Patients and Methods: A total of 66 patients (67 shoulders) with a mean age of 76 years (63 to 92) were available for clinical and radiological follow-up at two different timepoints (T1, mean 2.6 years, sd 0.5; T2, mean 5.3 years, sd 0.7). Postoperative radiographs were analyzed for stem angle, cortical contact, and filling ratio of the stem. Follow-up radiographs were analyzed for timing and location of bone adaptation (cortical bone narrowing, osteopenia, spot welds, and condensation lines). The bone adaptation was classified as low (between zero and three features of bone remodelling around the humeral stem) or high (four or more features). Results: The mean Constant score improved significantly from 28.5 (sd 11.6) preoperatively to 75.5 (sd 8.5) at T1 (p < 0.001) and remained stable over time (T2: 76.6, sd 10.2). No stem loosening was seen. High bone adaptation was present in 42% of shoulders at T1, with a slight decrease to 37% at T2. Cortical bone narrowing and osteopenia in the region of the calcar decreased from 76% to 66% between T1 and T2. Patients with high bone adaptation had a significantly higher mean filling ratio of the stem at the metaphysis (0.60, sd 0.05 vs 0.55, sd 0.06; p = 0.003) and at the diaphysis (0.65 sd 0.05 vs 0.60 sd 0.05; p = 0.007). Cortical contact of the stem was also associated with high bone adaptation (14/25 shoulders, p = 0.001). The clinical outcome was not influenced by the radiological changes. Conclusion: Total shoulder arthroplasty using a short-stem humeral component resulted in good clinical outcomes with no evidence of loosening. However, approximately 40% of the shoulders developed substantial bone loss in the proximal humerus at between four and seven years of follow-up. Cite this article: Bone Joint J 2018;100-B:603-9.

Anatomical total shoulder arthroplasty in young patients with osteoarthritis: all-polyethylene versus metal-backed glenoid.

Aims: Controversy about the use of an anatomical total shoulder arthroplasty (aTSA) in young arthritic patients relates to which is the ideal form of fixation for the glenoid component: cemented or cementless. This study aimed to evaluate implant survival of aTSA when used in patients aged < 60 years with primary glenohumeral osteoarthritis (OA), and to compare the survival of cemented all-polyethylene and cementless metal-backed glenoid components. Materials and Methods: A total of 69 consecutive aTSAs were performed in 67 patients aged < 60 years with primary glenohumeral OA. Their mean age at the time of surgery was 54 years (35 to 60). Of these aTSAs, 46 were undertaken using a cemented polyethylene component and 23 were undertaken using a cementless metal-backed component. The age, gender, preoperative function, mobility, premorbid glenoid erosion, and length of follow-up were comparable in the two groups. The patients were reviewed clinically and radiographically at a mean of 10.3 years (5 to 12, sd 26) postoperatively. Kaplan-Meier survivorship analysis was performed with revision as the endpoint. Results: A total of 26 shoulders (38%) underwent revision surgery: ten (22%) in the polyethylene group and 16 (70%) in the metal-backed group (p < 0.0001). At 12 years' follow-up, the rate of implant survival was 74% (sd 0.09) for polyethylene components and 24% (sd 0.10) for metal-backed components (p < 0.0002). Glenoid loosening or failure was the indication for revision in the polyethylene group, whereas polyethylene wear with metal-on-metal contact, instability, and insufficiency of the rotator cuff were the indications for revision in the metal-backed group. Preoperative posterior subluxation of the humeral head with a biconcave/retroverted glenoid (Walch B2) had an adverse effect on the survival of a metal-backed component. Conclusion: The survival of a cemented polyethylene glenoid component is three times higher than that of a cementless metal-backed glenoid component ten years after aTSA in patients aged < 60 years with primary glenohumeral OA. Patients with a biconcave (B2) glenoid have the highest risk of failure. Cite this article: Bone Joint J 2018;100-B:485-92.

Reverse shoulder arthroplasty for type 1 sequelae of a fracture of the proximal humerus.

Aims: The aim of this study was to analyze the results of reverse shoulder arthroplasty (RSA) in patients with type 1 sequelae of a fracture of the proximal humerus in association with rotator cuff deficiency or severe stiffness of the shoulder. Patients and Methods: A total of 38 patients were included: 28 women and ten men. Their mean age at the time of arthroplasty was 73 years (54 to 91). Before the RSA, 18 patients had been treated with open reduction and internal fixation following a fracture. A total of 22 patients had a rotator cuff tear and 11 had severe stiffness of the shoulder with < 0° of external rotation. The mean follow-up was 4.3 years (1.5 to 10). The Constant score and the range of movement of the shoulder were recorded preoperatively and at final follow-up. Preoperatively, radiographs in two planes were performed, as well as CT or arthro-CT scans; radiographs were also performed at final follow-up. Results: The mean Constant score improved from 25 points (5 to 47) preoperatively to 57 points (15 to 81) postoperatively. The mean forward elevation of the shoulder increased from 73° (10° to 130°) preoperatively to 117° (15° to 170°) postoperatively. Previous surgery did not influence the outcome. Patients with rotator cuff tears had lower Constant scores than patients without (p = 0.037). Those with preoperative stiffness of the shoulder had lower postoperative external rotation compared with patients without stiffness (p = 0.046). There was no radiographic evidence of loosening. Three complications occurred, leading to revision surgery in two patients. In all, 17 patients rated their result as very good (45%), another 17 as good (45%), two as satisfactory (5%), and two as unsatisfactory (5%). Discussion: RSA is an effective form of treatment for patients with type 1 sequelae of a fracture of the proximal humerus associated with rotator cuff deficiency or stiffness of the shoulder, with high rates of satisfaction. Rotator cuff tears and stiffness of the shoulder had an adverse effect on the clinical outcome. Cite this article: Bone Joint J 2018;100-B:318-23.

Percutaneous fixation of valgus displaced fracture of the proximal humerus using a single screw.

Valgus-impacted proximal humerus fracture is a classic but rare entity in shoulder traumatology. Surgical treatment is controversial, with increasing use of minimally invasive techniques. Our technique uses a minimally invasive approach under fluoroscopic control. Raising the humeral head to reduce the valgus enables spontaneous and well-positioned reduction of the tuberosities and screw fixation between the greater tuberosity and the humeral shaft. Indications comprise valgus-impacted fracture without comminution of the medial epiphyseal-metaphyseal hinge or greater tuberosity; the rotator cuff contributes to reduction and must be intact. This type of fixation restores proximal humerus anatomy and achieves consolidation with low risk of secondary necrosis. Minimally invasive single-screw fixation is an alternative of choice for surgical treatment of valgus-impacted proximal humerus fracture.

Superior glenoid inclination and glenoid bone loss : Definition, assessment, biomechanical consequences, and surgical options.

Correct anatomical alignment of the glenoid component is of central importance for wear and loosening in shoulder endoprostheses. The aim of this article is to review and clarify the biomechanical and clinical effects of incorrect glenoid inclination in reverse and anatomical joint replacements. Based on the literature and on our own work, statements are made about the following: (1) the glenoid inclination of a normal glenoid, a degenerative glenoid and a glenoid implant, and the consequences if superior inclination is too large, and (2) the surgical technique as well as tips and tricks for correct adjustment of the inclination. The inclination of the glenoid plane is a morphological parameter of the scapula with high individual variation and is best measured using reformatted computed tomography using three-dimensional software for reconstruction and evaluation. The standard value is between 0 and 10°. Excessive superior inclination promotes translation of the humeral head and the formation of rotator cuff tears-in a degenerative glenoid, to superior wear. The correct amount of superior inclination of the glenoid component is essential for the survival of the implant. Positioning without excessive superior inclination is therefore mandatory. Precise preoperative determination of glenoid inclination and wear is important in order to correctly plan the positioning of an implant. This serves as the basis for deciding whether a bone graft or patient-specific instrumentation is necessary. Thus, the surgeon also has prognostic parameters for the anticipation of possible complications as a result of the bone defect and abnormal orientation. However, the evaluation must always include the position of the scapula in these considerations.

Three-dimensional assessment of the normal Japanese glenoid and comparison with the normal French glenoid.

INTRODUCTION: In 2014, reverse total shoulder arthroplasty was approved in Japan. We were concerned that the base plate might be incompatible with Japanese who were generally smaller than Westerners. Therefore, we investigated the dimensions and morphology of the normal Japanese glenoid and compared with the normal French glenoid. MATERIALS AND METHODS: One hundred Japanese shoulders without glenoid lesions (50 men and 50 women) were investigated and compared with 100 French shoulders (50 men and 50 women). Computed tomography was performed with 3-dimensional image reconstruction and images were analyzed using Glenosys software. Glenoid parameters (width, height, retroversion and inclination) were compared between Japanese and French subjects. RESULTS: In Japanese subjects, the mean glenoid width was 25.5mm, height was 33.3mm, retroversion was 2.3° and inclination was 11.6° superiorly. In French subjects, the mean glenoid width was 26.7mm, height was 35.4mm, retroversion was 6.0° and inclination was 10.4° superiorly. Glenoid width and height were significantly smaller in Japanese subjects than French subjects (P=0.001 and P<0.001), while retroversion was significantly greater in French subjects (P<0.001). There was no significant difference of inclination. CONCLUSIONS: These findings will help surgeons to identify suitable patients for RSA and perform the procedure with appropriate preoperative planning. LEVEL OF EVIDENCE: IV: retrospective or historical series.

Prediction of the pre-morbid 3D anatomy of the proximal humerus based on statistical shape modelling.

AIMS: Restoring the pre-morbid anatomy of the proximal humerus is a goal of anatomical shoulder arthroplasty, but reliance is placed on the surgeon's experience and on anatomical estimations. The purpose of this study was to present a novel method, 'Statistical Shape Modelling', which accurately predicts the pre-morbid proximal humeral anatomy and calculates the 3D geometric parameters needed to restore normal anatomy in patients with severe degenerative osteoarthritis or a fracture of the proximal humerus. MATERIALS AND METHODS: From a database of 57 humeral CT scans 3D humeral reconstructions were manually created. The reconstructions were used to construct a statistical shape model (SSM), which was then tested on a second set of 52 scans. For each humerus in the second set, 3D reconstructions of four diaphyseal segments of varying lengths were created. These reconstructions were chosen to mimic severe osteoarthritis, a fracture of the surgical neck of the humerus and a proximal humeral fracture with diaphyseal extension. The SSM was then applied to the diaphyseal segments to see how well it predicted proximal morphology, using the actual proximal humeral morphology for comparison. RESULTS: With the metaphysis included, mimicking osteoarthritis, the errors of prediction for retroversion, inclination, height, radius of curvature and posterior and medial offset of the head of the humerus were 2.9° (± 2.3°), 4.0° (± 3.3°), 1.0 mm (± 0.8 mm), 0.8 mm (± 0.6 mm), 0.7 mm (± 0.5 mm) and 1.0 mm (± 0.7 mm), respectively. With the metaphysis excluded, mimicking a fracture of the surgical neck, the errors of prediction for retroversion, inclination, height, radius of curvature and posterior and medial offset of the head of the humerus were 3.8° (± 2.9°), 3.9° (± 3.4°), 2.4 mm (± 1.9 mm), 1.3 mm (± 0.9 mm), 0.8 mm (± 0.5 mm) and 0.9 mm (± 0.6 mm), respectively. CONCLUSION: This study reports a novel, computerised method that accurately predicts the pre-morbid proximal humeral anatomy even in challenging situations. This information can be used in the surgical planning and operative reconstruction of patients with severe degenerative osteoarthritis or with a fracture of the proximal humerus. Cite this article: Bone Joint J 2017;99-B:927-33.

No relationship between critical shoulder angle and glenoid erosion after shoulder hemiarthroplasty: a comparative radiographic study.

INTRODUCTION: Symptomatic glenoid erosion is one of the most common causes of functional impairment after shoulder hemiarthroplasty. A decrease in the critical shoulder angle (CSA) has been associated with the development of shoulder arthritis. The inter-observer reliability of the CSA and the relationship between CSA and symptomatic glenoid erosion after shoulder hemiarthroplasty were investigated. MATERIALS AND METHODS: Twenty-eight patients with symptomatic glenoid erosion after anatomic hemiarthroplasty were compared to a control group of 30 patients with no signs of symptomatic glenoid erosion. The CSA was measured by two blinded shoulder surgeons at a mean follow-up of 105.2 and 54.7 months, respectively. The inter-observer reliability was calculated. RESULTS: The mean CSA in the control group in neutral, internal, and external rotations was 34°, 33°, and 33°, respectively. The corresponding values in the study group were 33°, 33°, and 33° (<0.01). The interclass correlation coefficient between the two examiners was 0.917 (P < 0.01), 0.924 (P < 0.01), and 0.948 (P < 0.01), respectively. The Mann-Whitney test between the control group and the study group were, respectively, 0.907, 0.932, and 0.602. CONCLUSION: There were no significant differences of CSA values between the two groups. Good inter-observer reliability was found for the CSA method.

Preliminary clinical outcomes of Latarjet-Patte coracoid transfer by arthroscopy vs. open surgery: Prospective multicentre study of 390 cases.

BACKGROUND: The Latarjet-Patte procedure consisting in transfer and screw fixation of the coracoid process to the anterior glenoid is a treatment of reference for anterior shoulder instability. Over time, surgical innovations translated into a number of improvements and, in late 2003, an arthroscopically assisted variant of the procedure was described. OBJECTIVE: To evaluate and compare clinical outcomes of the modified Latarjet-Patte procedure performed by open surgery, arthroscopy with screw fixation, or arthroscopy with endobutton fixation. MATERIAL AND METHOD: A total of 390 patients who underwent surgery to treat anterior shoulder instability between March 2013 and June 2014 were included and divided into three groups depending on whether they were managed using open surgery with screw fixation, arthroscopy with screw fixation, or arthroscopy with endobutton fixation. Clinical findings were recorded pre-operatively then 6 months post-operatively and at last follow-up (mean, 27.7 months). Range of motion and apprehension test (arm in external rotation at 0°, 90°, and 140° of abduction) were assessed and the Walch-Duplay and modified Rowe scores were determined. RESULTS: Motion range restriction was minimal with all three techniques, and motion range continued to improve throughout follow-up. Apprehension in external rotation was noted at 90° of abduction in 11% of cases and at 140° of abduction in 4% of cases. The mean total Walch-Duplay score improved from 46 pre-operatively to 90.6 and the mean total modified Rowe score from 46 pre-operatively to 91.1. By statistical analysis, external rotation at 90° of abduction and internal rotation at 0° of abduction were better after open surgery, but the differences were of limited clinical significance. Recurrence was noted in 3.3% of cases, nerve injury in 0.8%, and infection in 1.5%. CONCLUSION: In this study, the three techniques produced similar clinical outcomes, with a stable shoulder and no joint stiffness.

Is anterior glenoid bone block position reliably assessed by standard radiography? A cadaver study.

BACKGROUND: Standard radiography with an antero-posterior view and Bernageau's glenoid profile view is the method most widely reported in the literature to assess coracoid bone block position and fusion. OBJECTIVE: The aim of this cadaver study was to determine whether the antero-posterior and Bernageau's radiographs provide a reliable and reproducible evaluation of the position of a coracoid bone block and its fixation screws. METHOD: An isolated scapula showing no evidence of osteoarthritis or other abnormalities was used. The coracoid process was transferred to the anterior glenoid rim. Fixation was with two slightly diverging malleolar screws, chosen of different sizes for ease of identification. Computed tomography (CT) was performed as the reference imaging technique. The standard radiographs were then obtained, using fluoroscopy to accurately position the scapula for the antero-posterior and Bernageau's views. This position was defined as 0°, and radiographs were taken at angles of 5°, 10°, and 15° in all three planes. All radiographs were taken during a single session to ensure that the distance separating the tube from the scapula remained unchanged. The images were exported to OsiriX for analysis. We measured the angles formed by the screws and the glenoid surface, as well as bone block position and overhang. Finally, we used 1-mm thick disks to evaluate bone-to-bone contact. RESULTS: No correlations were found between values by CT and by standard radiography (both views) for the screw angles or overhang. A space≤1mm between the neck of the scapula and the bone block was not visible on the standard radiographs in any of the positions. CONCLUSION: Standard radiography does not provide an accurate analysis of bone block position or bone-to-bone contact. CT is needed to assess bone block and screw position and bone-to-bone contact. LEVEL OF EVIDENCE: Level III.

Functional outcomes after open versus arthroscopic Latarjet procedure: A prospective comparative study.

INTRODUCTION: The Latarjet procedure provides effective stabilization of chronically unstable shoulders. Since this procedure is mainly performed in a young athletic population, the functional impact is significant. Published data does not shed light on the time needed to recover work-related or sports-related function. Performing this procedure arthroscopically may improve functional recovery. This led us to carry out a prospective, multicenter study to compare the functional recovery after arthroscopic versus open Latarjet procedure. MATERIAL AND METHODS: Between June and November 2014, 184 patients were included in a prospective multicenter study: 85 in the open group and 99 in the arthroscopy group. The patients were evaluated preoperatively with the WOSI score. The early postoperative pain was evaluated on D3, D7 and D30. The WOSI score was determined postoperatively at 1, 3, 6 and 12 months of follow-up. RESULTS: The functional scores of the shoulder in both cohorts were identical overall preoperatively. In the immediate postoperative period, the arthroscopy group had statistically lower pain levels on D3 and D7. The postoperative WOSI was improved in both groups at 3 months, then continued to improve until it reached a plateau at 1 year. The WOSI score was better in the arthroscopy group at 3 months, but better in the open group at 6 months. CONCLUSION: This study found that a Latarjet procedure performed arthroscopically generates less immediately postoperative pain than when it is performed as an open procedure. The Latarjet procedure (whether open or arthroscopic) improves shoulder function, with normal function returning after 1 year.

Patient-specific glenoid guides provide accuracy and reproducibility in total shoulder arthroplasty.

AIMS: Patient-specific glenoid guides (PSGs) claim an improvement in accuracy and reproducibility of the positioning of components in total shoulder arthroplasty (TSA). The results have not yet been confirmed in a prospective clinical trial. Our aim was to assess whether the use of PSGs in patients with osteoarthritis of the shoulder would allow accurate and reliable implantation of the glenoid component. PATIENTS AND METHODS: A total of 17 patients (three men and 14 women) with a mean age of 71 years (53 to 81) awaiting TSA were enrolled in the study. Pre- and post-operative version and inclination of the glenoid were measured on CT scans, using 3D planning automatic software. During surgery, a congruent 3D-printed PSG was applied onto the glenoid surface, thus determining the entry point and orientation of the central guide wire used for reaming the glenoid and the introduction of the component. Manual segmentation was performed on post-operative CT scans to compare the planned and the actual position of the entry point (mm) and orientation of the component (°). RESULTS: The mean error in the accuracy of the entry point was -0.1 mm (standard deviation (sd) 1.4) in the horizontal plane, and 0.8 mm (sd 1.3) in the vertical plane. The mean error in the orientation of the glenoid component was 3.4° (sd 5.1°) for version and 1.8° (sd 5.3°) for inclination. CONCLUSION: Pre-operative planning with automatic software and the use of PSGs provides accurate and reproducible positioning and orientation of the glenoid component in anatomical TSA. Cite this article: Bone Joint J 2016;98-B:1080-5.

Conversion of total shoulder arthroplasty to reverse shoulder arthroplasty made possible by custom humeral adapter.

Reverse shoulder arthroplasty (RSA) is increasingly being used to revise anatomical total shoulder arthroplasty cases. This procedure's high complication rate has been reduced by the availability of modular shoulder systems, which allows the humeral component to be preserved during the conversion. This case report describes the revision of an anatomical shoulder implant inserted in 1998. Polyethylene wear and the resulting metal-on-metal contact had caused metallosis. Since the existing humeral implant was not compatible with standard conversion products, the manufacturer provided a custom humeral adapter that allowed the humeral stem to be preserved. This approach greatly simplified the surgical procedure and resulted in good anatomical and clinical outcomes after 9 months of follow-up.

Arthrosis of the knee in chronic anterior laxity.

Arthrosis following rupture of the anterior cruciate ligament has been analysed in two series. The first series was derived from a review of 150 cases of reconstruction of the anterior cruciate ligament with a follow-up of 3 years or more. Arthrosis was seen to have developed in 13.3%. The second series was concerned with 64 cases of unilateral arthrosis treated by upper tibial valgus osteotomy in whom there had been a previous rupture of the anterior cruciate ligament. The 'tolerance interval'--that is the time between the original ligamentous injury and the time of osteotomy--for the development of arthrosis was very variable, ranging in the natural-history cases from 10 to 50 years, with a mean of 35 years. It is important to recognise the radiological signs of the onset of arthrosis. These are osteophytosis of the intercondylar notch, osteophyte formation at the posterior part of the medial tibial plateau, and, in particular, narrowing of the medial joint line with posterior subluxation of the medial femoral condyle, well seen in lateral radiographs whilst standing on one lower limb. Early arthroses, appearing after 10 years, may occur as a 'natural arthrosis', but it develops much more frequently after surgical treatment that had failed to correct anterior laxity and particularly when it had been performed on knees that were already pre-arthrotic. The main factor in arthrosis is anterior laxity measured radiologically by an 'active Lachman' radiograph. Removal of the medial meniscus which in itself, is liable to produce arthrosis, is even more harmful in anterior cruciate laxity since it doubles the degree of anterior subluxation of the tibia seen on unilateral weight-bearing. The development of varus deformity, which characterises progressive arthrosis, has its origin in wear of the posterior part of the medial tibial plateau caused by anterior cruciate laxity. Other factors play an important part such as associated lateral laxity, constitutional genu varum and weakness of the hamstring muscles, which oppose the subluxating action of the quadriceps.

Three-dimensional assessment of the dimensions of the osteoarthritic glenoid.

Osteoarthritis results in changes in the dimensions of the glenoid. This study aimed to assess the size and radius of curvature of arthritic glenoids. A total of 145 CT scans were analysed, performed as part of routine pre-operative assessment before total shoulder replacement in 91 women and 54 men. Only patients with primary osteoarthritis and a concentric glenoid were included in the study. The CT scans underwent three-dimensional (3D) reconstruction and were analysed using dedicated computer software. The measurements consisted of maximum superoinferior height, anteroposterior width and a best-fit sphere radius of curvature of the glenoid. The mean height was 40.2 mm (SD 4.9), the mean width was 29 mm (SD 4.3) and the mean radius of curvature was 35.4 mm (SD 7.8). The measurements were statistically different in men and women and had a Gaussian distribution with marked variation. All measurements were greater than the known values in normal subjects. With current shoulder replacement systems using a unique backside radius of curvature for the glenoid component, there is a risk of undertaking excessive reaming to adapt the bone to the component resulting in sacrifice of subchondral bone or under-reaming and instability of the component due to a 'rocking horse' phenomenon.