Factors to consider in the safe design of intensive care units - Part 1: historical aspects and ventilation systems.

Background: Evidence linking the role of ventilation systems in transmission of infection to patients in intensive care units has increased in recent years. Aims: This research-based commentary set out to identify the historical aspect of intensive care unit design, current problems and some potential solutions with respect to ventilation systems. Methods: Databases and open source information was used to obtain data on the historical aspects and current guidance in ICU, and the authors experiences have been used to suggest potential solutions to ventilation problems in ICU. Findings: The authors found a number of problems with ventilation in ICU to which there has not been a cohesive response in terms of guidance to support users and designers. The resultant void permits new projects to proceed with suboptimal and designs which place patients and staff at risk. Discussion: The NHS is now at the start of major new investments in healthcare facilities in England and this together with the end of the antibiotic era mandates new guidance to address these major concerns.

Implementing changes to reduce infections in ICU patients. Water services and waste systems.

Background: Evidence linking the role of water services in transmission of infection to patients in ICUs has increased in recent years. Aims: This research based commentary set out to identify potential solutions for water and wastewater systems in ICU settings. Methods: Databases and open source information was used to obtain data on approaches to water and wastewater-related issues in ICU settings. This and the authors experiences have been used to describe approaches to these problems. Findings: The lack of updated guidance has required some ICUs to develop unique responses, including 'water free' patient care combined with reduction in water services. The options consider guidance, compliance, training and education as key factors to successful outcomes and protecting vulnerable patients in ICU. Discussion: The authors found a number of problems with water and wastewater systems in ICU to which there has not been a cohesive response in terms of guidance to support users and designers. The resultant void permits new projects to proceed with suboptimal and designs which place patients and staff at risk. As an interim measure a series of solutions suitable for existing units and new builds need to be considered.

Aspects and problems associated with the water services to be considered in intensive care units.

Background: Water is a product taken for granted and assumed to be a safe commodity in intensive care units (ICU). Biofilm readily becomes established in complex water services presenting a risk to vulnerable patients. Harboured within biofilms are opportunistic pathogens which can be transmitted via hand contact, splashing, aerosol and indirect contact through medical equipment. Evidence linking the role of water services in transmission of infection to patients in ICUs has increased in recent years. Aims: This research based commentary set out to identify current problems with water and wastewater systems in ICU settings. Methods: Databases and open source information was used to obtain data on current water and wastewater-related issues in ICU settings. This and the authors experiences have been used to describe current challenges. Findings: the authors found a number of problems with water systems in ICU to which there has not been a cohesive response in terms of guidance to support users and designers. The resultant void permits new projects to proceed with suboptimal and designs which place patients and staff at risk. Discussion: Hand hygiene stations are frequently misused or close enough to patients such that splashing poses a transmission risk. The wastewater system (drain) also presents a risk, from where Gram-negative antibiotic resistant organisms may be dispersed resulting in untreatable patient infections. The water and wastewater system provide a superhighway for the movement of pathogenic microorganisms and these risks need to be addressed if we are to safeguard vulnerable users in ICU.

Growth of Legionella anisa in a model drinking water system to evaluate different shower outlets and the impact of cast iron rust.

Legionella continues to be a problem in water systems. This study investigated the influence of different shower mixer faucets, and the influence of the presence of cast iron rust from a drinking water system on the growth of Legionella. The research is conducted using a model of a household containing four drinking water systems. All four systems, which contained standard plumbing components including copper pipes and a water heater, were filled with unchlorinated drinking water. Furthermore, all systems had three different shower faucets: (A) a stainless-steel faucet, (B) a brass-ceramic faucet, and (C) a brass thermostatic faucet. System 1 was solely filled with drinking water. System 2 was filled with drinking water, and cast iron rust. System 3 was contaminated with Legionella, and system 4 was contaminated with a Legionella, and cast iron rust. During a period of 34 months, 450 cold water samples were taken from 15 sample points of the four drinking water systems, and tested for Legionella according to the Dutch Standard (NEN 6265). In system 4, with added cast iron rust, the stainless-steel mixer faucet (A) had the highest concentration of Legionella at >4.3log10CFU/l (>20,000CFU/l) and was positive in 46.4% of samples. In contrast, the stainless-steel mixer faucet (A) of system 3 without cast iron rust showed 14.3% positive samples with a maximum concentration of 3.9log10CFU/l (7600CFU/l) Legionella. Additionally, both contaminated systems (3 and 4), with the brass thermostatic faucet (C), tested positive for Legionella. System 3 in 85.7% of the samples, with a maximum concentration of 4.38log10CFU/l (24,200CFU/l), and system 4 in 64.3% of the samples with a maximum concentration of 4.13log10CFU/l (13.400CFU/l). These results suggest that both the type of faucet used in a drinking water system and the presence or absence of cast iron rust influence the growth of Legionella.

A Year in the Life of a Contaminated Heater-Cooler Unit With Mycobacterium chimaera?

OBJECTIVE Heater-cooler units (HCUs) have been shown to be a source of Mycobacterium chimaera infections. For the past year, weekly water samples have been taken from HCUs used at University Hospitals Birmingham (UHB) NHS Foundation Trust. We report the microbial contamination of the HCUs over a year detailing the decontamination regimes applied at UHB to reduce the microbial load. DESIGN Observational study SETTING UHB is a tertiary referral teaching hospital in Birmingham, United Kingdom, that provides clinical services to nearly 1 million patients every year. The UHB Cardiac department is one of the largest in the United Kingdom and provides treatment for adult patients with a wide range of cardiac diseases. METHODS Water samples taken from HCUs used at UHB for cardiopulmonary bypass surgery were sampled over a year to determine the number of microorganisms by membrane filtration. Various decontamination processes were employed throughout the year. RESULTS Varying total viable counts containing a wide variety of microorganisms were obtained from water inside the HCUs. No M. chimaera were isolated after replacement of the HCU internal tubing. Stringent decontamination regimes resulted in degradation of the HCUs and increased TVCs after several months. CONCLUSION More work is required to ensure effective decontamination processes to reduce the microbial load within the HCUs. Our studies indicate that weekly water sampling for TVC will be required indefinitely to monitor the water quality in these units as well as regular replacement of the tubing to control the build-up of biofilm. Infect Control Hosp Epidemiol 2017;38:705-711.

Comments on Whiley Legionella Risk Management and Control in Potable Water Systems: Argument for the Abolishment of Routine Testing. Int. J. Environ. Res. Public Health 2017, 14, 12.

In their recent article, Whiley makes an interesting case for the abolishment of routine testing in Legionella risk management and control plans. Here, we present our views regarding this suggestion, drawing upon our own experiences in the UK. We urge caution against the removal of routine monitoring from guidelines due to the impending public health risks that would result.

Occurrence of Legionella in UK household showers.

Household water systems have been proposed as a source of sporadic, community acquired Legionnaires' disease. Showers represent a frequently used aerosol generating device in the domestic setting yet little is known about the occurrence of Legionella spp. in these systems. This study has investigated the prevalence of Legionella spp. by culture and qPCR in UK household showers. Ninety nine showers from 82 separate properties in the South of England were sampled. Clinically relevant Legionella spp. were isolated by culture in 8% of shower water samples representing 6% of households. Legionella pneumophila sg1 ST59 was isolated from two showers in one property and air sampling demonstrated its presence in the aerosol state. A further 31% of showers were positive by Legionella spp. qPCR. By multi-variable binomial regression modelling Legionella spp. qPCR positivity was associated with the age of the property (p=0.02), the age of the shower (p=0.01) and the frequency of use (p=0.09). The concentration of Legionella spp. detected by qPCR was shown to decrease with increased frequency of use (p=0.04) and more frequent showerhead cleaning (p=0.05). There was no association between Legionella spp. qPCR positivity and the cold water supply or the showerhead material (p=0.65 and p=0.71, respectively). Household showers may be important reservoirs of clinically significant Legionella and should be considered in source investigations. Simple public health advice may help to mitigate the risk of Legionella exposure in the domestic shower environment.

Rapid investigation of cases and clusters of Legionnaires' disease in England and Wales using direct molecular typing.

Legionella pneumophila is the leading cause of Legionnaires' disease, a severe pneumonia that can occur as sporadic cases or point-source outbreaks affecting multiple patients. The infection is acquired by inhalation of aerosols from contaminated water systems. In order to identify the probable source and prevent further cases, clinical and environmental isolates are compared using phenotypic and genotypic methods. Typically up to 10 days are required to isolate L. pneumophila prior to the application of standard typing protocols. A rapid protocol using a real-time PCR specific for L. pneumophila and serogroup 1, combined with nested direct molecular typing, was adopted by Public Health England in 2012 to reduce reporting time for preliminary typing results. This rapid protocol was first used to investigate an outbreak that occurred in July/August 2012 and due to the positive feedback from that investigation, it was subsequently applied to other incidents in England and Wales where faster typing results would have aided incident investigation. We present here results from seven incidents that occurred between July 2012 and June 2015 where the use of this rapid approach provided preliminary characterization of the infecting strain in an average 1.58 days (SD 1.01) after sample receipt in contrast to 9.53 days (SD 3.73) when standard protocols were applied.

Biofilm formation in an experimental water distribution system: the contamination of non-touch sensor taps and the implication for healthcare.

Hospital tap water is a recognised source of Pseudomonas aeruginosa. U.K. guidance documents recommend measures to control/minimise the risk of P. aeruginosa in augmented care units but these are based on limited scientific evidence. An experimental water distribution system was designed to investigate colonisation of hospital tap components. P. aeruginosa was injected into 27 individual tap 'assemblies'. Taps were subsequently flushed twice daily and contamination levels monitored over two years. Tap assemblies were systematically dismantled and assessed microbiologically and the effect of removing potentially contaminated components was determined. P. aeruginosa was repeatedly recovered from the tap water at levels above the augmented care alert level. The organism was recovered from all dismantled solenoid valves with colonisation of the ethylene propylene diene monomer (EPDM) diaphragm confirmed by microscopy. Removing the solenoid valves reduced P. aeruginosa counts in the water to below detectable levels. This effect was immediate and sustained, implicating the solenoid diaphragm as the primary contamination source.

Detection of Waterborne Viruses Using High Affinity Molecularly Imprinted Polymers.

Molecularly imprinted polymers (MIPs) are artificial receptor ligands which can recognize and specifically bind to a target molecule. They are more resistant to chemical and biological damage and inactivation than antibodies. Therefore, target specific-MIP nanoparticles are aimed to develop and implemented to biosensors for the detection of biological toxic agents such as viruses, bacteria, and fungi toxins that cause many diseases and death due to the environmental contamination. For the first time, a molecularly imprinted polymer (MIP) targeting the bacteriophage MS2 as the template was investigated using a novel solid-phase synthesis method to obtain the artificial affinity ligand for the detection and removal of waterborne viruses through optical-based sensors. A high affinity between the artificial ligand and the target was found, and a regenerative MIP-based virus detection assay was successfully developed using a new surface plasmon resonance (SPR)-biosensor which provides an alternative technology for the specific detection and removal of waterborne viruses that lead to high disease and death rates all over the world.

Aerosolization of respirable droplets from a domestic spa pool and the use of MS-2 coliphage and Pseudomonas aeruginosa as markers for Legionella pneumophila.

Legionnaires' disease can result when droplets or aerosols containing legionella bacteria are inhaled and deposited in the lungs. A number of outbreaks have been associated with the use of a spa pool where aeration, a high water temperature, and a large and variable organic load make disinfectant levels difficult to maintain. Spa pool ownership is increasing, and the aim of this study, using two surrogate organisms (MS-2 coliphage and Pseudomonas aeruginosa [a natural contaminant]), was to assess the potential risk to domestic users when disinfection fails. A representative "entry level" domestic spa pool was installed in an outdoor courtyard. The manufacturer's instructions for spa pool maintenance were not followed. A cyclone sampler was used to sample the aerosols released from the spa pool with and without activation of the air injection system. Samples were taken at increasing heights and distances from the pool. An aerodynamic particle sizer was used to measure the water droplet size distribution at each sample point. When the air injection system was inactivated, neither surrogate organism was recovered from the air. On activation of the air injection system, the mean mass of droplets within the respirable range (10 cm above the water line) was 36.8 µg cm(-3). This corresponded to a mean air concentration of P. aeruginosa of 350 CFU m(-3). From extrapolation from animal data, the estimated risk of infection from aerosols contaminated with similar concentrations of Legionella pneumophila was 0.76 (males) and 0.65 (females). At 1 m above and/or beyond the pool, the mean aerosol mass decreased to 0.04 µg cm(-3) and corresponded to a 100-fold reduction in mean microbial air concentration. The estimated risk of infection at this distance was negligible.

Testing the efficacy of homemade masks: would they protect in an influenza pandemic?

OBJECTIVE: This study examined homemade masks as an alternative to commercial face masks. METHODS: Several household materials were evaluated for the capacity to block bacterial and viral aerosols. Twenty-one healthy volunteers made their own face masks from cotton t-shirts; the masks were then tested for fit. The number of microorganisms isolated from coughs of healthy volunteers wearing their homemade mask, a surgical mask, or no mask was compared using several air-sampling techniques. RESULTS: The median-fit factor of the homemade masks was one-half that of the surgical masks. Both masks significantly reduced the number of microorganisms expelled by volunteers, although the surgical mask was 3 times more effective in blocking transmission than the homemade mask. CONCLUSION: Our findings suggest that a homemade mask should only be considered as a last resort to prevent droplet transmission from infected individuals, but it would be better than no protection.

A pragmatic approach to Pseudomonas.

Last month's HEJ featured an article based on a presentation at a recent IHEEM seminar given by Dr Jimmy Walker, principal investigator, Decontamination, Biosafety Unit, Microbiology Services, at the Health Protection Agency, who provided valuable advice on detecting and dealing with Pseudomonas in hospital water supplies. Here Dr Walker, and HPA colleague, Peter Hoffman, consultant clinical scientist at the Agency's Laboratory of Healthcare-associated Infection, Microbiology Services, give a detailed overview of the key characteristics of Pseudomonas aeruginosa biofilms, and describe some of the most effective ways for controlling their spread in hospital water systems.

The effectiveness of sodium dichloroisocyanurate treatments against Clostridium difficile spores contaminating stainless steel.

BACKGROUND: Clostridium difficile is a major cause of hospital-associated infective diarrhea, and its spore form can persist for months in the hospital environment. Chlorine-based cleaning agents are recommended for eliminating this reservoir of potential infection. OBJECTIVES: To investigate the individual contributions of active chlorine, detergent and mechanical action on decontamination of a C difficile contaminated surface. METHODS: C difficile spores in test soil were dried onto stainless steel strips and exposed to sodium dichloroisocyanurate (NaDCC) or NaDCC combined with detergent (NaDCC+) or exposed to these cleaning formulations combined with wiping and/or detergent precleaning. After set contact times, remaining viable spores from the strips were recovered and enumerated by vortexing with glass beads, followed by membrane filtration. RESULTS: Compared with NaDCC, the inclusion of detergent in the NaDCC+ formulation did not improve the effectiveness of decontamination in any exposure-only treatment at concentrations tested (P > .05). Combining wiping with exposure to the cleaning formulations improved decontamination effectiveness with further reductions in spore counts of 1.66- and 2.19-log(10) colony-forming units at 2 and 20 minutes, respectively, using NaDCC, and of 2.46 and 2.56 log(10) colony-forming units at 2 and 20 minutes, respectively, using NaDCC+. Precleaning the strips by wiping with detergent before exposure to NaDCC was more effective than wiping with NaDCC or NaDCC+ at 10 and 20 minutes contact times. Wiping with NaDCC+ was more effective than NaDCC only at a 2-minute contact time. Wiping with detergent followed by subsequent wiping with NaDCC (1,000 ppm) was the most effective treatment tested with a 4.00-log(10) reduction observed. CONCLUSION: Rigorous precleaning with detergent and the associated physical removal of spores through the mechanical action associated with wiping are important factors in achieving effective decontamination of surfaces when using chlorine-based agents.