Meeting technical challenges for protein characterization and surrogate equivalence studies that resulted from insecticidal protein co-expression in maize event MZIR098.

Safety assessment of genetically modified plants includes protein characterization to confirm the intended trait protein expression. In addition, to conduct safety tests, the large amount of purified protein needed is usually met through the use of a surrogate, microbially produced protein source. Characterization of the eCry3.1Ab and mCry3A proteins as derived from Event MZIR098 maize was challenging because of the difficulty in purifying/isolating these proteins that are of similar molecular weight and have considerable shared sequence and immunogenicity. This also applies to establishing the biochemical equivalence to the microbially produced surrogate proteins, as highly-purified plant protein is required. While use of crude plant extracts facilitated functional equivalence testing with the surrogate proteins, a separate technical challenge had to be met. The eCry3.1Ab and mCry3A proteins display differentiated modes of action toward CRW pests, however, with the same overall target pest spectrum, no differential test organism existed to allow equivalence testing for one insecticidal protein in the presence of the other. To establish that the microbially produced proteins are suitable surrogates for the plant-produced proteins, the challenges in the protein purification and bioactivity testing had to be addressed. This article describes technical solutions to assess and characterize the insecticidal proteins in this new event and thereby confirm equivalence/suitability of the microbially produced protein surrogates.

When the Whole is Not Greater than the Sum of the Parts: A Critical Review of Laboratory Bioassay Effects Testing for Insecticidal Protein Interactions.

Many studies have been conducted to investigate synergism among insecticidal proteins; however, a consensus on minimal data requirements and interpretation is lacking. While some have concluded that all additive predictive-type models should be abandoned, we advocate that additivity models can remain useful as assessment tools and that an appropriately designed interaction study will never systematically underestimate the existence of synergism, irrespective of which additivity model (or none at all) may be used. To generate the most meaningful synergy assessment datasets in support of safety assessments, we highlight two beneficial steps to follow: (i) select a testing model which is the most consistent with current knowledge regarding the action of the insecticidal proteins and (ii) avoid using bioassay methods which may result in excess response heterogeneity. We also outline other experimental design elements to consider, which may be crucial for conducting future studies of this type. A contrast of underlying testing assumptions associated with the additivity models is provided, along with a comprehensive review of interaction data for Cry1, Cry2, Cry3, Cry9, and Vip3A insecticidal proteins. Our review captures four recurrent findings: i) experiments reporting synergistic interactions are a minority, ii) the degree of synergism reported is low in magnitude, iii) reported interactions are sometimes equivocal/inconclusive due to unconfirmed model assumptions or other bioassay challenges, and iv) due to biological response variation many of the reported interactions may be artefactual. A brief overview of the positioning of interaction testing data in safety assessments of GM food crops is also provided.

A General Approach to Test for Interaction Among Mixtures of Insecticidal Proteins Which Target Different Orders of Insect Pests.

A shift toward transgenic crops which produce combinations of insecticidal proteins has increased the interest (Syngenta Seeds, Inc., Minnetonka, MN) in studying the potential for interactions amongst those proteins. We present a general testing method which accommodates proteins with nonoverlapping spectrums of activity. Our sequential testing approach first investigates groups of the proteins with overlapping activity; e.g., proteins active against Lepidoptera or Coleoptera, respectively. The Colby method is used to test for interactions within each respective group. Subsequently, the mixture of proteins within each group is regarded as a single entity and tests for interactions between the groups (when combined) is conducted using analysis of variance. We illustrate the method using Cry1Ab, Vip3Aa20, and Cry1F (a mixture of proteins active against Lepidoptera), and mCry3A and eCry3.1Ab (a mixture of proteins active against Coleoptera). These insecticidal proteins are produced by Bt11 × MIR162 × TC1507 × MIR604 × 5307 maize. We detected no interactions between Cry1Ab, Vip3Aa20, and Cry1F in tests using larvae of two different lepidopteran species, and possible slight antagonism between mCry3A and eCry3.1Ab with a coleopteran test species. We detected no effect of (eCry3.1Ab + mCry3A) on the potency of (Cry1Ab + Vip3Aa20 + Cry1F) to lepidopteran larvae, and no effect of (Cry1Ab + Vip3Aa20 + Cry1F) on the potency of (mCry3A + eCry3.1Ab) to coleopteran larvae. We discuss implications of these results for characterization of Bt11 × MIR162 × TC1507 × MIR604 × 5307 maize, and the value of the method for characterizing other transgenic crops that produce several insecticidal proteins.

Impact of Spodoptera frugiperda neonate pretreatment conditions on Vip3Aa19 insecticidal protein activity and laboratory bioassay variation.

BACKGROUND: Variation in response to insecticidal proteins is common upon repetition of insect bioassays. Understanding this variation is a prerequisite to detecting biologically important differences. We tracked neonate Spodoptera frugiperda (J.E. Smith) susceptibility to Vip3Aa19 over 17 generations using standardized bioassay methods. Five larval pretreatment conditions and one bioassay condition were tested to determine whether susceptibility was affected. These included: storage time; prefeeding; storage at reduced temperature; storage at reduced humidity; colony introgression of field-collected individuals. Extremes of photoperiod during the bioassay itself were also examined. RESULTS: LC50 values for two strains of S. frugiperda varied 6.6-fold or 8.8-fold over 17 generations. Storage time and humidity had no impact on Vip3Aa19 susceptibility, whereas prefeeding significantly reduced subsequent mortality (by 27%). Storage at reduced temperature increased mortality for one colony (from 45.6 to 73.0%) but not for the other. Introgression of field-collected individuals affected susceptibility at the first generation but not for subsequent generations. A 24 h bioassay photophase significantly reduced susceptibility (by 26%) for both colonies. CONCLUSION: Certain pretreatment and bioassay conditions were identified that can affect S. frugiperda Vip3Aa19 susceptibility, but innate larval heterogeneity was also present. Our observations should help to increase the consistency of insecticidal protein bioassay results.

A Standardized Lepidopteran Bioassay to Investigate the Bioactivity of Insecticidal Proteins Produced in Transgenic Crops.

Insecticidal bioassays are the only reliable method to investigate the biological activity of an insecticidal protein and therefore provide an essential toolkit for the characterization and potency determination of these proteins. Here we present a standardized method for a lepidopteran larval bioassay, which is optimized to specifically estimate activity of insecticidal proteins produced in transgenic plants. The treatment can be either applied to the surface of the artificial diet, or blended into the diet.

Lepidopteran-active variable-region sequence imparts coleopteran activity in eCry3.1Ab, an engineered Bacillus thuringiensis hybrid insecticidal protein.

A unique, coleopteran-active protein, termed eCry3.1Ab, was generated following variable-region exchange of a Bacillus thuringiensis lepidopteran-active protein, Cry1Ab, with a Cry3A region. Our results support the hypothesis that this variable-region exchange is responsible for imparting strong bioactivity against the larvae of western corn rootworm (WCR) (Diabrotica virgifera virgifera LeConte), a pest species which is not susceptible to either parent protein sequence. This study demonstrates the potential of successfully engineering a portion(s) of a lepidopteran-active B. thuringiensis sequence so that it has activity against coleopterans. Further elucidation of the eCry3.1Ab activity indicated the importance of variable regions 4 to 6 that were derived from Cry1Ab instead of Cry1Ac. There was some flexibility in making domain III of engineered hybrid insecticidal proteins even more Cry1Ab-like and retaining activity, while there was less flexibility in making domain III more Cry3A-like and retaining activity. In vitro binding studies with brush border membrane vesicles demonstrated that there was specific binding of chymotrypsin-processed modified Cry3A (mCry3A), which was not diminished by addition of a 100-fold molar excess of chymotrypsin-processed eCry3.1Ab or unprocessed eCry3.1Ab. In addition, in the converse experiment, specific binding of chymotrypsin-processed eCry3.1Ab was not diminished by the presence of a 75-fold molar excess of chymotrypsin-processed mCry3A. These data support the hypothesis that eCry3.1Ab can interact with different binding sites than the activated form of mCry3A in the WCR brush border and may provide a different mode of action from the standpoint of resistance management.

From enzyme to zymogen: engineering Vip2, an ADP-ribosyltransferase from Bacillus cereus, for conditional toxicity.

The adenosine diphosphate (ADP)-ribosyltransferase, Vip2 (vegetative insecticidal protein), from Bacillus cereus in combination with another protein from the same organism, Vip1, has insecticidal activity against western corn rootworm larvae. The Vip2 protein exerts its intracellular poisoning effect by modifying actin and preventing actin polymerization. Due to the nature of this toxin, expression of Vip2 in planta is lethal. In this work, we attempted to build an enzyme precursor (proenzyme, zymogen) that would silently reside in one biological system (e.g. plants or yeast) and be activated in the other (insect larvae). Our approach involved engineering a random propeptide library at the C-terminal end of Vip2 and selecting for malfunctional enzyme variants in yeast. A selected proenzyme (proVip2) possesses reduced enzymatic activity as compared with the wild-type Vip2 protein, but remains a potent toxin toward rootworm larvae. In addition, upon analysis of the digestive fate of the engineered enzyme precursor in rootworm larvae, we demonstrated that 'zymogenized' Vip2 can be proteolytically activated by rootworm digestive enzyme machinery. This report represents an example of applying a protein engineering strategy for the creation of a plant-tolerated, zymogen-like form of an otherwise toxic protein. This approach may outline a novel path to address challenges associated with utilizing toxic proteins in certain biotechnological applications.

An engineered chymotrypsin/cathepsin G site in domain I renders Bacillus thuringiensis Cry3A active against Western corn rootworm larvae.

The western corn rootworm remains one of the most important pests of corn in the United States despite the use of many pest management tools. Cry3A, the first coleopteran-active Bacillus thuringiensis toxin isolated, has not been useful for control of the corn rootworm pest complex. Modification of Cry3A so that it contained a chymotrypsin/cathepsin G protease recognition site in the loop between alpha-helix 3 and alpha-helix 4 of domain I, however, resulted in consistent activity of the toxin ("mCry3A") against neonate western corn rootworm. In vitro chymotrypsin digests showed that there was a substantial difference between the enzyme sensitivity of mCry3A and the enzyme sensitivity of Cry3A, with mCry3A rapidly converted from a 67-kDa form to a approximately 55-kDa form. The introduced protease site was also recognized in vivo, where the approximately 55-kDa form of mCry3A toxin was rapidly generated and associated with the membrane fraction. After a point mutation in mcry3A that resulted in the elimination of the native domain I chymotrypsin site (C terminal to the introduced chymotrypsin/cathepsin G protease site of mCry3A), the in vitro and in vivo digestion patterns remained the same, demonstrating that the introduced site was required for the enhanced activity. Also, 55-kDa mCry3A generated by cleavage with chymotrypsin exhibited specific binding to western corn rootworm brush border membrane, whereas untreated 67-kDa mCry3A did not. These data indicate that the mCry3A toxicity for corn rootworm larvae was due to the introduction of a chymotrypsin/cathepsin G site, which enhanced cleavage and subsequent binding of the activated toxin to midgut cells.

The mode of action of the Bacillus thuringiensis vegetative insecticidal protein Vip3A differs from that of Cry1Ab delta-endotoxin.

The Vip3A protein, secreted by Bacillus spp. during the vegetative stage of growth, represents a new family of insecticidal proteins. In our investigation of the mode of action of Vip3A, the 88-kDa Vip3A full-length toxin (Vip3A-F) was proteolytically activated to an approximately 62-kDa core toxin either by trypsin (Vip3A-T) or lepidopteran gut juice extracts (Vip3A-G). Biotinylated Vip3A-G demonstrated competitive binding to lepidopteran midgut brush border membrane vesicles (BBMV). Furthermore, in ligand blotting experiments with BBMV from the tobacco hornworm, Manduca sexta (Linnaeus), activated Cry1Ab bound to 120-kDa aminopeptidase N (APN)-like and 250-kDa cadherin-like molecules, whereas Vip3A-G bound to 80-kDa and 100-kDa molecules which are distinct from the known Cry1Ab receptors. In addition, separate blotting experiments with Vip3A-G did not show binding to isolated Cry1A receptors, such as M. sexta APN protein, or a cadherin Cry1Ab ecto-binding domain. In voltage clamping assays with dissected midgut from the susceptible insect, M. sexta, Vip3A-G clearly formed pores, whereas Vip3A-F was incapable of pore formation. In the same assay, Vip3A-G was incapable of forming pores with larvae of the nonsusceptible insect, monarch butterfly, Danaus plexippus (Linnaeus). In planar lipid bilayers, both Vip3A-G and Vip3A-T formed stable ion channels in the absence of any receptors, supporting pore formation as an inherent property of Vip3A. Both Cry1Ab and Vip3A channels were voltage independent and highly cation selective; however, they differed considerably in their principal conductance state and cation specificity. The mode of action of Vip3A supports its use as a novel insecticidal agent.