Discovery of Potential Anti-Microbial Molecules and Spectrum Correlation Effect of Ardisia crenata Sims via High-Performance Liquid Chromatography Fingerprints and Molecular Docking.

Ardisia crenata Sims, an important ethnic medicine, is recorded in the Chinese Pharmacopoeia for treating laryngeal diseases and upper respiratory tract infections. This study aimed to evaluate the antimicrobial effect of extracts and potential antimicrobial compounds of A. crenata Sims. It was found that the roots of A. crenata Sims have a potential inhibitory effect on Candida albicans and Aspergillus flavus, with MICs of 1.56 mg/mL and 0.39 mg/mL, and the leaves of A. crenata Sims have a potential inhibitory effect on Pseudomonas aeruginosa and Staphylococcus aureus, with MICs of 3.12 mg/mL and 6.77 mg/mL, respectively. Meanwhile, five compounds including one catechin and four bergenins were obtained from roots. These components were identified on the fingerprint spectrum, representing chromatographic peaks 16, 21, 22, 23, and 25, respectively. Among these, 11-ß-d-glucopyranosyl-bergenin and (-)-gallocatechin showed potential inhibition for Staphylococcus aureus and Pseudomonas aeruginosa with MIC of 0.26 and 0.33 mg/mL, respectively. The roots, stems, and leaves of A. crenata Sims are very similar in chemical composition, with large differences in content. Principal component analysis (PCA) and Hierarchical cluster analysis (HCA) showed that 16 batches of A. crenata Sims could be divided into four main production areas: Guizhou, Jiangsu, Guangxi, and Jiangxi. Furthermore, molecular docking results showed that 11-ß-d-glucopyranosyl-bergenin had a better affinity for Casein lytic proteinase P (ClpP), and (-)-gallocatechin possessed a strong affinity for LasA hydrolysis protease and LasB elastase. These findings suggest catechin and bergenins from A. crenata Sims can be used as antimicrobial activity molecules.

Safety and tissue remodeling assay of small intestinal submucosa meshes using a modified porcine surgical hernia model.

In studies to date, meshes based on extracellular matrix (ECM) have been extensively used in clinical applications. Unfortunately, little is known about the function of the immunogenic residual, absorbable profile during the tissue repair process. Moreover, there needs to be a recognized preclinical animal model to investigate the safety and efficacy of extracellular matrix meshes. Herein, we designed and fabricated a kind of SIS mesh followed by a scanned electron micrograph characterization and tested α-Gal antigen clearance rate and DNA residual. In order to prove the biocompatibility of the SIS mesh, cell viability, chemotaxis assay and local tissue reaction were assessed by MTT and RTCA cytotoxicity test in vitro as well as implantation and degradation experiments in vivo. Furthermore, we developed a stable preclinical animal model in the porcine ventral hernia repair investigation, which using laparoscopic plus open hybridization method to evaluate tissue adhesion, explant mechanical performance, and histologic analysis after mesh implantation. More importantly, we established a semi-quantitative scoring system to examine the ECM degradation, tissue remodeling and regeneration in the modified porcine surgical hernia model for the first time. Our results highlight the application prospect of the improved porcine ventral hernia model for the safety and efficacy investigation of hernia repair meshes.

New and Antifungal Diterpenoids of Sunflower against Gray Mold.

Sunflower (Helianthus annuus L.) is cultivated around the world as an oil crop, and its receptacle is the byproduct and is usually deemed to be an agro-industrial waste. Then, phytochemical constituents and antifungal bioactivity of the sunflower receptacle against phytopathogenic fungi were investigated. As a result, 17 diterpenoids including 4 new compounds were isolated, and most of them showed potential antifungal activity against Botrytis cinerea, in which compounds 1, 3, 5, and 15 exhibited better inhibitory effect with the minimum inhibitory concentration values of 0.05-0.1 mg/mL. Meanwhile, four antifungal diterpenoids destructed plasma membrane integrity, suspended the biofilm formation ability, and increased the extravasation of cellular contents of B. cinerea. Moreover, the EtOAc extract of sunflower receptacle could keep 42.9% of blueberries from the invasion of B. cinerea at 1.6 mg/mL. The finding suggested that sunflower receptacle might be a biocontrol agent for preventing fruit from postharvest diseases.

Ormosianines A-P, Structurally Diverse Quinolizidine Alkaloids with AChE Inhibitory Effects from Ormosia yunnanensis.

Sixteen new quinolizidine alkaloids (QAs), named ormosianines A-P (1-16), and 18 known congeners (17-34) were isolated from the stems and leaves of Ormosia yunnanensis. The structures were elucidated based on spectroscopic analyses and electron circular dichroism (ECD) calculations. Structurally, ormosianines A (1) and B (2) are the first examples of cytisine and Ormosia-type alkaloids with the cleavage of the piperidine ring. Results of the acetylcholinesterase (AChE) inhibitory assay revealed that the pentacycline Ormosia-type QAs, including 1, 16, 24, and 27-29, are good AChE inhibitors. Ormosianine A (1) exhibited more potent AChE inhibitory activity with an IC50 value of 1.55 µM. Molecular docking revealed that 1 might bind to the protein 1DX4, forming two hydrogen bonds with residues SER-238 and HIS-480.

Focal Mechanism and Source Parameters Analysis of Mining-Induced Earthquakes Based on Relative Moment Tensor Inversion.

Mining-induced earthquakes (MIEs) in underground coal mines have been a common phenomenon that easily triggers rock bursts, but the mechanism is not understood clearly. This research investigates the laws of focal mechanism and source parameters based on focal mechanism and source parameters analysis of MIEs in three frequent rock burst areas. The relative moment tensor inversion (MTI) method was introduced, and the way to construct the inversion matrix was modified. The minimum ray and source number conditions were calculated, and an optimized identification criterion for source rupture type was proposed. Results show that the geological structure, stress environment, and source horizon influence the focal mechanism. The tensile type sources can distribute in the roof and coal seam, while the shear types are primarily located in the coal seam. In the typical fold structure area, the difference in source rupture strength and stress adjustment between tensile and shear types is negligible, while the disturbance scale of tensile types is distinct. The shear types have higher apparent volume and seismic moment in the deep buried fault area but lower source energy. The apparent stress of the tensile types is higher than that of the shear types, representing that the stress concentration still exists in the roof after the MIEs, but the stress near the faults could be effectively released. In the high-stress roadway pillar area, the primary fracture of the coal pillar easily produces a continuous shear rupture along the dominant stress direction under the extrusion of the roof and floor. The source parameters (except apparent stress) of shear types are higher than tensile types and have higher dynamic risk. The results contribute to expanding the understanding of rock burst mechanisms and guide MIEs' prevention.

Evolution Characteristics of Seismic Detection Probability in Underground Mines and Its Application for Assessing Seismic Risks-A Case Study.

Seismic hazards are typical mining hazards causing dynamic failure of coal and rock mass, which greatly threatens the safety of personnel and equipment. At present, various seismic analysis methods are used to assess seismic risks but their accuracy is significantly limited by the incompleteness of seismic data. The probability of detecting earthquakes (PDE) method has been proven as a powerful means for retrieving missed seismic events and enhancing the seismic data integrity in mines. However, to date, the reliability of the results of the PDE method has not been assessed and the highly integrated seismic data have not been linked with the actual hazard potential. To fill these gaps, this paper investigated the impacts of the seismic data volume used for calculation and the modification of the layout of sensors on the reliability and robustness of the PDE method. The event counts and seismic energy were compensated using the PDE method, correlated with strong seismic events. The results indicated that the compensated seismic data presented higher accuracy in locating future hazardous events than before. This research provides references on enhancing the performance of seismic analysing methods for seismic risk assessments.

Clinical Significance of Hyperdense Lesions on Non-enhanced Brain CT Obtained Immediately after Arterial Revascularization in Acute Ischemic Stroke Patients.

PURPOSE: To analyze the characteristics of hyperdense lesions on brain CT conducted immediately after arterial revascularization (AR) in patients with acute ischemic stroke (AIS), track the outcome of those lesions and investigate their clinical significance. MATERIALS AND METHODS: 97 AIS patients were enrolled in our study. Among them, 52 patients showed hyperdense lesions and were divided into three categories: type I, type II and type III according to the morphologic characteristics of hyperdense lesions. All patients underwent several follow-up CT/MR examinations to visualize the outcomes of the lesions. RESULTS: Among the 52 patients, 22 showed contrast extravasation, 23 displayed contrast extravasation combined with hemorrhagic transformation (HT) and 7 confirmed symptomatic intracranial hemorrhage (SICH) in follow-up CT/MR. Among the without hyperdense lesions group, only 7 converted to hemorrhage, and no SICH occurred. All type I lesions showed contrast extravasation; 23 type II lesions turned to hemorrhage, 2 revealed SICH and 6 were pure contrast extravasation; all of the type III developed into SICH. CONCLUSION: Hyperdense lesions on non-enhanced brain CT obtained immediately after arterial revascularization (AR) exhibited varying features. Type I indicated a pure contrast extravasation. Type II and type III hyperdense lesions suggested higher incidence of HT, the presence of type III lesions indicated an ominous outcome.

Genus Alangium - A review on its traditional uses, phytochemistry and pharmacological activities.

The species from Alangium have been used as folk medicine to treat rheumatism, skin diseases, diabetes by the people of Southeast Asia. Previous phytochemical studies have shown this genus are rich sources of alkaloids, glycosides, and terpenoids, which have attracted considerable attention of many researchers due to their markedly diverse and complex architecture. The crude extracts as well as the monomeric compounds from the title genus possess anti-tumor, anti-inflammatory, antibacterial, anti-oxidant pharmacological activities. Besides, some isolates from Alangium exhibited the effects on skeletal, smooth muscle and the nervous system. As a large genus of medicinal plants, the medicinal value of Alangium has been widely reported, but there is no review that provide a systematic summary towards its chemical constituents and pharmacological activities, to our knowledge. This work aims to present a comprehensive overview on the traditional uses, phytochemistry, and pharmacological activities of medicinal plants in the genus Alangium, and to explore the evidence supporting its ethnopharmacological effectiveness.

Prognostic Role Of Computed Tomography Textural Features In Early-Stage Non-Small Cell Lung Cancer Patients Receiving Stereotactic Body Radiotherapy.

PURPOSE: The imaging features of patients with early-stage non-small cell lung cancer (NSCLC) receiving stereotactic body radiotherapy (SBRT) are crucial for the decision-making process to establish a treatment plan. The purpose of this study was to predict the clinical outcomes of SBRT from the textural features of pretreatment computed tomography (CT) images. PATIENTS AND METHODS: Forty-one early-stage NSCLC patients who received SBRT were included in this retrospective study. In total, 72 textural features were extracted from the pretreatment contrast-enhanced CT images. Survival analysis was used to identify high-risk groups for progression-free survival (PFS) and disease-specific survival (DSS). Receiver operating characteristic (ROC) curve analysis was utilized to estimate the diagnostic abilities of the textural parameters. Univariable and multivariable Cox regression analyses were performed to evaluate the predictors of PFS and DSS. RESULTS: Four parameters, including entropy (P=0.003), second angular moment (SAM) (P=0.04), high-intensity long-run emphasis (HILRE) (P=0.046) and long-run emphasis (LRE) (P=0.042), were significant prognostic features for PFS. In addition, contrast (P=0.008), coarseness (P=0.017), low-intensity zone emphasis (LIZE) (P=0.01) and large number emphasis (LNE) (P=0.046) were significant prognostic factors for DSS. In the ROC analysis, the area under the curve (AUC) of coarseness for local recurrence (LR) was 0.722 (0.528-0.916), and the AUC of entropy for lymph node metastasis (LNM) was 0.771 (0.556-0.987). The four highest AUCs for distant metastasis (DM) were 0.885 (0.784-0.985) for LNE, 0.846 (0.733-0.959) for SAM, 0.731 (0.500-0.961) for LRE and 0.731 (0.585-0.876) for contrast. In the multivariable analysis, smoking and entropy were independent prognostic factors for PFS. CONCLUSION: This exploratory study reveals that textual features derived from pretreatment CT scans have prognostic value in early-stage NSCLC patients treated with SBRT.

Association of radiomic features with epidermal growth factor receptor mutation status in non-small cell lung cancer and survival treated with tyrosine kinase inhibitors.

Since the discovery of the fact that tyrosine kinase inhibitors could improve progression-free survival for patients with advanced non-small cell lung cancer compared with traditional chemotherapy, it has been extremely important to identify epidermal growth factor receptor mutation status in treatment stratification. Although lack of sufficient biopsy samples limit the precise detection of epidermal growth factor receptor mutation status in clinical practice, and it is difficult to identify the sensitive patients who confer favorable response to tyrosine kinase inhibitors. An increasing number of scholars tried to deal with these problems using methods based on the non-invasive imaging including computed tomography and PET to find the association with epidermal growth factor receptor mutation status and survival treated with tyrosine kinase inhibitor in non-small cell lung cancer. Although the conclusions have not reached a consensus, quantitative and high-throughput radiomics have brought us a new direction and might successfully help identify patients undergoing tyrosine kinase inhibitors who could get significant benefits.

Long-term in vivo study of biodegradable Zn-Cu stent: A 2-year implantation evaluation in porcine coronary artery.

In the present study, a novel biodegradable Zn-0.8Cu coronary artery stent was fabricated and implanted into porcine coronary arteries for up to 24 months. Micro-CT analysis showed that the implanted stent was able to maintain structural integrity after 6 months, while its disintegration occurred after 9 months of implantation. After 24 months of implantation, approximately 28 ±â€¯13 vol% of the stent remained. Optical coherence tomography and histological analysis showed that the endothelialization process could be completed within the first month after implantation, and no inflammation responses or thrombosis formation was observed within 24 months. Cross-section analysis indicated that the subsequent degradation products had been removed in the abluminal direction, guaranteeing that the strut could be replaced by normal tissue without the risk of contaminating the circulatory system, causing neither thrombosis nor inflammation response. The present work demonstrates that the Zn-0.8Cu stent has provided sufficient structural supporting and exhibited an appropriate degradation rate during 24 months of implantation without degradation product accumulation, thrombosis, or inflammation response. The results indicate that the Zn-0.8Cu coronary artery stent is promising for further clinical applications. STATEMENT OF SIGNIFICANCE: Although Zn and its alloys have been considered to be potential candidates of biodegradable metals for vascular stent use, by far, no Zn-based stent with appropriate medical device performance has been reported because of the low mechanical properties of zinc. The present work presents promising results of a Zn-Cu biodegradable vascular stent in porcine coronary arteries. The Zn-Cu stent fabricated in this work demonstrated adequate medical device performance both in vitro and in vivo and degraded at a proper rate without safety problems induced. Furthermore, large animal models have more cardiovascular similarities as humans. Results of this study may provide further information of the Zn-based stents for translational medicine research.

Hemocompatibility assay of a micro-catheter using hydrophilic coating biomaterials.

For medical devices directly or indirectly contacted with blood, hemocompatibility assay is of great importance during the biological evaluation. In ISO 10993-4:2017 - Biological evaluation of medical devices part 4, a selection of tests for interactions with blood is given with the rationale for selection of tests based on their intended use specified, however, the specific testing protocols may vary significantly when performing the hemocompatibility assays. In recent years, medical catheters have been widely used in clinical practice. Moreover, a lot of surface modified catheters emerged in the market to enhance their performance of hemocompatibility especially for hydrophilic coating catheters. Unfortunately, to date, the hemocompatibility of hydrophilic coating still remains controversial due to the inherent complexity of the hemocompatibility test itself and lack of validated test methods. In this study, through determining the hemocompatibility performance for a micro-catheter with a typical hydrophilic pyrrolidone coating regarding haemolysis test, partial thromboplastin time (PTT), prothrombin time (PT) and thrombogenicity test in dogs, we have established a series of tentative hemocompatibility protocols for these tests. Hopefully, our study could not only provide some useful information for hemocompatibility evaluation on medical catheters with a hydrophilic coating but could also contribute to the development of neo-type hemocompatible medical devices for better clinical practice.

Study of non-contrast helical computed tomography in evaluating holmium laser lithotripsy for urinary calculus.

The present study aimed to investigate the correlation between the parameters of non-contrast helical computed tomography (NCHCT) and the total energy of holmium laser lithotripsy, and establish a correlative mathematical model. From March 2016 to February 2017, 120 patients with a single urinary calculus were examined by NCHCT prior to holmium laser lithotripsy. The calculus location was confirmed, the CT value was measured and the volume of the calculus in the established three-dimensional reconstruction model was calculated. The total energy of lithotripsy (TEL) was recorded post-operatively. A significant difference in the TEL between renal calculi and ureteral calculi was identified (P<0.001) and a high and significant correlation between the volume of the calculus and the TEL was determined (Spearman r=0.827, P<0.001). A moderate correlation was identified between the CT value of the calculus and the TEL (Spearman r=0.468, P<0.001). Multivariate linear regression analysis revealed that the location, the volume and the CT value of the calculus were independently associated with the TEL (F=288.858, adjusted R2=0.879, P<0.01). A mathematical model correlating the parameters of NCHCT with the TEL was established, which may provide a foundation to guide the use of energy in holmium laser lithotripsy, and it was possible to estimate the TEL by the location, the volume and the CT value of the calculus.

[Research on Evaluating Method of Location of Dyeing Materials for Color Contact Lenses].

Combining frozen section and scanning electron microscopy experiments to observe the cross section and surface state of the samples, this study finds an effective method to evaluate the location of dyeing materials of color contact lenses. Sixty samples were evaluated on their dyeing location statistically using this method. The results showed that there were only 7 lots of samples with their dyeing materials within their product. This method is effective in evaluating the location of dyeing materials for color contact lenses.

Uniform carbon layer coated Mn3O4 nanorod anodes with improved reversible capacity and cyclic stability for lithium ion batteries.

A facile one-step solvothermal reaction route to large-scale synthesis of carbon homogeneously wrapped manganese oxide (Mn(3)O(4)@C) nanocomposites for anode materials of lithium ion batteries was developed using manganese acetate monohydrate and polyvinylpyrrolidone as precursors and reactants. The synthesized Mn(3)O(4)@C nanocomposites were characterized by X-ray diffraction, field-emission scanning electron microscopy, high resolution transmission electron microscopy, X-ray photoelectron spectroscopy, and Raman spectroscopy. The synthesized tetragonal structured Mn(3)O(4) (space group I41/amd) samples display nanorodlike morphology, with a width of about 200-300 nm and a thickness of about 15-20 nm. It is shown that the carbon layers with a thickness of 5 nm are homogeneously coated on the Mn(3)O(4) nanorods. It is indicated from lithium storage capacity estimation that the Mn(3)O(4)@C samples display enhanced capacity retention on charge/discharge cycling. Even after 50 cycles, the products remains stable capacity of 473 mA h g(-1), which is as much 3.05 times as that of pure Mn(3)O(4) samples. Because of the low-cost, nonpollution, and stable capacity, the carbon homogeneously coated Mn(3)O(4)@C nanocomposites are promising anode material for lithium ion batteries.

[Preparation of amylopectin modified dipyridamole liposome and its tissue distribution in mice].

AIM: To prepare amylopectin anchored dipyridamole (DIP) liposome and to study its tissue distribution in mice. METHODS: The regular DIP liposomes were prepared by film-scatter method. The amphiphilic O-palmitoyl amylopectin was synthesized and added to modify the surface of liposome. The entrapping efficiency, zeta potential, mean diameter, span of modified and regular liposomes were assayed. The RP-HPLC was used for the determination of DIP concentration in mice tissue. RESULTS: After modification, the entrapping efficiency depressed, zeta potential was raised, mean diameter and span had no obvious change. The level of DIP in lung, liver and spleen for regular liposomes were higher than that of injections. Compared with regular liposomes, the modified liposomes increased the DIP level in lung, and decreased the DIP level in liver, spleen, moreover, lengthened the retention time of DIP in lung. CONCLUSION: The distribution of modified liposome in mice was markedly changed as compared with regular liposomes and injections. The modified liposomes had obvious lung targeting property.