High light-quality OLEDs with a wet-processed single emissive layer.

High light-quality and low color temperature are crucial to justify a comfortable healthy illumination. Wet-process enables electronic devices cost-effective fabrication feasibility. We present herein low color temperature, blue-emission hazards free organic light emitting diodes (OLEDs) with very-high light-quality indices, that with a single emissive layer spin-coated with multiple blackbody-radiation complementary dyes, namely deep-red, yellow, green and sky-blue. Specifically, an OLED with a 1,854 K color temperature showed a color rendering index (CRI) of 90 and a spectrum resemblance index (SRI) of 88, whose melatonin suppression sensitivity is only 3% relative to a reference blue light of 480 nm. Its maximum retina permissible exposure limit is 3,454 seconds at 100 lx, 11, 10 and 6 times longer and safer than the counterparts of compact fluorescent lamp (5,920 K), light emitting diode (5,500 K) and OLED (5,000 K). By incorporating a co-host, tris(4-carbazoyl-9-ylphenyl)amine (TCTA), the resulting OLED showed a current efficiency of 24.9 cd/A and an external quantum efficiency of 24.5% at 100 cd/m2. It exhibited ultra-high light quality with a CRI of 93 and an SRI of 92. These prove blue-hazard free, high quality and healthy OLED to be fabrication feasible via the easy-to-apply wet-processed single emissive layer with multiple emitters.

Enabling a blue-hazard free general lighting based on candle light-style OLED.

Increasing studies report blue light to possess a potential hazard to the retina of human eyes, secretion of melatonin and artworks. To devise a human- and artwork-friendly light source and to also trigger a "Lighting Renaissance", we demonstrate here how to enable a quality, blue-hazard free general lighting source on the basis of low color-temperature organic light emitting diodes. With the use of multiple candlelight complementary emitters, the sensationally warm candle light-style emission is proven to be also drivable by electricity. To be energy-saving, highly efficient candle-light emission is demanded. The device shows, at 100 cd m-2 for example, an efficacy of 85.4 lm W-1, an external quantum efficiency of 27.4%, with a 79 spectrum resemblance index and 2,279 K color temperature. The high efficiency may be attributed to the candlelight emitting dyes with a high quantum yield, and the host molecules facilitating an effective host-to-guest energy transfer, as well as effective carrier injection balance.